Skip to content

Latest commit

 

History

History
654 lines (464 loc) · 27.5 KB

RELEASE.md

File metadata and controls

654 lines (464 loc) · 27.5 KB
Raw

RELEASE NOTES

v0.12.0 - Add Controller Data

  • TEDAPI: Add get_device_controller() to get device data which includes Powerwall THC_AmbientTemp data. Credit to @ygelfand for discovery and reported in jasonacox/Powerwall-Dashboard#392 (comment)
  • Updated vitals() to include Powerwall temperature data.
  • Proxy Updated to t66 to include API response for /tedapi/controller.
  • Remove Negative Solar Values [Option] by @jasonacox in #113
  • Solar-Only Cloud Access - Fix errors with site references by @Nexarian in #115

v0.11.1 - PW3 and FleetAPI Bugfix

  • TEDAPI: Fix bug with activeAlerts logic causing errors on systems with multiple Powerwall 3's. Identified by @rmotapar in jasonacox/Powerwall-Dashboard#387 (comment)
  • FleetAPI: Fix connect() to handle non-energy products in the getsites response. Identified by @gregrahn in #111

v0.11.0 - Add PW3 Vitals

  • Add polling of Powerwall 3 Devices to pull in PW3 specific string data, capacity, voltages, frequencies, and alerts.
  • This creates mock TEPOD, PVAC and PVS compatible payloads available in vitals().

Proxy URLs updated for PW3:

v0.10.10 - Add Grid Control

  • Add a function and command line options to allow user to get and set grid charging and exporting modes (see #108).
  • Supports FleetAPI and Cloud modes only (not Local mode)

Command Line Examples

# Connect to Cloud
python3 -m pypowerwall setup # or fleetapi

# Get Current Settings
python3 -m pypowerwall get

# Turn on Grid charging
python3 -m pypowerwall set -gridcharging on

# Turn off Grid charging
python3 -m pypowerwall  set -gridcharging off

# Set Grid Export to Solar (PV) energy only
python3 -m pypowerwall set -gridexport pv_only

# Set Grid Export to Battery and Solar energy
python3 -m pypowerwall set -gridexport battery_ok

# Disable export of all energy to grid
python3 -m pypowerwall set -gridexport never

Programming Examples

import pypowerwall

# FleetAPI Mode
PW_HOST=""
PW_EMAIL="[email protected]"
pw = pypowerwall.Powerwall(host=PW_HOST, email=PW_EMAIL, fleetapi=True)

# Get modes
pw.get_grid_charging()
pw.get_grid_export()

# Set modes
pw.set_grid_charging("on") # set grid charging mode (on or off)
pw.set_grid_export("pv_only")   # set grid export mode (battery_ok, pv_only, or never)

v0.10.9 - TEDAPI Voltage & Current

  • Add computed voltage and current to /api/meters/aggregates from TEDAPI status data.
  • Fix error in num_meters_aggregated calculation in aggregates.

v0.10.8 - TEDAPI Firmware Version

  • Add TEDAPI get_firmware_version() to poll Powerwall for firmware version. Discovered by @geptto in #97. This function has been integrated into pypowerwall existing APIs (e.g. pw.version())
  • Add TEDAPI get_components() and get_battery_block() functions which providing additional Powerwall 3 related device vital information for Powerwall 3 owners. Discovered by @lignumaqua in jasonacox/Powerwall-Dashboard#392 (comment). The plan it to integrate this data into the other device vitals payloads (TODO).

v0.10.7 - Energy History

  • FleetAPI - Add get_history() and get_calendar_history() to return energy, power, soe, and other history data.
import pypowerwall

pw = pypowerwall.Powerwall(host=PW_HOST, email=PW_EMAIL, fleetapi=True)
pw.client.fleet.get_calendar_history(kind="soe")
pw.client.fleet.get_history(kind="power")

v0.10.6 - pyLint Cleanup

  • Minor Bug Fixes - TEDAPI get_reserve() fix to address unscaled results.
  • pyLint Cleanup of Code

v0.10.5 - Minor Fixes

  • Fix for TEDAPI "full" (e.g. Powerwall 3) mode, including grid_status bug resulting in false reports of grid status, level() bug where data gap resulted in 0% state of charge and alerts() where data gap from tedapi resulted in a null alert.
  • Add TEDAPI API call locking to limit load caused by concurrent polling.
  • Proxy - Add battery full_pack and remaining energy data to /pod API call for all cases.

v0.10.4 - Powerwall 3 Local API Support

  • Add local support for Powerwall 3 using TEDAPI.
  • TEDAPI will activate in hybrid (using TEDAPI for vitals and existing local APIs for other metrics) or full (all data from TEDAPI) mode to provide better Powerwall 3 support.
  • The full mode will automatically activate when the customer password is blank and gw_pwd is set.
  • Note: The full mode will provide less metrics than hybrid mode since Powerwall 2/+ systems have additional APIs that are used in hybrid mode to fetch additional data
import pypowerwall

# Activate HYBRID mode (for Powerwall / 2 / + systems)
pw = pypowerwall.Powerwall("192.168.91.1", password=PASSWORD, email=EMAIL, gw_pwd=PW_GW_PWD)

# Activate FULL mode (for all systems including Powerwall 3)
pw = pypowerwall.Powerwall("192.168.91.1", gw_pwd=PW_GW_PWD)

Related:

v0.10.3 - TEDAPI Connect Update

  • Update setup.py to include dependencies on protobuf>=3.20.0.
  • Add TEDAPI connect() logic to better validate Gateway endpoint access.
  • Add documentation for TEDAPI setup.
  • Update CLI to support TEDAPI calls.
  • Proxy t60 - Fix edge case where /csv API will error due to NoneType inputs.
  • Add TEDAPI argument to set custom GW IP address.
# Connect to TEDAPI and pull data
python3 -m pypowerwall tedapi

# Direct call to TEDAPI class test function (optional password)
python3 -m pypowerwall.tedapi GWPASSWORD
python3 -m pypowerwall.tedapi --debug
python3 -m pypowerwall.tedapi --gw_ip 192.168.91.1 --debug

v0.10.2 - FleetAPI Hotfix

  • Fix FleetAPI setup script as raised in #98.
  • Update FleetAPI documentation and CLI usage.

v0.10.1 - TEDAPI Vitals Hotfix

  • Fix PVAC lookup error logic in TEDAPI class vitals() function.
  • Add alerts and other elements to PVAC TETHC TESYNC vitals.
  • Update vitals Neurio block to include correct location and adjust RealPower based on power scale factor.

v0.10.0 - New Device Vitals

  • Add support for /tedapi API access on Gateway (requires connectivity to 192.168.91.1 GW and Gateway Password) with access to "config" and "status" data.
  • Adds drop-in replacement for depreciated /vitals API and payload using the new TEDAPI class. This allows easy access to Powerwall device vitals.
  • Proxy update to t58 to support TEDAPI with environmental variable PW_GW_PWD for Gateway Password. Also added FleetAPI, Cloud and TEDAPI specific GET calls, /fleetapi, /cloud, and /tedapi respectively.
# How to Activate the TEDAPI Mode
import pypowerwall

gw_pwd = "GW_PASSWORD" # Gateway Passowrd usually on QR code on Gateway

host = "192.168.91.1" # Direct Connect to GW
pw = pypowerwall.Powerwall(host,password,email,timezone,gw_pwd=gw_pwd)
print(pw.vitals())
# New TEDAPI Class
import pypowerwall.tedapi

tedapi = pypowerwall.tedapi.TEDAPI("GW_PASSWORD")

config = tedapi.get_config()
status = tedapi.get_status()

meterAggregates = status.get('control', {}).get('meterAggregates', [])
for meter in meterAggregates:
    location = meter.get('location', 'Unknown').title()
    realPowerW = int(meter.get('realPowerW', 0))
    print(f"   - {location}: {realPowerW}W")

v0.9.1 - Bug Fixes and Updates

  • Fix bug in time_remaining_hours() and convert print statements in FleetAPI to log messages.
  • Fix CLI bug related to site_id as raised by @darroni in #93
  • Add CLI option for local mode to get status:
python -m pypowerwall get -host 10.1.2.3 -password 'myPassword'

v0.9.0 - FleetAPI Support

  • v0.9.0 - Tesla (official) FleetAPI cloud mode support by @jasonacox in #91 - This adds the FleetAPI class and mapping for pypowerwall.
  • FleetAPI setup provided by module CLI: python -m pypowerwall fleetapi
  • Adds auto_select mode for instatiating a Powerwall connection: local mode, fleetapi mode and cloud mode. Provides pw.mode class variable as the mode selected.
    import pypowerwall

    # Option 1 - LOCAL MODE - Credentials for your Powerwall - Customer Login
    password="password"
    email="[email protected]"
    host = "10.0.1.123"               # Address of your Powerwall Gateway
    timezone = "America/Los_Angeles"  # Your local timezone

    # Option 2 - FLEETAPI MODE - Requires Setup
    host = password = email = ""
    timezone = "America/Los_Angeles" 

    # Option 3 - CLOUD MODE - Requires Setup
    host = password = ""
    email='[email protected]'
    timezone = "America/Los_Angeles"
 
    # Connect to Powerwall - auto_select mode (local, fleetapi, cloud)
    pw = pypowerwall.Powerwall(host,password,email,timezone,auto_select=True)

    print(f"Connected to Powerwall with mode: {pw.mode}")

v0.8.5 - Solar Only

v0.8.4 - Set Reserve

  • Updated set_reserve(level) logic to handle levels from 0 to 100. Identified by @spoonwzd in #85

v0.8.3 - Error Handling

  • Added additional error handling logic to clean up exceptions.
  • Proxy: Added command APIs for setting backup reserve and operating mode.

v0.8.2 - 503 Error Handling

  • Added 5 minute cooldown for HTTP 503 Service Unavailable errors from API calls.
  • Proxy: Added DISABLED API handling logic.

v0.8.1 - Set battery reserve, operation mode

  • Added get_mode(), set_mode(),set_reserve(),and set_operation() function to set battery operation mode and/or reserve level by @emptywee in #78. Likely won't work in the local mode.
  • Added basic validation for main class __init__() parameters (a.k.a. user input).
  • Better handling of 401/403 errors from Powerwall in local mode.
  • Handle 50x errors from Powerwall in local mode.
  • Added Alerts for Grid Status alerts().
  • New command line functions (set and get):
usage: PyPowerwall [-h] {setup,scan,set,get,version} ...

PyPowerwall Module v0.8.1

options:
  -h, --help            show this help message and exit

commands (run <command> -h to see usage information):
  {setup,scan,set,get,version}
    setup               Setup Tesla Login for Cloud Mode access
    scan                Scan local network for Powerwall gateway
    set                 Set Powerwall Mode and Reserve Level
    get                 Get Powerwall Settings and Power Levels
    version             Print version information

v0.8.0 - Refactoring

  • Refactored pyPowerwall by @emptywee in #77 including:
    • Moved Local and Cloud based operation code into respective modules, providing better abstraction and making it easier to maintain and extend going forward.
    • Made meaning of the jsonformat parameter consistent across all method calls (breaking API change).
    • Removed Python 2.7 support.
    • Cleaned up code and adopted a more pythoinc style.
  • Fixed battery_blocks() for non-vitals systems.

v0.7.12 - Cachefile, Alerts & Strings

  • Added logic to pull string data from /api/solar_powerwall API if vitals data is not available by @jasonacox in #76.
  • Added alerts from /api/solar_powerwall when vitals not present by @DerickJohnson in #75. The vitals API is not present in firmware versions > 23.44, this provides a workaround to get alerts.
  • Allow customization of the cachefile location and name by @emptywee in #74 via cachefile parameter.
# Example
import pypowerwall
pw = pypowerwall.Powerwall(
     host="10.1.2.30",
     password="secret",
     email="[email protected]",
     timezone="America/Los_Angeles",
     pwcacheexpire=5, 
     timeout=5, 
     poolmaxsize=10,
     cloudmode=False, 
     siteid=None, 
     authpath="", 
     authmode="cookie",
     cachefile=".powerwall",
     )

v0.7.11 - Cooldown Mode

  • Updated logic to disable vitals API calls for Firmware 23.44.0+
  • Added rate limit detection and cooldown mode to allow Powerwall gateway time to recover.

v0.7.10 - Cache 404 Responses

  • Add cache and extended TTL for 404 responses from Powerwall as identified in issue jasonacox/Powerwall-Dashboard#449. This will help reduce load on Powerwall gateway that may be causing rate limiting for some users (Firmware 23.44.0+).

v0.7.9 - Cloud Grid Status

v0.7.8 - Cloud Fixes

  • Fix enumeration of energy sites during cloud mode setup to handle incomplete sites with Unknown names or types by @dcgibbons in #72
  • Proxy t41 Updates - Bug fixes for Solar-Only systems using cloud mode (see jasonacox/Powerwall-Dashboard#437).

v0.7.7 - Battery Data and Network Scanner

  • Proxy t40: Use /api/system_status battery blocks data to augment /pod and /freq macro data APIs by @jasonacox in #67 thanks to @ceeeekay in jasonacox/Powerwall-Dashboard#402 (comment)
  • Network Scanner: Improve network scan speed by scanning multiple hosts simultaneously by @mcbirse in #67. The number of hosts to scan simultaneously can be adjusted using the optional -hosts= argument (default = 30, maximum = 100), e.g. python -m pypowerwall scan -hosts=50

v0.7.6 - 404 Bug Fix

  • Fix Critical Bug - 404 HTTP Status Code Handling (Issue #65).

v0.7.5 - Cloud Mode Setup

  • Added optional email address argument to Cloud Mode setup (python -m pypowerwall setup -email=<email>) by @mcbirse in #64 to streamline Powerwall-Dashboard setup script.
  • Updated network scanner output to advise Powerwall 3 is supported in Cloud Mode by @mcbirse in #64

v0.7.4 - Bearer Token Auth

pyPowerwall Updates

  • This release adds the ability to use a Bearer Token for Authentication for the local Powerwall gateway API calls. This is selectable by defining authmode='token' in the initialization. The default mode uses the existing AuthCookie and UserRecord method.
import pypowerwall

pw = pypowerwall.Powerwall(HOST, PASSWORD, EMAIL, TIMEZONE, authmode="token")

Proxy

  • The above option is extended to the pyPowerwall Proxy via the environmental variable PW_AUTH_MODE set to cookie (default) or token.

Powerwall Network Scanner

  • Added optional IP address argument to network scanner by @mcbirse in #63. The Scan Function can now accept an additional argument -ip= to override the host IP address detection (python -m pypowerwall scan -ip=192.168.1.100). This may be useful where the host IP address/network cannot be detected correctly, for instance if pypowerwall is running inside a container.

v0.7.3 - Cloud Mode Setup

  • Setup will now check for PW_AUTH_PATH environmental variable to set the path for .pypowerwall.auth and .pypowerwall.site by @mcbirse in #62
  • Proxy t37 - Move signal handler to capture SIGTERM when proxy halts due to config error by @mcbirse in #62. This ensures a containerized proxy will exit without delay when stopping or restarting the container.

v0.7.2 - Cloud Auth Path

  • Add pypowerwall setting to define path to cloud auth cache and site files in the initialization. It will default to current directory.
  • Add pypowerwall setting to define energy site id in the initialization. It will default to None.
import pypowerwall

pw = pypowerwall.Powerwall(email="[email protected]",cloudmode=True,siteid=1234567,authpath=".auth")
  • Proxy will now use PW_AUTH_PATH as an environmental variable to set the path for .pypowerwall.auth and .pypowerwall.site.
  • Proxy also has PW_SITEID as an environmental variable to set siteid.

v0.7.1 - Tesla Cloud Mode

  • Simulate Powerwall Energy Gateway via Tesla Cloud API calls. In cloudmode API calls to pypowerwall APIs will result in calls made to the Tesla API to fetch the data.

Cloud Mode Setup - Use pypowerwall to fetch your Tesla Owners API Token

python3 -m pypowerwall setup

# Token and site information stored in .pypowerwall.auth and .pypowerwall.site

Cloud Mode Code Example

import pypowerwall
pw = pypowerwall.Powerwall(email="[email protected]",cloudmode=True)
pw.power()
# Output: {'site': 2977, 'solar': 1820, 'battery': -3860, 'load': 937}
pw.poll('/api/system_status/soe')
# Output: '{"percentage": 26.403205103271222}'
  • Added new API function to compute estimated backup time remaining on the battery: get_time_remaining()

v0.6.4 - Power Flow Animation

Proxy t29 Updates

  • Default page rendered by proxy (http://pypowerwall:8675/) will render Powerflow Animation
  • Animation assets (html, css, js, images, fonts, svg) will render from local filesystem instead of pulling from Powerwall TEG portal.
  • Start prep for possible API removals from Powerwall TEG portal (see NOAPI settings)

Powerwall Network Scanner

  • Adjust scan timeout default to 1,000ms (1s) to help with more consistent scans.

v0.6.3 - Powerwall 3 Scan

  • Added scan detection for new Powerwall 3 systems. API discovery is still underway so pypowerwall currently does not support Powerwall 3s. See jasonacox/Powerwall-Dashboard#387
$ python3 -m pypowerwall scan

pyPowerwall Network Scanner [0.6.3]
Scan local network for Tesla Powerwall Gateways

    Your network appears to be: 10.0.1.0/24

    Enter Network or press enter to use 10.0.1.0/24: 

    Running Scan...
      Host: 10.0.1.2 ... OPEN - Not a Powerwall
      Host: 10.0.1.5 ... OPEN - Found Powerwall 3 [Currently Unsupported]
      Host: 10.0.1.8 ... OPEN - Not a Powerwall
      Host: 10.0.1.9 ... OPEN - Found Powerwall 3 [Currently Unsupported]
      Done                           

Discovered 2 Powerwall Gateway
     10.0.1.5 [Powerwall-3] Firmware Currently Unsupported - See https://tinyurl.com/pw3support
     10.0.1.9 [Powerwall-3] Firmware Currently Unsupported - See https://tinyurl.com/pw3support

v0.6.2b - Proxy Grafana Support

  • Proxy t28: Add a grafana-dark style for PW_STYLE settings to accommodate placing as iframe in newer Grafana versions (e.g. v9.4.14). See jasonacox/Powerwall-Dashboard#371.

v0.6.2a - Proxy Graceful Exit

  • Add alert PVS_a036_PvArcLockout by @JordanBelford in #33
  • Create tessolarcharge.py by @venturanc in #36 & #37 & #38
  • Fix typos and spelling errors by @mcbirse in #40
  • Add alert definitions per #42 by @jasonacox in #43
  • Added two PVAC Alerts by @niabassey in #46
  • Added Firmware 23.28.1 to README.md by @niabassey in #48
  • Add proxy gracefully exit with SIGTERM by @rcasta74 in #49

v0.6.2 - Proxy Cache-Control

  • PyPI 0.6.2
  • Update docs for alerts by @DerickJohnson in #29 and #30
  • Fix Cache-Control no-cache header and allow for setting max-age, fixes #31 by @dkerr64 in #32

v0.6.1 - Add Grid Conditions

  • PyPI 0.6.1
  • Added new SystemMicroGridFaulted and SystemWaitForUser grid conditions to grid_status() function. Both are mapped to "DOWN" conditions. Discovery by @mcbrise in jasonacox/Powerwall-Dashboard#158 (comment).
  • Revised error handling of SITE_DATA request due to issues noted in #12 when multiple sites are linked to the Tesla account by @mcbirse in #25
  • Proxy t24: Added new /alerts/pw endpoint with dictionary/object response format by @DerickJohnson in #26

v0.6.0 - Add Persistent HTTP Connections

  • PyPI 0.6.0
  • Added HTTP persistent connections for API requests to Powerwall Gateway by @mcbirse in #21
  • Requests to Gateway will now re-use persistent http connections which reduces load and increases response time.
  • Uses default connection poolmaxsize=10 to align with Session object defaults. Note: pool use applies to multi-threaded use of pyPowerwall only, e.g. as with the pyPowerwall Proxy Server.
  • Added env PW_POOL_MAXSIZE to proxy server to allow this to be controlled (persistent connections disabled if set to zero).
  • Added env PW_TIMEOUT to proxy server to allow timeout on requests to be adjusted.

v0.5.1 - Fix grid_status() Off-Grid Map

  • PyPI 0.5.1
  • Add FreeBSD-specific installation instructions by @zi0r in #18
  • Add grid_status() responses for syncing to off-grid by @mcbirse in #19

v0.5.0 - Exception Handling for Powerwall Connection

  • PyPI 0.5.0
  • Added additional exception handling to help identify connection and login errors.
  • Added is_connected() function to test for a successful connection to the Powerwall.
  • Added firmware version to command line network scan (python -m pypowerwall scan)

Proxy Server Updates (Build t16) - See here for more Proxy Release notes.

  • Add support for backup switch by @nhasan in #12
  • Add passthrough to Powerwall web interface and customize for iFrame displays by @danisla in #14
  • Remove scrollbars from web view by @danisla in #15
  • Add support for specifying a bind address by @zi0r in #16
  • Add shebang for direct execution by @zi0r in #17

v0.4.0 - Cache Bypass Option and New Functions

  • PyPI 0.4.0
  • Added parameter to poll() to force call (ignore cache)
  • Added alerts() function to return an array of device alerts.
  • Added get_reserve() function to return battery reserve setting.
  • Added grid_status() function to return state of grid.
  • Added system_status() function to return system status.
  • Added battery_blocks() function to return battery specific information.
  • Expanded class to include settings for cache expiration (pwcacheexpire) and connection timeout.
# Force Poll
pw.poll('/api/system_status/soe',force=True)
'{"percentage":100}'

# Powerwall Alerts
pw.alerts()
['PodCommissionTime', 'GridCodesWrite', 'GridCodesWrite', 'FWUpdateSucceeded', 'THC_w155_Backup_Genealogy_Updated', 'PINV_a067_overvoltageNeutralChassis', 'THC_w155_Backup_Genealogy_Updated', 'PINV_a067_overvoltageNeutralChassis', 'PVS_a018_MciStringB', 'SYNC_a001_SW_App_Boot']

# Battery Reserve Setting
pw.get_reserve()
20.0

# State of Grid
pw.grid_status()
'UP'

v0.3.0 - Device Vitals Alerts and Attributes

  • PyPI 0.3.0
  • Added alerts and additional attributes from vitals() output.
  • Note: API change to vitals() output for dependant systems.

v0.2.0 - Tesla Protocol Buffer Scheme Update

  • PyPI 0.2.0
  • Breaking change to Protobuf schema (PR #2) including:
  • Files tesla.proto and tesla_pb2.py
  • Impacted output from function vitals() and examples/vitals.py.

v0.1.4 - Battery Level Percentage Scaling

  • PyPI 0.1.4
  • Changed "Network Scan" default timeout to 400ms for better detection.
  • Added Tesla App style "Battery Level Percentage" Conversion option to level() to convert the level reading to the 95% scale used by the App. This converts the battery level percentage to be consistent with the Tesla App:
>>> pw.level(scale=True)
39.971429212508326
>>> pw.level()
42.972857751882906

v0.1.3 - Powerwall Temps

  • PyPI 0.1.3
  • Added temp() function to pull Powerwall temperatures.
pw.temps(jsonformat=True)
{
    "TETHC--2012170-25-E--TGxxxxxxxxxxxx": 17.5,
    "TETHC--3012170-05-B--TGxxxxxxxxxxxx": 17.700000000000003
}

v0.1.2 - Error Handling and Proxy Stats

  • PyPI 0.1.2
  • Added better Error handling for calls to Powerwall with debug info for timeout and connection errors.
  • Added timestamp stats to pypowerwall proxy server.py (via URI /stats and /stats/clear)

pyPowerwall Debug

DEBUG:pypowerwall [0.1.2]

DEBUG:loaded auth from cache file .powerwall
DEBUG:Starting new HTTPS connection (1): 10.0.1.2:443
DEBUG:ERROR Timeout waiting for Powerwall API https://10.0.1.2/api/devices/vitals

Proxy Stats

{"pypowerwall": "0.1.2", "gets": 2, "errors": 3, "uri": {"/stats": 1, "/soe": 1}, "ts": 1641148636, "start": 1641148618, "clear": 1641148618}

v0.1.1 - New System Info Functions

  • PyPI 0.1.1
  • Added stats to pypowerwall proxy server.py (via URI /stats and /stats/clear)
  • Added Information Functions: site_name(), version(), din(), uptime(), and status().
     # Display System Info
     print("Site Name: %s - Firmware: %s - DIN: %s" % (pw.site_name(), pw.version(), pw.din()))
     print("System Uptime: %s\n" % pw.uptime())

v0.1.0 - Vitals Data

  • PyPI 0.1.0
  • Added protobuf handling to support decoding the Powerwall Device Vitals data (requires protobuf package)
  • Added function vitals() to pull Powerwall Device Vitals
  • Added function strings() to pull data on solar panel strings (Voltage, Current, Power and State)
     vitals = pw.vitals(jsonformat=False)
     strings = pw.strings(jsonformat=False, verbose=False)

v0.0.3 - Binary Poll Function, Proxy Server and Simulator

  • PyPI 0.0.3
  • Added Proxy Server - Useful for metrics gathering tools like telegraf (see proxy]).
  • Added Powerwall Simulator - Mimics Powerwall Gateway responses for testing (see pwsimulator])
  • Added raw binary poll capability to be able to pull protobuf formatted payloads like '/api/devices/vitals'.
     payload = pw.poll('/api/devices/vitals')

v0.0.2 - Scan Function

  • PyPI 0.0.2
  • pyPowerwall now has a network scan function to find the IP address of Powerwalls
# Scan Network for Powerwalls
python -m pypowerwall scan

Output Example:

pyPowerwall Network Scanner [0.0.2]
Scan local network for Tesla Powerwall Gateways

    Your network appears to be: 10.0.3.0/24

    Enter Network or press enter to use 10.0.3.0/24: 

    Running Scan...
      Host: 10.0.3.22 ... OPEN - Not a Powerwall
      Host: 10.0.3.45 ... OPEN - Found Powerwall 1234567-00-E--TG123456789ABC
      Done                           

Discovered 1 Powerwall Gateway
     10.0.1.45 [1234567-00-E--TG123456789ABC]

v0.0.1 - Initial Release

  • PyPI 0.0.1
  • Initial Beta Release 0.0.1