[SYCL] Support building on ARM #4

kpet · 2019-01-24T17:12:31Z

There are quite a few x86 assumptions that prevent building for ARM (e.g. cpuid, get_native_vector_width, etc)

The text was updated successfully, but these errors were encountered:

bader · 2019-01-24T23:07:18Z

I think we should move these to some platform specific layer and add ARM specific implementation.
There shouldn't be much places we need to change.

If there is only a single available value, all uses must be dominated by the single value and there is no need to search for a reaching definition. This drastically speeds up LCSSA in some cases. For the test case from PR37202, it speeds up LCSSA construction by 4 times. Time-passes without this patch for test case from PR37202: Total Execution Time: 29.9285 seconds (29.9276 wall clock) ---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name --- 5.2786 ( 17.7%) 0.0021 ( 1.2%) 5.2806 ( 17.6%) 5.2808 ( 17.6%) Unswitch loops 4.3739 ( 14.7%) 0.0303 ( 18.1%) 4.4042 ( 14.7%) 4.4042 ( 14.7%) Loop-Closed SSA Form Pass 4.2658 ( 14.3%) 0.0192 ( 11.5%) 4.2850 ( 14.3%) 4.2851 ( 14.3%) Loop-Closed SSA Form Pass #2 2.2307 ( 7.5%) 0.0013 ( 0.8%) 2.2320 ( 7.5%) 2.2318 ( 7.5%) Loop Invariant Code Motion 2.0888 ( 7.0%) 0.0012 ( 0.7%) 2.0900 ( 7.0%) 2.0897 ( 7.0%) Unroll loops 1.6761 ( 5.6%) 0.0013 ( 0.8%) 1.6774 ( 5.6%) 1.6774 ( 5.6%) Value Propagation 1.3686 ( 4.6%) 0.0029 ( 1.8%) 1.3716 ( 4.6%) 1.3714 ( 4.6%) Induction Variable Simplification 1.1457 ( 3.8%) 0.0010 ( 0.6%) 1.1468 ( 3.8%) 1.1468 ( 3.8%) Loop-Closed SSA Form Pass #4 1.1384 ( 3.8%) 0.0005 ( 0.3%) 1.1389 ( 3.8%) 1.1389 ( 3.8%) Loop-Closed SSA Form Pass #6 1.1360 ( 3.8%) 0.0027 ( 1.6%) 1.1387 ( 3.8%) 1.1387 ( 3.8%) Loop-Closed SSA Form Pass #5 1.1331 ( 3.8%) 0.0010 ( 0.6%) 1.1341 ( 3.8%) 1.1340 ( 3.8%) Loop-Closed SSA Form Pass #3 Time passes with this patch Total Execution Time: 19.2802 seconds (19.2813 wall clock) ---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name --- 4.4234 ( 23.2%) 0.0038 ( 2.0%) 4.4272 ( 23.0%) 4.4273 ( 23.0%) Unswitch loops 2.3828 ( 12.5%) 0.0020 ( 1.1%) 2.3848 ( 12.4%) 2.3847 ( 12.4%) Unroll loops 1.8714 ( 9.8%) 0.0020 ( 1.1%) 1.8734 ( 9.7%) 1.8735 ( 9.7%) Loop Invariant Code Motion 1.7973 ( 9.4%) 0.0022 ( 1.2%) 1.7995 ( 9.3%) 1.8003 ( 9.3%) Value Propagation 1.4010 ( 7.3%) 0.0033 ( 1.8%) 1.4043 ( 7.3%) 1.4044 ( 7.3%) Induction Variable Simplification 0.9978 ( 5.2%) 0.0244 ( 13.1%) 1.0222 ( 5.3%) 1.0224 ( 5.3%) Loop-Closed SSA Form Pass #2 0.9611 ( 5.0%) 0.0257 ( 13.8%) 0.9868 ( 5.1%) 0.9868 ( 5.1%) Loop-Closed SSA Form Pass 0.5856 ( 3.1%) 0.0015 ( 0.8%) 0.5871 ( 3.0%) 0.5869 ( 3.0%) Unroll loops #2 0.4132 ( 2.2%) 0.0012 ( 0.7%) 0.4145 ( 2.1%) 0.4143 ( 2.1%) Loop Invariant Code Motion #3 Reviewers: efriedma, davide, mzolotukhin Reviewed By: efriedma Differential Revision: https://reviews.llvm.org/D57033 llvm-svn: 352960

Summary: Scanning blocks in sub-loops for uses is unnecessary, as they were already handled while dealing with the containing sub-loop. This speeds up LCSSA for highly nested loops. For the test case in PR37202, it halves the time spent in LCSSA. In cases were we won't be able to skip any blocks, the additional lookup should be negligible. Time-passes without this patch for test case from PR37202: Total Execution Time: 48.5505 seconds (48.5511 wall clock) ---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name --- 10.0822 ( 21.0%) 0.1406 ( 27.0%) 10.2228 ( 21.1%) 10.2228 ( 21.1%) Loop-Closed SSA Form Pass 10.0417 ( 20.9%) 0.1467 ( 28.2%) 10.1884 ( 21.0%) 10.1890 ( 21.0%) Loop-Closed SSA Form Pass intel#2 4.2703 ( 8.9%) 0.0040 ( 0.8%) 4.2742 ( 8.8%) 4.2742 ( 8.8%) Unswitch loops 2.7376 ( 5.7%) 0.0229 ( 4.4%) 2.7605 ( 5.7%) 2.7611 ( 5.7%) Loop-Closed SSA Form Pass intel#5 2.7332 ( 5.7%) 0.0214 ( 4.1%) 2.7546 ( 5.7%) 2.7546 ( 5.7%) Loop-Closed SSA Form Pass intel#3 2.7088 ( 5.6%) 0.0230 ( 4.4%) 2.7319 ( 5.6%) 2.7324 ( 5.6%) Loop-Closed SSA Form Pass intel#4 2.6855 ( 5.6%) 0.0236 ( 4.5%) 2.7091 ( 5.6%) 2.7090 ( 5.6%) Loop-Closed SSA Form Pass intel#6 2.1648 ( 4.5%) 0.0018 ( 0.4%) 2.1666 ( 4.5%) 2.1664 ( 4.5%) Unroll loops 1.8371 ( 3.8%) 0.0009 ( 0.2%) 1.8379 ( 3.8%) 1.8380 ( 3.8%) Value Propagation 1.8149 ( 3.8%) 0.0021 ( 0.4%) 1.8170 ( 3.7%) 1.8169 ( 3.7%) Loop Invariant Code Motion 1.6755 ( 3.5%) 0.0226 ( 4.3%) 1.6981 ( 3.5%) 1.6980 ( 3.5%) Loop-Closed SSA Form Pass intel#7 Time-passes with this patch Total Execution Time: 29.9285 seconds (29.9276 wall clock) ---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name --- 5.2786 ( 17.7%) 0.0021 ( 1.2%) 5.2806 ( 17.6%) 5.2808 ( 17.6%) Unswitch loops 4.3739 ( 14.7%) 0.0303 ( 18.1%) 4.4042 ( 14.7%) 4.4042 ( 14.7%) Loop-Closed SSA Form Pass 4.2658 ( 14.3%) 0.0192 ( 11.5%) 4.2850 ( 14.3%) 4.2851 ( 14.3%) Loop-Closed SSA Form Pass intel#2 2.2307 ( 7.5%) 0.0013 ( 0.8%) 2.2320 ( 7.5%) 2.2318 ( 7.5%) Loop Invariant Code Motion 2.0888 ( 7.0%) 0.0012 ( 0.7%) 2.0900 ( 7.0%) 2.0897 ( 7.0%) Unroll loops 1.6761 ( 5.6%) 0.0013 ( 0.8%) 1.6774 ( 5.6%) 1.6774 ( 5.6%) Value Propagation 1.3686 ( 4.6%) 0.0029 ( 1.8%) 1.3716 ( 4.6%) 1.3714 ( 4.6%) Induction Variable Simplification 1.1457 ( 3.8%) 0.0010 ( 0.6%) 1.1468 ( 3.8%) 1.1468 ( 3.8%) Loop-Closed SSA Form Pass intel#4 1.1384 ( 3.8%) 0.0005 ( 0.3%) 1.1389 ( 3.8%) 1.1389 ( 3.8%) Loop-Closed SSA Form Pass intel#6 1.1360 ( 3.8%) 0.0027 ( 1.6%) 1.1387 ( 3.8%) 1.1387 ( 3.8%) Loop-Closed SSA Form Pass intel#5 1.1331 ( 3.8%) 0.0010 ( 0.6%) 1.1341 ( 3.8%) 1.1340 ( 3.8%) Loop-Closed SSA Form Pass intel#3 Reviewers: davide, efriedma, mzolotukhin Reviewed By: davide, efriedma Subscribers: hiraditya, dmgreen, llvm-commits Differential Revision: https://reviews.llvm.org/D56848 llvm-svn: 351567

Currently, the LLVM will print an error like Unsupported relocation: try to compile with -O2 or above, or check your static variable usage if user defines more than one static variables in a single ELF section (e.g., .bss or .data). There is ongoing effort to support static and global variables in libbpf and kernel. This patch removed the assertion so user programs with static variables won't fail compilation. The static variable in-section offset is written to the "imm" field of the corresponding to-be-relocated bpf instruction. Below is an example to show how the application (e.g., libbpf) can relate variable to relocations. -bash-4.4$ cat g1.c static volatile long a = 2; static volatile int b = 3; int test() { return a + b; } -bash-4.4$ clang -target bpf -O2 -c g1.c -bash-4.4$ llvm-readelf -r g1.o Relocation section '.rel.text' at offset 0x158 contains 2 entries: Offset Info Type Symbol's Value Symbol's Name 0000000000000000 0000000400000001 R_BPF_64_64 0000000000000000 .data 0000000000000018 0000000400000001 R_BPF_64_64 0000000000000000 .data -bash-4.4$ llvm-readelf -s g1.o Symbol table '.symtab' contains 6 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000000 0 FILE LOCAL DEFAULT ABS g1.c 2: 0000000000000000 8 OBJECT LOCAL DEFAULT 4 a 3: 0000000000000008 4 OBJECT LOCAL DEFAULT 4 b 4: 0000000000000000 0 SECTION LOCAL DEFAULT 4 5: 0000000000000000 64 FUNC GLOBAL DEFAULT 2 test -bash-4.4$ llvm-objdump -d g1.o g1.o: file format ELF64-BPF Disassembly of section .text: 0000000000000000 test: 0: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 2: 79 11 00 00 00 00 00 00 r1 = *(u64 *)(r1 + 0) 3: 18 02 00 00 08 00 00 00 00 00 00 00 00 00 00 00 r2 = 8 ll 5: 61 20 00 00 00 00 00 00 r0 = *(u32 *)(r2 + 0) 6: 0f 10 00 00 00 00 00 00 r0 += r1 7: 95 00 00 00 00 00 00 00 exit -bash-4.4$ . from symbol table, static variable "a" is in section #4, offset 0. . from symbol table, static variable "b" is in section #4, offset 8. . the first relocation is against symbol #4: 4: 0000000000000000 0 SECTION LOCAL DEFAULT 4 and in-section offset 0 (see llvm-objdump result) . the second relocation is against symbol #4: 4: 0000000000000000 0 SECTION LOCAL DEFAULT 4 and in-section offset 8 (see llvm-objdump result) . therefore, the first relocation is for variable "a", and the second relocation is for variable "b". Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: Yonghong Song <[email protected]> llvm-svn: 354954

Introduces memory leak in FunctionTest.GetPointerAlignment that breaks sanitizer buildbots: ``` ================================================================= ==2453==ERROR: LeakSanitizer: detected memory leaks Direct leak of 128 byte(s) in 1 object(s) allocated from: #0 0x610428 in operator new(unsigned long) /b/sanitizer-x86_64-linux-bootstrap/build/llvm/projects/compiler-rt/lib/asan/asan_new_delete.cc:105 #1 0x16936bc in llvm::User::operator new(unsigned long) /b/sanitizer-x86_64-linux-bootstrap/build/llvm/lib/IR/User.cpp:151:19 #2 0x7c3fe9 in Create /b/sanitizer-x86_64-linux-bootstrap/build/llvm/include/llvm/IR/Function.h:144:12 #3 0x7c3fe9 in (anonymous namespace)::FunctionTest_GetPointerAlignment_Test::TestBody() /b/sanitizer-x86_64-linux-bootstrap/build/llvm/unittests/IR/FunctionTest.cpp:136 #4 0x1a836a0 in HandleExceptionsInMethodIfSupported<testing::Test, void> /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/src/gtest.cc #5 0x1a836a0 in testing::Test::Run() /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/src/gtest.cc:2474 #6 0x1a85c55 in testing::TestInfo::Run() /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/src/gtest.cc:2656:11 #7 0x1a870d0 in testing::TestCase::Run() /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/src/gtest.cc:2774:28 #8 0x1aa5b84 in testing::internal::UnitTestImpl::RunAllTests() /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/src/gtest.cc:4649:43 #9 0x1aa4d30 in HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool> /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/src/gtest.cc #10 0x1aa4d30 in testing::UnitTest::Run() /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/src/gtest.cc:4257 #11 0x1a6b656 in RUN_ALL_TESTS /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/include/gtest/gtest.h:2233:46 #12 0x1a6b656 in main /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/UnitTestMain/TestMain.cpp:50 #13 0x7f5af37a22e0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202e0) Indirect leak of 40 byte(s) in 1 object(s) allocated from: #0 0x610428 in operator new(unsigned long) /b/sanitizer-x86_64-linux-bootstrap/build/llvm/projects/compiler-rt/lib/asan/asan_new_delete.cc:105 #1 0x151be6b in make_unique<llvm::ValueSymbolTable> /b/sanitizer-x86_64-linux-bootstrap/build/llvm/include/llvm/ADT/STLExtras.h:1349:29 #2 0x151be6b in llvm::Function::Function(llvm::FunctionType*, llvm::GlobalValue::LinkageTypes, unsigned int, llvm::Twine const&, llvm::Module*) /b/sanitizer-x86_64-linux-bootstrap/build/llvm/lib/IR/Function.cpp:241 #3 0x7c4006 in Create /b/sanitizer-x86_64-linux-bootstrap/build/llvm/include/llvm/IR/Function.h:144:16 #4 0x7c4006 in (anonymous namespace)::FunctionTest_GetPointerAlignment_Test::TestBody() /b/sanitizer-x86_64-linux-bootstrap/build/llvm/unittests/IR/FunctionTest.cpp:136 #5 0x1a836a0 in HandleExceptionsInMethodIfSupported<testing::Test, void> /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/src/gtest.cc #6 0x1a836a0 in testing::Test::Run() /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/src/gtest.cc:2474 #7 0x1a85c55 in testing::TestInfo::Run() /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/src/gtest.cc:2656:11 #8 0x1a870d0 in testing::TestCase::Run() /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/src/gtest.cc:2774:28 #9 0x1aa5b84 in testing::internal::UnitTestImpl::RunAllTests() /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/src/gtest.cc:4649:43 #10 0x1aa4d30 in HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool> /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/src/gtest.cc #11 0x1aa4d30 in testing::UnitTest::Run() /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/src/gtest.cc:4257 #12 0x1a6b656 in RUN_ALL_TESTS /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/googletest/include/gtest/gtest.h:2233:46 #13 0x1a6b656 in main /b/sanitizer-x86_64-linux-bootstrap/build/llvm/utils/unittest/UnitTestMain/TestMain.cpp:50 #14 0x7f5af37a22e0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202e0) SUMMARY: AddressSanitizer: 168 byte(s) leaked in 2 allocation(s). ``` See http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-bootstrap/builds/11358/steps/check-llvm%20asan/logs/stdio for more information. Also introduces use-of-uninitialized-value in ConstantsTest.FoldGlobalVariablePtr: ``` ==7070==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x14e703c in User /b/sanitizer-x86_64-linux-fast/build/llvm/include/llvm/IR/User.h:79:5 #1 0x14e703c in Constant /b/sanitizer-x86_64-linux-fast/build/llvm/include/llvm/IR/Constant.h:44 #2 0x14e703c in llvm::GlobalValue::GlobalValue(llvm::Type*, llvm::Value::ValueTy, llvm::Use*, unsigned int, llvm::GlobalValue::LinkageTypes, llvm::Twine const&, unsigned int) /b/sanitizer-x86_64-linux-fast/build/llvm/include/llvm/IR/GlobalValue.h:78 #3 0x14e5467 in GlobalObject /b/sanitizer-x86_64-linux-fast/build/llvm/include/llvm/IR/GlobalObject.h:34:9 #4 0x14e5467 in llvm::GlobalVariable::GlobalVariable(llvm::Type*, bool, llvm::GlobalValue::LinkageTypes, llvm::Constant*, llvm::Twine const&, llvm::GlobalValue::ThreadLocalMode, unsigned int, bool) /b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/Globals.cpp:314 #5 0x6938f1 in llvm::(anonymous namespace)::ConstantsTest_FoldGlobalVariablePtr_Test::TestBody() /b/sanitizer-x86_64-linux-fast/build/llvm/unittests/IR/ConstantsTest.cpp:565:18 #6 0x1a240a1 in HandleExceptionsInMethodIfSupported<testing::Test, void> /b/sanitizer-x86_64-linux-fast/build/llvm/utils/unittest/googletest/src/gtest.cc #7 0x1a240a1 in testing::Test::Run() /b/sanitizer-x86_64-linux-fast/build/llvm/utils/unittest/googletest/src/gtest.cc:2474 #8 0x1a26d26 in testing::TestInfo::Run() /b/sanitizer-x86_64-linux-fast/build/llvm/utils/unittest/googletest/src/gtest.cc:2656:11 #9 0x1a2815f in testing::TestCase::Run() /b/sanitizer-x86_64-linux-fast/build/llvm/utils/unittest/googletest/src/gtest.cc:2774:28 #10 0x1a43de8 in testing::internal::UnitTestImpl::RunAllTests() /b/sanitizer-x86_64-linux-fast/build/llvm/utils/unittest/googletest/src/gtest.cc:4649:43 #11 0x1a42c47 in HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool> /b/sanitizer-x86_64-linux-fast/build/llvm/utils/unittest/googletest/src/gtest.cc #12 0x1a42c47 in testing::UnitTest::Run() /b/sanitizer-x86_64-linux-fast/build/llvm/utils/unittest/googletest/src/gtest.cc:4257 #13 0x1a0dfba in RUN_ALL_TESTS /b/sanitizer-x86_64-linux-fast/build/llvm/utils/unittest/googletest/include/gtest/gtest.h:2233:46 #14 0x1a0dfba in main /b/sanitizer-x86_64-linux-fast/build/llvm/utils/unittest/UnitTestMain/TestMain.cpp:50 #15 0x7f2081c412e0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202e0) #16 0x4dff49 in _start (/b/sanitizer-x86_64-linux-fast/build/llvm_build_msan/unittests/IR/IRTests+0x4dff49) SUMMARY: MemorySanitizer: use-of-uninitialized-value /b/sanitizer-x86_64-linux-fast/build/llvm/include/llvm/IR/User.h:79:5 in User ``` See http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-fast/builds/30222/steps/check-llvm%20msan/logs/stdio for more information. llvm-svn: 355616

The assertion prevents it from applying fixes when used along with compilation databases with relative paths. Added a test that demonstrates the assertion failure. An example of the assertion: input.cpp:11:14: error: expected ';' after top level declarator typedef int T ^ ; input.cpp:11:14: note: FIX-IT applied suggested code changes clang-check: clang/tools/clang-check/ClangCheck.cpp:94: virtual std::string (anonymous namespace)::FixItOptions::RewriteFilename(const std::string &, int &): Assertion `llvm::sys::path::is_absolute(filename) && "clang-fixit expects absolute paths only."' failed. #0 llvm::sys::PrintStackTrace(llvm::raw_ostream&) llvm/lib/Support/Unix/Signals.inc:494:13 #1 llvm::sys::RunSignalHandlers() llvm/lib/Support/Signals.cpp:69:18 #2 SignalHandler(int) llvm/lib/Support/Unix/Signals.inc:357:1 #3 __restore_rt (/lib/x86_64-linux-gnu/libpthread.so.0+0x110c0) #4 raise (/lib/x86_64-linux-gnu/libc.so.6+0x32fcf) #5 abort (/lib/x86_64-linux-gnu/libc.so.6+0x343fa) #6 (/lib/x86_64-linux-gnu/libc.so.6+0x2be37) #7 (/lib/x86_64-linux-gnu/libc.so.6+0x2bee2) #8 void std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_construct<char*>(char*, char*, std::forward_iterator_tag) #9 void std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_construct_aux<char*>(char*, char*, std::__false_type) #10 void std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_construct<char*>(char*, char*) #11 std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::basic_string(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&) #12 (anonymous namespace)::FixItOptions::RewriteFilename(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, int&) clang/tools/clang-check/ClangCheck.cpp:101:0 #13 std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_data() const #14 std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_is_local() const #15 std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_dispose() #16 std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::~basic_string() #17 clang::FixItRewriter::WriteFixedFiles(std::vector<std::pair<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::allocator<std::pair<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > > > >*) clang/lib/Frontend/Rewrite/FixItRewriter.cpp:98:0 #18 std::__shared_ptr<clang::CompilerInvocation, (__gnu_cxx::_Lock_policy)2>::get() const #19 std::__shared_ptr_access<clang::CompilerInvocation, (__gnu_cxx::_Lock_policy)2, false, false>::_M_get() const #20 std::__shared_ptr_access<clang::CompilerInvocation, (__gnu_cxx::_Lock_policy)2, false, false>::operator->() const #21 clang::CompilerInstance::getFrontendOpts() clang/include/clang/Frontend/CompilerInstance.h:290:0 #22 clang::FrontendAction::EndSourceFile() clang/lib/Frontend/FrontendAction.cpp:966:0 #23 __gnu_cxx::__normal_iterator<clang::FrontendInputFile*, std::vector<clang::FrontendInputFile, std::allocator<clang::FrontendInputFile> > >::operator++() #24 clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) clang/lib/Frontend/CompilerInstance.cpp:943:0 #25 clang::tooling::FrontendActionFactory::runInvocation(std::shared_ptr<clang::CompilerInvocation>, clang::FileManager*, std::shared_ptr<clang::PCHContainerOperations>, clang::DiagnosticConsumer*) clang/lib/Tooling/Tooling.cpp:369:33 #26 clang::tooling::ToolInvocation::runInvocation(char const*, clang::driver::Compilation*, std::shared_ptr<clang::CompilerInvocation>, std::shared_ptr<clang::PCHContainerOperations>) clang/lib/Tooling/Tooling.cpp:344:18 #27 clang::tooling::ToolInvocation::run() clang/lib/Tooling/Tooling.cpp:329:10 #28 clang::tooling::ClangTool::run(clang::tooling::ToolAction*) clang/lib/Tooling/Tooling.cpp:518:11 #29 main clang/tools/clang-check/ClangCheck.cpp:187:15 llvm-svn: 357915

…heck. The assertion prevents it from applying fixes when used along with compilation databases with relative paths. Added a test that demonstrates the assertion failure. An example of the assertion: input.cpp:11:14: error: expected ';' after top level declarator typedef int T ^ ; input.cpp:11:14: note: FIX-IT applied suggested code changes clang-check: clang/tools/clang-check/ClangCheck.cpp:94: virtual std::string (anonymous namespace)::FixItOptions::RewriteFilename(const std::string &, int &): Assertion `llvm::sys::path::is_absolute(filename) && "clang-fixit expects absolute paths only."' failed. #0 llvm::sys::PrintStackTrace(llvm::raw_ostream&) llvm/lib/Support/Unix/Signals.inc:494:13 #1 llvm::sys::RunSignalHandlers() llvm/lib/Support/Signals.cpp:69:18 #2 SignalHandler(int) llvm/lib/Support/Unix/Signals.inc:357:1 #3 __restore_rt (/lib/x86_64-linux-gnu/libpthread.so.0+0x110c0) #4 raise (/lib/x86_64-linux-gnu/libc.so.6+0x32fcf) #5 abort (/lib/x86_64-linux-gnu/libc.so.6+0x343fa) #6 (/lib/x86_64-linux-gnu/libc.so.6+0x2be37) #7 (/lib/x86_64-linux-gnu/libc.so.6+0x2bee2) #8 void std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_construct<char*>(char*, char*, std::forward_iterator_tag) #9 void std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_construct_aux<char*>(char*, char*, std::__false_type) #10 void std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_construct<char*>(char*, char*) #11 std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::basic_string(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&) #12 (anonymous namespace)::FixItOptions::RewriteFilename(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, int&) clang/tools/clang-check/ClangCheck.cpp:101:0 #13 std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_data() const #14 std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_is_local() const #15 std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_dispose() #16 std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::~basic_string() #17 clang::FixItRewriter::WriteFixedFiles(std::vector<std::pair<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::allocator<std::pair<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > > > >*) clang/lib/Frontend/Rewrite/FixItRewriter.cpp:98:0 #18 std::__shared_ptr<clang::CompilerInvocation, (__gnu_cxx::_Lock_policy)2>::get() const #19 std::__shared_ptr_access<clang::CompilerInvocation, (__gnu_cxx::_Lock_policy)2, false, false>::_M_get() const #20 std::__shared_ptr_access<clang::CompilerInvocation, (__gnu_cxx::_Lock_policy)2, false, false>::operator->() const #21 clang::CompilerInstance::getFrontendOpts() clang/include/clang/Frontend/CompilerInstance.h:290:0 #22 clang::FrontendAction::EndSourceFile() clang/lib/Frontend/FrontendAction.cpp:966:0 #23 __gnu_cxx::__normal_iterator<clang::FrontendInputFile*, std::vector<clang::FrontendInputFile, std::allocator<clang::FrontendInputFile> > >::operator++() #24 clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) clang/lib/Frontend/CompilerInstance.cpp:943:0 #25 clang::tooling::FrontendActionFactory::runInvocation(std::shared_ptr<clang::CompilerInvocation>, clang::FileManager*, std::shared_ptr<clang::PCHContainerOperations>, clang::DiagnosticConsumer*) clang/lib/Tooling/Tooling.cpp:369:33 #26 clang::tooling::ToolInvocation::runInvocation(char const*, clang::driver::Compilation*, std::shared_ptr<clang::CompilerInvocation>, std::shared_ptr<clang::PCHContainerOperations>) clang/lib/Tooling/Tooling.cpp:344:18 #27 clang::tooling::ToolInvocation::run() clang/lib/Tooling/Tooling.cpp:329:10 #28 clang::tooling::ClangTool::run(clang::tooling::ToolAction*) clang/lib/Tooling/Tooling.cpp:518:11 #29 main clang/tools/clang-check/ClangCheck.cpp:187:15 ........ Breaks windows buildbots llvm-svn: 357918

Re-commit r357915 with a fix for windows. The assertion prevents it from applying fixes when used along with compilation databases with relative paths. Added a test that demonstrates the assertion failure. An example of the assertion: input.cpp:11:14: error: expected ';' after top level declarator typedef int T ^ ; input.cpp:11:14: note: FIX-IT applied suggested code changes clang-check: clang/tools/clang-check/ClangCheck.cpp:94: virtual std::string (anonymous namespace)::FixItOptions::RewriteFilename(const std::string &, int &): Assertion `llvm::sys::path::is_absolute(filename) && "clang-fixit expects absolute paths only."' failed. #0 llvm::sys::PrintStackTrace(llvm::raw_ostream&) llvm/lib/Support/Unix/Signals.inc:494:13 #1 llvm::sys::RunSignalHandlers() llvm/lib/Support/Signals.cpp:69:18 #2 SignalHandler(int) llvm/lib/Support/Unix/Signals.inc:357:1 #3 __restore_rt (/lib/x86_64-linux-gnu/libpthread.so.0+0x110c0) #4 raise (/lib/x86_64-linux-gnu/libc.so.6+0x32fcf) #5 abort (/lib/x86_64-linux-gnu/libc.so.6+0x343fa) #6 (/lib/x86_64-linux-gnu/libc.so.6+0x2be37) #7 (/lib/x86_64-linux-gnu/libc.so.6+0x2bee2) #8 void std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_construct<char*>(char*, char*, std::forward_iterator_tag) #9 void std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_construct_aux<char*>(char*, char*, std::__false_type) #10 void std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_construct<char*>(char*, char*) #11 std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::basic_string(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&) #12 (anonymous namespace)::FixItOptions::RewriteFilename(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, int&) clang/tools/clang-check/ClangCheck.cpp:101:0 #13 std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_data() const #14 std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_is_local() const #15 std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_dispose() #16 std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::~basic_string() #17 clang::FixItRewriter::WriteFixedFiles(std::vector<std::pair<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::allocator<std::pair<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > > > >*) clang/lib/Frontend/Rewrite/FixItRewriter.cpp:98:0 #18 std::__shared_ptr<clang::CompilerInvocation, (__gnu_cxx::_Lock_policy)2>::get() const #19 std::__shared_ptr_access<clang::CompilerInvocation, (__gnu_cxx::_Lock_policy)2, false, false>::_M_get() const #20 std::__shared_ptr_access<clang::CompilerInvocation, (__gnu_cxx::_Lock_policy)2, false, false>::operator->() const #21 clang::CompilerInstance::getFrontendOpts() clang/include/clang/Frontend/CompilerInstance.h:290:0 #22 clang::FrontendAction::EndSourceFile() clang/lib/Frontend/FrontendAction.cpp:966:0 #23 __gnu_cxx::__normal_iterator<clang::FrontendInputFile*, std::vector<clang::FrontendInputFile, std::allocator<clang::FrontendInputFile> > >::operator++() #24 clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) clang/lib/Frontend/CompilerInstance.cpp:943:0 #25 clang::tooling::FrontendActionFactory::runInvocation(std::shared_ptr<clang::CompilerInvocation>, clang::FileManager*, std::shared_ptr<clang::PCHContainerOperations>, clang::DiagnosticConsumer*) clang/lib/Tooling/Tooling.cpp:369:33 #26 clang::tooling::ToolInvocation::runInvocation(char const*, clang::driver::Compilation*, std::shared_ptr<clang::CompilerInvocation>, std::shared_ptr<clang::PCHContainerOperations>) clang/lib/Tooling/Tooling.cpp:344:18 #27 clang::tooling::ToolInvocation::run() clang/lib/Tooling/Tooling.cpp:329:10 #28 clang::tooling::ClangTool::run(clang::tooling::ToolAction*) clang/lib/Tooling/Tooling.cpp:518:11 #29 main clang/tools/clang-check/ClangCheck.cpp:187:15 llvm-svn: 357921

logging messages that are written the same, making it difficult to know for certain which code path was taken based on a logfile. Add some words to make each unique. Right now the ordering for finding a FullUnwindPlan (ignoring fallback unwind plan logic) is 1. If this is a _sigtramp like function, try eh_frame which is hand written on darwin systems to account for finding the saved register context correctly. 2. Ask the DynamicLoader if eh_frame should be preferred for this frame. Some binaries on the system may have hand-written eh_frame and the DynamicLoader is the source for this. (primarily this is for hand-written assembly in the objc runtime, and we tell lldb to trust that for functions in libobjc.dylib.) 3. if 0th frame, use GetUnwindPlanAtNonCallSite plan. 4. GetUnwindPlanAtCallSite {for 0th or any other} 5. GetUnwindPlanAtNonCallSite {now for non-0th frames, only if not from a compiler? hm.} 6. GetUnwindPlanArchitectureDefaultAtFunctionEntry if we're on the first instruction 7. Architectural default unwind plan ABI::CreateDefaultUnwindPlan I'm moving #6 -- DefaultAtFunctionEntry -- up to between #3 and #4, where we're already doing things specific to the zeroth frame. If we're on the zeroth frame and the GetUnwindPlanAtNonCallSite plan has failed for some reason, and we're on the first instruction, we should definitely use DefaultAtFunctionEntry instead of any other unwind plan. If we're trying to step out of some rando function on the system that we couldn't assembly instruction inspect, this is sufficient for us to step out of it. llvm-svn: 359847

The code is currently using the ambiguous instruction "sub sp, sp, w9, lsl #4". The ARM reference manual says this isn't valid, and it's not clear whether it's supposed to mean uxtw or uxtx. It doesn't matter which instruction we use here, since the high bits of the operand are zero anyway, so I arbitrarily choose uxtw, to preserve the register name. See https://reviews.llvm.org/D60840 for the LLVM patch. Differential Revision: https://reviews.llvm.org/D61770 llvm-svn: 360711

logging messages that are written the same, making it difficult to know for certain which code path was taken based on a logfile. Add some words to make each unique. Right now the ordering for finding a FullUnwindPlan (ignoring fallback unwind plan logic) is 1. If this is a _sigtramp like function, try eh_frame which is hand written on darwin systems to account for finding the saved register context correctly. 2. Ask the DynamicLoader if eh_frame should be preferred for this frame. Some binaries on the system may have hand-written eh_frame and the DynamicLoader is the source for this. (primarily this is for hand-written assembly in the objc runtime, and we tell lldb to trust that for functions in libobjc.dylib.) 3. if 0th frame, use GetUnwindPlanAtNonCallSite plan. 4. GetUnwindPlanAtCallSite {for 0th or any other} 5. GetUnwindPlanAtNonCallSite {now for non-0th frames, only if not from a compiler? hm.} 6. GetUnwindPlanArchitectureDefaultAtFunctionEntry if we're on the first instruction 7. Architectural default unwind plan ABI::CreateDefaultUnwindPlan I'm moving intel#6 -- DefaultAtFunctionEntry -- up to between intel#3 and intel#4, where we're already doing things specific to the zeroth frame. If we're on the zeroth frame and the GetUnwindPlanAtNonCallSite plan has failed for some reason, and we're on the first instruction, we should definitely use DefaultAtFunctionEntry instead of any other unwind plan. If we're trying to step out of some rando function on the system that we couldn't assembly instruction inspect, this is sufficient for us to step out of it. llvm-svn: 359847

The code is currently using the ambiguous instruction "sub sp, sp, w9, lsl intel#4". The ARM reference manual says this isn't valid, and it's not clear whether it's supposed to mean uxtw or uxtx. It doesn't matter which instruction we use here, since the high bits of the operand are zero anyway, so I arbitrarily choose uxtw, to preserve the register name. See https://reviews.llvm.org/D60840 for the LLVM patch. Differential Revision: https://reviews.llvm.org/D61770 llvm-svn: 360711

logging messages that are written the same, making it difficult to know for certain which code path was taken based on a logfile. Add some words to make each unique. Right now the ordering for finding a FullUnwindPlan (ignoring fallback unwind plan logic) is 1. If this is a _sigtramp like function, try eh_frame which is hand written on darwin systems to account for finding the saved register context correctly. 2. Ask the DynamicLoader if eh_frame should be preferred for this frame. Some binaries on the system may have hand-written eh_frame and the DynamicLoader is the source for this. (primarily this is for hand-written assembly in the objc runtime, and we tell lldb to trust that for functions in libobjc.dylib.) 3. if 0th frame, use GetUnwindPlanAtNonCallSite plan. 4. GetUnwindPlanAtCallSite {for 0th or any other} 5. GetUnwindPlanAtNonCallSite {now for non-0th frames, only if not from a compiler? hm.} 6. GetUnwindPlanArchitectureDefaultAtFunctionEntry if we're on the first instruction 7. Architectural default unwind plan ABI::CreateDefaultUnwindPlan I'm moving intel#6 -- DefaultAtFunctionEntry -- up to between intel#3 and intel#4, where we're already doing things specific to the zeroth frame. If we're on the zeroth frame and the GetUnwindPlanAtNonCallSite plan has failed for some reason, and we're on the first instruction, we should definitely use DefaultAtFunctionEntry instead of any other unwind plan. If we're trying to step out of some rando function on the system that we couldn't assembly instruction inspect, this is sufficient for us to step out of it. llvm-svn: 359847

The code is currently using the ambiguous instruction "sub sp, sp, w9, lsl intel#4". The ARM reference manual says this isn't valid, and it's not clear whether it's supposed to mean uxtw or uxtx. It doesn't matter which instruction we use here, since the high bits of the operand are zero anyway, so I arbitrarily choose uxtw, to preserve the register name. See https://reviews.llvm.org/D60840 for the LLVM patch. Differential Revision: https://reviews.llvm.org/D61770 llvm-svn: 360711

Looks like a MachinePipeliner algorithm problem found by sanitizer-x86_64-linux-fast. I will backout this test first while investigating the problem to unblock buildbot. ==49637==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x614000002e08 at pc 0x000004364350 bp 0x7ffe228a3bd0 sp 0x7ffe228a3bc8 READ of size 4 at 0x614000002e08 thread T0 #0 0x436434f in llvm::SwingSchedulerDAG::checkValidNodeOrder(llvm::SmallVector<llvm::NodeSet, 8u> const&) const /b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:3736:11 #1 0x4342cd0 in llvm::SwingSchedulerDAG::schedule() /b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:486:3 #2 0x434042d in llvm::MachinePipeliner::swingModuloScheduler(llvm::MachineLoop&) /b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:385:7 #3 0x433eb90 in llvm::MachinePipeliner::runOnMachineFunction(llvm::MachineFunction&) /b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:207:5 #4 0x428b7ea in llvm::MachineFunctionPass::runOnFunction(llvm::Function&) /b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachineFunctionPass.cpp:73:13 #5 0x4d1a913 in llvm::FPPassManager::runOnFunction(llvm::Function&) /b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1648:27 #6 0x4d1b192 in llvm::FPPassManager::runOnModule(llvm::Module&) /b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1685:16 #7 0x4d1c06d in runOnModule /b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1752:27 #8 0x4d1c06d in llvm::legacy::PassManagerImpl::run(llvm::Module&) /b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1865 #9 0xa48ca3 in compileModule(char**, llvm::LLVMContext&) /b/sanitizer-x86_64-linux-fast/build/llvm/tools/llc/llc.cpp:611:8 #10 0xa4270f in main /b/sanitizer-x86_64-linux-fast/build/llvm/tools/llc/llc.cpp:365:22 #11 0x7fec902572e0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202e0) #12 0x971b69 in _start (/b/sanitizer-x86_64-linux-fast/build/llvm_build_asan/bin/llc+0x971b69) llvm-svn: 363105

The arbitrary timeout when flushing GDB remote packets caused non-determinism and flakiness between test runs. I suspect it is what's causing the flakiness of the reproducer tests on GreenDragon, and want to see if removing it causes that to go away. This change was originally introduced in r197579 to discard a `$T02thread:01;#4` that QEMU was sending. If anybody knows how to test that this continues working after removing this code, I'd love to hear it. llvm-svn: 364669

This fixes a failing testcase on Fedora 30 x86_64 (regression Fedora 29->30): PASS: ./bin/lldb ./lldb-test-build.noindex/functionalities/unwind/noreturn/TestNoreturnUnwind.test_dwarf/a.out -o 'settings set symbols.enable-external-lookup false' -o r -o bt -o quit * frame #0: 0x00007ffff7aa6e75 libc.so.6`__GI_raise + 325 frame #1: 0x00007ffff7a91895 libc.so.6`__GI_abort + 295 frame #2: 0x0000000000401140 a.out`func_c at main.c:12:2 frame #3: 0x000000000040113a a.out`func_b at main.c:18:2 frame #4: 0x0000000000401134 a.out`func_a at main.c:26:2 frame #5: 0x000000000040112e a.out`main(argc=<unavailable>, argv=<unavailable>) at main.c:32:2 frame #6: 0x00007ffff7a92f33 libc.so.6`__libc_start_main + 243 frame #7: 0x000000000040106e a.out`_start + 46 vs. FAIL - unrecognized abort() function: ./bin/lldb ./lldb-test-build.noindex/functionalities/unwind/noreturn/TestNoreturnUnwind.test_dwarf/a.out -o 'settings set symbols.enable-external-lookup false' -o r -o bt -o quit * frame #0: 0x00007ffff7aa6e75 libc.so.6`.annobin_raise.c + 325 frame #1: 0x00007ffff7a91895 libc.so.6`.annobin_loadmsgcat.c_end.unlikely + 295 frame #2: 0x0000000000401140 a.out`func_c at main.c:12:2 frame #3: 0x000000000040113a a.out`func_b at main.c:18:2 frame #4: 0x0000000000401134 a.out`func_a at main.c:26:2 frame #5: 0x000000000040112e a.out`main(argc=<unavailable>, argv=<unavailable>) at main.c:32:2 frame #6: 0x00007ffff7a92f33 libc.so.6`.annobin_libc_start.c + 243 frame #7: 0x000000000040106e a.out`.annobin_init.c.hot + 46 The extra ELF symbols are there due to Annobin (I did not investigate why this problem happened specifically since F-30 and not since F-28). It is due to: Symbol table '.dynsym' contains 2361 entries: Valu e Size Type Bind Vis Name 0000000000022769 5 FUNC LOCAL DEFAULT _nl_load_domain.cold 000000000002276e 0 NOTYPE LOCAL HIDDEN .annobin_abort.c.unlikely ... 000000000002276e 0 NOTYPE LOCAL HIDDEN .annobin_loadmsgcat.c_end.unlikely ... 000000000002276e 0 NOTYPE LOCAL HIDDEN .annobin_textdomain.c_end.unlikely 000000000002276e 548 FUNC GLOBAL DEFAULT abort 000000000002276e 548 FUNC GLOBAL DEFAULT abort@@GLIBC_2.2.5 000000000002276e 548 FUNC LOCAL DEFAULT __GI_abort 0000000000022992 0 NOTYPE LOCAL HIDDEN .annobin_abort.c_end.unlikely Differential Revision: https://reviews.llvm.org/D63540 llvm-svn: 364773

For background of BPF CO-RE project, please refer to http://vger.kernel.org/bpfconf2019.html In summary, BPF CO-RE intends to compile bpf programs adjustable on struct/union layout change so the same program can run on multiple kernels with adjustment before loading based on native kernel structures. In order to do this, we need keep track of GEP(getelementptr) instruction base and result debuginfo types, so we can adjust on the host based on kernel BTF info. Capturing such information as an IR optimization is hard as various optimization may have tweaked GEP and also union is replaced by structure it is impossible to track fieldindex for union member accesses. Three intrinsic functions, preserve_{array,union,struct}_access_index, are introducted. addr = preserve_array_access_index(base, index, dimension) addr = preserve_union_access_index(base, di_index) addr = preserve_struct_access_index(base, gep_index, di_index) here, base: the base pointer for the array/union/struct access. index: the last access index for array, the same for IR/DebugInfo layout. dimension: the array dimension. gep_index: the access index based on IR layout. di_index: the access index based on user/debuginfo types. For example, for the following example, $ cat test.c struct sk_buff { int i; int b1:1; int b2:2; union { struct { int o1; int o2; } o; struct { char flags; char dev_id; } dev; int netid; } u[10]; }; static int (*bpf_probe_read)(void *dst, int size, const void *unsafe_ptr) = (void *) 4; #define _(x) (__builtin_preserve_access_index(x)) int bpf_prog(struct sk_buff *ctx) { char dev_id; bpf_probe_read(&dev_id, sizeof(char), _(&ctx->u[5].dev.dev_id)); return dev_id; } $ clang -target bpf -O2 -g -emit-llvm -S -mllvm -print-before-all \ test.c >& log The generated IR looks like below: ... define dso_local i32 @bpf_prog(%struct.sk_buff*) #0 !dbg !15 { %2 = alloca %struct.sk_buff*, align 8 %3 = alloca i8, align 1 store %struct.sk_buff* %0, %struct.sk_buff** %2, align 8, !tbaa !45 call void @llvm.dbg.declare(metadata %struct.sk_buff** %2, metadata !43, metadata !DIExpression()), !dbg !49 call void @llvm.lifetime.start.p0i8(i64 1, i8* %3) #4, !dbg !50 call void @llvm.dbg.declare(metadata i8* %3, metadata !44, metadata !DIExpression()), !dbg !51 %4 = load i32 (i8*, i32, i8*)*, i32 (i8*, i32, i8*)** @bpf_probe_read, align 8, !dbg !52, !tbaa !45 %5 = load %struct.sk_buff*, %struct.sk_buff** %2, align 8, !dbg !53, !tbaa !45 %6 = call [10 x %union.anon]* @llvm.preserve.struct.access.index.p0a10s_union.anons.p0s_struct.sk_buffs( %struct.sk_buff* %5, i32 2, i32 3), !dbg !53, !llvm.preserve.access.index !19 %7 = call %union.anon* @llvm.preserve.array.access.index.p0s_union.anons.p0a10s_union.anons( [10 x %union.anon]* %6, i32 1, i32 5), !dbg !53 %8 = call %union.anon* @llvm.preserve.union.access.index.p0s_union.anons.p0s_union.anons( %union.anon* %7, i32 1), !dbg !53, !llvm.preserve.access.index !26 %9 = bitcast %union.anon* %8 to %struct.anon.0*, !dbg !53 %10 = call i8* @llvm.preserve.struct.access.index.p0i8.p0s_struct.anon.0s( %struct.anon.0* %9, i32 1, i32 1), !dbg !53, !llvm.preserve.access.index !34 %11 = call i32 %4(i8* %3, i32 1, i8* %10), !dbg !52 %12 = load i8, i8* %3, align 1, !dbg !54, !tbaa !55 %13 = sext i8 %12 to i32, !dbg !54 call void @llvm.lifetime.end.p0i8(i64 1, i8* %3) #4, !dbg !56 ret i32 %13, !dbg !57 } !19 = distinct !DICompositeType(tag: DW_TAG_structure_type, name: "sk_buff", file: !3, line: 1, size: 704, elements: !20) !26 = distinct !DICompositeType(tag: DW_TAG_union_type, scope: !19, file: !3, line: 5, size: 64, elements: !27) !34 = distinct !DICompositeType(tag: DW_TAG_structure_type, scope: !26, file: !3, line: 10, size: 16, elements: !35) Note that @llvm.preserve.{struct,union}.access.index calls have metadata llvm.preserve.access.index attached to instructions to provide struct/union debuginfo type information. For &ctx->u[5].dev.dev_id, . The "%6 = ..." represents struct member "u" with index 2 for IR layout and index 3 for DI layout. . The "%7 = ..." represents array subscript "5". . The "%8 = ..." represents union member "dev" with index 1 for DI layout. . The "%10 = ..." represents struct member "dev_id" with index 1 for both IR and DI layout. Basically, traversing the use-def chain recursively for the 3rd argument of bpf_probe_read() and examining all preserve_*_access_index calls, the debuginfo struct/union/array access index can be achieved. The intrinsics also contain enough information to regenerate codes for IR layout. For array and structure intrinsics, the proper GEP can be constructed. For union intrinsics, replacing all uses of "addr" with "base" should be enough. Signed-off-by: Yonghong Song <[email protected]> Differential Revision: https://reviews.llvm.org/D61810 llvm-svn: 365352

For background of BPF CO-RE project, please refer to http://vger.kernel.org/bpfconf2019.html In summary, BPF CO-RE intends to compile bpf programs adjustable on struct/union layout change so the same program can run on multiple kernels with adjustment before loading based on native kernel structures. In order to do this, we need keep track of GEP(getelementptr) instruction base and result debuginfo types, so we can adjust on the host based on kernel BTF info. Capturing such information as an IR optimization is hard as various optimization may have tweaked GEP and also union is replaced by structure it is impossible to track fieldindex for union member accesses. Three intrinsic functions, preserve_{array,union,struct}_access_index, are introducted. addr = preserve_array_access_index(base, index, dimension) addr = preserve_union_access_index(base, di_index) addr = preserve_struct_access_index(base, gep_index, di_index) here, base: the base pointer for the array/union/struct access. index: the last access index for array, the same for IR/DebugInfo layout. dimension: the array dimension. gep_index: the access index based on IR layout. di_index: the access index based on user/debuginfo types. For example, for the following example, $ cat test.c struct sk_buff { int i; int b1:1; int b2:2; union { struct { int o1; int o2; } o; struct { char flags; char dev_id; } dev; int netid; } u[10]; }; static int (*bpf_probe_read)(void *dst, int size, const void *unsafe_ptr) = (void *) 4; #define _(x) (__builtin_preserve_access_index(x)) int bpf_prog(struct sk_buff *ctx) { char dev_id; bpf_probe_read(&dev_id, sizeof(char), _(&ctx->u[5].dev.dev_id)); return dev_id; } $ clang -target bpf -O2 -g -emit-llvm -S -mllvm -print-before-all \ test.c >& log The generated IR looks like below: ... define dso_local i32 @bpf_prog(%struct.sk_buff*) #0 !dbg !15 { %2 = alloca %struct.sk_buff*, align 8 %3 = alloca i8, align 1 store %struct.sk_buff* %0, %struct.sk_buff** %2, align 8, !tbaa !45 call void @llvm.dbg.declare(metadata %struct.sk_buff** %2, metadata !43, metadata !DIExpression()), !dbg !49 call void @llvm.lifetime.start.p0i8(i64 1, i8* %3) #4, !dbg !50 call void @llvm.dbg.declare(metadata i8* %3, metadata !44, metadata !DIExpression()), !dbg !51 %4 = load i32 (i8*, i32, i8*)*, i32 (i8*, i32, i8*)** @bpf_probe_read, align 8, !dbg !52, !tbaa !45 %5 = load %struct.sk_buff*, %struct.sk_buff** %2, align 8, !dbg !53, !tbaa !45 %6 = call [10 x %union.anon]* @llvm.preserve.struct.access.index.p0a10s_union.anons.p0s_struct.sk_buffs( %struct.sk_buff* %5, i32 2, i32 3), !dbg !53, !llvm.preserve.access.index !19 %7 = call %union.anon* @llvm.preserve.array.access.index.p0s_union.anons.p0a10s_union.anons( [10 x %union.anon]* %6, i32 1, i32 5), !dbg !53 %8 = call %union.anon* @llvm.preserve.union.access.index.p0s_union.anons.p0s_union.anons( %union.anon* %7, i32 1), !dbg !53, !llvm.preserve.access.index !26 %9 = bitcast %union.anon* %8 to %struct.anon.0*, !dbg !53 %10 = call i8* @llvm.preserve.struct.access.index.p0i8.p0s_struct.anon.0s( %struct.anon.0* %9, i32 1, i32 1), !dbg !53, !llvm.preserve.access.index !34 %11 = call i32 %4(i8* %3, i32 1, i8* %10), !dbg !52 %12 = load i8, i8* %3, align 1, !dbg !54, !tbaa !55 %13 = sext i8 %12 to i32, !dbg !54 call void @llvm.lifetime.end.p0i8(i64 1, i8* %3) #4, !dbg !56 ret i32 %13, !dbg !57 } !19 = distinct !DICompositeType(tag: DW_TAG_structure_type, name: "sk_buff", file: !3, line: 1, size: 704, elements: !20) !26 = distinct !DICompositeType(tag: DW_TAG_union_type, scope: !19, file: !3, line: 5, size: 64, elements: !27) !34 = distinct !DICompositeType(tag: DW_TAG_structure_type, scope: !26, file: !3, line: 10, size: 16, elements: !35) Note that @llvm.preserve.{struct,union}.access.index calls have metadata llvm.preserve.access.index attached to instructions to provide struct/union debuginfo type information. For &ctx->u[5].dev.dev_id, . The "%6 = ..." represents struct member "u" with index 2 for IR layout and index 3 for DI layout. . The "%7 = ..." represents array subscript "5". . The "%8 = ..." represents union member "dev" with index 1 for DI layout. . The "%10 = ..." represents struct member "dev_id" with index 1 for both IR and DI layout. Basically, traversing the use-def chain recursively for the 3rd argument of bpf_probe_read() and examining all preserve_*_access_index calls, the debuginfo struct/union/array access index can be achieved. The intrinsics also contain enough information to regenerate codes for IR layout. For array and structure intrinsics, the proper GEP can be constructed. For union intrinsics, replacing all uses of "addr" with "base" should be enough. The test case ThinLTO/X86/lazyload_metadata.ll is adjusted to reflect the new addition of the metadata. Signed-off-by: Yonghong Song <[email protected]> Differential Revision: https://reviews.llvm.org/D61810 llvm-svn: 365423

For background of BPF CO-RE project, please refer to http://vger.kernel.org/bpfconf2019.html In summary, BPF CO-RE intends to compile bpf programs adjustable on struct/union layout change so the same program can run on multiple kernels with adjustment before loading based on native kernel structures. In order to do this, we need keep track of GEP(getelementptr) instruction base and result debuginfo types, so we can adjust on the host based on kernel BTF info. Capturing such information as an IR optimization is hard as various optimization may have tweaked GEP and also union is replaced by structure it is impossible to track fieldindex for union member accesses. Three intrinsic functions, preserve_{array,union,struct}_access_index, are introducted. addr = preserve_array_access_index(base, index, dimension) addr = preserve_union_access_index(base, di_index) addr = preserve_struct_access_index(base, gep_index, di_index) here, base: the base pointer for the array/union/struct access. index: the last access index for array, the same for IR/DebugInfo layout. dimension: the array dimension. gep_index: the access index based on IR layout. di_index: the access index based on user/debuginfo types. If using these intrinsics blindly, i.e., transforming all GEPs to these intrinsics and later on reducing them to GEPs, we have seen up to 7% more instructions generated. To avoid such an overhead, a clang builtin is proposed: base = __builtin_preserve_access_index(base) such that user wraps to-be-relocated GEPs in this builtin and preserve_*_access_index intrinsics only apply to those GEPs. Such a buyin will prevent performance degradation if people do not use CO-RE, even for programs which use bpf_probe_read(). For example, for the following example, $ cat test.c struct sk_buff { int i; int b1:1; int b2:2; union { struct { int o1; int o2; } o; struct { char flags; char dev_id; } dev; int netid; } u[10]; }; static int (*bpf_probe_read)(void *dst, int size, const void *unsafe_ptr) = (void *) 4; #define _(x) (__builtin_preserve_access_index(x)) int bpf_prog(struct sk_buff *ctx) { char dev_id; bpf_probe_read(&dev_id, sizeof(char), _(&ctx->u[5].dev.dev_id)); return dev_id; } $ clang -target bpf -O2 -g -emit-llvm -S -mllvm -print-before-all \ test.c >& log The generated IR looks like below: ... define dso_local i32 @bpf_prog(%struct.sk_buff*) #0 !dbg !15 { %2 = alloca %struct.sk_buff*, align 8 %3 = alloca i8, align 1 store %struct.sk_buff* %0, %struct.sk_buff** %2, align 8, !tbaa !45 call void @llvm.dbg.declare(metadata %struct.sk_buff** %2, metadata !43, metadata !DIExpression()), !dbg !49 call void @llvm.lifetime.start.p0i8(i64 1, i8* %3) #4, !dbg !50 call void @llvm.dbg.declare(metadata i8* %3, metadata !44, metadata !DIExpression()), !dbg !51 %4 = load i32 (i8*, i32, i8*)*, i32 (i8*, i32, i8*)** @bpf_probe_read, align 8, !dbg !52, !tbaa !45 %5 = load %struct.sk_buff*, %struct.sk_buff** %2, align 8, !dbg !53, !tbaa !45 %6 = call [10 x %union.anon]* @llvm.preserve.struct.access.index.p0a10s_union.anons.p0s_struct.sk_buffs( %struct.sk_buff* %5, i32 2, i32 3), !dbg !53, !llvm.preserve.access.index !19 %7 = call %union.anon* @llvm.preserve.array.access.index.p0s_union.anons.p0a10s_union.anons( [10 x %union.anon]* %6, i32 1, i32 5), !dbg !53 %8 = call %union.anon* @llvm.preserve.union.access.index.p0s_union.anons.p0s_union.anons( %union.anon* %7, i32 1), !dbg !53, !llvm.preserve.access.index !26 %9 = bitcast %union.anon* %8 to %struct.anon.0*, !dbg !53 %10 = call i8* @llvm.preserve.struct.access.index.p0i8.p0s_struct.anon.0s( %struct.anon.0* %9, i32 1, i32 1), !dbg !53, !llvm.preserve.access.index !34 %11 = call i32 %4(i8* %3, i32 1, i8* %10), !dbg !52 %12 = load i8, i8* %3, align 1, !dbg !54, !tbaa !55 %13 = sext i8 %12 to i32, !dbg !54 call void @llvm.lifetime.end.p0i8(i64 1, i8* %3) #4, !dbg !56 ret i32 %13, !dbg !57 } !19 = distinct !DICompositeType(tag: DW_TAG_structure_type, name: "sk_buff", file: !3, line: 1, size: 704, elements: !20) !26 = distinct !DICompositeType(tag: DW_TAG_union_type, scope: !19, file: !3, line: 5, size: 64, elements: !27) !34 = distinct !DICompositeType(tag: DW_TAG_structure_type, scope: !26, file: !3, line: 10, size: 16, elements: !35) Note that @llvm.preserve.{struct,union}.access.index calls have metadata llvm.preserve.access.index attached to instructions to provide struct/union debuginfo type information. For &ctx->u[5].dev.dev_id, . The "%6 = ..." represents struct member "u" with index 2 for IR layout and index 3 for DI layout. . The "%7 = ..." represents array subscript "5". . The "%8 = ..." represents union member "dev" with index 1 for DI layout. . The "%10 = ..." represents struct member "dev_id" with index 1 for both IR and DI layout. Basically, traversing the use-def chain recursively for the 3rd argument of bpf_probe_read() and examining all preserve_*_access_index calls, the debuginfo struct/union/array access index can be achieved. The intrinsics also contain enough information to regenerate codes for IR layout. For array and structure intrinsics, the proper GEP can be constructed. For union intrinsics, replacing all uses of "addr" with "base" should be enough. Signed-off-by: Yonghong Song <[email protected]> llvm-svn: 365435

For background of BPF CO-RE project, please refer to http://vger.kernel.org/bpfconf2019.html In summary, BPF CO-RE intends to compile bpf programs adjustable on struct/union layout change so the same program can run on multiple kernels with adjustment before loading based on native kernel structures. In order to do this, we need keep track of GEP(getelementptr) instruction base and result debuginfo types, so we can adjust on the host based on kernel BTF info. Capturing such information as an IR optimization is hard as various optimization may have tweaked GEP and also union is replaced by structure it is impossible to track fieldindex for union member accesses. Three intrinsic functions, preserve_{array,union,struct}_access_index, are introducted. addr = preserve_array_access_index(base, index, dimension) addr = preserve_union_access_index(base, di_index) addr = preserve_struct_access_index(base, gep_index, di_index) here, base: the base pointer for the array/union/struct access. index: the last access index for array, the same for IR/DebugInfo layout. dimension: the array dimension. gep_index: the access index based on IR layout. di_index: the access index based on user/debuginfo types. If using these intrinsics blindly, i.e., transforming all GEPs to these intrinsics and later on reducing them to GEPs, we have seen up to 7% more instructions generated. To avoid such an overhead, a clang builtin is proposed: base = __builtin_preserve_access_index(base) such that user wraps to-be-relocated GEPs in this builtin and preserve_*_access_index intrinsics only apply to those GEPs. Such a buyin will prevent performance degradation if people do not use CO-RE, even for programs which use bpf_probe_read(). For example, for the following example, $ cat test.c struct sk_buff { int i; int b1:1; int b2:2; union { struct { int o1; int o2; } o; struct { char flags; char dev_id; } dev; int netid; } u[10]; }; static int (*bpf_probe_read)(void *dst, int size, const void *unsafe_ptr) = (void *) 4; #define _(x) (__builtin_preserve_access_index(x)) int bpf_prog(struct sk_buff *ctx) { char dev_id; bpf_probe_read(&dev_id, sizeof(char), _(&ctx->u[5].dev.dev_id)); return dev_id; } $ clang -target bpf -O2 -g -emit-llvm -S -mllvm -print-before-all \ test.c >& log The generated IR looks like below: ... define dso_local i32 @bpf_prog(%struct.sk_buff*) #0 !dbg !15 { %2 = alloca %struct.sk_buff*, align 8 %3 = alloca i8, align 1 store %struct.sk_buff* %0, %struct.sk_buff** %2, align 8, !tbaa !45 call void @llvm.dbg.declare(metadata %struct.sk_buff** %2, metadata !43, metadata !DIExpression()), !dbg !49 call void @llvm.lifetime.start.p0i8(i64 1, i8* %3) #4, !dbg !50 call void @llvm.dbg.declare(metadata i8* %3, metadata !44, metadata !DIExpression()), !dbg !51 %4 = load i32 (i8*, i32, i8*)*, i32 (i8*, i32, i8*)** @bpf_probe_read, align 8, !dbg !52, !tbaa !45 %5 = load %struct.sk_buff*, %struct.sk_buff** %2, align 8, !dbg !53, !tbaa !45 %6 = call [10 x %union.anon]* @llvm.preserve.struct.access.index.p0a10s_union.anons.p0s_struct.sk_buffs( %struct.sk_buff* %5, i32 2, i32 3), !dbg !53, !llvm.preserve.access.index !19 %7 = call %union.anon* @llvm.preserve.array.access.index.p0s_union.anons.p0a10s_union.anons( [10 x %union.anon]* %6, i32 1, i32 5), !dbg !53 %8 = call %union.anon* @llvm.preserve.union.access.index.p0s_union.anons.p0s_union.anons( %union.anon* %7, i32 1), !dbg !53, !llvm.preserve.access.index !26 %9 = bitcast %union.anon* %8 to %struct.anon.0*, !dbg !53 %10 = call i8* @llvm.preserve.struct.access.index.p0i8.p0s_struct.anon.0s( %struct.anon.0* %9, i32 1, i32 1), !dbg !53, !llvm.preserve.access.index !34 %11 = call i32 %4(i8* %3, i32 1, i8* %10), !dbg !52 %12 = load i8, i8* %3, align 1, !dbg !54, !tbaa !55 %13 = sext i8 %12 to i32, !dbg !54 call void @llvm.lifetime.end.p0i8(i64 1, i8* %3) #4, !dbg !56 ret i32 %13, !dbg !57 } !19 = distinct !DICompositeType(tag: DW_TAG_structure_type, name: "sk_buff", file: !3, line: 1, size: 704, elements: !20) !26 = distinct !DICompositeType(tag: DW_TAG_union_type, scope: !19, file: !3, line: 5, size: 64, elements: !27) !34 = distinct !DICompositeType(tag: DW_TAG_structure_type, scope: !26, file: !3, line: 10, size: 16, elements: !35) Note that @llvm.preserve.{struct,union}.access.index calls have metadata llvm.preserve.access.index attached to instructions to provide struct/union debuginfo type information. For &ctx->u[5].dev.dev_id, . The "%6 = ..." represents struct member "u" with index 2 for IR layout and index 3 for DI layout. . The "%7 = ..." represents array subscript "5". . The "%8 = ..." represents union member "dev" with index 1 for DI layout. . The "%10 = ..." represents struct member "dev_id" with index 1 for both IR and DI layout. Basically, traversing the use-def chain recursively for the 3rd argument of bpf_probe_read() and examining all preserve_*_access_index calls, the debuginfo struct/union/array access index can be achieved. The intrinsics also contain enough information to regenerate codes for IR layout. For array and structure intrinsics, the proper GEP can be constructed. For union intrinsics, replacing all uses of "addr" with "base" should be enough. Signed-off-by: Yonghong Song <[email protected]> Differential Revision: https://reviews.llvm.org/D61809 llvm-svn: 365438

keryell · 2019-07-18T21:50:00Z

@agozillon made some progress on compilation for ARM recently in triSYCL/sycl#47
If someone from ARM can contribute with a more definitive solution...

…s Sunday. Add accessors 'c_encoding' and 'iso_encoding' to provide different interpretations of the weekday. Remove 'operator unsigned' llvm-svn: 366981

Summary: feature coverage is a useful signal that is available during the merge process, but was not printed previously. Output example: ``` $ ./fuzzer -use_value_profile=1 -merge=1 new_corpus/ seed_corpus/ INFO: Seed: 1676551929 INFO: Loaded 1 modules (2380 inline 8-bit counters): 2380 [0x90d180, 0x90dacc), INFO: Loaded 1 PC tables (2380 PCs): 2380 [0x684018,0x68d4d8), MERGE-OUTER: 180 files, 78 in the initial corpus MERGE-OUTER: attempt 1 INFO: Seed: 1676574577 INFO: Loaded 1 modules (2380 inline 8-bit counters): 2380 [0x90d180, 0x90dacc), INFO: Loaded 1 PC tables (2380 PCs): 2380 [0x684018,0x68d4d8), INFO: -max_len is not provided; libFuzzer will not generate inputs larger than 1048576 bytes MERGE-INNER: using the control file '/tmp/libFuzzerTemp.111754.txt' MERGE-INNER: 180 total files; 0 processed earlier; will process 180 files now #1 pulse cov: 134 ft: 330 exec/s: 0 rss: 37Mb #2 pulse cov: 142 ft: 462 exec/s: 0 rss: 38Mb #4 pulse cov: 152 ft: 651 exec/s: 0 rss: 38Mb #8 pulse cov: 152 ft: 943 exec/s: 0 rss: 38Mb #16 pulse cov: 520 ft: 2783 exec/s: 0 rss: 39Mb #32 pulse cov: 552 ft: 3280 exec/s: 0 rss: 41Mb #64 pulse cov: 576 ft: 3641 exec/s: 0 rss: 50Mb #78 LOADED cov: 602 ft: 3936 exec/s: 0 rss: 88Mb #128 pulse cov: 611 ft: 3996 exec/s: 0 rss: 93Mb #180 DONE cov: 611 ft: 4016 exec/s: 0 rss: 155Mb MERGE-OUTER: succesfull in 1 attempt(s) MERGE-OUTER: the control file has 39741 bytes MERGE-OUTER: consumed 0Mb (37Mb rss) to parse the control file MERGE-OUTER: 9 new files with 80 new features added; 9 new coverage edges ``` Reviewers: hctim, morehouse Reviewed By: morehouse Subscribers: delcypher, #sanitizers, llvm-commits, kcc Tags: #llvm, #sanitizers Differential Revision: https://reviews.llvm.org/D66030 llvm-svn: 368617

…ymbol that belongs to a section with a broken sh_name" It broke BB: http://lab.llvm.org:8011/builders/clang-x86_64-debian-fast/builds/16955/steps/test/logs/stdio Expected<T> must be checked before access or destruction. Unchecked Expected<T> contained error: a section [index 1] has an invalid sh_name (0xffff) offset which goes past the end of the section name string tableStack dump: 0. Program arguments: /srv/llvm-buildbot-srcatch/llvm-build-dir/clang-x86_64-debian-fast/llvm.obj/bin/llvm-nm /srv/llvm-buildbot-srcatch/llvm-build-dir/clang-x86_64-debian-fast/llvm.obj/test/tools/llvm-nm/Output/format-sysv-section.test.tmp2.o --format=sysv #0 0x00000000008af7c4 PrintStackTraceSignalHandler(void*) (/srv/llvm-buildbot-srcatch/llvm-build-dir/clang-x86_64-debian-fast/llvm.obj/bin/llvm-nm+0x8af7c4) #1 0x00000000008ad8be llvm::sys::RunSignalHandlers() (/srv/llvm-buildbot-srcatch/llvm-build-dir/clang-x86_64-debian-fast/llvm.obj/bin/llvm-nm+0x8ad8be) #2 0x00000000008afbd8 SignalHandler(int) (/srv/llvm-buildbot-srcatch/llvm-build-dir/clang-x86_64-debian-fast/llvm.obj/bin/llvm-nm+0x8afbd8) #3 0x00007f0a6b989730 __restore_rt (/lib/x86_64-linux-gnu/libpthread.so.0+0x12730) #4 0x00007f0a6b48d7bb raise (/lib/x86_64-linux-gnu/libc.so.6+0x377bb) #5 0x00007f0a6b478535 abort (/lib/x86_64-linux-gnu/libc.so.6+0x22535) #6 0x000000000042004b llvm::Expected<llvm::StringRef>::fatalUncheckedExpected() const (/srv/llvm-buildbot-srcatch/llvm-build-dir/clang-x86_64-debian-fast/llvm.obj/bin/llvm-nm+0x42004b) #7 0x00000000008367f5 (/sv/llvm-buildbot-srcatch/llvm-build-dir/clang-x86_64-debian-fast/llvm.obj/bin/llvm-nm+0x8367f5) #8 0x0000000000817b80 llvm::object::IRObjectFile::findBitcodeInObject(llvm::object::ObjectFile const&) (/srv/llvm-buildbot-srcatch/llvm-build-dir/clang-x86_64-debian-fast/llvm.obj/bin/llvm-nm+0x817b80) #9 0x0000000000838416 llvm::object::SymbolicFile::createSymbolicFile(llvm::MemoryBufferRef, llvm::file_magic, llvm::LLVMContext*) (/srv/llvm-buildbot-srcatch/llvm-build-dir/clang-x86_64-debian-fast/llvm.obj/bin/llvm-nm+0x838416) #10 0x00000000007f36cb llvm::object::createBinary(llvm::MemoryBufferRef, llvm::LLVMContext*) (/srv/llvm-buildbot-srcatch/llvm-build-dir/clang-x86_64-debian-fast/llvm.obj/bin/llvm-nm+0x7f36cb) #11 0x0000000000413123 dumpSymbolNamesFromFile(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >&) (/srv/llvm-buildbot-srcatch/llvm-build-dir/clang-x86_64-debian-fast/llvm.obj/bin/llvm-nm+0x413123) #12 0x0000000000412e38 main (/srv/llvm-buildbot-srcatch/llvm-build-dir/clang-x86_64-debian-fast/llvm.obj/bin/llvm-nm+0x412e38) #13 0x00007f0a6b47a09b __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409b) #14 0x00000000004120da _start (/srv/llvm-buildbot-srcatch/llvm-build-dir/clang-x86_64-debian-fast/llvm.obj/bin/llvm-nm+0x4120da) FileCheck error: '-' is empty. FileCheck command line: /srv/llvm-buildbot-srcatch/llvm-build-dir/clang-x86_64-debian-fast/llvm.obj/bin/FileCheck /srv/llvm-buildbot-srcatch/llvm-build-dir/clang-x86_64-debian-fast/llvm.src/test/tools/llvm-nm/format-sysv-section.test --check-prefix=ERR -- llvm-svn: 370662

Summary: This reverts commit r372204. This change causes build bot failures under msan: http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-fast/builds/35236/steps/check-llvm%20msan/logs/stdio: ``` FAIL: LLVM :: DebugInfo/AArch64/asan-stack-vars.mir (19531 of 33579) ******************** TEST 'LLVM :: DebugInfo/AArch64/asan-stack-vars.mir' FAILED ******************** Script: -- : 'RUN: at line 1'; /b/sanitizer-x86_64-linux-fast/build/llvm_build_msan/bin/llc -O0 -start-before=livedebugvalues -filetype=obj -o - /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/test/DebugInfo/AArch64/asan-stack-vars.mir | /b/sanitizer-x86_64-linux-fast/build/llvm_build_msan/bin/llvm-dwarfdump -v - | /b/sanitizer-x86_64-linux-fast/build/llvm_build_msan/bin/FileCheck /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/test/DebugInfo/AArch64/asan-stack-vars.mir -- Exit Code: 2 Command Output (stderr): -- ==62894==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0xdfcafb in llvm::AArch64FrameLowering::resolveFrameOffsetReference(llvm::MachineFunction const&, int, bool, unsigned int&, bool, bool) const /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/Target/AArch64/AArch64FrameLowering.cpp:1658:3 #1 0xdfae8a in resolveFrameIndexReference /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/Target/AArch64/AArch64FrameLowering.cpp:1580:10 #2 0xdfae8a in llvm::AArch64FrameLowering::getFrameIndexReference(llvm::MachineFunction const&, int, unsigned int&) const /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/Target/AArch64/AArch64FrameLowering.cpp:1536 #3 0x46642c1 in (anonymous namespace)::LiveDebugValues::extractSpillBaseRegAndOffset(llvm::MachineInstr const&) /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/CodeGen/LiveDebugValues.cpp:582:21 #4 0x4647cb3 in transferSpillOrRestoreInst /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/CodeGen/LiveDebugValues.cpp:883:11 #5 0x4647cb3 in process /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/CodeGen/LiveDebugValues.cpp:1079 #6 0x4647cb3 in (anonymous namespace)::LiveDebugValues::ExtendRanges(llvm::MachineFunction&) /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/CodeGen/LiveDebugValues.cpp:1361 #7 0x463ac0e in (anonymous namespace)::LiveDebugValues::runOnMachineFunction(llvm::MachineFunction&) /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/CodeGen/LiveDebugValues.cpp:1415:18 #8 0x4854ef0 in llvm::MachineFunctionPass::runOnFunction(llvm::Function&) /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/CodeGen/MachineFunctionPass.cpp:73:13 #9 0x53b0b01 in llvm::FPPassManager::runOnFunction(llvm::Function&) /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/IR/LegacyPassManager.cpp:1648:27 #10 0x53b15f6 in llvm::FPPassManager::runOnModule(llvm::Module&) /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/IR/LegacyPassManager.cpp:1685:16 #11 0x53b298d in runOnModule /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/IR/LegacyPassManager.cpp:1750:27 #12 0x53b298d in llvm::legacy::PassManagerImpl::run(llvm::Module&) /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/IR/LegacyPassManager.cpp:1863 #13 0x905f21 in compileModule(char**, llvm::LLVMContext&) /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/tools/llc/llc.cpp:601:8 #14 0x8fdc4e in main /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/tools/llc/llc.cpp:355:22 #15 0x7f67673632e0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202e0) #16 0x882369 in _start (/b/sanitizer-x86_64-linux-fast/build/llvm_build_msan/bin/llc+0x882369) MemorySanitizer: use-of-uninitialized-value /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/Target/AArch64/AArch64FrameLowering.cpp:1658:3 in llvm::AArch64FrameLowering::resolveFrameOffsetReference(llvm::MachineFunction const&, int, bool, unsigned int&, bool, bool) const Exiting error: -: The file was not recognized as a valid object file FileCheck error: '-' is empty. FileCheck command line: /b/sanitizer-x86_64-linux-fast/build/llvm_build_msan/bin/FileCheck /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/test/DebugInfo/AArch64/asan-stack-vars.mir ``` Reviewers: bkramer Reviewed By: bkramer Subscribers: sdardis, aprantl, kristof.beyls, jrtc27, atanasyan, llvm-commits Tags: #llvm Differential Revision: https://reviews.llvm.org/D67710 llvm-svn: 372228

We'd like a way to select the current thread by its thread ID (rather than its internal LLDB thread index). This PR adds a `-t` option (`--thread_id` long option) that tells the `thread select` command to interpret the `<thread-index>` argument as a thread ID. Here's an example of it working: ``` michristensen@devbig356 llvm/llvm-project (thread-select-tid) » ../Debug/bin/lldb ~/scratch/cpp/threading/a.out (lldb) target create "/home/michristensen/scratch/cpp/threading/a.out" Current executable set to '/home/michristensen/scratch/cpp/threading/a.out' (x86_64). (lldb) b 18 Breakpoint 1: where = a.out`main + 80 at main.cpp:18:12, address = 0x0000000000000850 (lldb) run Process 215715 launched: '/home/michristensen/scratch/cpp/threading/a.out' (x86_64) This is a thread, i=1 This is a thread, i=2 This is a thread, i=3 This is a thread, i=4 This is a thread, i=5 Process 215715 stopped * thread #1, name = 'a.out', stop reason = breakpoint 1.1 frame #0: 0x0000555555400850 a.out`main at main.cpp:18:12 15 for (int i = 0; i < 5; i++) { 16 pthread_create(&thread_ids[i], NULL, foo, NULL); 17 } -> 18 for (int i = 0; i < 5; i++) { 19 pthread_join(thread_ids[i], NULL); 20 } 21 return 0; (lldb) thread select 2 * thread #2, name = 'a.out' frame #0: 0x00007ffff68f9918 libc.so.6`__nanosleep + 72 libc.so.6`__nanosleep: -> 0x7ffff68f9918 <+72>: cmpq $-0x1000, %rax ; imm = 0xF000 0x7ffff68f991e <+78>: ja 0x7ffff68f9952 ; <+130> 0x7ffff68f9920 <+80>: movl %edx, %edi 0x7ffff68f9922 <+82>: movl %eax, 0xc(%rsp) (lldb) thread info thread #2: tid = 216047, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' (lldb) thread list Process 215715 stopped thread #1: tid = 215715, 0x0000555555400850 a.out`main at main.cpp:18:12, name = 'a.out', stop reason = breakpoint 1.1 * thread #2: tid = 216047, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' thread #3: tid = 216048, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' thread #4: tid = 216049, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' thread #5: tid = 216050, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' thread #6: tid = 216051, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' (lldb) thread select 215715 error: invalid thread #215715. (lldb) thread select -t 215715 * thread #1, name = 'a.out', stop reason = breakpoint 1.1 frame #0: 0x0000555555400850 a.out`main at main.cpp:18:12 15 for (int i = 0; i < 5; i++) { 16 pthread_create(&thread_ids[i], NULL, foo, NULL); 17 } -> 18 for (int i = 0; i < 5; i++) { 19 pthread_join(thread_ids[i], NULL); 20 } 21 return 0; (lldb) thread select -t 216051 * thread #6, name = 'a.out' frame #0: 0x00007ffff68f9918 libc.so.6`__nanosleep + 72 libc.so.6`__nanosleep: -> 0x7ffff68f9918 <+72>: cmpq $-0x1000, %rax ; imm = 0xF000 0x7ffff68f991e <+78>: ja 0x7ffff68f9952 ; <+130> 0x7ffff68f9920 <+80>: movl %edx, %edi 0x7ffff68f9922 <+82>: movl %eax, 0xc(%rsp) (lldb) thread select 3 * thread #3, name = 'a.out' frame #0: 0x00007ffff68f9918 libc.so.6`__nanosleep + 72 libc.so.6`__nanosleep: -> 0x7ffff68f9918 <+72>: cmpq $-0x1000, %rax ; imm = 0xF000 0x7ffff68f991e <+78>: ja 0x7ffff68f9952 ; <+130> 0x7ffff68f9920 <+80>: movl %edx, %edi 0x7ffff68f9922 <+82>: movl %eax, 0xc(%rsp) (lldb) thread select -t 216048 * thread #3, name = 'a.out' frame #0: 0x00007ffff68f9918 libc.so.6`__nanosleep + 72 libc.so.6`__nanosleep: -> 0x7ffff68f9918 <+72>: cmpq $-0x1000, %rax ; imm = 0xF000 0x7ffff68f991e <+78>: ja 0x7ffff68f9952 ; <+130> 0x7ffff68f9920 <+80>: movl %edx, %edi 0x7ffff68f9922 <+82>: movl %eax, 0xc(%rsp) (lldb) thread select --thread_id 216048 * thread #3, name = 'a.out' frame #0: 0x00007ffff68f9918 libc.so.6`__nanosleep + 72 libc.so.6`__nanosleep: -> 0x7ffff68f9918 <+72>: cmpq $-0x1000, %rax ; imm = 0xF000 0x7ffff68f991e <+78>: ja 0x7ffff68f9952 ; <+130> 0x7ffff68f9920 <+80>: movl %edx, %edi 0x7ffff68f9922 <+82>: movl %eax, 0xc(%rsp) (lldb) help thread select Change the currently selected thread. Syntax: thread select <cmd-options> <thread-index> Command Options Usage: thread select [-t] <thread-index> -t ( --thread_id ) Provide a thread ID instead of a thread index. This command takes options and free-form arguments. If your arguments resemble option specifiers (i.e., they start with a - or --), you must use ' -- ' between the end of the command options and the beginning of the arguments. (lldb) c Process 215715 resuming Process 215715 exited with status = 0 (0x00000000) ```

This has been flaky for a while, for example https://lab.llvm.org/buildbot/#/builders/96/builds/50350 ``` Command Output (stdout): -- lldb version 18.0.0git (https://github.com/llvm/llvm-project.git revision 3974d89) clang revision 3974d89 llvm revision 3974d89 "can't evaluate expressions when the process is running." ``` ``` PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace. #0 0x0000ffffa46191a0 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x529a1a0) #1 0x0000ffffa4617144 llvm::sys::RunSignalHandlers() (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x5298144) #2 0x0000ffffa46198d0 SignalHandler(int) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x529a8d0) #3 0x0000ffffab25b7dc (linux-vdso.so.1+0x7dc) #4 0x0000ffffab13d050 /build/glibc-Q8DG8B/glibc-2.31/string/../sysdeps/aarch64/multiarch/memcpy_advsimd.S:92:0 #5 0x0000ffffa446f420 lldb_private::process_gdb_remote::GDBRemoteRegisterContext::PrivateSetRegisterValue(unsigned int, llvm::ArrayRef<unsigned char>) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x50f0420) #6 0x0000ffffa446f7b8 lldb_private::process_gdb_remote::GDBRemoteRegisterContext::GetPrimordialRegister(lldb_private::RegisterInfo const*, lldb_private::process_gdb_remote::GDBRemoteCommunicationClient&) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x50f07b8) #7 0x0000ffffa446f308 lldb_private::process_gdb_remote::GDBRemoteRegisterContext::ReadRegisterBytes(lldb_private::RegisterInfo const*) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x50f0308) #8 0x0000ffffa446ec1c lldb_private::process_gdb_remote::GDBRemoteRegisterContext::ReadRegister(lldb_private::RegisterInfo const*, lldb_private::RegisterValue&) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x50efc1c) #9 0x0000ffffa412eaa4 lldb_private::RegisterContext::ReadRegisterAsUnsigned(lldb_private::RegisterInfo const*, unsigned long) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x4dafaa4) #10 0x0000ffffa420861c ReadLinuxProcessAddressMask(std::shared_ptr<lldb_private::Process>, llvm::StringRef) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x4e8961c) #11 0x0000ffffa4208430 ABISysV_arm64::FixCodeAddress(unsigned long) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x4e89430) ``` Judging by the backtrace something is trying to read the pointer authentication address/code mask registers. This explains why I've not seen this issue locally, as the buildbot runs on Graviton 3 with has the pointer authentication extension. I will try to reproduce, fix and re-enable the test.

…5394) Calling one of pthread join/detach interceptor on an already joined/detached thread causes asserts such as: AddressSanitizer: CHECK failed: sanitizer_thread_arg_retval.cpp:56 "((t)) != (0)" (0x0, 0x0) (tid=1236094) #0 0x555555634f8b in __asan::CheckUnwind() compiler-rt/lib/asan/asan_rtl.cpp:69:3 #1 0x55555564e06e in __sanitizer::CheckFailed(char const*, int, char const*, unsigned long long, unsigned long long) compiler-rt/lib/sanitizer_common/sanitizer_termination.cpp:86:24 #2 0x5555556491df in __sanitizer::ThreadArgRetval::BeforeJoin(unsigned long) const compiler-rt/lib/sanitizer_common/sanitizer_thread_arg_retval.cpp:56:3 #3 0x5555556198ed in Join<___interceptor_pthread_tryjoin_np(void*, void**)::<lambda()> > compiler-rt/lib/asan/../sanitizer_common/sanitizer_thread_arg_retval.h:74:26 #4 0x5555556198ed in pthread_tryjoin_np compiler-rt/lib/asan/asan_interceptors.cpp:311:29 The assert are replaced by error codes.

The concurrent tests all do a pthread_join at the end, and concurrent_base.py stops after that pthread_join and sanity checks that only 1 thread is running. On macOS, after pthread_join() has completed, there can be an extra thread still running which is completing the details of that task asynchronously; this causes testsuite failures. When this happens, we see the second thread is in ``` frame #0: 0x0000000180ce7700 libsystem_kernel.dylib`__ulock_wake + 8 frame #1: 0x0000000180d25ad4 libsystem_pthread.dylib`_pthread_joiner_wake + 52 frame #2: 0x0000000180d23c18 libsystem_pthread.dylib`_pthread_terminate + 384 frame #3: 0x0000000180d23a98 libsystem_pthread.dylib`_pthread_terminate_invoke + 92 frame #4: 0x0000000180d26740 libsystem_pthread.dylib`_pthread_exit + 112 frame #5: 0x0000000180d26040 libsystem_pthread.dylib`_pthread_start + 148 ``` there are none of the functions from the test file present on this thread. In this patch, instead of counting the number of threads, I iterate over the threads looking for functions from our test file (by name) and only count threads that have at least one of them. It's a lower frequency failure than the darwin kernel bug causing an extra step instruction mach exception when hardware breakpoint/watchpoints are used, but once I fixed that, this came up as the next most common failure for these tests. rdar://110555062

@0

…(#80904)" This reverts commit b1ac052. This commit breaks coroutine splitting for non-swift calling convention functions. In this example: ```ll ; ModuleID = 'repro.ll' source_filename = "stdlib/test/runtime/test_llcl.mojo" target datalayout = "e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-i128:128-f80:128-n8:16:32:64-S128" target triple = "x86_64-unknown-linux-gnu" @0 = internal constant { i32, i32 } { i32 trunc (i64 sub (i64 ptrtoint (ptr @craSH to i64), i64 ptrtoint (ptr getelementptr inbounds ({ i32, i32 }, ptr @0, i32 0, i32 1) to i64)) to i32), i32 64 } define dso_local void @af_suspend_fn(ptr %0, i64 %1, ptr %2) #0 { ret void } define dso_local void @craSH(ptr %0) #0 { %2 = call token @llvm.coro.id.async(i32 64, i32 8, i32 0, ptr @0) %3 = call ptr @llvm.coro.begin(token %2, ptr null) %4 = getelementptr inbounds { ptr, { ptr, ptr }, i64, { ptr, i1 }, i64, i64 }, ptr poison, i32 0, i32 0 %5 = call ptr @llvm.coro.async.resume() store ptr %5, ptr %4, align 8 %6 = call { ptr, ptr, ptr } (i32, ptr, ptr, ...) @llvm.coro.suspend.async.sl_p0p0p0s(i32 0, ptr %5, ptr @ctxt_proj_fn, ptr @af_suspend_fn, ptr poison, i64 -1, ptr poison) ret void } define dso_local ptr @ctxt_proj_fn(ptr %0) #0 { ret ptr %0 } ; Function Attrs: nomerge nounwind declare { ptr, ptr, ptr } @llvm.coro.suspend.async.sl_p0p0p0s(i32, ptr, ptr, ...) #1 ; Function Attrs: nounwind declare token @llvm.coro.id.async(i32, i32, i32, ptr) #2 ; Function Attrs: nounwind declare ptr @llvm.coro.begin(token, ptr writeonly) #2 ; Function Attrs: nomerge nounwind declare ptr @llvm.coro.async.resume() #1 attributes #0 = { "target-features"="+adx,+aes,+avx,+avx2,+bmi,+bmi2,+clflushopt,+clwb,+clzero,+crc32,+cx16,+cx8,+f16c,+fma,+fsgsbase,+fxsr,+invpcid,+lzcnt,+mmx,+movbe,+mwaitx,+pclmul,+pku,+popcnt,+prfchw,+rdpid,+rdpru,+rdrnd,+rdseed,+sahf,+sha,+sse,+sse2,+sse3,+sse4.1,+sse4.2,+sse4a,+ssse3,+vaes,+vpclmulqdq,+wbnoinvd,+x87,+xsave,+xsavec,+xsaveopt,+xsaves" } attributes #1 = { nomerge nounwind } attributes #2 = { nounwind } ``` This verifier crashes after the `coro-split` pass with ``` cannot guarantee tail call due to mismatched parameter counts musttail call void @af_suspend_fn(ptr poison, i64 -1, ptr poison) LLVM ERROR: Broken function PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace. Stack dump: 0. Program arguments: opt ../../../reduced.ll -O0 #0 0x00007f1d89645c0e __interceptor_backtrace.part.0 /build/gcc-11-XeT9lY/gcc-11-11.4.0/build/x86_64-linux-gnu/libsanitizer/asan/../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:4193:28 #1 0x0000556d94d254f7 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Support/Unix/Signals.inc:723:22 #2 0x0000556d94d19a2f llvm::sys::RunSignalHandlers() /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Support/Signals.cpp:105:20 #3 0x0000556d94d1aa42 SignalHandler(int) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Support/Unix/Signals.inc:371:36 #4 0x00007f1d88e42520 (/lib/x86_64-linux-gnu/libc.so.6+0x42520) #5 0x00007f1d88e969fc __pthread_kill_implementation ./nptl/pthread_kill.c:44:76 #6 0x00007f1d88e969fc __pthread_kill_internal ./nptl/pthread_kill.c:78:10 #7 0x00007f1d88e969fc pthread_kill ./nptl/pthread_kill.c:89:10 #8 0x00007f1d88e42476 gsignal ./signal/../sysdeps/posix/raise.c:27:6 #9 0x00007f1d88e287f3 abort ./stdlib/abort.c:81:7 #10 0x0000556d8944be01 std::vector<llvm::json::Value, std::allocator<llvm::json::Value>>::size() const /usr/include/c++/11/bits/stl_vector.h:919:40 #11 0x0000556d8944be01 bool std::operator==<llvm::json::Value, std::allocator<llvm::json::Value>>(std::vector<llvm::json::Value, std::allocator<llvm::json::Value>> const&, std::vector<llvm::json::Value, std::allocator<llvm::json::Value>> const&) /usr/include/c++/11/bits/stl_vector.h:1893:23 #12 0x0000556d8944be01 llvm::json::operator==(llvm::json::Array const&, llvm::json::Array const&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/Support/JSON.h:572:69 #13 0x0000556d8944be01 llvm::json::operator==(llvm::json::Value const&, llvm::json::Value const&) (.cold) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Support/JSON.cpp:204:28 #14 0x0000556d949ed2bd llvm::report_fatal_error(char const*, bool) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Support/ErrorHandling.cpp:82:70 #15 0x0000556d8e37e876 llvm::SmallVectorBase<unsigned int>::size() const /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallVector.h:91:32 #16 0x0000556d8e37e876 llvm::SmallVectorTemplateCommon<llvm::DiagnosticInfoOptimizationBase::Argument, void>::end() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallVector.h:282:41 #17 0x0000556d8e37e876 llvm::SmallVector<llvm::DiagnosticInfoOptimizationBase::Argument, 4u>::~SmallVector() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallVector.h:1215:24 #18 0x0000556d8e37e876 llvm::DiagnosticInfoOptimizationBase::~DiagnosticInfoOptimizationBase() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/DiagnosticInfo.h:413:7 #19 0x0000556d8e37e876 llvm::DiagnosticInfoIROptimization::~DiagnosticInfoIROptimization() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/DiagnosticInfo.h:622:7 #20 0x0000556d8e37e876 llvm::OptimizationRemark::~OptimizationRemark() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/DiagnosticInfo.h:689:7 #21 0x0000556d8e37e876 operator() /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Transforms/Coroutines/CoroSplit.cpp:2213:14 #22 0x0000556d8e37e876 emit<llvm::CoroSplitPass::run(llvm::LazyCallGraph::SCC&, llvm::CGSCCAnalysisManager&, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&)::<lambda()> > /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/Analysis/OptimizationRemarkEmitter.h:83:12 #23 0x0000556d8e37e876 llvm::CoroSplitPass::run(llvm::LazyCallGraph::SCC&, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>&, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Transforms/Coroutines/CoroSplit.cpp:2212:13 #24 0x0000556d8c36ecb1 llvm::detail::PassModel<llvm::LazyCallGraph::SCC, llvm::CoroSplitPass, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&>::run(llvm::LazyCallGraph::SCC&, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>&, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManagerInternal.h:91:3 #25 0x0000556d91c1a84f llvm::PassManager<llvm::LazyCallGraph::SCC, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&>::run(llvm::LazyCallGraph::SCC&, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>&, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Analysis/CGSCCPassManager.cpp:90:12 #26 0x0000556d8c3690d1 llvm::detail::PassModel<llvm::LazyCallGraph::SCC, llvm::PassManager<llvm::LazyCallGraph::SCC, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&>, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&>::run(llvm::LazyCallGraph::SCC&, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>&, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManagerInternal.h:91:3 #27 0x0000556d91c2162d llvm::ModuleToPostOrderCGSCCPassAdaptor::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Analysis/CGSCCPassManager.cpp:278:18 #28 0x0000556d8c369035 llvm::detail::PassModel<llvm::Module, llvm::ModuleToPostOrderCGSCCPassAdaptor, llvm::AnalysisManager<llvm::Module>>::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManagerInternal.h:91:3 #29 0x0000556d9457abc5 llvm::PassManager<llvm::Module, llvm::AnalysisManager<llvm::Module>>::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManager.h:247:20 #30 0x0000556d8e30979e llvm::CoroConditionalWrapper::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Transforms/Coroutines/CoroConditionalWrapper.cpp:19:74 #31 0x0000556d8c365755 llvm::detail::PassModel<llvm::Module, llvm::CoroConditionalWrapper, llvm::AnalysisManager<llvm::Module>>::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManagerInternal.h:91:3 #32 0x0000556d9457abc5 llvm::PassManager<llvm::Module, llvm::AnalysisManager<llvm::Module>>::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManager.h:247:20 #33 0x0000556d89818556 llvm::SmallPtrSetImplBase::isSmall() const /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallPtrSet.h:196:33 #34 0x0000556d89818556 llvm::SmallPtrSetImplBase::~SmallPtrSetImplBase() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallPtrSet.h:84:17 #35 0x0000556d89818556 llvm::SmallPtrSetImpl<llvm::AnalysisKey*>::~SmallPtrSetImpl() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallPtrSet.h:321:7 #36 0x0000556d89818556 llvm::SmallPtrSet<llvm::AnalysisKey*, 2u>::~SmallPtrSet() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallPtrSet.h:427:7 #37 0x0000556d89818556 llvm::PreservedAnalyses::~PreservedAnalyses() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/Analysis.h:109:7 #38 0x0000556d89818556 llvm::runPassPipeline(llvm::StringRef, llvm::Module&, llvm::TargetMachine*, llvm::TargetLibraryInfoImpl*, llvm::ToolOutputFile*, llvm::ToolOutputFile*, llvm::ToolOutputFile*, llvm::StringRef, llvm::ArrayRef<llvm::PassPlugin>, llvm::ArrayRef<std::function<void (llvm::PassBuilder&)>>, llvm::opt_tool::OutputKind, llvm::opt_tool::VerifierKind, bool, bool, bool, bool, bool, bool, bool) /home/ubuntu/modular/third-party/llvm-project/llvm/tools/opt/NewPMDriver.cpp:532:10 #39 0x0000556d897e3939 optMain /home/ubuntu/modular/third-party/llvm-project/llvm/tools/opt/optdriver.cpp:737:27 #40 0x0000556d89455461 main /home/ubuntu/modular/third-party/llvm-project/llvm/tools/opt/opt.cpp:25:33 #41 0x00007f1d88e29d90 __libc_start_call_main ./csu/../sysdeps/nptl/libc_start_call_main.h:58:16 #42 0x00007f1d88e29e40 call_init ./csu/../csu/libc-start.c:128:20 #43 0x00007f1d88e29e40 __libc_start_main ./csu/../csu/libc-start.c:379:5 #44 0x0000556d897b6335 _start (/home/ubuntu/modular/.derived/third-party/llvm-project/build-relwithdebinfo-asan/bin/opt+0x150c335) Aborted (core dumped)

TestCases/Misc/Linux/sigaction.cpp fails because dlsym() may call malloc on failure. And then the wrapped malloc appears to access thread local storage using global dynamic accesses, thus calling ___interceptor___tls_get_addr, before REAL(__tls_get_addr) has been set, so we get a crash inside ___interceptor___tls_get_addr. For example, this can happen when looking up __isoc23_scanf which might not exist in some libcs. Fix this by marking the thread local variable accessed inside the debug checks as "initial-exec", which does not require __tls_get_addr. This is probably a better alternative to llvm/llvm-project#83886. This fixes a different crash but is related to llvm/llvm-project#46204. Backtrace: ``` #0 0x0000000000000000 in ?? () #1 0x00007ffff6a9d89e in ___interceptor___tls_get_addr (arg=0x7ffff6b27be8) at /path/to/llvm/compiler-rt/lib/tsan/rtl/tsan_interceptors_posix.cpp:2759 #2 0x00007ffff6a46bc6 in __sanitizer::CheckedMutex::LockImpl (this=0x7ffff6b27be8, pc=140737331846066) at /path/to/llvm/compiler-rt/lib/sanitizer_common/sanitizer_mutex.cpp:218 #3 0x00007ffff6a448b2 in __sanitizer::CheckedMutex::Lock (this=0x7ffff6b27be8, this@entry=0x730000000580) at /path/to/llvm/compiler-rt/lib/tsan/rtl/../../sanitizer_common/sanitizer_mutex.h:129 #4 __sanitizer::Mutex::Lock (this=0x7ffff6b27be8, this@entry=0x730000000580) at /path/to/llvm/compiler-rt/lib/tsan/rtl/../../sanitizer_common/sanitizer_mutex.h:167 #5 0x00007ffff6abdbb2 in __sanitizer::GenericScopedLock<__sanitizer::Mutex>::GenericScopedLock (mu=0x730000000580, this=<optimized out>) at /path/to/llvm/compiler-rt/lib/tsan/rtl/../../sanitizer_common/sanitizer_mutex.h:383 #6 __sanitizer::SizeClassAllocator64<__tsan::AP64>::GetFromAllocator (this=0x7ffff7487dc0 <__tsan::allocator_placeholder>, stat=stat@entry=0x7ffff570db68, class_id=11, chunks=chunks@entry=0x7ffff5702cc8, n_chunks=n_chunks@entry=128) at /path/to/llvm/compiler-rt/lib/tsan/rtl/../../sanitizer_common/sanitizer_allocator_primary64.h:207 #7 0x00007ffff6abdaa0 in __sanitizer::SizeClassAllocator64LocalCache<__sanitizer::SizeClassAllocator64<__tsan::AP64> >::Refill (this=<optimized out>, c=c@entry=0x7ffff5702cb8, allocator=<optimized out>, class_id=<optimized out>) at /path/to/llvm/compiler-rt/lib/tsan/rtl/../../sanitizer_common/sanitizer_allocator_local_cache.h:103 #8 0x00007ffff6abd731 in __sanitizer::SizeClassAllocator64LocalCache<__sanitizer::SizeClassAllocator64<__tsan::AP64> >::Allocate (this=0x7ffff6b27be8, allocator=0x7ffff5702cc8, class_id=140737311157448) at /path/to/llvm/compiler-rt/lib/tsan/rtl/../../sanitizer_common/sanitizer_allocator_local_cache.h:39 #9 0x00007ffff6abc397 in __sanitizer::CombinedAllocator<__sanitizer::SizeClassAllocator64<__tsan::AP64>, __sanitizer::LargeMmapAllocatorPtrArrayDynamic>::Allocate (this=0x7ffff5702cc8, cache=0x7ffff6b27be8, size=<optimized out>, size@entry=175, alignment=alignment@entry=16) at /path/to/llvm/compiler-rt/lib/tsan/rtl/../../sanitizer_common/sanitizer_allocator_combined.h:69 #10 0x00007ffff6abaa6a in __tsan::user_alloc_internal (thr=0x7ffff7ebd980, pc=140737331499943, sz=sz@entry=175, align=align@entry=16, signal=true) at /path/to/llvm/compiler-rt/lib/tsan/rtl/tsan_mman.cpp:198 #11 0x00007ffff6abb0d1 in __tsan::user_alloc (thr=0x7ffff6b27be8, pc=140737331846066, sz=11, sz@entry=175) at /path/to/llvm/compiler-rt/lib/tsan/rtl/tsan_mman.cpp:223 #12 0x00007ffff6a693b5 in ___interceptor_malloc (size=175) at /path/to/llvm/compiler-rt/lib/tsan/rtl/tsan_interceptors_posix.cpp:666 #13 0x00007ffff7fce7f2 in malloc (size=175) at ../include/rtld-malloc.h:56 #14 __GI__dl_exception_create_format (exception=exception@entry=0x7fffffffd0d0, objname=0x7ffff7fc3550 "/path/to/llvm/compiler-rt/cmake-build-all-sanitizers/lib/linux/libclang_rt.tsan-x86_64.so", fmt=fmt@entry=0x7ffff7ff2db9 "undefined symbol: %s%s%s") at ./elf/dl-exception.c:157 #15 0x00007ffff7fd50e8 in _dl_lookup_symbol_x (undef_name=0x7ffff6af868b "__isoc23_scanf", undef_map=<optimized out>, ref=0x7fffffffd148, symbol_scope=<optimized out>, version=<optimized out>, type_class=0, flags=2, skip_map=0x7ffff7fc35e0) at ./elf/dl-lookup.c:793 --Type <RET> for more, q to quit, c to continue without paging-- #16 0x00007ffff656d6ed in do_sym (handle=<optimized out>, name=0x7ffff6af868b "__isoc23_scanf", who=0x7ffff6a3bb84 <__interception::InterceptFunction(char const*, unsigned long*, unsigned long, unsigned long)+36>, vers=vers@entry=0x0, flags=flags@entry=2) at ./elf/dl-sym.c:146 #17 0x00007ffff656d9dd in _dl_sym (handle=<optimized out>, name=<optimized out>, who=<optimized out>) at ./elf/dl-sym.c:195 #18 0x00007ffff64a2854 in dlsym_doit (a=a@entry=0x7fffffffd3b0) at ./dlfcn/dlsym.c:40 #19 0x00007ffff7fcc489 in __GI__dl_catch_exception (exception=exception@entry=0x7fffffffd310, operate=0x7ffff64a2840 <dlsym_doit>, args=0x7fffffffd3b0) at ./elf/dl-catch.c:237 #20 0x00007ffff7fcc5af in _dl_catch_error (objname=0x7fffffffd368, errstring=0x7fffffffd370, mallocedp=0x7fffffffd367, operate=<optimized out>, args=<optimized out>) at ./elf/dl-catch.c:256 #21 0x00007ffff64a2257 in _dlerror_run (operate=operate@entry=0x7ffff64a2840 <dlsym_doit>, args=args@entry=0x7fffffffd3b0) at ./dlfcn/dlerror.c:138 #22 0x00007ffff64a28e5 in dlsym_implementation (dl_caller=<optimized out>, name=<optimized out>, handle=<optimized out>) at ./dlfcn/dlsym.c:54 #23 ___dlsym (handle=<optimized out>, name=<optimized out>) at ./dlfcn/dlsym.c:68 #24 0x00007ffff6a3bb84 in __interception::GetFuncAddr (name=0x7ffff6af868b "__isoc23_scanf", trampoline=140737311157448) at /path/to/llvm/compiler-rt/lib/interception/interception_linux.cpp:42 #25 __interception::InterceptFunction (name=0x7ffff6af868b "__isoc23_scanf", ptr_to_real=0x7ffff74850e8 <__interception::real___isoc23_scanf>, func=11, trampoline=140737311157448) at /path/to/llvm/compiler-rt/lib/interception/interception_linux.cpp:61 #26 0x00007ffff6a9f2d9 in InitializeCommonInterceptors () at /path/to/llvm/compiler-rt/lib/tsan/rtl/../../sanitizer_common/sanitizer_common_interceptors.inc:10315 ``` Reviewed By: vitalybuka, MaskRay Pull Request: llvm/llvm-project#83890

Consider the following: ldr r0, [r4] ldr r7, [r0, #4] cmp r7, r3 bhi .LBB0_6 cmp r0, r2 push {r0} pop {r4} bne .LBB0_3 movs r0, r6 pop {r4, r5, r6, r7} pop {r1} bx r1 Here is a snippet of the generated THUMB1 code of the K&R malloc function that clang currently compiles to. push {r0} ends up being popped to pop {r4}. movs r4, r0 would destroy the flags set by cmp right above. The compiler has no alternative in this case, except one: the only alternative is to transfer through a high register. However, it seems like LLVM does not consider that this is a valid approach, even though it is a free clobbering a high register. This patch addresses the FIXME so the compiler can do that when it can in r10 or r11, or r12.

…ined member functions & member function templates (#88963) Consider the following snippet from the discussion of CWG2847 on the core reflector: ``` template<typename T> concept C = sizeof(T) <= sizeof(long); template<typename T> struct A { template<typename U> void f(U) requires C<U>; // #1, declares a function template void g() requires C<T>; // #2, declares a function template<> void f(char); // #3, an explicit specialization of a function template that declares a function }; template<> template<typename U> void A<short>::f(U) requires C<U>; // #4, an explicit specialization of a function template that declares a function template template<> template<> void A<int>::f(int); // #5, an explicit specialization of a function template that declares a function template<> void A<long>::g(); // #6, an explicit specialization of a function that declares a function ``` A number of problems exist: - Clang rejects `#4` because the trailing _requires-clause_ has `U` substituted with the wrong template parameter depth when `Sema::AreConstraintExpressionsEqual` is called to determine whether it matches the trailing _requires-clause_ of the implicitly instantiated function template. - Clang rejects `#5` because the function template specialization instantiated from `A<int>::f` has a trailing _requires-clause_, but `#5` does not (nor can it have one as it isn't a templated function). - Clang rejects `#6` for the same reasons it rejects `#5`. This patch resolves these issues by making the following changes: - To fix `#4`, `Sema::AreConstraintExpressionsEqual` is passed `FunctionTemplateDecl`s when comparing the trailing _requires-clauses_ of `#4` and the function template instantiated from `#1`. - To fix `#5` and `#6`, the trailing _requires-clauses_ are not compared for explicit specializations that declare functions. In addition to these changes, `CheckMemberSpecialization` now considers constraint satisfaction/constraint partial ordering when determining which member function is specialized by an explicit specialization of a member function for an implicit instantiation of a class template (we previously would select the first function that has the same type as the explicit specialization). With constraints taken under consideration, we match EDG's behavior for these declarations.

...which caused issues like > ==42==ERROR: AddressSanitizer failed to deallocate 0x32 (50) bytes at address 0x117e0000 (error code: 28) > ==42==Cannot dump memory map on emscriptenAddressSanitizer: CHECK failed: sanitizer_common.cpp:81 "((0 && "unable to unmmap")) != (0)" (0x0, 0x0) (tid=288045824) > #0 0x14f73b0c in __asan::CheckUnwind()+0x14f73b0c (this.program+0x14f73b0c) > #1 0x14f8a3c2 in __sanitizer::CheckFailed(char const*, int, char const*, unsigned long long, unsigned long long)+0x14f8a3c2 (this.program+0x14f8a3c2) > #2 0x14f7d6e1 in __sanitizer::ReportMunmapFailureAndDie(void*, unsigned long, int, bool)+0x14f7d6e1 (this.program+0x14f7d6e1) > #3 0x14f81fbd in __sanitizer::UnmapOrDie(void*, unsigned long)+0x14f81fbd (this.program+0x14f81fbd) > #4 0x14f875df in __sanitizer::SuppressionContext::ParseFromFile(char const*)+0x14f875df (this.program+0x14f875df) > #5 0x14f74eab in __asan::InitializeSuppressions()+0x14f74eab (this.program+0x14f74eab) > #6 0x14f73a1a in __asan::AsanInitInternal()+0x14f73a1a (this.program+0x14f73a1a) when trying to use an ASan suppressions file under Emscripten: Even though it would be considered OK by SUSv4, the Emscripten runtime states "We don't support partial munmapping" (see <emscripten-core/emscripten@f4115eb> "Implement MAP_ANONYMOUS on top of malloc in STANDALONE_WASM mode (#16289)"). Co-authored-by: Stephan Bergmann <[email protected]>

…erSize (#67657)" This reverts commit f0b3654. This commit triggers UB by reading an uninitialized variable. `UP.PartialThreshold` is used uninitialized in `getUnrollingPreferences()` when it is called from `LoopVectorizationPlanner::executePlan()`. In this case the `UP` variable is created on the stack and its fields are not initialized. ``` ==8802==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x557c0b081b99 in llvm::BasicTTIImplBase<llvm::X86TTIImpl>::getUnrollingPreferences(llvm::Loop*, llvm::ScalarEvolution&, llvm::TargetTransformInfo::UnrollingPreferences&, llvm::OptimizationRemarkEmitter*) llvm-project/llvm/include/llvm/CodeGen/BasicTTIImpl.h #1 0x557c0b07a40c in llvm::TargetTransformInfo::Model<llvm::X86TTIImpl>::getUnrollingPreferences(llvm::Loop*, llvm::ScalarEvolution&, llvm::TargetTransformInfo::UnrollingPreferences&, llvm::OptimizationRemarkEmitter*) llvm-project/llvm/include/llvm/Analysis/TargetTransformInfo.h:2277:17 #2 0x557c0f5d69ee in llvm::TargetTransformInfo::getUnrollingPreferences(llvm::Loop*, llvm::ScalarEvolution&, llvm::TargetTransformInfo::UnrollingPreferences&, llvm::OptimizationRemarkEmitter*) const llvm-project/llvm/lib/Analysis/TargetTransformInfo.cpp:387:19 #3 0x557c0e6b96a0 in llvm::LoopVectorizationPlanner::executePlan(llvm::ElementCount, unsigned int, llvm::VPlan&, llvm::InnerLoopVectorizer&, llvm::DominatorTree*, bool, llvm::DenseMap<llvm::SCEV const*, llvm::Value*, llvm::DenseMapInfo<llvm::SCEV const*, void>, llvm::detail::DenseMapPair<llvm::SCEV const*, llvm::Value*>> const*) llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:7624:7 #4 0x557c0e6e4b63 in llvm::LoopVectorizePass::processLoop(llvm::Loop*) llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:10253:13 #5 0x557c0e6f2429 in llvm::LoopVectorizePass::runImpl(llvm::Function&, llvm::ScalarEvolution&, llvm::LoopInfo&, llvm::TargetTransformInfo&, llvm::DominatorTree&, llvm::BlockFrequencyInfo*, llvm::TargetLibraryInfo*, llvm::DemandedBits&, llvm::AssumptionCache&, llvm::LoopAccessInfoManager&, llvm::OptimizationRemarkEmitter&, llvm::ProfileSummaryInfo*) llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:10344:30 #6 0x557c0e6f2f97 in llvm::LoopVectorizePass::run(llvm::Function&, llvm::AnalysisManager<llvm::Function>&) llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:10383:9 [...] Uninitialized value was created by an allocation of 'UP' in the stack frame #0 0x557c0e6b961e in llvm::LoopVectorizationPlanner::executePlan(llvm::ElementCount, unsigned int, llvm::VPlan&, llvm::InnerLoopVectorizer&, llvm::DominatorTree*, bool, llvm::DenseMap<llvm::SCEV const*, llvm::Value*, llvm::DenseMapInfo<llvm::SCEV const*, void>, llvm::detail::DenseMapPair<llvm::SCEV const*, llvm::Value*>> const*) llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:7623:3 ```

Add cluster_group aspect to .td defs.

…arallel fusion #94391 (#97607)" This reverts commit edbc0e3. Reason for rollback. ASAN complains about this PR: ==4320==ERROR: AddressSanitizer: heap-use-after-free on address 0x502000006cd8 at pc 0x55e2978d63cf bp 0x7ffe6431c2b0 sp 0x7ffe6431c2a8 READ of size 8 at 0x502000006cd8 thread T0 #0 0x55e2978d63ce in map<llvm::MutableArrayRef<mlir::BlockArgument> &, llvm::MutableArrayRef<mlir::BlockArgument>, nullptr> mlir/include/mlir/IR/IRMapping.h:40:11 #1 0x55e2978d63ce in mlir::createFused(mlir::LoopLikeOpInterface, mlir::LoopLikeOpInterface, mlir::RewriterBase&, std::__u::function<llvm::SmallVector<mlir::Value, 6u> (mlir::OpBuilder&, mlir::Location, llvm::ArrayRef<mlir::BlockArgument>)>, llvm::function_ref<void (mlir::RewriterBase&, mlir::LoopLikeOpInterface, mlir::LoopLikeOpInterface&, mlir::IRMapping)>) mlir/lib/Interfaces/LoopLikeInterface.cpp:156:11 #2 0x55e2952a614b in mlir::fuseIndependentSiblingForLoops(mlir::scf::ForOp, mlir::scf::ForOp, mlir::RewriterBase&) mlir/lib/Dialect/SCF/Utils/Utils.cpp:1398:43 #3 0x55e291480c6f in mlir::transform::LoopFuseSiblingOp::apply(mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) mlir/lib/Dialect/SCF/TransformOps/SCFTransformOps.cpp:482:17 #4 0x55e29149ed5e in mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Model<mlir::transform::LoopFuseSiblingOp>::apply(mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Concept const*, mlir::Operation*, mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.h.inc:477:56 #5 0x55e297494a60 in apply blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.cpp.inc:61:14 #6 0x55e297494a60 in mlir::transform::TransformState::applyTransform(mlir::transform::TransformOpInterface) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:953:48 #7 0x55e294646a8d in applySequenceBlock(mlir::Block&, mlir::transform::FailurePropagationMode, mlir::transform::TransformState&, mlir::transform::TransformResults&) mlir/lib/Dialect/Transform/IR/TransformOps.cpp:1788:15 #8 0x55e29464f927 in mlir::transform::NamedSequenceOp::apply(mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) mlir/lib/Dialect/Transform/IR/TransformOps.cpp:2155:10 #9 0x55e2945d28ee in mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Model<mlir::transform::NamedSequenceOp>::apply(mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Concept const*, mlir::Operation*, mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.h.inc:477:56 #10 0x55e297494a60 in apply blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.cpp.inc:61:14 #11 0x55e297494a60 in mlir::transform::TransformState::applyTransform(mlir::transform::TransformOpInterface) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:953:48 #12 0x55e2974a5fe2 in mlir::transform::applyTransforms(mlir::Operation*, mlir::transform::TransformOpInterface, mlir::RaggedArray<llvm::PointerUnion<mlir::Operation*, mlir::Attribute, mlir::Value>> const&, mlir::transform::TransformOptions const&, bool) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:2016:16 #13 0x55e2945888d7 in mlir::transform::applyTransformNamedSequence(mlir::RaggedArray<llvm::PointerUnion<mlir::Operation*, mlir::Attribute, mlir::Value>>, mlir::transform::TransformOpInterface, mlir::ModuleOp, mlir::transform::TransformOptions const&) mlir/lib/Dialect/Transform/Transforms/TransformInterpreterUtils.cpp:234:10 #14 0x55e294582446 in (anonymous namespace)::InterpreterPass::runOnOperation() mlir/lib/Dialect/Transform/Transforms/InterpreterPass.cpp:147:16 #15 0x55e2978e93c6 in operator() mlir/lib/Pass/Pass.cpp:527:17 #16 0x55e2978e93c6 in void llvm::function_ref<void ()>::callback_fn<mlir::detail::OpToOpPassAdaptor::run(mlir::Pass*, mlir::Operation*, mlir::AnalysisManager, bool, unsigned int)::$_1>(long) llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 #17 0x55e2978e207a in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 #18 0x55e2978e207a in executeAction<mlir::PassExecutionAction, mlir::Pass &> mlir/include/mlir/IR/MLIRContext.h:275:7 #19 0x55e2978e207a in mlir::detail::OpToOpPassAdaptor::run(mlir::Pass*, mlir::Operation*, mlir::AnalysisManager, bool, unsigned int) mlir/lib/Pass/Pass.cpp:521:21 #20 0x55e2978e5fbf in runPipeline mlir/lib/Pass/Pass.cpp:593:16 #21 0x55e2978e5fbf in mlir::PassManager::runPasses(mlir::Operation*, mlir::AnalysisManager) mlir/lib/Pass/Pass.cpp:904:10 #22 0x55e2978e5b65 in mlir::PassManager::run(mlir::Operation*) mlir/lib/Pass/Pass.cpp:884:60 #23 0x55e291ebb460 in performActions(llvm::raw_ostream&, std::__u::shared_ptr<llvm::SourceMgr> const&, mlir::MLIRContext*, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:408:17 #24 0x55e291ebabd9 in processBuffer mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:481:9 #25 0x55e291ebabd9 in operator() mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:548:12 #26 0x55e291ebabd9 in llvm::LogicalResult llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>::callback_fn<mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&)::$_0>(long, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&) llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 #27 0x55e297b1cffe in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 #28 0x55e297b1cffe in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef)::$_0::operator()(llvm::StringRef) const mlir/lib/Support/ToolUtilities.cpp:86:16 #29 0x55e297b1c9c5 in interleave<const llvm::StringRef *, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), (lambda at llvm/include/llvm/ADT/STLExtras.h:2147:49), void> llvm/include/llvm/ADT/STLExtras.h:2125:3 #30 0x55e297b1c9c5 in interleave<llvm::SmallVector<llvm::StringRef, 8U>, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), llvm::raw_ostream, llvm::StringRef> llvm/include/llvm/ADT/STLExtras.h:2147:3 #31 0x55e297b1c9c5 in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef) mlir/lib/Support/ToolUtilities.cpp:89:3 #32 0x55e291eb0cf0 in mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:551:10 #33 0x55e291eb115c in mlir::MlirOptMain(int, char**, llvm::StringRef, llvm::StringRef, mlir::DialectRegistry&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:589:14 #34 0x55e291eb15f8 in mlir::MlirOptMain(int, char**, llvm::StringRef, mlir::DialectRegistry&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:605:10 #35 0x55e29130d1be in main mlir/tools/mlir-opt/mlir-opt.cpp:311:33 #36 0x7fbcf3fff3d3 in __libc_start_main (/usr/grte/v5/lib64/libc.so.6+0x613d3) (BuildId: 9a996398ce14a94560b0c642eb4f6e94) #37 0x55e2912365a9 in _start /usr/grte/v5/debug-src/src/csu/../sysdeps/x86_64/start.S:120 0x502000006cd8 is located 8 bytes inside of 16-byte region [0x502000006cd0,0x502000006ce0) freed by thread T0 here: #0 0x55e29130b7e2 in operator delete(void*, unsigned long) compiler-rt/lib/asan/asan_new_delete.cpp:155:3 #1 0x55e2979eb657 in __libcpp_operator_delete<void *, unsigned long> #2 0x55e2979eb657 in __do_deallocate_handle_size<> #3 0x55e2979eb657 in __libcpp_deallocate #4 0x55e2979eb657 in deallocate #5 0x55e2979eb657 in deallocate #6 0x55e2979eb657 in operator() #7 0x55e2979eb657 in ~vector #8 0x55e2979eb657 in mlir::Block::~Block() mlir/lib/IR/Block.cpp:24:1 #9 0x55e2979ebc17 in deleteNode llvm/include/llvm/ADT/ilist.h:42:39 #10 0x55e2979ebc17 in erase llvm/include/llvm/ADT/ilist.h:205:5 #11 0x55e2979ebc17 in erase llvm/include/llvm/ADT/ilist.h:209:39 #12 0x55e2979ebc17 in mlir::Block::erase() mlir/lib/IR/Block.cpp:67:28 #13 0x55e297aef978 in mlir::RewriterBase::eraseBlock(mlir::Block*) mlir/lib/IR/PatternMatch.cpp:245:10 #14 0x55e297af0563 in mlir::RewriterBase::inlineBlockBefore(mlir::Block*, mlir::Block*, llvm::ilist_iterator<llvm::ilist_detail::node_options<mlir::Operation, false, false, void, false, void>, false, false>, mlir::ValueRange) mlir/lib/IR/PatternMatch.cpp:331:3 #15 0x55e297af06d8 in mlir::RewriterBase::mergeBlocks(mlir::Block*, mlir::Block*, mlir::ValueRange) mlir/lib/IR/PatternMatch.cpp:341:3 #16 0x55e297036608 in mlir::scf::ForOp::replaceWithAdditionalYields(mlir::RewriterBase&, mlir::ValueRange, bool, std::__u::function<llvm::SmallVector<mlir::Value, 6u> (mlir::OpBuilder&, mlir::Location, llvm::ArrayRef<mlir::BlockArgument>)> const&) mlir/lib/Dialect/SCF/IR/SCF.cpp:575:12 #17 0x55e2970673ca in mlir::detail::LoopLikeOpInterfaceInterfaceTraits::Model<mlir::scf::ForOp>::replaceWithAdditionalYields(mlir::detail::LoopLikeOpInterfaceInterfaceTraits::Concept const*, mlir::Operation*, mlir::RewriterBase&, mlir::ValueRange, bool, std::__u::function<llvm::SmallVector<mlir::Value, 6u> (mlir::OpBuilder&, mlir::Location, llvm::ArrayRef<mlir::BlockArgument>)> const&) blaze-out/k8-opt-asan/bin/mlir/include/mlir/Interfaces/LoopLikeInterface.h.inc:658:56 #18 0x55e2978d5feb in replaceWithAdditionalYields blaze-out/k8-opt-asan/bin/mlir/include/mlir/Interfaces/LoopLikeInterface.cpp.inc:105:14 #19 0x55e2978d5feb in mlir::createFused(mlir::LoopLikeOpInterface, mlir::LoopLikeOpInterface, mlir::RewriterBase&, std::__u::function<llvm::SmallVector<mlir::Value, 6u> (mlir::OpBuilder&, mlir::Location, llvm::ArrayRef<mlir::BlockArgument>)>, llvm::function_ref<void (mlir::RewriterBase&, mlir::LoopLikeOpInterface, mlir::LoopLikeOpInterface&, mlir::IRMapping)>) mlir/lib/Interfaces/LoopLikeInterface.cpp:135:14 #20 0x55e2952a614b in mlir::fuseIndependentSiblingForLoops(mlir::scf::ForOp, mlir::scf::ForOp, mlir::RewriterBase&) mlir/lib/Dialect/SCF/Utils/Utils.cpp:1398:43 #21 0x55e291480c6f in mlir::transform::LoopFuseSiblingOp::apply(mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) mlir/lib/Dialect/SCF/TransformOps/SCFTransformOps.cpp:482:17 #22 0x55e29149ed5e in mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Model<mlir::transform::LoopFuseSiblingOp>::apply(mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Concept const*, mlir::Operation*, mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.h.inc:477:56 #23 0x55e297494a60 in apply blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.cpp.inc:61:14 #24 0x55e297494a60 in mlir::transform::TransformState::applyTransform(mlir::transform::TransformOpInterface) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:953:48 #25 0x55e294646a8d in applySequenceBlock(mlir::Block&, mlir::transform::FailurePropagationMode, mlir::transform::TransformState&, mlir::transform::TransformResults&) mlir/lib/Dialect/Transform/IR/TransformOps.cpp:1788:15 #26 0x55e29464f927 in mlir::transform::NamedSequenceOp::apply(mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) mlir/lib/Dialect/Transform/IR/TransformOps.cpp:2155:10 #27 0x55e2945d28ee in mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Model<mlir::transform::NamedSequenceOp>::apply(mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Concept const*, mlir::Operation*, mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.h.inc:477:56 #28 0x55e297494a60 in apply blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.cpp.inc:61:14 #29 0x55e297494a60 in mlir::transform::TransformState::applyTransform(mlir::transform::TransformOpInterface) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:953:48 #30 0x55e2974a5fe2 in mlir::transform::applyTransforms(mlir::Operation*, mlir::transform::TransformOpInterface, mlir::RaggedArray<llvm::PointerUnion<mlir::Operation*, mlir::Attribute, mlir::Value>> const&, mlir::transform::TransformOptions const&, bool) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:2016:16 #31 0x55e2945888d7 in mlir::transform::applyTransformNamedSequence(mlir::RaggedArray<llvm::PointerUnion<mlir::Operation*, mlir::Attribute, mlir::Value>>, mlir::transform::TransformOpInterface, mlir::ModuleOp, mlir::transform::TransformOptions const&) mlir/lib/Dialect/Transform/Transforms/TransformInterpreterUtils.cpp:234:10 #32 0x55e294582446 in (anonymous namespace)::InterpreterPass::runOnOperation() mlir/lib/Dialect/Transform/Transforms/InterpreterPass.cpp:147:16 #33 0x55e2978e93c6 in operator() mlir/lib/Pass/Pass.cpp:527:17 #34 0x55e2978e93c6 in void llvm::function_ref<void ()>::callback_fn<mlir::detail::OpToOpPassAdaptor::run(mlir::Pass*, mlir::Operation*, mlir::AnalysisManager, bool, unsigned int)::$_1>(long) llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 #35 0x55e2978e207a in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 #36 0x55e2978e207a in executeAction<mlir::PassExecutionAction, mlir::Pass &> mlir/include/mlir/IR/MLIRContext.h:275:7 #37 0x55e2978e207a in mlir::detail::OpToOpPassAdaptor::run(mlir::Pass*, mlir::Operation*, mlir::AnalysisManager, bool, unsigned int) mlir/lib/Pass/Pass.cpp:521:21 #38 0x55e2978e5fbf in runPipeline mlir/lib/Pass/Pass.cpp:593:16 #39 0x55e2978e5fbf in mlir::PassManager::runPasses(mlir::Operation*, mlir::AnalysisManager) mlir/lib/Pass/Pass.cpp:904:10 #40 0x55e2978e5b65 in mlir::PassManager::run(mlir::Operation*) mlir/lib/Pass/Pass.cpp:884:60 #41 0x55e291ebb460 in performActions(llvm::raw_ostream&, std::__u::shared_ptr<llvm::SourceMgr> const&, mlir::MLIRContext*, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:408:17 #42 0x55e291ebabd9 in processBuffer mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:481:9 #43 0x55e291ebabd9 in operator() mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:548:12 #44 0x55e291ebabd9 in llvm::LogicalResult llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>::callback_fn<mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&)::$_0>(long, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&) llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 #45 0x55e297b1cffe in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 #46 0x55e297b1cffe in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef)::$_0::operator()(llvm::StringRef) const mlir/lib/Support/ToolUtilities.cpp:86:16 #47 0x55e297b1c9c5 in interleave<const llvm::StringRef *, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), (lambda at llvm/include/llvm/ADT/STLExtras.h:2147:49), void> llvm/include/llvm/ADT/STLExtras.h:2125:3 #48 0x55e297b1c9c5 in interleave<llvm::SmallVector<llvm::StringRef, 8U>, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), llvm::raw_ostream, llvm::StringRef> llvm/include/llvm/ADT/STLExtras.h:2147:3 #49 0x55e297b1c9c5 in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef) mlir/lib/Support/ToolUtilities.cpp:89:3 #50 0x55e291eb0cf0 in mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:551:10 #51 0x55e291eb115c in mlir::MlirOptMain(int, char**, llvm::StringRef, llvm::StringRef, mlir::DialectRegistry&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:589:14 previously allocated by thread T0 here: #0 0x55e29130ab5d in operator new(unsigned long) compiler-rt/lib/asan/asan_new_delete.cpp:86:3 #1 0x55e2979ed5d4 in __libcpp_operator_new<unsigned long> #2 0x55e2979ed5d4 in __libcpp_allocate #3 0x55e2979ed5d4 in allocate #4 0x55e2979ed5d4 in __allocate_at_least<std::__u::allocator<mlir::BlockArgument> > #5 0x55e2979ed5d4 in __split_buffer #6 0x55e2979ed5d4 in mlir::BlockArgument* std::__u::vector<mlir::BlockArgument, std::__u::allocator<mlir::BlockArgument>>::__push_back_slow_path<mlir::BlockArgument const&>(mlir::BlockArgument const&) #7 0x55e2979ec0f2 in push_back #8 0x55e2979ec0f2 in mlir::Block::addArgument(mlir::Type, mlir::Location) mlir/lib/IR/Block.cpp:154:13 #9 0x55e29796e457 in parseRegionBody mlir/lib/AsmParser/Parser.cpp:2172:34 #10 0x55e29796e457 in (anonymous namespace)::OperationParser::parseRegion(mlir::Region&, llvm::ArrayRef<mlir::OpAsmParser::Argument>, bool) mlir/lib/AsmParser/Parser.cpp:2121:7 #11 0x55e29796b25e in (anonymous namespace)::CustomOpAsmParser::parseRegion(mlir::Region&, llvm::ArrayRef<mlir::OpAsmParser::Argument>, bool) mlir/lib/AsmParser/Parser.cpp:1785:16 #12 0x55e297035742 in mlir::scf::ForOp::parse(mlir::OpAsmParser&, mlir::OperationState&) mlir/lib/Dialect/SCF/IR/SCF.cpp:521:14 #13 0x55e291322c18 in llvm::ParseResult llvm::detail::UniqueFunctionBase<llvm::ParseResult, mlir::OpAsmParser&, mlir::OperationState&>::CallImpl<llvm::ParseResult (*)(mlir::OpAsmParser&, mlir::OperationState&)>(void*, mlir::OpAsmParser&, mlir::OperationState&) llvm/include/llvm/ADT/FunctionExtras.h:220:12 #14 0x55e29795bea3 in operator() llvm/include/llvm/ADT/FunctionExtras.h:384:12 #15 0x55e29795bea3 in callback_fn<llvm::unique_function<llvm::ParseResult (mlir::OpAsmParser &, mlir::OperationState &)> > llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 #16 0x55e29795bea3 in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 #17 0x55e29795bea3 in parseOperation mlir/lib/AsmParser/Parser.cpp:1521:9 #18 0x55e29795bea3 in parseCustomOperation mlir/lib/AsmParser/Parser.cpp:2017:19 #19 0x55e29795bea3 in (anonymous namespace)::OperationParser::parseOperation() mlir/lib/AsmParser/Parser.cpp:1174:10 #20 0x55e297971d20 in parseBlockBody mlir/lib/AsmParser/Parser.cpp:2296:9 #21 0x55e297971d20 in (anonymous namespace)::OperationParser::parseBlock(mlir::Block*&) mlir/lib/AsmParser/Parser.cpp:2226:12 #22 0x55e29796e4f5 in parseRegionBody mlir/lib/AsmParser/Parser.cpp:2184:7 #23 0x55e29796e4f5 in (anonymous namespace)::OperationParser::parseRegion(mlir::Region&, llvm::ArrayRef<mlir::OpAsmParser::Argument>, bool) mlir/lib/AsmParser/Parser.cpp:2121:7 #24 0x55e29796b25e in (anonymous namespace)::CustomOpAsmParser::parseRegion(mlir::Region&, llvm::ArrayRef<mlir::OpAsmParser::Argument>, bool) mlir/lib/AsmParser/Parser.cpp:1785:16 #25 0x55e29796b2cf in (anonymous namespace)::CustomOpAsmParser::parseOptionalRegion(mlir::Region&, llvm::ArrayRef<mlir::OpAsmParser::Argument>, bool) mlir/lib/AsmParser/Parser.cpp:1796:12 #26 0x55e2978d89ff in mlir::function_interface_impl::parseFunctionOp(mlir::OpAsmParser&, mlir::OperationState&, bool, mlir::StringAttr, llvm::function_ref<mlir::Type (mlir::Builder&, llvm::ArrayRef<mlir::Type>, llvm::ArrayRef<mlir::Type>, mlir::function_interface_impl::VariadicFlag, std::__u::basic_string<char, std::__u::char_traits<char>, std::__u::allocator<char>>&)>, mlir::StringAttr, mlir::StringAttr) mlir/lib/Interfaces/FunctionImplementation.cpp:232:14 #27 0x55e2969ba41d in mlir::func::FuncOp::parse(mlir::OpAsmParser&, mlir::OperationState&) mlir/lib/Dialect/Func/IR/FuncOps.cpp:203:10 #28 0x55e291322c18 in llvm::ParseResult llvm::detail::UniqueFunctionBase<llvm::ParseResult, mlir::OpAsmParser&, mlir::OperationState&>::CallImpl<llvm::ParseResult (*)(mlir::OpAsmParser&, mlir::OperationState&)>(void*, mlir::OpAsmParser&, mlir::OperationState&) llvm/include/llvm/ADT/FunctionExtras.h:220:12 #29 0x55e29795bea3 in operator() llvm/include/llvm/ADT/FunctionExtras.h:384:12 #30 0x55e29795bea3 in callback_fn<llvm::unique_function<llvm::ParseResult (mlir::OpAsmParser &, mlir::OperationState &)> > llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 #31 0x55e29795bea3 in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 #32 0x55e29795bea3 in parseOperation mlir/lib/AsmParser/Parser.cpp:1521:9 #33 0x55e29795bea3 in parseCustomOperation mlir/lib/AsmParser/Parser.cpp:2017:19 #34 0x55e29795bea3 in (anonymous namespace)::OperationParser::parseOperation() mlir/lib/AsmParser/Parser.cpp:1174:10 #35 0x55e297959b78 in parse mlir/lib/AsmParser/Parser.cpp:2725:20 #36 0x55e297959b78 in mlir::parseAsmSourceFile(llvm::SourceMgr const&, mlir::Block*, mlir::ParserConfig const&, mlir::AsmParserState*, mlir::AsmParserCodeCompleteContext*) mlir/lib/AsmParser/Parser.cpp:2785:41 #37 0x55e29790d5c2 in mlir::parseSourceFile(std::__u::shared_ptr<llvm::SourceMgr> const&, mlir::Block*, mlir::ParserConfig const&, mlir::LocationAttr*) mlir/lib/Parser/Parser.cpp:46:10 #38 0x55e291ebbfe2 in parseSourceFile<mlir::ModuleOp, const std::__u::shared_ptr<llvm::SourceMgr> &> mlir/include/mlir/Parser/Parser.h:159:14 #39 0x55e291ebbfe2 in parseSourceFile<mlir::ModuleOp> mlir/include/mlir/Parser/Parser.h:189:10 #40 0x55e291ebbfe2 in mlir::parseSourceFileForTool(std::__u::shared_ptr<llvm::SourceMgr> const&, mlir::ParserConfig const&, bool) mlir/include/mlir/Tools/ParseUtilities.h:31:12 #41 0x55e291ebb263 in performActions(llvm::raw_ostream&, std::__u::shared_ptr<llvm::SourceMgr> const&, mlir::MLIRContext*, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:383:33 #42 0x55e291ebabd9 in processBuffer mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:481:9 #43 0x55e291ebabd9 in operator() mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:548:12 #44 0x55e291ebabd9 in llvm::LogicalResult llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>::callback_fn<mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&)::$_0>(long, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&) llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 #45 0x55e297b1cffe in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 #46 0x55e297b1cffe in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef)::$_0::operator()(llvm::StringRef) const mlir/lib/Support/ToolUtilities.cpp:86:16 #47 0x55e297b1c9c5 in interleave<const llvm::StringRef *, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), (lambda at llvm/include/llvm/ADT/STLExtras.h:2147:49), void> llvm/include/llvm/ADT/STLExtras.h:2125:3 #48 0x55e297b1c9c5 in interleave<llvm::SmallVector<llvm::StringRef, 8U>, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), llvm::raw_ostream, llvm::StringRef> llvm/include/llvm/ADT/STLExtras.h:2147:3 #49 0x55e297b1c9c5 in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef) mlir/lib/Support/ToolUtilities.cpp:89:3 #50 0x55e291eb0cf0 in mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:551:10 #51 0x55e291eb115c in mlir::MlirOptMain(int, char**, llvm::StringRef, llvm::StringRef, mlir::DialectRegistry&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:589:14 #52 0x55e291eb15f8 in mlir::MlirOptMain(int, char**, llvm::StringRef, mlir::DialectRegistry&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:605:10 #53 0x55e29130d1be in main mlir/tools/mlir-opt/mlir-opt.cpp:311:33 #54 0x7fbcf3fff3d3 in __libc_start_main (/usr/grte/v5/lib64/libc.so.6+0x613d3) (BuildId: 9a996398ce14a94560b0c642eb4f6e94) #55 0x55e2912365a9 in _start /usr/grte/v5/debug-src/src/csu/../sysdeps/x86_64/start.S:120 SUMMARY: AddressSanitizer: heap-use-after-free mlir/include/mlir/IR/IRMapping.h:40:11 in map<llvm::MutableArrayRef<mlir::BlockArgument> &, llvm::MutableArrayRef<mlir::BlockArgument>, nullptr> Shadow bytes around the buggy address: 0x502000006a00: fa fa 00 fa fa fa 00 00 fa fa 00 fa fa fa 00 fa 0x502000006a80: fa fa 00 fa fa fa 00 00 fa fa 00 00 fa fa 00 00 0x502000006b00: fa fa 00 00 fa fa 00 00 fa fa 00 fa fa fa 00 fa 0x502000006b80: fa fa 00 fa fa fa 00 fa fa fa 00 00 fa fa 00 00 0x502000006c00: fa fa 00 00 fa fa 00 00 fa fa 00 00 fa fa fd fa =>0x502000006c80: fa fa fd fa fa fa fd fd fa fa fd[fd]fa fa fd fd 0x502000006d00: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa 00 fa 0x502000006d80: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa 00 fa 0x502000006e00: fa fa 00 fa fa fa 00 fa fa fa 00 00 fa fa 00 fa 0x502000006e80: fa fa 00 fa fa fa 00 00 fa fa 00 fa fa fa 00 fa 0x502000006f00: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa 00 fa Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb ==4320==ABORTING

This test is currently flaky on a local Windows amd64 build. The reason is that it relies on the order of `process.threads` but this order is nondeterministic: If we print lldb's inputs and outputs while running, we can see that the breakpoints are always being set correctly, and always being hit: ```sh runCmd: breakpoint set -f "main.c" -l 2 output: Breakpoint 1: where = a.out`func_inner + 1 at main.c:2:9, address = 0x0000000140001001 runCmd: breakpoint set -f "main.c" -l 7 output: Breakpoint 2: where = a.out`main + 17 at main.c:7:5, address = 0x0000000140001021 runCmd: run output: Process 52328 launched: 'C:\workspace\llvm-project\llvm\build\lldb-test-build.noindex\functionalities\unwind\zeroth_frame\TestZerothFrame.test_dwarf\a.out' (x86_64) Process 52328 stopped * thread #1, stop reason = breakpoint 1.1 frame #0: 0x00007ff68f6b1001 a.out`func_inner at main.c:2:9 1 void func_inner() { -> 2 int a = 1; // Set breakpoint 1 here ^ 3 } 4 5 int main() { 6 func_inner(); 7 return 0; // Set breakpoint 2 here ``` However, sometimes the backtrace printed in this test shows that the process is stopped inside NtWaitForWorkViaWorkerFactory from `ntdll.dll`: ```sh Backtrace at the first breakpoint: frame #0: 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 frame #1: 0x00007ffecc74585e ntdll.dll`RtlClearThreadWorkOnBehalfTicket + 862 frame #2: 0x00007ffecc3e257d kernel32.dll`BaseThreadInitThunk + 29 frame #3: 0x00007ffecc76af28 ntdll.dll`RtlUserThreadStart + 40 ``` When this happens, the test fails with an assertion error that the stopped thread's zeroth frame's current line number does not match the expected line number. This is because the test is looking at the wrong thread: `process.threads[0]`. If we print the list of threads each time the test is run, we notice that threads are sometimes in a different order, within `process.threads`: ```sh Thread 0: thread #4: tid = 0x9c38, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 Thread 1: thread #2: tid = 0xa950, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 Thread 2: thread #1: tid = 0xab18, 0x00007ff64bc81001 a.out`func_inner at main.c:2:9, stop reason = breakpoint 1.1 Thread 3: thread #3: tid = 0xc514, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 Thread 0: thread #3: tid = 0x018c, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 Thread 1: thread #1: tid = 0x85c8, 0x00007ff7130c1001 a.out`func_inner at main.c:2:9, stop reason = breakpoint 1.1 Thread 2: thread #2: tid = 0xf344, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 Thread 3: thread #4: tid = 0x6a50, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 ``` Use `self.thread()` to consistently select the correct thread, instead. Co-authored-by: kendal <[email protected]>

…linux (#99613) Examples of the output: ARM: ``` # ./a.out AddressSanitizer:DEADLYSIGNAL ================================================================= ==122==ERROR: AddressSanitizer: SEGV on unknown address 0x0000007a (pc 0x76e13ac0 bp 0x7eb7fd00 sp 0x7eb7fcc8 T0) ==122==The signal is caused by a READ memory access. ==122==Hint: address points to the zero page. #0 0x76e13ac0 (/lib/libc.so.6+0x7cac0) #1 0x76dce680 in gsignal (/lib/libc.so.6+0x37680) #2 0x005c2250 (/root/a.out+0x145250) #3 0x76db982c (/lib/libc.so.6+0x2282c) #4 0x76db9918 in __libc_start_main (/lib/libc.so.6+0x22918) ==122==Register values: r0 = 0x00000000 r1 = 0x0000007a r2 = 0x0000000b r3 = 0x76d95020 r4 = 0x0000007a r5 = 0x00000001 r6 = 0x005dcc5c r7 = 0x0000010c r8 = 0x0000000b r9 = 0x76f9ece0 r10 = 0x00000000 r11 = 0x7eb7fd00 r12 = 0x76dce670 sp = 0x7eb7fcc8 lr = 0x76e13ab4 pc = 0x76e13ac0 AddressSanitizer can not provide additional info. SUMMARY: AddressSanitizer: SEGV (/lib/libc.so.6+0x7cac0) ==122==ABORTING ``` AArch64: ``` # ./a.out UndefinedBehaviorSanitizer:DEADLYSIGNAL ==99==ERROR: UndefinedBehaviorSanitizer: SEGV on unknown address 0x000000000063 (pc 0x007fbbbc5860 bp 0x007fcfdcb700 sp 0x007fcfdcb700 T99) ==99==The signal is caused by a UNKNOWN memory access. ==99==Hint: address points to the zero page. #0 0x007fbbbc5860 (/lib64/libc.so.6+0x82860) #1 0x007fbbb81578 (/lib64/libc.so.6+0x3e578) #2 0x00556051152c (/root/a.out+0x3152c) #3 0x007fbbb6e268 (/lib64/libc.so.6+0x2b268) #4 0x007fbbb6e344 (/lib64/libc.so.6+0x2b344) #5 0x0055604e45ec (/root/a.out+0x45ec) ==99==Register values: x0 = 0x0000000000000000 x1 = 0x0000000000000063 x2 = 0x000000000000000b x3 = 0x0000007fbbb41440 x4 = 0x0000007fbbb41580 x5 = 0x3669288942d44cce x6 = 0x0000000000000000 x7 = 0x00000055605110b0 x8 = 0x0000000000000083 x9 = 0x0000000000000000 x10 = 0x0000000000000000 x11 = 0x0000000000000000 x12 = 0x0000007fbbdb3360 x13 = 0x0000000000010000 x14 = 0x0000000000000039 x15 = 0x00000000004113a0 x16 = 0x0000007fbbb81560 x17 = 0x0000005560540138 x18 = 0x000000006474e552 x19 = 0x0000000000000063 x20 = 0x0000000000000001 x21 = 0x000000000000000b x22 = 0x0000005560511510 x23 = 0x0000007fcfdcb918 x24 = 0x0000007fbbdb1b50 x25 = 0x0000000000000000 x26 = 0x0000007fbbdb2000 x27 = 0x000000556053f858 x28 = 0x0000000000000000 fp = 0x0000007fcfdcb700 lr = 0x0000007fbbbc584c sp = 0x0000007fcfdcb700 UndefinedBehaviorSanitizer can not provide additional info. SUMMARY: UndefinedBehaviorSanitizer: SEGV (/lib64/libc.so.6+0x82860) ==99==ABORTING ```

Somewhat confusingly a `SCEVMulExpr` is a `SCEVNAryExpr`, so can have > 2 operands. Previously, the vscale immediate matching did not check the number of operands of the `SCEVMulExpr`, so would ignore any operands after the first two. This led to incorrect codegen (and results) for ArmSME in IREE (https://github.com/iree-org/iree), which sometimes addresses things that are a `vscale * vscale` multiple away. The test added with this change shows an example reduced from IREE. The second write should be offset from the first `16 * vscale * vscale` (* 4 bytes), however, previously LSR dropped the second vscale and instead offset the write by `#4, mul vl`, which is an offset of `16 * vscale` (* 4 bytes).

Compilers and language runtimes often use helper functions that are fundamentally uninteresting when debugging anything but the compiler/runtime itself. This patch introduces a user-extensible mechanism that allows for these frames to be hidden from backtraces and automatically skipped over when navigating the stack with `up` and `down`. This does not affect the numbering of frames, so `f <N>` will still provide access to the hidden frames. The `bt` output will also print a hint that frames have been hidden. My primary motivation for this feature is to hide thunks in the Swift programming language, but I'm including an example recognizer for `std::function::operator()` that I wished for myself many times while debugging LLDB. rdar://126629381 Example output. (Yes, my proof-of-concept recognizer could hide even more frames if we had a method that returned the function name without the return type or I used something that isn't based off regex, but it's really only meant as an example). before: ``` (lldb) thread backtrace --filtered=false * thread #1, queue = 'com.apple.main-thread', stop reason = breakpoint 1.1 * frame #0: 0x0000000100001f04 a.out`foo(x=1, y=1) at main.cpp:4:10 frame #1: 0x0000000100003a00 a.out`decltype(std::declval<int (*&)(int, int)>()(std::declval<int>(), std::declval<int>())) std::__1::__invoke[abi:se200000]<int (*&)(int, int), int, int>(__f=0x000000016fdff280, __args=0x000000016fdff224, __args=0x000000016fdff220) at invoke.h:149:25 frame #2: 0x000000010000399c a.out`int std::__1::__invoke_void_return_wrapper<int, false>::__call[abi:se200000]<int (*&)(int, int), int, int>(__args=0x000000016fdff280, __args=0x000000016fdff224, __args=0x000000016fdff220) at invoke.h:216:12 frame #3: 0x0000000100003968 a.out`std::__1::__function::__alloc_func<int (*)(int, int), std::__1::allocator<int (*)(int, int)>, int (int, int)>::operator()[abi:se200000](this=0x000000016fdff280, __arg=0x000000016fdff224, __arg=0x000000016fdff220) at function.h:171:12 frame #4: 0x00000001000026bc a.out`std::__1::__function::__func<int (*)(int, int), std::__1::allocator<int (*)(int, int)>, int (int, int)>::operator()(this=0x000000016fdff278, __arg=0x000000016fdff224, __arg=0x000000016fdff220) at function.h:313:10 frame #5: 0x0000000100003c38 a.out`std::__1::__function::__value_func<int (int, int)>::operator()[abi:se200000](this=0x000000016fdff278, __args=0x000000016fdff224, __args=0x000000016fdff220) const at function.h:430:12 frame #6: 0x0000000100002038 a.out`std::__1::function<int (int, int)>::operator()(this= Function = foo(int, int) , __arg=1, __arg=1) const at function.h:989:10 frame #7: 0x0000000100001f64 a.out`main(argc=1, argv=0x000000016fdff4f8) at main.cpp:9:10 frame #8: 0x0000000183cdf154 dyld`start + 2476 (lldb) ``` after ``` (lldb) bt * thread #1, queue = 'com.apple.main-thread', stop reason = breakpoint 1.1 * frame #0: 0x0000000100001f04 a.out`foo(x=1, y=1) at main.cpp:4:10 frame #1: 0x0000000100003a00 a.out`decltype(std::declval<int (*&)(int, int)>()(std::declval<int>(), std::declval<int>())) std::__1::__invoke[abi:se200000]<int (*&)(int, int), int, int>(__f=0x000000016fdff280, __args=0x000000016fdff224, __args=0x000000016fdff220) at invoke.h:149:25 frame #2: 0x000000010000399c a.out`int std::__1::__invoke_void_return_wrapper<int, false>::__call[abi:se200000]<int (*&)(int, int), int, int>(__args=0x000000016fdff280, __args=0x000000016fdff224, __args=0x000000016fdff220) at invoke.h:216:12 frame #6: 0x0000000100002038 a.out`std::__1::function<int (int, int)>::operator()(this= Function = foo(int, int) , __arg=1, __arg=1) const at function.h:989:10 frame #7: 0x0000000100001f64 a.out`main(argc=1, argv=0x000000016fdff4f8) at main.cpp:9:10 frame #8: 0x0000000183cdf154 dyld`start + 2476 Note: Some frames were hidden by frame recognizers ```

`JITDylibSearchOrderResolver` local variable can be destroyed before completion of all callbacks. Capture it together with `Deps` in `OnEmitted` callback. Original error: ``` ==2035==ERROR: AddressSanitizer: stack-use-after-return on address 0x7bebfa155b70 at pc 0x7ff2a9a88b4a bp 0x7bec08d51980 sp 0x7bec08d51978 READ of size 8 at 0x7bebfa155b70 thread T87 (tf_xla-cpu-llvm) #0 0x7ff2a9a88b49 in operator() llvm/lib/ExecutionEngine/Orc/RTDyldObjectLinkingLayer.cpp:55:58 #1 0x7ff2a9a88b49 in __invoke<(lambda at llvm/lib/ExecutionEngine/Orc/RTDyldObjectLinkingLayer.cpp:55:9) &, const llvm::DenseMap<llvm::orc::JITDylib *, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void> >, llvm::DenseMapInfo<llvm::orc::JITDylib *, void>, llvm::detail::DenseMapPair<llvm::orc::JITDylib *, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void> > > > &> libcxx/include/__type_traits/invoke.h:149:25 #2 0x7ff2a9a88b49 in __call<(lambda at llvm/lib/ExecutionEngine/Orc/RTDyldObjectLinkingLayer.cpp:55:9) &, const llvm::DenseMap<llvm::orc::JITDylib *, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void> >, llvm::DenseMapInfo<llvm::orc::JITDylib *, void>, llvm::detail::DenseMapPair<llvm::orc::JITDylib *, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void> > > > &> libcxx/include/__type_traits/invoke.h:224:5 #3 0x7ff2a9a88b49 in operator() libcxx/include/__functional/function.h:210:12 #4 0x7ff2a9a88b49 in void std::__u::__function::__policy_invoker<void (llvm::DenseMap<llvm::orc::JITDylib*, llvm::DenseSet<llvm::orc::SymbolStringPtr, ```

Static destructor can race with calls to notify and trigger tsan warning. ``` WARNING: ThreadSanitizer: data race (pid=5787) Write of size 1 at 0x55bec9df8de8 by thread T23: #0 pthread_mutex_destroy [third_party/llvm/llvm-project/compiler-rt/lib/tsan/rtl/tsan_interceptors_posix.cpp:1344](third_party/llvm/llvm-project/compiler-rt/lib/tsan/rtl/tsan_interceptors_posix.cpp?l=1344&cl=669089572):3 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x1b12affb) (BuildId: ff25ace8b17d9863348bb1759c47246c) #1 __libcpp_recursive_mutex_destroy [third_party/crosstool/v18/stable/src/libcxx/include/__thread/support/pthread.h:91](third_party/crosstool/v18/stable/src/libcxx/include/__thread/support/pthread.h?l=91&cl=669089572):10 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x4523d4e9) (BuildId: ff25ace8b17d9863348bb1759c47246c) #2 std::__tsan::recursive_mutex::~recursive_mutex() [third_party/crosstool/v18/stable/src/libcxx/src/mutex.cpp:52](third_party/crosstool/v18/stable/src/libcxx/src/mutex.cpp?l=52&cl=669089572):11 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x4523d4e9) #3 ~SmartMutex [third_party/llvm/llvm-project/llvm/include/llvm/Support/Mutex.h:28](third_party/llvm/llvm-project/llvm/include/llvm/Support/Mutex.h?l=28&cl=669089572):11 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x2bcaedfe) (BuildId: ff25ace8b17d9863348bb1759c47246c) #4 (anonymous namespace)::PerfJITEventListener::~PerfJITEventListener() [third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/PerfJITEvents/PerfJITEventListener.cpp:65](third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/PerfJITEvents/PerfJITEventListener.cpp?l=65&cl=669089572):3 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x2bcaedfe) #5 cxa_at_exit_callback_installed_at(void*) [third_party/llvm/llvm-project/compiler-rt/lib/tsan/rtl/tsan_interceptors_posix.cpp:437](third_party/llvm/llvm-project/compiler-rt/lib/tsan/rtl/tsan_interceptors_posix.cpp?l=437&cl=669089572):3 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x1b172cb9) (BuildId: ff25ace8b17d9863348bb1759c47246c) #6 llvm::JITEventListener::createPerfJITEventListener() [third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/PerfJITEvents/PerfJITEventListener.cpp:496](third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/PerfJITEvents/PerfJITEventListener.cpp?l=496&cl=669089572):3 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x2bcad8f5) (BuildId: ff25ace8b17d9863348bb1759c47246c) ``` ``` Previous atomic read of size 1 at 0x55bec9df8de8 by thread T192 (mutexes: write M0, write M1): #0 pthread_mutex_unlock [third_party/llvm/llvm-project/compiler-rt/lib/tsan/rtl/tsan_interceptors_posix.cpp:1387](third_party/llvm/llvm-project/compiler-rt/lib/tsan/rtl/tsan_interceptors_posix.cpp?l=1387&cl=669089572):3 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x1b12b6bb) (BuildId: ff25ace8b17d9863348bb1759c47246c) #1 __libcpp_recursive_mutex_unlock [third_party/crosstool/v18/stable/src/libcxx/include/__thread/support/pthread.h:87](third_party/crosstool/v18/stable/src/libcxx/include/__thread/support/pthread.h?l=87&cl=669089572):10 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x4523d589) (BuildId: ff25ace8b17d9863348bb1759c47246c) #2 std::__tsan::recursive_mutex::unlock() [third_party/crosstool/v18/stable/src/libcxx/src/mutex.cpp:64](third_party/crosstool/v18/stable/src/libcxx/src/mutex.cpp?l=64&cl=669089572):11 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x4523d589) #3 unlock [third_party/llvm/llvm-project/llvm/include/llvm/Support/Mutex.h:47](third_party/llvm/llvm-project/llvm/include/llvm/Support/Mutex.h?l=47&cl=669089572):16 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x2bcaf968) (BuildId: ff25ace8b17d9863348bb1759c47246c) #4 ~lock_guard [third_party/crosstool/v18/stable/src/libcxx/include/__mutex/lock_guard.h:39](third_party/crosstool/v18/stable/src/libcxx/include/__mutex/lock_guard.h?l=39&cl=669089572):101 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x2bcaf968) #5 (anonymous namespace)::PerfJITEventListener::notifyObjectLoaded(unsigned long, llvm::object::ObjectFile const&, llvm::RuntimeDyld::LoadedObjectInfo const&) [third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/PerfJITEvents/PerfJITEventListener.cpp:290](https://cs.corp.google.com/piper///depot/google3/third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/PerfJITEvents/PerfJITEventListener.cpp?l=290&cl=669089572):1 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x2bcaf968) #6 llvm::orc::RTDyldObjectLinkingLayer::onObjEmit(llvm::orc::MaterializationResponsibility&, llvm::object::OwningBinary<llvm::object::ObjectFile>, std::__tsan::unique_ptr<llvm::RuntimeDyld::MemoryManager, std::__tsan::default_delete<llvm::RuntimeDyld::MemoryManager>>, std::__tsan::unique_ptr<llvm::RuntimeDyld::LoadedObjectInfo, std::__tsan::default_delete<llvm::RuntimeDyld::LoadedObjectInfo>>, std::__tsan::unique_ptr<llvm::DenseMap<llvm::orc::JITDylib*, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void>>, llvm::DenseMapInfo<llvm::orc::JITDylib*, void>, llvm::detail::DenseMapPair<llvm::orc::JITDylib*, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void>>>>, std::__tsan::default_delete<llvm::DenseMap<llvm::orc::JITDylib*, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void>>, llvm::DenseMapInfo<llvm::orc::JITDylib*, void>, llvm::detail::DenseMapPair<llvm::orc::JITDylib*, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void>>>>>>, llvm::Error) [third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/Orc/RTDyldObjectLinkingLayer.cpp:386](https://cs.corp.google.com/piper///depot/google3/third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/Orc/RTDyldObjectLinkingLayer.cpp?l=386&cl=669089572):10 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x2bc404a8) (BuildId: ff25ace8b17d9863348bb1759c47246c) ```

When SPARC Asan testing is enabled by PR #107405, many Linux/sparc64 tests just hang like ``` #0 0xf7ae8e90 in syscall () from /usr/lib32/libc.so.6 #1 0x701065e8 in __sanitizer::FutexWait(__sanitizer::atomic_uint32_t*, unsigned int) () at compiler-rt/lib/sanitizer_common/sanitizer_linux.cpp:766 #2 0x70107c90 in Wait () at compiler-rt/lib/sanitizer_common/sanitizer_mutex.cpp:35 #3 0x700f7cac in Lock () at compiler-rt/lib/asan/../sanitizer_common/sanitizer_mutex.h:196 #4 Lock () at compiler-rt/lib/asan/../sanitizer_common/sanitizer_thread_registry.h:98 #5 LockThreads () at compiler-rt/lib/asan/asan_thread.cpp:489 #6 0x700e9c8c in __asan::BeforeFork() () at compiler-rt/lib/asan/asan_posix.cpp:157 #7 0xf7ac83f4 in ?? () from /usr/lib32/libc.so.6 Backtrace stopped: previous frame identical to this frame (corrupt stack?) ``` It turns out that this happens in tests using `internal_fork` (e.g. invoking `llvm-symbolizer`): unlike most other Linux targets, which use `clone`, Linux/sparc64 has to use `__fork` instead. While `clone` doesn't trigger `pthread_atfork` handlers, `__fork` obviously does, causing the hang. To avoid this, this patch disables `InstallAtForkHandler` and lets the ASan tests run to completion. Tested on `sparc64-unknown-linux-gnu`.

…ext is not fully initialized (#110481) As this comment around target initialization implies: ``` // This can be NULL if we don't know anything about the architecture or if // the target for an architecture isn't enabled in the llvm/clang that we // built ``` There are cases where we might fail to call `InitBuiltinTypes` when creating the backing `ASTContext` for a `TypeSystemClang`. If that happens, the builtins `QualType`s, e.g., `VoidPtrTy`/`IntTy`/etc., are not initialized and dereferencing them as we do in `GetBuiltinTypeForEncodingAndBitSize` (and other places) will lead to nullptr-dereferences. Example backtrace: ``` (lldb) run Assertion failed: (!isNull() && "Cannot retrieve a NULL type pointer"), function getCommonPtr, file Type.h, line 958. Process 2680 stopped * thread #15, name = '<lldb.process.internal-state(pid=2712)>', stop reason = hit program assert frame #4: 0x000000010cdf3cdc liblldb.20.0.0git.dylib`DWARFASTParserClang::ExtractIntFromFormValue(lldb_private::CompilerType const&, lldb_private::plugin::dwarf::DWARFFormValue const&) const (.cold.1) + liblldb.20.0.0git.dylib`DWARFASTParserClang::ParseObjCMethod(lldb_private::ObjCLanguage::MethodName const&, lldb_private::plugin::dwarf::DWARFDIE const&, lldb_private::CompilerType, ParsedDWARFTypeAttributes , bool) (.cold.1): -> 0x10cdf3cdc <+0>: stp x29, x30, [sp, #-0x10]! 0x10cdf3ce0 <+4>: mov x29, sp 0x10cdf3ce4 <+8>: adrp x0, 545 0x10cdf3ce8 <+12>: add x0, x0, #0xa25 ; "ParseObjCMethod" Target 0: (lldb) stopped. (lldb) bt * thread #15, name = '<lldb.process.internal-state(pid=2712)>', stop reason = hit program assert frame #0: 0x0000000180d08600 libsystem_kernel.dylib`__pthread_kill + 8 frame #1: 0x0000000180d40f50 libsystem_pthread.dylib`pthread_kill + 288 frame #2: 0x0000000180c4d908 libsystem_c.dylib`abort + 128 frame #3: 0x0000000180c4cc1c libsystem_c.dylib`__assert_rtn + 284 * frame #4: 0x000000010cdf3cdc liblldb.20.0.0git.dylib`DWARFASTParserClang::ExtractIntFromFormValue(lldb_private::CompilerType const&, lldb_private::plugin::dwarf::DWARFFormValue const&) const (.cold.1) + frame #5: 0x0000000109d30acc liblldb.20.0.0git.dylib`lldb_private::TypeSystemClang::GetBuiltinTypeForEncodingAndBitSize(lldb::Encoding, unsigned long) + 1188 frame #6: 0x0000000109aaaed4 liblldb.20.0.0git.dylib`DynamicLoaderMacOS::NotifyBreakpointHit(void*, lldb_private::StoppointCallbackContext*, unsigned long long, unsigned long long) + 384 ``` This patch adds a one-time user-visible warning for when we fail to initialize the AST to indicate that initialization went wrong for the given target. Additionally, we add checks for whether one of the `ASTContext` `QualType`s is invalid before dereferencing any builtin types. The warning would look as follows: ``` (lldb) target create "a.out" Current executable set to 'a.out' (arm64). (lldb) b main warning: Failed to initialize builtin ASTContext types for target 'some-unknown-triple'. Printing variables may behave unexpectedly. Breakpoint 1: where = a.out`main + 8 at stepping.cpp:5:14, address = 0x0000000100003f90 ``` rdar://134869779

…en issue Since llvm/llvm-project#109628 landed, this test has been failing on 32-bit Arm. This is due to a codegen problem (whether added or uncovered by the change, not known) where the trap instruction is placed after the frame pointer and link register are restored. llvm/llvm-project#113154 So the code was: ``` std::__1::vector<int>::operator[](unsigned int): sub sp, sp, #8 str r0, [sp, #4] str r1, [sp] add sp, sp, #8 .inst 0xe7ffdefe bx lr ``` When lldb saw the trap, the PC was inside operator[] but the frame information actually pointed to g. This bug only happens for leaf functions so adding a return type works around it: ``` std::__1::vector<int>::operator[](unsigned int): push {r11, lr} mov r11, sp sub sp, sp, #8 str r0, [sp, #4] str r1, [sp] mov sp, r11 pop {r11, lr} .inst 0xe7ffdefe bx lr ``` (and operator[] should return T& anyway) Now the PC location and frame information should match and the test passes.

… depobj construct (#114221) A codegen crash is occurring when a depend object was initialized with omp_all_memory in the depobj directive. llvm/llvm-project#114214 The root cause of issue looks to be the improper handling of the dependency list when omp_all_memory was specified. The change introduces the use of OMPTaskDataTy to manage dependencies. The buildDependences function is called to construct the dependency list, and the list is iterated over to emit and store the dependencies. Reduced Test Case : ``` #include <omp.h> int main() { omp_depend_t obj; #pragma omp depobj(obj) depend(inout: omp_all_memory) } ``` ``` #1 0x0000000003de6623 SignalHandler(int) Signals.cpp:0:0 #2 0x00007f8e4a6b990f (/lib64/libpthread.so.0+0x1690f) #3 0x00007f8e4a117d2a raise (/lib64/libc.so.6+0x4ad2a) #4 0x00007f8e4a1193e4 abort (/lib64/libc.so.6+0x4c3e4) #5 0x00007f8e4a10fc69 __assert_fail_base (/lib64/libc.so.6+0x42c69) #6 0x00007f8e4a10fcf1 __assert_fail (/lib64/libc.so.6+0x42cf1) #7 0x0000000004114367 clang::CodeGen::CodeGenFunction::EmitOMPDepobjDirective(clang::OMPDepobjDirective const&) (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0x4114367) #8 0x00000000040f8fac clang::CodeGen::CodeGenFunction::EmitStmt(clang::Stmt const*, llvm::ArrayRef<clang::Attr const*>) (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0x40f8fac) #9 0x00000000040ff4fb clang::CodeGen::CodeGenFunction::EmitCompoundStmtWithoutScope(clang::CompoundStmt const&, bool, clang::CodeGen::AggValueSlot) (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0x40ff4fb) #10 0x00000000041847b2 clang::CodeGen::CodeGenFunction::EmitFunctionBody(clang::Stmt const*) (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0x41847b2) #11 0x0000000004199e4a clang::CodeGen::CodeGenFunction::GenerateCode(clang::GlobalDecl, llvm::Function*, clang::CodeGen::CGFunctionInfo const&) (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0x4199e4a) #12 0x00000000041f7b9d clang::CodeGen::CodeGenModule::EmitGlobalFunctionDefinition(clang::GlobalDecl, llvm::GlobalValue*) (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0x41f7b9d) #13 0x00000000041f16a3 clang::CodeGen::CodeGenModule::EmitGlobalDefinition(clang::GlobalDecl, llvm::GlobalValue*) (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0x41f16a3) #14 0x00000000041fd954 clang::CodeGen::CodeGenModule::EmitDeferred() (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0x41fd954) #15 0x0000000004200277 clang::CodeGen::CodeGenModule::Release() (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0x4200277) #16 0x00000000046b6a49 (anonymous namespace)::CodeGeneratorImpl::HandleTranslationUnit(clang::ASTContext&) ModuleBuilder.cpp:0:0 #17 0x00000000046b4cb6 clang::BackendConsumer::HandleTranslationUnit(clang::ASTContext&) (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0x46b4cb6) #18 0x0000000006204d5c clang::ParseAST(clang::Sema&, bool, bool) (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0x6204d5c) #19 0x000000000496b278 clang::FrontendAction::Execute() (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0x496b278) #20 0x00000000048dd074 clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0x48dd074) #21 0x0000000004a38092 clang::ExecuteCompilerInvocation(clang::CompilerInstance*) (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0x4a38092) #22 0x0000000000fd4e9c cc1_main(llvm::ArrayRef<char const*>, char const*, void*) (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0xfd4e9c) #23 0x0000000000fcca73 ExecuteCC1Tool(llvm::SmallVectorImpl<char const*>&, llvm::ToolContext const&) driver.cpp:0:0 #24 0x0000000000fd140c clang_main(int, char**, llvm::ToolContext const&) (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0xfd140c) #25 0x0000000000ee2ef3 main (/opt/cray/pe/cce/18.0.1/cce-clang/x86_64/bin/clang-18+0xee2ef3) #26 0x00007f8e4a10224c __libc_start_main (/lib64/libc.so.6+0x3524c) #27 0x0000000000fcaae9 _start /home/abuild/rpmbuild/BUILD/glibc-2.31/csu/../sysdeps/x86_64/start.S:120:0 clang: error: unable to execute command: Aborted ``` --------- Co-authored-by: Chandra Ghale <[email protected]>

…onger cause a crash (#116569) This PR fixes a bug introduced by #110199, which causes any half float argument to crash the compiler on MIPS64. Currently compiling this bit of code with `llc -mtriple=mips64`: ``` define void @half_args(half %a) nounwind { entry: ret void } ``` Crashes with the following log: ``` LLVM ERROR: unable to allocate function argument #0 PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace. Stack dump: 0. Program arguments: llc -mtriple=mips64 1. Running pass 'Function Pass Manager' on module '<stdin>'. 2. Running pass 'MIPS DAG->DAG Pattern Instruction Selection' on function '@half_args' #0 0x000055a3a4013df8 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x32d0df8) #1 0x000055a3a401199e llvm::sys::RunSignalHandlers() (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x32ce99e) #2 0x000055a3a40144a8 SignalHandler(int) Signals.cpp:0:0 #3 0x00007f00bde558c0 __restore_rt libc_sigaction.c:0:0 #4 0x00007f00bdea462c __pthread_kill_implementation ./nptl/pthread_kill.c:44:76 #5 0x00007f00bde55822 gsignal ./signal/../sysdeps/posix/raise.c:27:6 #6 0x00007f00bde3e4af abort ./stdlib/abort.c:81:7 #7 0x000055a3a3f80e3c llvm::report_fatal_error(llvm::Twine const&, bool) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x323de3c) #8 0x000055a3a2e20dfa (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x20dddfa) #9 0x000055a3a2a34e20 llvm::MipsTargetLowering::LowerFormalArguments(llvm::SDValue, unsigned int, bool, llvm::SmallVectorImpl<llvm::ISD::InputArg> const&, llvm::SDLoc const&, llvm::SelectionDAG&, llvm::SmallVectorImpl<llvm::SDValue>&) const MipsISelLowering.cpp:0:0 #10 0x000055a3a3d896a9 llvm::SelectionDAGISel::LowerArguments(llvm::Function const&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x30466a9) #11 0x000055a3a3e0b3ec llvm::SelectionDAGISel::SelectAllBasicBlocks(llvm::Function const&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x30c83ec) #12 0x000055a3a3e09e21 llvm::SelectionDAGISel::runOnMachineFunction(llvm::MachineFunction&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x30c6e21) #13 0x000055a3a2aae1ca llvm::MipsDAGToDAGISel::runOnMachineFunction(llvm::MachineFunction&) MipsISelDAGToDAG.cpp:0:0 #14 0x000055a3a3e07706 llvm::SelectionDAGISelLegacy::runOnMachineFunction(llvm::MachineFunction&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x30c4706) #15 0x000055a3a3051ed6 llvm::MachineFunctionPass::runOnFunction(llvm::Function&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x230eed6) #16 0x000055a3a35a3ec9 llvm::FPPassManager::runOnFunction(llvm::Function&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x2860ec9) #17 0x000055a3a35ac3b2 llvm::FPPassManager::runOnModule(llvm::Module&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x28693b2) #18 0x000055a3a35a499c llvm::legacy::PassManagerImpl::run(llvm::Module&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x286199c) #19 0x000055a3a262abbb main (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x18e7bbb) #20 0x00007f00bde3fc4c __libc_start_call_main ./csu/../sysdeps/nptl/libc_start_call_main.h:74:3 #21 0x00007f00bde3fd05 call_init ./csu/../csu/libc-start.c:128:20 #22 0x00007f00bde3fd05 __libc_start_main@GLIBC_2.2.5 ./csu/../csu/libc-start.c:347:5 #23 0x000055a3a2624921 _start /builddir/glibc-2.39/csu/../sysdeps/x86_64/start.S:117:0 ``` This is caused by the fact that after the change, `f16`s are no longer lowered as `f32`s in calls. Two possible fixes are available: - Update calling conventions to properly support passing `f16` as integers. - Update `useFPRegsForHalfType()` to return `true` so that `f16` are still kept in `f32` registers, as before #110199. This PR implements the first solution to not introduce any more ABI changes as #110199 already did. As of what is the correct ABI for halfs, I don't think there is a correct answer. GCC doesn't support halfs on MIPS, and I couldn't find any information on old MIPS ABI manuals either.

…abort (#117603) Hey guys, I found that Flang's built-in ABORT function is incomplete when I was using it. Compared with gfortran's ABORT (which can both abort and print out a backtrace), flang's ABORT implementation lacks the function of printing out a backtrace. This feature is essential for debugging and understanding the call stack at the failure point. To solve this problem, I completed the "// TODO:" of the abort function, and then implemented an additional built-in function BACKTRACE for flang. After a brief reading of the relevant source code, I used backtrace and backtrace_symbols in "execinfo.h" to quickly implement this. But since I used the above two functions directly, my implementation is slightly different from gfortran's implementation (in the output, the function call stack before main is additionally output, and the function line number is missing). In addition, since I used the above two functions, I did not need to add -g to embed debug information into the ELF file, but needed -rdynamic to ensure that the symbols are added to the dynamic symbol table (so that the function name will be printed out). Here is a comparison of the output between gfortran 's backtrace and my implementation: gfortran's implemention output: ``` #0 0x557eb71f4184 in testfun2_ at /home/hunter/plct/fortran/test.f90:5 #1 0x557eb71f4165 in testfun1_ at /home/hunter/plct/fortran/test.f90:13 #2 0x557eb71f4192 in test_backtrace at /home/hunter/plct/fortran/test.f90:17 #3 0x557eb71f41ce in main at /home/hunter/plct/fortran/test.f90:18 ``` my impelmention output: ``` Backtrace: #0 ./test(_FortranABacktrace+0x32) [0x574f07efcf92] #1 ./test(testfun2_+0x14) [0x574f07efc7b4] #2 ./test(testfun1_+0xd) [0x574f07efc7cd] #3 ./test(_QQmain+0x9) [0x574f07efc7e9] #4 ./test(main+0x12) [0x574f07efc802] #5 /usr/lib/libc.so.6(+0x25e08) [0x76954694fe08] #6 /usr/lib/libc.so.6(__libc_start_main+0x8c) [0x76954694fecc] #7 ./test(_start+0x25) [0x574f07efc6c5] ``` test program is: ``` function testfun2() result(err) implicit none integer :: err err = 1 call backtrace end function testfun2 subroutine testfun1() implicit none integer :: err integer :: testfun2 err = testfun2() end subroutine testfun1 program test_backtrace call testfun1() end program test_backtrace ``` I am well aware of the importance of line numbers, so I am now working on implementing line numbers (by parsing DWARF information) and supporting cross-platform (Windows) support.

…ne symbol size as symbols are created (#117079)" This reverts commit ba668eb. Below test started failing again on x86_64 macOS CI. We're unsure if this patch is the exact cause, but since this patch has broken this test before, we speculatively revert it to see if it was indeed the root cause. ``` FAIL: lldb-shell :: Unwind/trap_frame_sym_ctx.test (1692 of 2162) ******************** TEST 'lldb-shell :: Unwind/trap_frame_sym_ctx.test' FAILED ******************** Exit Code: 1 Command Output (stderr): -- RUN: at line 7: /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/bin/clang --target=specify-a-target-or-use-a-_host-substitution --target=x86_64-apple-darwin22.6.0 -isysroot /Applications/Xcode-beta.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk -fmodules-cache-path=/Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/lldb-test-build.noindex/module-cache-clang/lldb-shell /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/Inputs/call-asm.c /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/Inputs/trap_frame_sym_ctx.s -o /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/tools/lldb/test/Shell/Unwind/Output/trap_frame_sym_ctx.test.tmp + /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/bin/clang --target=specify-a-target-or-use-a-_host-substitution --target=x86_64-apple-darwin22.6.0 -isysroot /Applications/Xcode-beta.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk -fmodules-cache-path=/Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/lldb-test-build.noindex/module-cache-clang/lldb-shell /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/Inputs/call-asm.c /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/Inputs/trap_frame_sym_ctx.s -o /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/tools/lldb/test/Shell/Unwind/Output/trap_frame_sym_ctx.test.tmp clang: warning: argument unused during compilation: '-fmodules-cache-path=/Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/lldb-test-build.noindex/module-cache-clang/lldb-shell' [-Wunused-command-line-argument] RUN: at line 8: /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/bin/lldb --no-lldbinit -S /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/tools/lldb/test/Shell/lit-lldb-init-quiet /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/tools/lldb/test/Shell/Unwind/Output/trap_frame_sym_ctx.test.tmp -s /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/trap_frame_sym_ctx.test -o exit | /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/bin/FileCheck /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/trap_frame_sym_ctx.test + /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/bin/lldb --no-lldbinit -S /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/tools/lldb/test/Shell/lit-lldb-init-quiet /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/tools/lldb/test/Shell/Unwind/Output/trap_frame_sym_ctx.test.tmp -s /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/trap_frame_sym_ctx.test -o exit + /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/bin/FileCheck /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/trap_frame_sym_ctx.test /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/trap_frame_sym_ctx.test:21:10: error: CHECK: expected string not found in input ^ <stdin>:26:64: note: scanning from here frame #1: 0x0000000100003ee9 trap_frame_sym_ctx.test.tmp`tramp ^ <stdin>:27:2: note: possible intended match here frame #2: 0x00007ff7bfeff6c0 ^ Input file: <stdin> Check file: /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/trap_frame_sym_ctx.test -dump-input=help explains the following input dump. Input was: <<<<<< . . . 21: 0x100003ed1 <+0>: pushq %rbp 22: 0x100003ed2 <+1>: movq %rsp, %rbp 23: (lldb) thread backtrace -u 24: * thread #1, queue = 'com.apple.main-thread', stop reason = breakpoint 1.1 25: * frame #0: 0x0000000100003ecc trap_frame_sym_ctx.test.tmp`bar 26: frame #1: 0x0000000100003ee9 trap_frame_sym_ctx.test.tmp`tramp check:21'0 X error: no match found 27: frame #2: 0x00007ff7bfeff6c0 check:21'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ check:21'1 ? possible intended match 28: frame #3: 0x0000000100003ec6 trap_frame_sym_ctx.test.tmp`main + 22 check:21'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 29: frame #4: 0x0000000100003ec6 trap_frame_sym_ctx.test.tmp`main + 22 check:21'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 30: frame #5: 0x00007ff8193cc41f dyld`start + 1903 check:21'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31: (lldb) exit check:21'0 ~~~~~~~~~~~~ >>>>>> ```

bader added enhancement New feature or request help wanted We don't have ability to look into this at the moment, but contributions are welcome labels Feb 19, 2019

This was referenced Apr 9, 2019

[SYCL] Clang Driver ICE when no input file found #70

Closed

[SYCL] noexcept specifier device side ICE in LLVM-SPIRV #77

Closed

peiyigu-intel mentioned this issue Mar 21, 2024

Read Image Crash in Kernel Execution with Level Zero Backend #13084

Open

wangzy0327 mentioned this issue Apr 14, 2024

Is there any documentation on address mapping to help developers use it? #13159

Open

JackAKirk pushed a commit to JackAKirk/llvm that referenced this issue Jul 1, 2024

Merge pull request intel#4 from JackAKirk/cluster-fix-aspect-tests

bd85b80

Add cluster_group aspect to .td defs.

jsji mentioned this issue Jul 3, 2024

Assertion `isValid(Attr)' for newly added RuntimeAligned.spt #14427

Closed

bader mentioned this issue Jul 22, 2024

forward_progress_kernel_param_L0_gpu.cpp fails in post-commit #14692

Open

MajidAbdelilah mentioned this issue Aug 27, 2024

Native API failed. Native API returns: -999 (Unknown PI error) -999 (Unknown PI error) #15203

Closed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[SYCL] Support building on ARM #4

[SYCL] Support building on ARM #4

kpet commented Jan 24, 2019

bader commented Jan 24, 2019

keryell commented Jul 18, 2019

[SYCL] Support building on ARM #4

[SYCL] Support building on ARM #4

Comments

kpet commented Jan 24, 2019

bader commented Jan 24, 2019

keryell commented Jul 18, 2019