Skip to content

Releases: hwfly-nx/hwfly-toolbox

Release 1.1.1

09 May 17:31
@hwflyboi hwflyboi
1.1.1
d60b10f
Compare
Choose a tag to compare
Release 1.1.1 Latest
Latest

HWFLY modchip toolbox

Changelog:
v1.1.1
Add support for x.y.z versions instead of single digit.

Instructions:

  1. place hwfly_toolbox.bin in sdcard:/bootloader/payloads
  2. run hwfly_toolbox from hekate
  3. update SD loader from menu
  4. power off switch from menu
  5. place firmware.bin and sdloader.enc from hwfly firmware into sdcard root
  6. put SD in switch and power on while holding VOL+ (verify: modchip green light stays on or begins pulsing)
  7. run hwfly_toolbox from hekate again
  8. update firmware from menu
  9. reboot while holding VOL+ again
  10. now all functions in hwfly_toolbox work upon next run

Note: toolbox requires at least firmware v0.6.0.

This will not allow unflashable chips to become flashed. Unflashable ones have a BGA FPGA IC on the board. Flashable ones use a QFN FPGA.

Assets 3
Loading

Release v1.1.0

26 Feb 01:07
@hwflyboi hwflyboi
1.1.0
2db458c
Compare
Choose a tag to compare
Release v1.1.0

HWFLY modchip toolbox

Instructions:

  1. place hwfly_toolbox.bin in sdcard:/bootloader/payloads
  2. run hwfly_toolbox from hekate
  3. update SD loader from menu
  4. power off switch from menu
  5. place firmware.bin and sdloader.enc from hwfly firmware into sdcard root
  6. put SD in switch and power on while holding VOL+ (verify: modchip green light stays on)
  7. run hwfly_toolbox from hekate again
  8. update firmware from menu
  9. reboot while holding VOL+ again
  10. now all functions in hwfly_toolbox work upon next run

Note: toolbox requires at least firmware v0.6.0.

This will not allow unflashable chips to become flashed. Unflashable ones have a BGA FPGA IC on the board. Flashable ones use a QFN FPGA.

Assets 3
Loading

Toolbox

15 Feb 01:13
@hwflyboi hwflyboi
1.0.0
e72f5e7
Compare
Choose a tag to compare
Toolbox

HWFLY modchip toolbox

Instructions:

  1. place hwfly_toolbox.bin in sdcard:/bootloader/payloads
  2. run hwfly_toolbox from hekate
  3. update SD loader from menu
  4. power off switch from menu
  5. place firmware.bin and sdloader.enc from hwfly firmware into sdcard root
  6. put SD in switch and power on while holding VOL+ (verify: modchip green light stays on)
  7. run hwfly_toolbox from hekate again
  8. update firmware from menu
  9. reboot while holding VOL+ again
  10. now all functions in hwfly_toolbox work upon next run

Note: toolbox requires at least modified spacecraft v0.5.0.

This will not allow unflashable chips to become flashed. Unflashable ones have a BGA FPGA IC on the board. Flashable ones use a QFN FPGA.

Assets 3
Loading