Skip to content

Releases: homebridge/homebridge-syno-spk

3.1.3

29 Nov 13:57
@github-actions github-actions
3.1.3
457eb09
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.
Compare
Choose a tag to compare
3.1.3 Pre-release
Pre-release

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v20 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Assets 9
Loading

3.1.2

09 Oct 13:52
@github-actions github-actions
3.1.2
457eb09
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.
Compare
Choose a tag to compare
3.1.2 Pre-release
Pre-release

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v20 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Assets 9
Loading

3.1.1

08 Jan 16:50
@github-actions github-actions
3.1.1
a0b618f
Compare
Choose a tag to compare
3.1.1 Latest
Latest

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v20 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Assets 9
Loading

3.1.0

03 Jan 14:32
@github-actions github-actions
3.1.0
6f9941c
Compare
Choose a tag to compare
3.1.0

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v20 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Assets 9
Loading

3.0.21

31 Dec 14:28
@github-actions github-actions
3.0.21
d1c2558
Compare
Choose a tag to compare
3.0.21

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v18 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Assets 9
Loading

3.0.20

22 Nov 14:01
@github-actions github-actions
3.0.20
d1c2558
Compare
Choose a tag to compare
3.0.20

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v18 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Assets 9
Loading

3.0.17

20 Jul 20:41
@github-actions github-actions
3.0.17
5f153a9
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.
Compare
Choose a tag to compare
3.0.17

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v18 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Assets 9
Loading

3.0.16

19 Jul 14:15
@github-actions github-actions
3.0.16
26c1ac7
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.
Compare
Choose a tag to compare
3.0.16

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Assets 9
Loading

3.0.15

18 Jul 12:56
@github-actions github-actions
3.0.15
2cf7256
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.
Compare
Choose a tag to compare
3.0.15

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models
  • evansport (i686) - DS214play, DS414play, DS415play
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Bundled versions

  • NodeJS v18.16.1 LTS
  • Homebridge v1.6.1
  • Homebridge-config-ui-x v4.50.4

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Assets 9
Loading

3.0.9

09 Aug 04:59
@github-actions github-actions
3.0.9
712659c
Compare
Choose a tag to compare
3.0.9

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models
  • evansport (i686) - DS214play, DS414play, DS415play
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Assets 8
Loading