home-assistant · c0ffeeca7 · Nov 19, 2023 · Nov 18, 2023 · Nov 19, 2023 · Nov 19, 2023
@@ -2,7 +2,7 @@
 title: Samsung Smart TV
 description: Instructions on how to integrate a Samsung Smart TV into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
   - Remote
 ha_release: 0.13
 ha_iot_class: Local Push

diff --git a/source/_integrations/satel_integra.markdown b/source/_integrations/satel_integra.markdown
@@ -3,7 +3,7 @@ title: Satel Integra
 description: Instructions on how to integrate a Satel Integra alarm panel with Home Assistant using an ETHM network extension from Satel.
 ha_category:
   - Alarm
-  - Binary Sensor
+  - Binary sensor
   - Hub
   - Switch
 ha_release: 0.54
@@ -20,9 +20,9 @@ The `satel_integra` integration will allow Home Assistant users who own a Satel
 
 There is currently support for the following device types within Home Assistant:
 
-- Binary Sensor: Reports on zone or output statuses
+- Binary sensor: Reports on zone or output statuses
 - Switch: allows for setting states of selected outputs 
-- Alarm Control Panel: represents the zones (in Polish: "strefa"). Reports its status, and can be used to arm/disarm the partition
+- Alarm control panel: represents the zones (in Polish: "strefa"). Reports its status, and can be used to arm/disarm the partition
 
 The module communicates via Satel's open TCP protocol published on their website. It subscribes for new events coming from alarm system and reacts to them immediately.
 
@@ -34,7 +34,7 @@ The library currently doesn't support encrypted connection to your alarm, so you
 
 A list of all partition, zone and output IDs can be acquired by running DloadX program and connecting to your alarm.
 
-For the Binary Sensor, check the [type/class](/integrations/binary_sensor/) list for a possible visualization of your zones. Note: If no zones or outputs are specified, Home Assistant will not load any binary_sensor integrations."
+For the binary sensor, check the [type/class](/integrations/binary_sensor/) list for a possible visualization of your zones. Note: If no zones or outputs are specified, Home Assistant will not load any binary_sensor integrations."
 
 ## Configuration
 

@@ -3,7 +3,7 @@ title: Pentair ScreenLogic
 description: Instructions on how to integrate a ScreenLogic gateway within Home Assistant.
 ha_release: '2021.4'
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Climate
   - Hub
   - Sensor

diff --git a/source/_integrations/sense.markdown b/source/_integrations/sense.markdown
@@ -2,7 +2,7 @@
 title: Sense
 description: Instructions on how to integrate Sense within Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Energy
   - Sensor
 ha_iot_class: Cloud Polling
@@ -22,7 +22,7 @@ Integrate your [Sense](https://sense.com) meter information into Home Assistant.
 
 There is currently support for the following device types within Home Assistant:
 
-- Binary Sensor
+- Binary sensor
 - Sensor
 
 {% include integrations/config_flow.md %}

@@ -2,7 +2,7 @@
 title: Sensibo
 description: Instructions on how to integrate Sensibo A/C controller into Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Button
   - Climate
   - Fan

@@ -2,7 +2,7 @@
 title: Sentry
 description: Record errors to Sentry.
 ha_category:
-  - System Monitor
+  - System monitor
 ha_iot_class: Cloud Polling
 ha_release: 0.104
 ha_config_flow: true

@@ -2,7 +2,7 @@
 title: Seven Segments OCR
 description: Instructions on how to use OCR for seven segments displays into Home Assistant.
 ha_category:
-  - Image Processing
+  - Image processing
 ha_release: 0.45
 og_image: /images/screenshots/ssocr.png
 ha_iot_class: Local Polling

@@ -21,7 +21,7 @@ The SFR Box integration offers integration with the **SFR** broadband router.
 
 This integration provides the following platforms:
 
-- Binary Sensors - such as ADSL status.
+- Binary sensors - such as ADSL status.
 - Buttons - such as reboot.
 - Sensors - such as ADSL line status, attenuation, noise and data rate.
 

@@ -2,7 +2,7 @@
 title: Shelly
 description: Integrate Shelly devices
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Cover
   - Energy
   - Light

diff --git a/source/_integrations/shopping_list.markdown b/source/_integrations/shopping_list.markdown
@@ -1,5 +1,5 @@
 ---
-title: Shopping List
+title: Shopping list
 description: Instructions on how to integrate a Shopping list into Home Assistant using Intent.
 ha_category:
   - Intent
@@ -16,7 +16,7 @@ ha_platforms:
 
 The `shopping_list` integration allows you to keep track of shopping list items. 
 
-Your shopping list will be accessible from the sidebar, and you can optionally add the [Shopping List card](/dashboards/shopping-list/) to your dashboard. With the [Conversation integration](/integrations/conversation/) you can add items to your shopping list using voice commands like "Add eggs to my shopping list." 
+Your shopping list will be accessible from the sidebar, and you can optionally add the [shopping list card](/dashboards/shopping-list/) to your dashboard. With the [conversation integration](/integrations/conversation/) you can add items to your shopping list using voice commands like "Add eggs to my shopping list." 
 
 {% include integrations/config_flow.md %}
 

@@ -2,7 +2,7 @@
 title: Sighthound
 description: Detect people with Sighthound Cloud.
 ha_category:
-  - Image Processing
+  - Image processing
 ha_release: 0.105
 ha_iot_class: Cloud Polling
 ha_codeowners:

@@ -26,10 +26,10 @@ The `simplisafe` integration integrates [SimpliSafe home security](https://simpl
 
 There is currently support for the following device types within Home Assistant:
 
-- **Alarm Control Panel**: reports on the current alarm status and can be used to arm and disarm the system.
-- **CO Detector**: reports on the carbon monoxide sensor status*.
-- **Entry Sensor**: reports on the current entry sensor status*.
-- **Freeze Sensor**: reports on the freeze sensor temperature*.
+- **Alarm control panel**: reports on the current alarm status and can be used to arm and disarm the system.
+- **CO detector**: reports on the carbon monoxide sensor status*.
+- **Entry sensor**: reports on the current entry sensor status*.
+- **Freeze sensor**: reports on the freeze sensor temperature*.
 - **Glass Break Sensor**: reports on the glass breakage sensor status*.
 - **Lock**: reports on `Door Locks` and can be used to lock and unlock a lock.
 - **Motion Sensor**: reports on motion detected*.

@@ -3,7 +3,7 @@ title: SIMU LiveIn2
 description: Connect and control your SIMU LiveIn2 devices using the Overkiz integration
 ha_category:
   - Alarm
-  - Binary Sensor
+  - Binary sensor
   - Button
   - Climate
   - Cover
@@ -16,7 +16,7 @@ ha_category:
   - Sensor
   - Siren
   - Switch
-  - Water Heater
+  - Water heater
 ha_domain: simu
 ha_integration_type: virtual
 ha_supporting_domain: overkiz

diff --git a/source/_integrations/sisyphus.markdown b/source/_integrations/sisyphus.markdown
@@ -4,7 +4,7 @@ description: Instructions on how to integrate your Sisyphus Kinetic Art Table wi
 ha_category:
   - Hub
   - Light
-  - Media Player
+  - Media player
 ha_release: 0.75
 ha_iot_class: Local Push
 ha_codeowners:
@@ -21,9 +21,9 @@ The [Sisyphus](https://sisyphus-industries.com/) integration for Home Assistant
 There is currently support for the following device types within Home Assistant:
 
 - **Light** - Can be used to sleep/wake the table or adjust the brightness of the table light.
-- **Media Player** - Can be used to sleep/wake the table, play/pause, move between tracks, or toggle shuffle on and off. The "volume" control adjusts the table's speed.
+- **Media player** - Can be used to sleep/wake the table, play/pause, move between tracks, or toggle shuffle on and off. The "volume" control adjusts the table's speed.
 
-The Light and Media players will be automatically added for each of your Sisyphus tables, if the Sisyphus integration is configured.
+The light and media players will be automatically added for each of your Sisyphus tables, if the Sisyphus integration is configured.
 
 There are two ways to configure this integration. For the automatic discovery of your table(s), add the following to your `configuration.yaml`:
 

diff --git a/source/_integrations/sky_hub.markdown b/source/_integrations/sky_hub.markdown
@@ -2,7 +2,7 @@
 title: Sky Hub
 description: Instructions on how to integrate Sky Hub routers into Home Assistant.
 ha_category:
-  - Presence Detection
+  - Presence detection
 ha_release: 0.37
 ha_domain: sky_hub
 ha_codeowners:

diff --git a/source/_integrations/skybell.markdown b/source/_integrations/skybell.markdown
@@ -2,7 +2,7 @@
 title: SkyBell
 description: Instructions on how to integrate your Skybell HD devices within Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Camera
   - Doorbell
   - Light
@@ -27,7 +27,7 @@ The `skybell` implementation allows you to integrate your [Skybell.com](http://w
 
 There is currently support for the following device types within Home Assistant:
 
-- [Binary Sensor](/integrations/skybell/#binary-sensor)
+- [Binary sensor](/integrations/skybell/#binary-sensor)
 - [Camera](/integrations/skybell/#camera)
 - [Light](/integrations/skybell/#light)
 - [Sensor](/integrations/skybell/#sensor)

diff --git a/source/_integrations/sleepiq.markdown b/source/_integrations/sleepiq.markdown
@@ -2,7 +2,7 @@
 title: SleepIQ
 description: Instructions for how to integrate SleepIQ beds within Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Button
   - Health
   - Light
@@ -33,7 +33,7 @@ The SleepIQ integration lets you integrate your SleepNumber Bed via [SleepIQ by
 
 There is currently support for the following platforms within Home Assistant:
 
-- Binary Sensor - View occupancy of each side
+- Binary sensor - View occupancy of each side
 - Button - Calibrate the bed
 - Button - Stop the pump
 - Light - Control lights on supported models

@@ -2,7 +2,7 @@
 title: SlimProto (Squeezebox players)
 description: Instructions on how to integrate a SlimProto-based player (e.g., Squeezebox) into Home Assistant without the need for a media server.
 ha_category:
-  - Media Player
+  - Media player
 ha_release: 2022.5
 ha_iot_class: Local Push
 ha_domain: slimproto

diff --git a/source/_integrations/smappee.markdown b/source/_integrations/smappee.markdown
@@ -2,7 +2,7 @@
 title: Smappee
 description: Instructions on how to setup Smappee within Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Energy
   - Hub
   - Sensor

@@ -8,7 +8,7 @@ ha_category:
   - Environment
   - Hub
   - Light
-  - Media Source
+  - Media source
   - Sensor
   - Switch
   - Weather

diff --git a/source/_integrations/smartthings.markdown b/source/_integrations/smartthings.markdown
@@ -3,7 +3,7 @@ title: SmartThings
 description: Instructions on setting up SmartThings within Home Assistant.
 featured: true
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Climate
   - Cover
   - Fan
@@ -124,7 +124,7 @@ Event data payloads are logged at the debug level, see [debugging](#debugging) f
 
 SmartThings represents devices as a set of [capabilities](https://developer-preview.smartthings.com/docs/devices/capabilities/capabilities) and the SmartThings integration maps those to entity platforms in Home Assistant. A single device may be represented by one or more platforms.
 
-- [Binary Sensor](#binary-sensor)
+- [Binary sensor](#binary-sensor)
 - [Climate](#climate)
 - [Cover](#cover)
 - [Fan](#fan)
@@ -136,9 +136,9 @@ SmartThings represents devices as a set of [capabilities](https://developer-prev
 
 Support for additional platforms will be added in the future.
 
-### Binary Sensor
+### Binary sensor
 
-The SmartThings Binary Sensor platform lets you view devices that have binary sensor-related capabilities. A Binary Sensor entity will be created for each attribute (below) supported by the device.
+The SmartThings binary sensor platform lets you view devices that have binary sensor-related capabilities. A binary sensor entity will be created for each attribute (below) supported by the device.
 
 | Capability                                                                                                                            | Attribute      | On-Value   |
 | ------------------------------------------------------------------------------------------------------------------------------------- | -------------- | ---------- |

diff --git a/source/_integrations/smarttub.markdown b/source/_integrations/smarttub.markdown
@@ -2,7 +2,7 @@
 title: SmartTub
 description: Instructions on how to integrate SmartTub into Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Climate
   - Light
   - Sensor

diff --git a/source/_integrations/snapcast.markdown b/source/_integrations/snapcast.markdown
@@ -2,7 +2,7 @@
 title: Snapcast
 description: Instructions on how to integrate Snapcast into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
 ha_release: 0.13
 ha_iot_class: Local Push
 ha_domain: snapcast

diff --git a/source/_integrations/snmp.markdown b/source/_integrations/snmp.markdown
@@ -3,7 +3,7 @@ title: SNMP
 description: Instructions on how to integrate SNMP into Home Assistant.
 ha_category:
   - Network
-  - Presence Detection
+  - Presence detection
   - Sensor
   - Switch
 ha_iot_class: Local Polling
@@ -20,7 +20,7 @@ A lot of Wi-Fi access points and Wi-Fi routers support the Simple Network Manage
 
 There is currently support for the following device types within Home Assistant:
 
-- [Presence Detection](#presence-detection)
+- [Presence detection](#presence-detection)
 - [Sensor](#sensor)
 - [Switch](#switch)
 

@@ -3,7 +3,7 @@ title: Somfy
 description: Connect and control your Somfy devices using the Overkiz integration
 ha_category:
   - Alarm
-  - Binary Sensor
+  - Binary sensor
   - Button
   - Climate
   - Cover
@@ -16,7 +16,7 @@ ha_category:
   - Sensor
   - Siren
   - Switch
-  - Water Heater
+  - Water heater
 ha_domain: somfy
 ha_integration_type: virtual
 ha_supporting_domain: overkiz

@@ -2,7 +2,7 @@
 title: Sony Songpal
 description: Instructions on how to integrate Sony Songpal devices into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
 ha_iot_class: Local Push
 ha_release: 0.65
 ha_config_flow: true

@@ -2,7 +2,7 @@
 title: Sonos
 description: Instructions on how to integrate Sonos devices into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
   - Sensor
 featured: true
 ha_release: 0.7.3
@@ -187,7 +187,7 @@ data:
 
 ## Services
 
-The Sonos integration makes various custom services available in addition to the [standard Media Player services](/integrations/media_player/#services).
+The Sonos integration makes various custom services available in addition to the [standard media player services](/integrations/media_player/#services).
 
 ### Service `sonos.snapshot`
 

diff --git a/source/_integrations/soundtouch.markdown b/source/_integrations/soundtouch.markdown
@@ -2,7 +2,7 @@
 title: Bose SoundTouch
 description: Instructions on how to integrate Bose SoundTouch devices into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
 ha_release: 0.34
 ha_iot_class: Local Polling
 ha_domain: soundtouch

diff --git a/source/_integrations/spc.markdown b/source/_integrations/spc.markdown
@@ -3,7 +3,7 @@ title: Vanderbilt SPC
 description: Instructions on how to setup Vanderbilt SPC devices within Home Assistant.
 ha_category:
   - Alarm
-  - Binary Sensor
+  - Binary sensor
   - Hub
 ha_release: 0.47
 ha_iot_class: Local Push
@@ -21,7 +21,7 @@ Integration with SPC is done through a third-party API gateway called [SPC Web G
 There is currently support for the following device types within Home Assistant:
 
 - [Alarm](#alarm)
-- [Binary Sensor](#binary-sensor)
+- [Binary sensor](#binary-sensor)
 
 Home Assistant needs to know where to find the SPC Web Gateway API endpoints, to configure this add the following section to your `configuration.yaml` file:
-Original file line number
+Diff line change
@@ Expand Up / @@ -8,7 +8,7 @@ ha_category: @@
       - Environment
       - Hub
       - Light
-      - Media Source
+      - Media source
       - Sensor
       - Switch
       - Weather
@@ Expand Down @@