p-r integrations: apply sentence-style caps to categories

source/_integrations/panasonic_bluray.markdown

@@ -2,7 +2,7 @@
 title: Panasonic Blu-Ray Player
 description: Instructions on how to integrate a Panasonic Blu-Ray player into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
 ha_iot_class: Local Polling
 ha_release: 0.83
 ha_domain: panasonic_bluray

source/_integrations/panasonic_viera.markdown

@@ -2,7 +2,7 @@
 title: Panasonic Viera
 description: Instructions on how to integrate a Panasonic Viera TV with Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
   - Remote
 ha_release: 0.17
 ha_iot_class: Local Polling
@@ -18,7 +18,7 @@ The Panasonic Viera integration allows you to control a Panasonic Viera TV.
 
 There is currently support for the following device types within Home Assistant:
 
-- Media Player
+- Media player
 - [Remote](#remote)
 
 {% include integrations/config_flow.md %}

source/_integrations/pandora.markdown

@@ -2,7 +2,7 @@
 title: Pandora
 description: Instructions on how to integrate Pandora radio into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
 ha_release: 0.22
 ha_iot_class: Local Polling
 ha_domain: pandora

source/_integrations/person.markdown

@@ -2,7 +2,7 @@
 title: Person
 description: Instructions on how to set up people tracking within Home Assistant.
 ha_category:
-  - Presence Detection
+  - Presence detection
 ha_release: 0.88
 ha_quality_scale: internal
 ha_domain: person

source/_integrations/philips_js.markdown

@@ -3,7 +3,7 @@ title: Philips TV
 description: Instructions on how to add Philips TVs to Home Assistant.
 ha_category:
   - Light
-  - Media Player
+  - Media player
   - Remote
 ha_iot_class: Local Polling
 ha_release: 0.34

source/_integrations/pi_hole.markdown

@@ -4,7 +4,7 @@ description: Instructions on how to integrate Pi-hole with Home Assistant.
 ha_category:
   - Sensor
   - Switch
-  - System Monitor
+  - System monitor
   - Update
 ha_iot_class: Local Polling
 ha_config_flow: true

source/_integrations/pilight.markdown

@@ -2,7 +2,7 @@
 title: Pilight
 description: Instructions on how to setup Pilight within Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - DIY
   - Sensor
   - Switch
@@ -27,7 +27,7 @@ The received and supported RF codes are put on the event bus of Home Assistant a
 
 There is currently support for the following device types within Home Assistant:
 
-- [Binary Sensor](#binary-sensor)
+- [Binary sensor](#binary-sensor)
 - [Sensor](#sensor)
 - [Switch](#switch)
 - [Light](#light)

source/_integrations/ping.markdown

@@ -2,9 +2,9 @@
 title: Ping (ICMP)
 description: Instructions on how to integrate Ping (ICMP)-based into Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Network
-  - Presence Detection
+  - Presence detection
 ha_release: 0.43
 ha_iot_class: Local Polling
 ha_quality_scale: internal
@@ -19,8 +19,8 @@ ha_codeowners:
 
 There is currently support for the following device types within Home Assistant:
 
-- [Binary Sensor](#binary-sensor)
-- [Presence Detection](#presence-detection)
+- [Binary sensor](#binary-sensor)
+- [Presence detection](#presence-detection)
 
 ## Binary sensor
 

source/_integrations/pioneer.markdown

@@ -2,7 +2,7 @@
 title: Pioneer
 description: Instructions on how to integrate a Pioneer Network Receivers into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
 ha_release: 0.19
 ha_iot_class: Local Polling
 ha_domain: pioneer

source/_integrations/pjlink.markdown

@@ -2,7 +2,7 @@
 title: PJLink
 description: Instructions on how to integrate PJLink enabled projectors into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
 ha_release: 0.76
 ha_iot_class: Local Polling
 ha_domain: pjlink

source/_integrations/plex.markdown

@@ -3,7 +3,7 @@ title: Plex Media Server
 description: Instructions on how to integrate Plex into Home Assistant.
 ha_category:
   - Button
-  - Media Player
+  - Media player
   - Sensor
   - Update
 featured: true
@@ -22,16 +22,16 @@ ha_zeroconf: true
 ha_integration_type: integration
 ---
 
-The Plex integration allows you to connect Home Assistant to a [Plex Media Server](https://plex.tv). Once configured, actively streaming [Plex Clients](https://www.plex.tv/apps-devices/) show up as [Media Players](/integrations/media_player/) and report playback status and library sizes via [Sensors](/integrations/sensor/) in Home Assistant. Media Players will allow you to control media playback and see the current playing item.
+The Plex integration allows you to connect Home Assistant to a [Plex Media Server](https://plex.tv). Once configured, actively streaming [Plex Clients](https://www.plex.tv/apps-devices/) show up as [media players](/integrations/media_player/) and report playback status and library sizes via [sensors](/integrations/sensor/) in Home Assistant. Media players will allow you to control media playback and see the current playing item.
 
-Support for playing music directly on linked [Sonos](/integrations/sonos/) speakers is available [here](#sonos-playback).
+Support for playing music directly on linked [Sonos](/integrations/sonos/) speakers is available in the [Sonos playback](#sonos-playback) section.
 
 There is currently support for the following device types within Home Assistant:
 
 - [Sensor](#sensor)
 - [Button](#button)
 - [Update](#update)
-- [Media Player](#media-player)
+- [Media player](#media-player)
 
 If a Plex server has been claimed by a Plex account via the [claim interface](https://plex.tv/claim), Home Assistant will require authentication to connect.
 
@@ -148,9 +148,9 @@ Automatic upgrades of Plex Media Server can be triggered for some installation t
 
 ## Media player
 
-The Plex media player platform will create Media Player entities for each connected client device. These entities will display media information, playback progress, and playback controls (if supported by the streaming device).
+The Plex media player platform will create media player entities for each connected client device. These entities will display media information, playback progress, and playback controls (if supported by the streaming device).
 
-By default, the Plex integration will create Media Player entities for all local, managed, and shared users on the Plex server. To customize which users or client types to monitor, adjust the "*Monitored users*", "*Ignore new managed/shared users*", and "*Ignore Plex Web clients*" options described under [Integration Options](#integration-options).
+By default, the Plex integration will create media player entities for all local, managed, and shared users on the Plex server. To customize which users or client types to monitor, adjust the "*Monitored users*", "*Ignore new managed/shared users*", and "*Ignore Plex Web clients*" options described under [Integration Options](#integration-options).
 
 ### Service `media_player.play_media`
 

source/_integrations/plugwise.markdown

@@ -2,7 +2,7 @@
 title: Plugwise
 description: Plugwise Smile platform integration.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Climate
   - Number
   - Select

source/_integrations/point.markdown

@@ -3,7 +3,7 @@ title: Minut Point
 description: Instructions on how to integrate Minut Point into Home Assistant.
 ha_category:
   - Alarm
-  - Binary Sensor
+  - Binary sensor
   - Hub
   - Sensor
 ha_release: 0.83
@@ -27,7 +27,7 @@ Once Home Assistant is started, a configurator will pop up asking you to Authent
 There is currently support for the following device types within Home Assistant:
 
 - [Alarm](#alarm)
-- [Binary Sensor](#binary-sensor)
+- [Binary sensor](#binary-sensor)
 - [Sensor](#sensor)
 
 ### Configuration
@@ -54,12 +54,12 @@ client_secret:
 
 The integration supports the following device types within Home Assistant:
   - [Alarm](#alarm)
-  - [Binary Sensor](#binary-sensor)
+  - [Binary sensor](#binary-sensor)
   - [Sensor](#sensor)
 
 <div class='note'>
 
-The Point is just active occasionally so the [Sensors](#sensor) are only updated every hour or so. The [Binary Sensors](#binary-sensor) are however updated via [Cloud Push](/blog/2016/02/12/classifying-the-internet-of-things/#cloud-pushing-new-state), making the changes close to instant.
+The Point is just active occasionally so the [Sensors](#sensor) are only updated every hour or so. The [Binary sensors](#binary-sensor) are however updated via [Cloud Push](/blog/2016/02/12/classifying-the-internet-of-things/#cloud-pushing-new-state), making the changes close to instant.
 
 </div>
 

source/_integrations/powerwall.markdown

@@ -2,7 +2,7 @@
 title: Tesla Powerwall
 description: Instructions on how to integrate Tesla Power Walls into Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Energy
   - Sensor
   - Switch
@@ -26,7 +26,7 @@ The `powerwall` integration allows you to integrate your [Tesla Powerwall](https
 
 There is currently support for the following device types within Home Assistant:
 
-- [Binary Sensor](#binary-sensor)
+- [Binary sensor](#binary-sensor)
 - [Sensor](#sensor)
 - [Switch](#switch)
 

source/_integrations/private_ble_device.markdown

@@ -2,7 +2,7 @@
 title: Private BLE Device
 description: Instructions on how to integrate private BLE devices into Home Assistant.
 ha_category:
-  - Device Tracker
+  - Device tracker
 ha_release: '2023.10'
 ha_iot_class: Local Push
 ha_domain: private_ble_device

source/_integrations/progettihwsw.markdown

@@ -2,7 +2,7 @@
 title: ProgettiHWSW Automation
 description: Instructions on how to integrate the ProgettiHWSW remote relay boards into Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - DIY
   - Switch
 ha_release: 0.115

source/_integrations/proximity.markdown

@@ -3,7 +3,7 @@ title: Proximity
 description: Instructions on how to setup Proximity monitoring within Home Assistant.
 ha_category:
   - Automation
-  - Presence Detection
+  - Presence detection
 ha_release: 0.13
 ha_quality_scale: internal
 ha_domain: proximity

source/_integrations/proxmoxve.markdown

@@ -2,7 +2,7 @@
 title: Proxmox VE
 description: Access your ProxmoxVE instance in Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
 ha_release: 0.103
 ha_iot_class: Local Polling
 ha_codeowners:
@@ -103,7 +103,7 @@ proxmoxve:
           - VM_ID_2
 ```
 
-## Binary Sensor
+## Binary sensor
 
 The integration will automatically create a binary sensor for each tracked virtual machine or container. The binary sensor will either be on if the VM's state is running or off if the VM's state is different.
 

source/_integrations/ps4.markdown

@@ -2,7 +2,7 @@
 title: Sony PlayStation 4
 description: Instructions on how to integrate a Sony PlayStation 4 into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
 ha_release: 0.89
 ha_config_flow: true
 ha_iot_class: Local Polling

source/_integrations/qingping.markdown

@@ -2,7 +2,7 @@
 title: Qingping
 description: Instructions on how to integrate Qingping devices into Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Sensor
 ha_bluetooth: true
 ha_release: 2022.9

source/_integrations/qnap.markdown

@@ -2,7 +2,7 @@
 title: QNAP
 description: Instructions on how to integrate the QNAP sensor within Home Assistant.
 ha_category:
-  - System Monitor
+  - System monitor
 ha_release: 0.38
 ha_iot_class: Local Polling
 ha_domain: qnap

source/_integrations/qnap_qsw.markdown

@@ -3,7 +3,7 @@ title: QNAP QSW
 description: Instructions on how to integrate QNAP QSW within Home Assistant.
 ha_release: 2022.5
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Button
   - Sensor
   - Update
@@ -39,13 +39,13 @@ Password:
 
 The following *binary sensors* are created:
 
-| Binary Sensor       | Description                        |
+| Binary sensor       | Description                        |
 | :------------------ | :--------------------------------- |
 | anomaly             | Device anomaly.                    |
 
 The following *binary sensors* are created for each port (or LACP):
 
-| Binary Sensor       | Description                        |
+| Binary sensor       | Description                        |
 | :------------------ | :--------------------------------- |
 | link                | Link status.                       |
 

source/_integrations/qrcode.markdown

@@ -2,7 +2,7 @@
 title: QR Code
 description: Instructions on how to integrate QR Code Recognition into Home Assistant.
 ha_category:
-  - Image Processing
+  - Image processing
 ha_iot_class: Calculated
 ha_release: 0.87
 ha_domain: qrcode

source/_integrations/quadrafire.markdown

@@ -2,7 +2,7 @@
 title: Quadra-Fire
 description: Connect and control your Quadra-Fire devices using the IntelliFire integration
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Climate
   - Fan
   - Light

source/_integrations/quantum_gateway.markdown

@@ -2,7 +2,7 @@
 title: Quantum Gateway
 description: Instructions on how to integrate Quantum Gateways into Home Assistant.
 ha_category:
-  - Presence Detection
+  - Presence detection
 ha_iot_class: Local Polling
 ha_release: 0.81
 ha_codeowners:

source/_integrations/qwikswitch.markdown

@@ -2,7 +2,7 @@
 title: QwikSwitch QSUSB
 description: Instructions on how to integrate the QwikSwitch QSUSB Hub into Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Hub
   - Light
   - Sensor
@@ -24,7 +24,7 @@ The `qwikswitch` integration is the main integration to integrate various [QwikS
 
 There is currently support for the following device types within Home Assistant:
 
-- Binary Sensor
+- Binary sensor
 - Light
 - [Sensor](#qwikswitch-sensors)
 - [Switch](#switch)

source/_integrations/rachio.markdown

@@ -2,7 +2,7 @@
 title: Rachio
 description: Instructions on how to use Rachio with Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Irrigation
   - Switch
 ha_iot_class: Cloud Push
@@ -24,7 +24,7 @@ The `rachio` platform allows you to control your [Rachio irrigation system](http
 
 There is currently support for the following device types within Home Assistant:
 
-- **Binary Sensor** - Allows you to view the status of your [Rachio irrigation system](https://rachio.com/).
+- **Binary sensor** - Allows you to view the status of your [Rachio irrigation system](https://rachio.com/).
 - [**Switch**](#switch)
 
 They will be automatically added if the Rachio integration is loaded.

source/_integrations/radio_browser.markdown

@@ -2,7 +2,7 @@
 title: Radio Browser
 description: Instructions on how to integrate Radio Browser into Home Assistant.
 ha_category:
-  - Media Source
+  - Media source
   - Multimedia
 ha_release: 2022.3
 ha_iot_class: Cloud Polling