-
Notifications
You must be signed in to change notification settings - Fork 293
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
XP-Pen Star G640 not being recognized #602
Comments
I have the same problem... |
Same problem here, might be similar to the g430s_B where the new versions wouldn't work. |
Hi, after poking around for 3 hours I finally got it to work. Head to the config folder, edit the tablet.cfg with notepad or anything similar and paste this XP-Pen G640HIDTablet 0x28BD 0x0914 0xFF0A 0x0001 or just replace the tablet.cfg file with this, remember to change the txt file into cfg. |
Thanks! It works now |
I take that back, it detects the tablet but the cursor does not move. |
Try reinstalling the vmulti drivers, it should work, make sure you uninstall xp-pen's drivers as well |
Thanks it works now |
omggggggggggggggg thanks soooooooooooooo much |
No problem, do let me know if there is any latency though, not sure if its my tablet or just me |
@HongClarence It doesn't work for me (or my friend) though, I tried to apply your fix but it still says "Driver stopped. Restarting! Check console. 2020-04-21 00:57:42 [INFO] >> Name "Wacom CTH-461" |
Did you save the tablet.cfg file before trying? If you did and it still isn't working, try replacing the file with the on i posted |
Yes, I did everything and yes, I saved your file ofc. I am not dumb but
it's still not working unfortunately:/
HongClarence <[email protected]> schrieb am Di., 21. Apr. 2020,
04:27:
… Did you save the tablet.cfg file before trying? If you did and it still
isn't working, try replacing the file with the on i posted
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#602 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AOKV35CWRSVHFOOITXH756LRNT77PANCNFSM4LJNGC6A>
.
|
Hm, I am unable to see what's the problem. It just seems that your tablet isn't being detected even though all the id matches. Have you tried just uninstalling everything and redownloading all the files again? |
Yes, yes I did. Even uninstall vmulti and install vmulti several times,
deleted the driver files and then extracted them again and replaced the cfg
file with your one.
HongClarence <[email protected]> schrieb am Di., 21. Apr. 2020,
13:11:
… Hm, I am unable to see what's the problem. It just seems that your tablet
isn't being detected even though all the id matches. Have you tried just
uninstalling everything and redownloading all the files again?
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#602 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AOKV35B3Z4UDKCWZZKNAPC3RNV5MPANCNFSM4LJNGC6A>
.
|
Does your tablet work with the default driver by xp-pen? Sorry for the dumb questions just want to make sure that i get as much info as possible to help u |
Yea sure I know you don't mean it bad.
Um yes it does work with the xp pen drivers and I uninstalled them all. The
tablet is getting recognized as 6 inch PenTablet.
HongClarence <[email protected]> schrieb am Di., 21. Apr. 2020,
13:18:
… Does your tablet work with the default driver by xp-pen? Sorry for the
dumb questions just want to make sure that i get as much info as possible
to help u
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#602 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AOKV35FJXIVKLQNMQ5IJ2LLRNV6JJANCNFSM4LJNGC6A>
.
|
Did you install the hardware update for the tablet? The one from xp-pen |
you mean Firmware update? I can try that
HongClarence <[email protected]> schrieb am Di., 21. Apr. 2020,
13:33:
… Did you install the hardware update for the tablet? The one from xp-pen
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#602 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AOKV35BS33S2GJGKWNTNTLLRNV77TANCNFSM4LJNGC6A>
.
|
Yup firmware update |
HongClarence Your a fucking G dawg, thanks so much, i tried getting it to work for no joke 10 hours |
Did. But still the same result, not being recognized.
HongClarence <[email protected]> schrieb am Di., 21. Apr. 2020,
13:50:
… Yup firmware update
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#602 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AOKV35CMACL6JTQQQJZ65ZTRNWCB5ANCNFSM4LJNGC6A>
.
|
Hi @Hexishu , sadly i am running out of ideas of what the problem might be since it works for others. I do notice a difference between our console debug, specifically this part. |
Yes, from amazon.(speaking for a friend tho he has the tablet)
HongClarence <[email protected]> schrieb am Do., 23. Apr. 2020,
18:00:
… Hi @Hexishu <https://github.com/Hexishu> , sadly i am running out of
ideas of what the problem might be since it works for others. I do notice a
difference between our console debug, specifically this part.
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: 'UGTABLET'
Product: '6 inch PenTablet'
Yours seems to lack a serial number as compared to mine,
[2020-04-23 23:58:37.478] [DEBUG] [HIDDevice] HID Device: Vendor:
'UGTABLET' Product: '6 inch PenTablet', Serial: '000000'
Did you get the tablet from the official xp-pen seller?
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<#602 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AOKV35H4MXCC56646K2ITV3ROBQ2BANCNFSM4LJNGC6A>
.
|
The only other solution that i can think of is to contact the xp-pen customer support and tell them about the missing serial number, thought i doubt they will actually help since this driver is not by them |
Thank you so much it finally works! |
thank you man |
@hawku @InfinityGhost @AbdShullah You should add this revision to your latest driver builds, can confirm that a friend of mine bought a new tablet off amazon and got this model of it, requiring the config above. |
afaik @AbdShullah already has added the revision to his repo, I haven't done anything because I'm no longer developing my fork in favor of my own project. |
Hello! Thank you for your config changes, it has allowed me to use my tablet (G640) for osu! but, I have one problem, I'm getting cursor lag whenever I use this config with the hawku drivers. (I've tried everything, reinstalling drivers, tweaking settings like FPS and resolution in osu! etc,) The lag only occurs when I move my cursor slowly (like a small jump or spinner) my cursor would randomly jump and freeze making it extremely hard for me to do small jump sections on maps or do spinners, however I can do big jumps accurately. I have used my tablet with the XP-Pen Official drivers and it worked fine. (aside from it being Official drivers, my cursor would sway, but i could still somewhat play and there was no cursor lag) The closest fix I've had to this problem is experimenting with the smoothing filter, it has somewhat stopped the cursor lag but it feels too slow and clunky and it's not a 100% fix either, also, this problem isn't specifically an osu! problem (lag still occurs even if I'm not tabbed into osu!) I can provide screenshots and recordings if need be, I have searched around the internet and couldn't find an accurate fix to my problem, it seems that I'm the only person with this problem as reviews on the tablet have not mentioned this problem. It's most annoying as I have previously used the Huion 420 with the hawku drivers and I had no cursor lag and gameplay felt perfect (switched for a bigger tablet with a better pen) I'm not sure if area size or anything like that matters but I've attached what I'm using now to play osu! (Area size, Smoothing filter settings, etc) I'd really appreciate it if you could help as this is making me pretty annoyed. |
Okay, so I've found what the problem is. I experimented with changing my area size and presto! The glitching stopped, so I've switched from 7cm to 10cm and after getting used to it, I got some good plays. Apologies if I wasted any ones time. |
Thank you so much!!! |
Thank you so much, i tried everything and it doesn't work, but after this my tablet with connected! |
you may have fixed it by now but if you didn't heres the line that fixed mine XP-Pen G640sTablet 0x28BD 0x0906 0xFF0A 0x0001 What's different is that I removed HID from HIDTablet and it fixed it for some reason |
I'll try that for my friend ty in advance |
Hello, i have a problem with my XP-Pen G640. |
Hi guys, I know im kinda late with this issue but I've tried the debugs you guys have suggested but it just isn't working for me. Anyone can provide any help? |
Hi everyone!
I'm trying to install this driver since reddit told me it has less input lag but i cant make the TabletDriverGUI recognize my tablet, it always says in the console "tablet not found!".
First i tried uninstalling all XP-Pen drivers, rebooting PC, installing hawku drivers through "install_vmulti_driver.bat" and open TabletDriverGUI. Not working.
Then, after running "remove_vmulti_driver.bat", i tried the "install_vmulti_64.bat" inside the "driver_vmulti" folder, still not working.
Then i tried with XP-Pen drivers, both "normal" and "osu" drivers, still not working, even if i end "Pentable Service" process in the Task Manager. Everything i tried i get "tablet not found!"
It is not a issue with my tablet since it works fine with official XP-Pen drivers and the official app "PenTablet" from them, so i don't know what it could be.
Maybe i have a new revision of the G640?
Hardware/software information
Windows Version: 1909
Tablet Driver version: 0.2.3
Tablet model: XP-Pen Star G640
The text was updated successfully, but these errors were encountered: