Add in isr to hcd int hanlder

.github/workflows/build_arm.yml

@@ -36,7 +36,7 @@ jobs:
         - 'broadcom_32bit'
         - 'kinetis_k32l2'
         - 'lpc11 lpc13 lpc15 lpc17'
-        - 'lpc51 lpc54'
+        - 'lpc51'
         - 'mm32 msp432e4'
         - 'samd11 same5x saml2x'
         - 'stm32f2 stm32f3'

.github/workflows/cmake_arm.yml

@@ -36,7 +36,7 @@ jobs:
           - 'imxrt'
           - 'kinetis_kl'
           - 'lpc18 lpc40 lpc43'
-          - 'lpc55'
+          - 'lpc54 lpc55'
           - 'mcx'
           - 'nrf'
           - 'ra'

examples/host/bare_api/only.txt

@@ -1,3 +1,4 @@
+mcu:KINETIS_KL
 mcu:LPC175X_6X
 mcu:LPC177X_8X
 mcu:LPC18XX

examples/host/cdc_msc_hid/only.txt

@@ -1,3 +1,4 @@
+mcu:KINETIS_KL
 mcu:LPC175X_6X
 mcu:LPC177X_8X
 mcu:LPC18XX

examples/host/hid_controller/only.txt

@@ -1,3 +1,4 @@
+mcu:KINETIS_KL
 mcu:LPC175X_6X
 mcu:LPC177X_8X
 mcu:LPC18XX

examples/host/msc_file_explorer/only.txt

@@ -1,3 +1,4 @@
+mcu:KINETIS_KL
 mcu:LPC175X_6X
 mcu:LPC177X_8X
 mcu:LPC18XX

hw/bsp/family_support.cmake

@@ -40,6 +40,7 @@ if (NOT FAMILY STREQUAL rp2040)
   # enable LTO if supported skip rp2040
   include(CheckIPOSupported)
   check_ipo_supported(RESULT IPO_SUPPORTED)
+  cmake_print_variables(IPO_SUPPORTED)
   if (IPO_SUPPORTED)
     set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
   endif()

hw/bsp/imxrt/family.c

@@ -188,7 +188,7 @@ void USB_OTG1_IRQHandler(void)
   #endif
 
   #if PORT_SUPPORT_HOST(0)
-    tuh_int_handler(0);
+    tuh_int_handler(0, true);
   #endif
 }
 
@@ -199,7 +199,7 @@ void USB_OTG2_IRQHandler(void)
   #endif
 
   #if PORT_SUPPORT_HOST(1)
-    tuh_int_handler(1);
+    tuh_int_handler(1, true);
   #endif
 }
 

hw/bsp/kinetis_kl/family.c

@@ -39,7 +39,7 @@
 void USB0_IRQHandler(void)
 {
 #if CFG_TUH_ENABLED
-  tuh_int_handler(0);
+  tuh_int_handler(0, true);
 #endif
 #if CFG_TUD_ENABLED
   tud_int_handler(0);

hw/bsp/kinetis_kl/family.cmake

@@ -22,48 +22,47 @@ set(FAMILY_MCUS KINETIS_KL CACHE INTERNAL "")
 #------------------------------------
 # only need to be built ONCE for all examples
 function(add_board_target BOARD_TARGET)
-  if (NOT TARGET ${BOARD_TARGET})
-    add_library(${BOARD_TARGET} STATIC
-      ${SDK_DIR}/drivers/gpio/fsl_gpio.c
-      ${SDK_DIR}/drivers/lpsci/fsl_lpsci.c
-      ${SDK_DIR}/drivers/uart/fsl_uart.c
-      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c
-      ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c
-      )
-    target_compile_definitions(${BOARD_TARGET} PUBLIC
-      )
-    target_include_directories(${BOARD_TARGET} PUBLIC
-      ${CMSIS_DIR}/CMSIS/Core/Include
-      ${SDK_DIR}/devices/${MCU_VARIANT}
-      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers
-      ${SDK_DIR}/drivers/common
-      ${SDK_DIR}/drivers/gpio
-      ${SDK_DIR}/drivers/lpsci
-      ${SDK_DIR}/drivers/port
-      ${SDK_DIR}/drivers/smc
-      ${SDK_DIR}/drivers/uart
-      )
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif ()
 
-    update_board(${BOARD_TARGET})
+  add_library(${BOARD_TARGET} STATIC
+    ${SDK_DIR}/drivers/gpio/fsl_gpio.c
+    ${SDK_DIR}/drivers/lpsci/fsl_lpsci.c
+    ${SDK_DIR}/drivers/uart/fsl_uart.c
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c
+    ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c
+    )
+  target_compile_definitions(${BOARD_TARGET} PUBLIC
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${CMSIS_DIR}/CMSIS/Core/Include
+    ${SDK_DIR}/devices/${MCU_VARIANT}
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers
+    ${SDK_DIR}/drivers/common
+    ${SDK_DIR}/drivers/gpio
+    ${SDK_DIR}/drivers/lpsci
+    ${SDK_DIR}/drivers/port
+    ${SDK_DIR}/drivers/smc
+    ${SDK_DIR}/drivers/uart
+    )
+  update_board(${BOARD_TARGET})
 
-    # LD_FILE and STARTUP_FILE can be defined in board.cmake
+  # LD_FILE and STARTUP_FILE can be defined in board.cmake
+  target_sources(${BOARD_TARGET} PUBLIC
+    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+    )
 
-    target_sources(${BOARD_TARGET} PUBLIC
-      ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      # nanolib
+      --specs=nosys.specs --specs=nano.specs
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
       )
-
-    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
-      target_link_options(${BOARD_TARGET} PUBLIC
-        "LINKER:--script=${LD_FILE_GNU}"
-        # nanolib
-        --specs=nosys.specs
-        --specs=nano.specs
-        )
-    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
-      target_link_options(${BOARD_TARGET} PUBLIC
-        "LINKER:--config=${LD_FILE_IAR}"
-        )
-    endif ()
   endif ()
 endfunction()
 

hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c

@@ -37,7 +37,7 @@ void USB_IRQHandler(void)
   #endif
 
   #if CFG_TUH_ENABLED
-    tuh_int_handler(0);
+    tuh_int_handler(0, true);
   #endif
 }
 

hw/bsp/lpc17/boards/mbed1768/mbed1768.c

@@ -151,7 +151,7 @@ void USB_IRQHandler(void)
   #endif
 
   #if CFG_TUH_ENABLED
-    tuh_int_handler(0);
+    tuh_int_handler(0, true);
   #endif
 }
 

hw/bsp/lpc18/family.c

@@ -43,25 +43,23 @@
 //--------------------------------------------------------------------+
 // USB Interrupt Handler
 //--------------------------------------------------------------------+
-void USB0_IRQHandler(void)
-{
+void USB0_IRQHandler(void) {
   #if PORT_SUPPORT_DEVICE(0)
-    tud_int_handler(0);
+  tud_int_handler(0);
   #endif
 
   #if PORT_SUPPORT_HOST(0)
-    tuh_int_handler(0);
+  tuh_int_handler(0, true);
   #endif
 }
 
-void USB1_IRQHandler(void)
-{
+void USB1_IRQHandler(void) {
   #if PORT_SUPPORT_DEVICE(1)
-    tud_int_handler(1);
+  tud_int_handler(1);
   #endif
 
   #if PORT_SUPPORT_HOST(1)
-    tuh_int_handler(1);
+  tuh_int_handler(1, true);
   #endif
 }
 
@@ -74,28 +72,26 @@ const uint32_t OscRateIn = 12000000;
 const uint32_t ExtRateIn = 0;
 
 // Invoked by startup code
-void SystemInit(void)
-{
+void SystemInit(void) {
 #ifdef __USE_LPCOPEN
-	extern void (* const g_pfnVectors[])(void);
+  extern void (*const g_pfnVectors[])(void);
   unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08;
-	*pSCB_VTOR = (unsigned int) g_pfnVectors;
+  *pSCB_VTOR = (unsigned int) g_pfnVectors;
 #endif
 
   board_lpc18_pinmux();
 
-  #ifdef TRACE_ETM
+#ifdef TRACE_ETM
   // Trace clock is limited to 60MHz, limit CPU clock to 120MHz
   Chip_SetupCoreClock(CLKIN_CRYSTAL, 120000000UL, true);
-  #else
+#else
   // CPU clock max to 180 Mhz
   Chip_SetupCoreClock(CLKIN_CRYSTAL, MAX_CLOCK_FREQ, true);
-  #endif
+#endif
 
 }
 
-void board_init(void)
-{
+void board_init(void) {
   SystemCoreClockUpdate();
 
 #if CFG_TUSB_OS == OPT_OS_NONE
@@ -135,27 +131,22 @@ void board_init(void)
 // Board porting API
 //--------------------------------------------------------------------+
 
-void board_led_write(bool state)
-{
+void board_led_write(bool state) {
   Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state);
 }
 
-uint32_t board_button_read(void)
-{
+uint32_t board_button_read(void) {
   // active low
   return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1;
 }
 
-int board_uart_read(uint8_t* buf, int len)
-{
+int board_uart_read(uint8_t *buf, int len) {
   return Chip_UART_Read(UART_DEV, buf, len);
 }
 
-int board_uart_write(void const * buf, int len)
-{
-  uint8_t const* buf8 = (uint8_t const*) buf;
-  for(int i=0; i<len; i++)
-  {
+int board_uart_write(void const *buf, int len) {
+  uint8_t const *buf8 = (uint8_t const *) buf;
+  for (int i = 0; i < len; i++) {
     while ((Chip_UART_ReadLineStatus(UART_DEV) & UART_LSR_THRE) == 0) {}
     Chip_UART_SendByte(UART_DEV, buf8[i]);
   }
@@ -165,13 +156,13 @@ int board_uart_write(void const * buf, int len)
 
 #if CFG_TUSB_OS == OPT_OS_NONE
 volatile uint32_t system_ticks = 0;
-void SysTick_Handler (void)
-{
+
+void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void)
-{
+uint32_t board_millis(void) {
   return system_ticks;
 }
+
 #endif

hw/bsp/lpc40/family.c

@@ -37,7 +37,7 @@ void USB_IRQHandler(void) {
   #endif
 
   #if CFG_TUH_ENABLED
-  tuh_int_handler(0);
+  tuh_int_handler(0, true);
   #endif
 }
 

hw/bsp/lpc43/family.c

@@ -213,7 +213,7 @@ void USB0_IRQHandler(void)
   #endif
 
   #if PORT_SUPPORT_HOST(0)
-    tuh_int_handler(0);
+    tuh_int_handler(0, true);
   #endif
 }
 
@@ -224,7 +224,7 @@ void USB1_IRQHandler(void)
   #endif
 
   #if PORT_SUPPORT_HOST(1)
-    tuh_int_handler(1);
+    tuh_int_handler(1, true);
   #endif
 }