Prepare for 0.9.2-rc1

website/source/api/allocations.html.md

@@ -568,7 +568,7 @@ $ curl \
 
         Depending on the type the event will have applicable annotations.
 
-## Stop Allocation
+## Stop Allocation <sup>0.9.2</sup>
 
 This endpoint stops and reschedules a specific allocation.
 
@@ -606,7 +606,7 @@ $ curl -X POST \
 }
 ```
 
-## Signal Allocation
+## Signal Allocation <sup>0.9.2</sup>
 
 This endpoint sends a signal to an allocation or task.
 

website/source/api/jobs.html.md

@@ -966,7 +966,7 @@ The table below shows this endpoint's support for
 - `:job_id` `(string: <required>)` - Specifies the ID of the job (as specified in
   the job file during submission). This is specified as part of the path.
 
-- `all` `(bool: false)` - Specifies whether the list of deployments should
+- `all` <sup>0.9.2</sup> `(bool: false)` - Specifies whether the list of deployments should
   include deployments from a previously registered job with the same ID. This is
   possible if the job is deregistered and reregistered.
 
@@ -1299,7 +1299,7 @@ The table below shows this endpoint's support for
   job's version. This is checked and acts as a check-and-set value before
   reverting to the specified job.
 
-- `VaultToken` `(string: "")` - Optional value specifying the [vault token](/docs/commands/job/revert.html)
+- `VaultToken`<sup>0.9.2</sup> `(string: "")` - Optional value specifying the [vault token](/docs/commands/job/revert.html)
   used for Vault [policy authentication checking](/docs/configuration/vault.html#allow_unauthenticated).
 
 ### Sample Payload

website/source/api/json-jobs.html.md

@@ -691,7 +691,7 @@ determined. The potential values are:
   they can be promoted which unblocks a rolling update of the remaining
   allocations at a rate of `max_parallel`.
 
-- `AutoPromote` - Specifies if the job should automatically promote to
+- `AutoPromote` <sup>0.9.2</sup> - Specifies if the job should automatically promote to
   the new deployment if all canaries become healthy.
 
 - `Stagger` - Specifies the delay between migrating allocations off nodes marked

website/source/api/operator.html.md

@@ -381,9 +381,9 @@ $ curl \
   - `PreemptionConfig` `(PreemptionConfig)` - Options to enable preemption for various schedulers.
          - `SystemSchedulerEnabled` `(bool: true)` - Specifies whether preemption for system jobs is enabled. Note that
          this defaults to true.
-         - `BatchSchedulerEnabled` `(bool: true)` (Enterprise Only) - Specifies whether preemption for batch jobs is enabled. Note that
+         - `BatchSchedulerEnabled` <sup>0.9.2</sup> `(bool: true)` (Enterprise Only) - Specifies whether preemption for batch jobs is enabled. Note that
          this defaults to true.
-         - `ServiceSchedulerEnabled` `(bool: true)` (Enterprise Only) - Specifies whether preemption for service jobs is enabled. Note that
+         - `ServiceSchedulerEnabled` <sup>0.9.2</sup> `(bool: true)` (Enterprise Only) - Specifies whether preemption for service jobs is enabled. Note that
          this defaults to true.
   - `CreateIndex` - The Raft index at which the config was created.
   - `ModifyIndex` - The Raft index at which the config was modified.
@@ -425,7 +425,7 @@ The table below shows this endpoint's support for
 - `PreemptionConfig` `(PreemptionConfig)` - Options to enable preemption for various schedulers.
  - `SystemSchedulerEnabled` `(bool: true)` - Specifies whether preemption for system jobs is enabled. Note that
          if this is set to true, then system jobs can preempt any other jobs.
- - `BatchSchedulerEnabled` `(bool: true)` (Enterprise Only) - Specifies whether preemption for batch jobs is enabled. Note that
+ - `BatchSchedulerEnabled` <sup>0.9.2</sup> `(bool: true)` (Enterprise Only) - Specifies whether preemption for batch jobs is enabled. Note that
          if this is set to true, then batch jobs can preempt any other jobs.
- - `ServiceSchedulerEnabled` `(bool: true)` (Enterprise Only) - Specifies whether preemption for service jobs is enabled. Note that
+ - `ServiceSchedulerEnabled` <sup>0.9.2</sup> `(bool: true)` (Enterprise Only) - Specifies whether preemption for service jobs is enabled. Note that
          if this is set to true, then service jobs can preempt any other jobs.

website/source/docs/commands/acl/token-list.html.md.erb

@@ -6,7 +6,7 @@ description: >
   The token list command is used to list existing ACL tokens.
 ---
 
-# Command: acl token list
+# Command: acl token list <sup>0.9.2</sup>
 
 The `acl token list` command is used to list existing ACL tokens.
 

website/source/docs/commands/agent.html.md.erb

@@ -101,7 +101,7 @@ via CLI arguments. The `agent` command accepts the following arguments:
   integration.
 * `vault-cert-file=<path>`: The path to the certificate for Vault communication.
 * `vault-key-file=<path>`: The path to the private key for Vault communication.
-* `vault-namespace=<namespace>`: The Vault namespace used for the integration. 
+* `vault-namespace=<namespace>` <sup>0.9.2</sup>: The Vault namespace used for the integration. 
   Required for servers and clients. Overrides the Vault namespace read from the 
   VAULT_NAMESPACE environment variable.  
 * `vault-tls-skip-verify`: A boolean that determines whether to skip SSL

website/source/docs/commands/alloc.html.md.erb

@@ -19,10 +19,10 @@ subcommands are available:
 
 * [`alloc fs`][fs] - Inspect the contents of an allocation directory
 * [`alloc logs`][logs] - Streams the logs of a task
-* [`alloc restart`][restart] - Restart a running allocation or task
-* [`alloc signal`][signal] - Signal a running allocation
+* [`alloc restart`][restart] <sup>0.9.2</sup> - Restart a running allocation or task
+* [`alloc signal`][signal] <sup>0.9.2</sup> - Signal a running allocation
 * [`alloc status`][status] - Display allocation status information and metadata
-* [`alloc stop`][stop] - Stop and reschedule a running allocation
+* [`alloc stop`][stop] <sup>0.9.2</sup> - Stop and reschedule a running allocation
 
 [fs]: /docs/commands/alloc/fs.html "Inspect the contents of an allocation directory"
 [logs]: /docs/commands/alloc/logs.html "Streams the logs of a task"

website/source/docs/commands/alloc/exec.html.md.erb

@@ -6,7 +6,7 @@ description: >
   Runs a command in a container.
 ---
 
-# Command: alloc exec
+# Command: alloc exec <sup>0.9.2</sup>
 **Alias: `nomad exec`**
 
 The `alloc exec` command runs a command in a running allocation.

website/source/docs/commands/alloc/restart.html.md.erb

@@ -6,7 +6,7 @@ description: >
   Restart a running allocation or task
 ---
 
-# Command: alloc restart
+# Command: alloc restart <sup>0.9.2</sup>
 
 The `alloc restart` command allows a user to perform an in place restart of an
 an entire allocation or individual task.

website/source/docs/commands/alloc/signal.html.md.erb

@@ -6,7 +6,7 @@ description: >
   Signal a running allocation or task
 ---
 
-# Command: alloc signal
+# Command: alloc signal <sup>0.9.2</sup>
 
 The `alloc signal` command allows a user to perform an in place signal of an
 an entire allocation or individual task.

website/source/docs/commands/alloc/stop.html.md.erb

@@ -6,7 +6,7 @@ description: >
   Stop and reschedule a running allocation
 ---
 
-# Command: alloc stop
+# Command: alloc stop <sup>0.9.2</sup>
 
 The `alloc stop` command allows a user to perform an in-place restart of an
 entire allocation or individual task.

website/source/docs/commands/job/deployments.html.md.erb

@@ -34,7 +34,7 @@ of a job to display the list of deployments for.
 
 * `-verbose`: Show full information.
 
-* `-all`: Display all deployments matching the job ID, even those from an
+* `-all` <sup>0.9.2</sup>: Display all deployments matching the job ID, even those from an
    older instance of the job.
 
 ## Examples

website/source/docs/commands/job/periodic-force.html.md.erb

@@ -6,7 +6,7 @@ description: >
   The job periodic force command is used to force the evaluation of a periodic job.
 ---
 
-# Command: job periodic force
+# Command: job periodic force <sup>0.9.2</sup>
 
 The `job periodic force` command is used to [force the evaluation](/api/jobs.html#force-new-periodic-instance)
 of a [periodic job](/docs/job-specification/periodic.html).

website/source/docs/configuration/vault.html.md

@@ -74,7 +74,7 @@ vault {
 - `key_file` `(string: "")` - Specifies the path to the private key used for
   Vault communication. If this is set then you need to also set `cert_file`.
 
-- `namespace` `(string: "")` - Specifies the [Vault namespace](https://www.vaultproject.io/docs/enterprise/namespaces/index.html) 
+- `namespace` <sup>0.9.2</sup> `(string: "")` - Specifies the [Vault namespace](https://www.vaultproject.io/docs/enterprise/namespaces/index.html) 
   used by the Vault integration. If non-empty, this namespace will be used on 
   all Vault API calls.
 

website/source/docs/job-specification/update.html.md

@@ -93,7 +93,7 @@ job "docs" {
   last stable job on deployment failure. A job is marked as stable if all the
   allocations as part of its deployment were marked healthy.
 
-- `auto_promote` `(bool: false)` - Specifies if the job should auto-promote to the
+- `auto_promote` <sup>0.9.2</sup> `(bool: false)` - Specifies if the job should auto-promote to the
   canary version when all canaries become healthy during a deployment. Defaults to
   false which means canaries must be manually updated with the `nomad deployment promote`
   command.

website/source/downloads.html.erb

@@ -31,6 +31,10 @@ description: |-
       <p>
       Check out the <a href="https://github.com/hashicorp/nomad/blob/v<%= latest_version %>/CHANGELOG.md">v<%= latest_version %> CHANGELOG</a> for information on the latest release.
       </p>
+      <h3>Nomad 0.9.2 RC</h3>
+      <p>
+      A release candidate for Nomad 0.9.2 is also available! The release candidate can be <a href="https://releases.hashicorp.com/nomad/0.9.2-rc1/">downloaded on the Nomad releases page</a>.
+      </p>
     </div>
   </div>
 

website/source/layouts/docs.erb

@@ -116,7 +116,7 @@
                 <a href="/docs/commands/acl/token-info.html">token info</a>
               </li>
               <li<%= sidebar_current("docs-commands-acl-token-list") %>>
-                <a href="/docs/commands/acl/token-list.html">token list</a>
+                <a href="/docs/commands/acl/token-list.html">token list <sup>0.9.2</sup></a>
               </li>
               <li<%= sidebar_current("docs-commands-acl-token-self") %>>
                 <a href="/docs/commands/acl/token-self.html">token self</a>
@@ -136,7 +136,7 @@
             <a href="/docs/commands/alloc.html">alloc</a>
             <ul class="nav">
               <li<%= sidebar_current("docs-commands-alloc-exec") %>>
-                <a href="/docs/commands/alloc/exec.html">exec</a>
+                <a href="/docs/commands/alloc/exec.html">exec <sup>0.9.2</sup></a>
               </li>
               <li<%= sidebar_current("docs-commands-alloc-fs") %>>
                 <a href="/docs/commands/alloc/fs.html">fs</a>
@@ -145,16 +145,16 @@
                 <a href="/docs/commands/alloc/logs.html">logs</a>
               </li>
               <li<%= sidebar_current("docs-commands-alloc-restart") %>>
-                <a href="/docs/commands/alloc/restart.html">restart</a>
+                <a href="/docs/commands/alloc/restart.html">restart <sup>0.9.2</sup></a>
               </li>
               <li<%= sidebar_current("docs-commands-alloc-signal") %>>
-                <a href="/docs/commands/alloc/signal.html">signal</a>
+                <a href="/docs/commands/alloc/signal.html">signal <sup>0.9.2</sup></a>
               </li>
               <li<%= sidebar_current("docs-commands-alloc-status") %>>
                 <a href="/docs/commands/alloc/status.html">status</a>
               </li>
               <li<%= sidebar_current("docs-commands-alloc-stop") %>>
-                <a href="/docs/commands/alloc/stop.html">stop</a>
+                <a href="/docs/commands/alloc/stop.html">stop <sup>0.9.2</sup></a>
               </li>
             </ul>
           </li>
@@ -209,7 +209,7 @@
                 <a href="/docs/commands/job/plan.html">plan</a>
               </li>
               <li<%= sidebar_current("docs-commands-job-periodic-force") %>>
-                <a href="/docs/commands/job/periodic-force.html">periodic force</a>
+                <a href="/docs/commands/job/periodic-force.html">periodic force <sup>0.9.2</sup></a>
               </li>
               <li<%= sidebar_current("docs-commands-job-promote") %>>
                 <a href="/docs/commands/job/promote.html">promote</a>