Update LEOX info (#267)

* Update ont-leox-lxt-010s-h.md

* Update ont-leox-lxt-010h-d.md

* Update ont-leox-lxt-010h-d.md

* Update ont-leox-lxt-010s-h.md

_ont/ont-leox-lxt-010h-d.md

@@ -70,6 +70,6 @@ This ONT supports dual boot.
 
 {% include alert.html content="Before proceed on any modification, make a backup of files rtl8290b.data and europa.data from /var/config folder. These files include optical calibration of your ONT's laser, if you accidentally delete or ruin them, your ONT will be unusable" alert="Note" icon="svg-warning" color="yellow" %}
 
-{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' flash='/etc/scripts/flash' %}
+{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' flash='/etc/scripts/flash' customSwVersionAlert='This needs the OMCI_OLT_MODE value to be set to 21' omciOLT21='true' %}
 
 

_ont/ont-leox-lxt-010s-h.md

@@ -66,9 +66,10 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a
 
 - V3.3.4L3
 - V3.3.4L4rc1 (Fix 2.5GbE HiSGMII)
+- V3.3.4L4rc5
 
-{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' speedLan='178' customSpeedLanAlert='You need firmware `V3.3.4L4rc1` or higher. Before editing the speed make sure your hardware supports it. If you try to use any mode not listed here, stick will default to mode 1.' flash='/etc/scripts/flash' %}
+{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' speedLan='178' customSpeedLanAlert='You need firmware `V3.3.4L4rc1` or higher. Before editing the speed make sure your hardware supports it. If you try to use any mode not listed here, stick will default to mode 1.' flash='/etc/scripts/flash' customSwVersionAlert='This needs the OMCI_OLT_MODE value to be set to 21' omciOLT21='true' %}
 
 # Known Bugs
 
-The stock firmware doesn't work @ 2.5GbE. There is a new firmware avaliable from LeoLabs that fixes this issue.
+The stock firmware doesn't work @ 2.5GbE. There is a new firmware avaliable from LeoLabs that fixes this issue.