conf-HA

je place ici toute la conf pour HA, Frigate, esp etc.

pour installer le code (generé par esphome) si le wifi marche pas https://web.esphome.io/?dashboard_install puis aller sous esphome dans HA

code de l'esp substitutions: name: capteur-odeur friendly_name: Capteur odeurs

esphome: name: ${name} friendly_name: ${friendly_name} min_version: 2024.6.0 name_add_mac_suffix: false project: name: esphome.web version: dev

esp32: board: esp32dev framework: type: arduino

Enable logging

logger:

Enable Home Assistant API

api:

Allow Over-The-Air updates

ota:

• platform: esphome

Allow provisioning Wi-Fi via serial

improv_serial:

wifi:

Set up a wifi access point

ap: ssid: "Capteur-odeur" password: "231123112311" ssid: "gypaisSL en bas" password: "231123112311"

In combination with the ap this allows the user

to provision wifi credentials to the device via WiFi AP.

captive_portal:

dashboard_import: package_import_url: github://esphome/example-configs/esphome-web/esp32.yaml@main import_full_config: true

Sets up Bluetooth LE (Only on ESP32) to allow the user

to provision wifi credentials to the device.

esp32_improv: authorizer: none

To have a "next url" for improv serial

web_server: port: 80

sensor:

• platform: adc pin: GPIO36 name: "Odeur 1" update_interval: 2s accuracy_decimals: 3 attenuation: 11db

• platform: adc pin: GPIO39 name: "Odeur 2" update_interval: 2s accuracy_decimals: 3 attenuation: 11db

• platform: adc pin: GPIO34 name: "Odeur 3" update_interval: 2s accuracy_decimals: 3 attenuation: 11db

• platform: adc pin: GPIO35 name: "Odeur 4" update_interval: 2s accuracy_decimals: 3 attenuation: 11db

• platform: dht pin: GPIO2 temperature: name: "Température odeur" humidity: name: "Humidité odeur" model: DHT22 update_interval: 10s

#output:

- platform: gpio

pin: GPIO25

id: GPIO25

#switch:

- platform: output

name: "Switch 0 à 3.3v"

output: GPIO25

text_sensor:

• platform: wifi_info ip_address: name: "IP Address"

button:

• platform: restart name: "Redémarrer ESP"