🔸 updated in the past 7 days Changelog
Proxmox VE 7 Post Install
This script will Disable the Enterprise Repo, Add & Enable the No-Subscription Repo, Add & Disable Test Repo (repo's can be enabled/disabled via the UI in Repositories) and attempt the No-Nag fix.
Run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/misc/post_install.sh)"It's recommended to update Proxmox after running this script, before adding any VM/CT.
Proxmox Dark Theme
A dark theme for the Proxmox Web UI by Weilbyte
Run the following in the Proxmox Shell.
bash <(curl -s https://raw.githubusercontent.com/Weilbyte/PVEDiscordDark/master/PVEDiscordDark.sh ) installTo uninstall the theme, simply run the script with the uninstall command.
Home Assistant OS VM
To create a new Proxmox Home Assistant OS VM, run the following in the Proxmox Shell
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/vm/haos_vm.sh)"After the script completes, click on the VM, then on the Summary tab to find the VM IP.
Home Assistant Interface - IP:8123
Home Assistant Container LXC (Podman)
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/podman_ha_container.sh)"After the script completes, If you're dissatisfied with the default settings, click on the LXC, then on the Resources tab and change the settings to what you desire. Changes are immediate.
Home Assistant Interface - IP:8123
Yacht Interface - IP:8000
⚙️ Path to HA /config
/var/lib/containers/storage/volumes/hass_config/_data⚙️ To edit the HA configuration.yaml
Run in the LXC console
nano /var/lib/containers/storage/volumes/hass_config/_data/configuration.yamlSave and exit the editor with “Ctrl+O”, “Enter” and “Ctrl+X”
⚙️ Import Data From a Existing Home Assistant LXC to a Podman Home Assistant LXC
Run in the Proxmox Shell
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/misc/ha-copy-data-podman.sh)"⚙️ To allow USB device passthrough:
Run in the Proxmox Shell. (replace 106 with your LXC ID)
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/misc/usb-passthrough.sh)" -s 106Reboot the LXC to apply the changes
⚙️ To Install HACS:
Run in the LXC console
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/misc/podman_hacs.sh)"After install, reboot Home Assistant and clear browser cache then Add HACS integration.
⚙️ To Update Home Assistant:
Run in the LXC console
./update.sh⚙️ Initial Yacht Login
username
password
pass🔸Home Assistant Container LXC
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/homeassistant.sh)"After the script completes, If you're dissatisfied with the default settings, click on the LXC, then on the Resources tab and change the settings to what you desire. Changes are immediate.
Home Assistant Interface - IP:8123
Portainer Interface - IP:9000
⚙️ Path to HA /config
/var/lib/docker/volumes/hass_config/_data⚙️ To Edit the HA configuration.yaml (Recommend Using Webmin System Administration)
Run in the LXC console
nano /var/lib/docker/volumes/hass_config/_data/configuration.yamlSave and exit the editor with “Ctrl+O”, “Enter” and “Ctrl+X”
⚙️ Import Data From a Existing Home Assistant LXC to another Home Assistant LXC
Run in the Proxmox Shell
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/misc/ha-copy-data.sh)"⚙️ To Allow USB Device Passthrough:
Run in the Proxmox Shell. (replace 106 with your LXC ID)
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/misc/usb-passthrough.sh)" -s 106Reboot the LXC to apply the changes
⚙️ To Install HACS:
Run in the LXC console
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/misc/hacs.sh)"After install, reboot Home Assistant and clear browser cache then Add HACS integration.
⚙️ Update Menu
Run in the LXC console
./update⚙️ Migrate to the latest Update Menu
Run in the LXC console
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/misc/latest-update-menu.sh)"ESPHome LXC
To create a new Proxmox ESPHome LXC Container, run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/esphome_container.sh)"ESPHome Interface - IP:6052
⚙️ To Update ESPHome
Run in the LXC console
pip3 install esphome --upgrade🔸Nginx Proxy Manager LXC
To create a new Proxmox Nginx Proxy Manager LXC Container, run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/nginx-proxy-manager.sh)"Forward port 80 and 443 from your router to your Nginx Proxy Manager LXC IP.
Add the following to your configuration.yaml in Home Assistant.
http:
use_x_forwarded_for: true
trusted_proxies:
- 192.168.100.27 ###(Nginx Proxy Manager LXC IP)###Nginx Proxy Manager Interface - IP:81
⚙️ Initial Login
username
password
changeme⚙️ To Update Nginx Proxy Manager
Run in the LXC console
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/misc/npm_update.sh)"🔸MQTT LXC
To create a new Proxmox MQTT LXC Container, run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/mqtt.sh)"Mosquitto comes with a password file generating utility called mosquitto_passwd.
sudo mosquitto_passwd -c /etc/mosquitto/passwd <usr>Password: < password >
Create a configuration file for Mosquitto pointing to the password file we have just created.
sudo nano /etc/mosquitto/conf.d/default.confThis will open an empty file. Paste the following into it.
allow_anonymous false
persistence true
password_file /etc/mosquitto/passwd
listener 1883Save and exit the text editor with "Ctrl+O", "Enter" and "Ctrl+X".
Now restart Mosquitto server.
sudo systemctl restart mosquitto⚙️ To Update MQTT:
Run in the LXC console
apt update && apt upgrade -y🔸Node-Red LXC
To create a new Proxmox Node-RED LXC Container, run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/node-red.sh)"Node-Red Interface - IP:1880
⚙️ To Restart Node-Red:
Run in the LXC console
node-red-restart⚙️ To Update Node-Red:
Run in the LXC console (Restart after update)
npm install -g --unsafe-perm node-red⚙️ To Install Node-Red Themes
Run in the LXC console
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/misc/node-red-themes.sh)"🔸Mariadb LXC
To create a new Proxmox Mariadb LXC Container, run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/mariadb.sh)"To enable MariaDB to listen to remote connections, you need to edit your defaults file. To do this, open the console in your MariaDB lxc:
nano /etc/mysql/my.cnfUn-comment port =3306
Save and exit the editor with "Ctrl+O", "Enter" and "Ctrl+X".
nano /etc/mysql/mariadb.conf.d/50-server.cnfComment bind-address = 127.0.0.1
Save and exit the editor with "Ctrl+O", "Enter" and "Ctrl+X".
For new MariaDB installations, the next step is to run the included security script. This script changes some of the less secure default options. We will use it to block remote root logins and to remove unused database users.
Run the security script:
sudo mysql_secure_installationEnter current password for root (enter for none): enter
Switch to unix_socket authentication [Y/n] y
Change the root password? [Y/n] n
Remove anonymous users? [Y/n] y
Disallow root login remotely? [Y/n] y
Remove test database and access to it? [Y/n] y
Reload privilege tables now? [Y/n] y
We will create a new account called admin with the same capabilities as the root account, but configured for password authentication.
sudo mysqlPrompt will change to MariaDB [(none)]>
Create a new local admin (Change the username and password to match your preferences)
CREATE USER 'admin'@'localhost' IDENTIFIED BY 'password';Give local admin root privileges (Change the username and password to match above)
GRANT ALL ON *.* TO 'admin'@'localhost' IDENTIFIED BY 'password' WITH GRANT OPTION;Now, we'll give the user admin root privileges and password-based access that can connect from anywhere on your local area network (LAN), which has addresses in the subnet 192.168.100.0/24. This is an improvement because opening a MariaDB server up to the Internet and granting access to all hosts is bad practice.. Change the username, password and subnet to match your preferences:
GRANT ALL ON *.* TO 'admin'@'192.168.100.%' IDENTIFIED BY 'password' WITH GRANT OPTION;Flush the privileges to ensure that they are saved and available in the current session:
FLUSH PRIVILEGES;Following this, exit the MariaDB shell:
exitLog in as the new database user you just created:
mysql -u admin -pCreate a new database:
CREATE DATABASE homeassistant;Following this, exit the MariaDB shell:
exitChecking status.
sudo systemctl status mariadbChange the recorder: db_url: in your HA configuration.yaml
Example: mysql://admin:[email protected]:3306/homeassistant?charset=utf8mb4
⚙️ To Update Mariadb:
Run in the LXC console
apt update && apt upgrade -y⚙️ Adminer (formerly phpMinAdmin) is a full-featured database management tool
http://your-mariadb-lxc-ip/adminer/
🔸Zigbee2MQTT LXC
To create a new Proxmox Zigbee2MQTT LXC Container, run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/zigbee2mqtt.sh)"⚙️ Determine the location of your adapter
Run in the LXC console
ls -l /dev/serial/by-idExample Output: lrwxrwxrwx 1 root root 13 Jun 19 17:30 usb-1a86_USB_Serial-if00-port0 -> ../../ttyUSB0
⚙️
Run in the LXC console
nano /opt/zigbee2mqtt/data/configuration.yamlSave and exit the editor with “Ctrl+O”, “Enter” and “Ctrl+X”
Example:
frontend:
port: 9442
homeassistant: true
permit_join: false
mqtt:
base_topic: zigbee2mqtt
server: 'mqtt://192.168.86.224:1883'
user: usr
password: pwd
keepalive: 60
reject_unauthorized: true
version: 4
serial:
port: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
#adapter: deconz #(uncomment for ConBee II)
advanced:
pan_id: GENERATE
network_key: GENERATE
channel: 20⚙️ Zigbee2MQTT can be started after completing the configuration
Run in the LXC console
cd /opt/zigbee2mqtt
npm start⚙️ To update Zigbee2MQTT
Run in the LXC console
bash /opt/zigbee2mqtt/update.sh⚙️ Import Data From a Existing Zigbee2MQTT LXC to another Zigbee2MQTT LXC
Run in the Proxmox Shell
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/misc/z2m-copy-data.sh)"Zwavejs2MQTT LXC
To create a new Proxmox Zwavejs2MQTT LXC Container, run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/zwavejs2mqtt_container.sh)"Zwavejs2MQTT Interface - IP:8091
🔸Debian 11 LXC
To create a new Proxmox Debian 11 (curl. sudo, auto login) LXC Container, run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/debian.sh)"After the script completes, If you're dissatisfied with the default settings, click on the LXC, then on the Resources tab and change the settings to what you desire. Changes are immediate.
⚙️ To Update Debian 11
Run in the LXC console
apt update && apt upgrade -y🔸Ubuntu 21.10 LXC
To create a new Proxmox Ubuntu 21.10 (curl. sudo, auto login) LXC Container, run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/ubuntu.sh)"After the script completes, If you're dissatisfied with the default settings, click on the LXC, then on the Resources tab and change the settings to what you desire. Changes are immediate.
⚙️ To Update Ubuntu 21.10
Run in the LXC console
apt update && apt upgrade -yGamUntu LXC
GamUntu is Ubuntu 21.10, Docker, Docker Compose, ZFS Support, USB Passthrough, Webmin System Administration and Hardware Acceleration all baked in!
To create a new Proxmox GamUntuLXC Container, run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/gamuntu_container.sh)"After the script completes, If you're dissatisfied with the default settings, click on the LXC, then on the Resources tab and change the settings to what you desire. Changes are immediate.
⚙️ To Update GamUntu
Run in the LXC console
apt update && apt upgrade -yPlex Media Server LXC
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/plex_container.sh)"After the script completes, If you're dissatisfied with the default settings, click on the LXC, then on the Resources tab and change the settings to what you desire. Changes are immediate.
Plex Media Server Interface - IP:32400/web
⚙️ To Update Plex Media Server:
Run in the LXC console
apt update && apt upgrade -y⚙️ Import Data From a Existing Plex Media Server LXC to another Plex Media Server LXC
Run in the Proxmox Shell
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/misc/pms-copy-data.sh)"Jellyfin Media Server LXC
To create a new Proxmox Jellyfin Media Server LXC, run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/jellyfin_container.sh)"After the script completes, If you're dissatisfied with the default settings, click on the LXC, then on the Resources tab and change the settings to what you desire. Changes are immediate.
Jellyfin Media Server Interface - IP:8096
⚙️ To Update Jellyfin Media Server
Run in the LXC console
apt update && apt upgrade -yPi-hole LXC
To create a new Proxmox Pi-hole LXC, run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/pihole_container.sh)"⚙️ To set your password:
Run in the LXC console
pihole -a -p⚙️ To Update Pi-hole:
Update from the Pi-hole UI🔸AdGuard Home LXC
To create a new Proxmox AdGuard Home LXC, run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/adguard.sh)"AdGuard Home Setup Interface - IP:3000 (After Setup use only IP)
(For the Home Assistant Integration, use port 80 not 3000)
⚙️ To Update Adguard
Update from the Adguard UIMotionEye NVR LXC
To create a new Proxmox MotionEye NVR LXC, run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/motioneye_container.sh)"
After the script completes, If you're dissatisfied with the default settings, click on the LXC, then on the Resources tab and change the settings to what you desire. Changes are immediate.
MotionEye Interface - IP:8765
⚙️ Initial Login
username
admin
password
⚙️ To Update MotionEye
Run in the LXC console
pip install motioneye --upgradeWebmin System Administration
To Install Webmin System Administration (Screenshot),
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/misc/webmin.sh)"If you prefer to manage all aspects of your Proxmox LXC from a graphical interface instead of the command line interface, Webmin might be right for you.
Benefits include automatic daily security updates, backup and restore, file manager with editor, web control panel, and preconfigured system monitoring with optional email alerts.
Webmin Interface - https:// IP:10000 (https)
⚙️ Initial Login
username
root
password
root
⚙️ To Update Webmin
Update from the Webmin UI⚙️ To Uninstall Webmin
bash /etc/webmin/uninstall.shVaultwarden LXC
To create a new Proxmox Vaultwarden LXC, run the following in the Proxmox Shell.
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/vault_container.sh)"
It builds from source, which takes time and resources. After the installation, resources can be set to Normal Settings.
Expect 30+ minute install time.
Vaultwarden Interface - IP:8000