-
Notifications
You must be signed in to change notification settings - Fork 87
MMA7660
Library for controlling accelerometer MMA7660 with the Beaglebone Black's I2C's pins.
This library can be used for tap detection, shake detection and orientation detection.
Datasheet is available here
Creates an instance of the class MMA7660 i2c_no can be 1 or 2 based on the i2c bus used
Returns the value of X dimension. Value of X can be from -31 to 32
Returns the value of Y dimension. Value of Y can be from -31 to 32
Returns the value of Z dimension. Value of Z can be from -31 to 32
Returns a list of X,Y and Z dimension values. Values of X, Y and Z can be from -31 to 32
Sets interrupt on interrupt_pin and calls callback_funtion when interrupt occurs
configuration :
INT_FB - Front/Back position change causes an interrupt
INT_PL - Up/Down/Right/Left position change causes interrupt
INT_PD - Successful tap detection causes an interrupt
INT_SHX - Shake detected on the X-axis causes an interrupt
INT_SHY - Shake detected on the Y-axis causes an interrupt
INT_SHZ - Shake detected on the Z-axis causes an interrupt
######callback_funtion : has to take(back_front, portrait_landscape, tap, shake) as parameters.
back_front = 1 - Front: Equipment is lying on its front
back_front = 2 - Back: Equipment is lying on its back
portrait_landscape = 1 - Left: Equipment is in landscape mode to the left
portrait_landscape = 2 - Right: Equipment is in landscape mode to the right
portrait_landscape = 5 - Down: Equipment standing vertically in inverted orientation
portrait_landscape = 6 - Up: Equipment standing vertically in normal orientation
tap = 0 - Tap Not Detected
tap = 1 - Tap Detected
shake = 0 - Shake Not Detected
shake = 1 - Shake Detected
sets tap detection threshold Tap detection threshold = +/-value counts
Sets the rate of tilt debounce filtering When value = 0 - Tilt debounce filtering is disabled. For other values, value number of samples have to match before the device updates portrait/ landscape data.
Sets the tap detection debounce filtering to value The tap detection debounce filtering requires value adjacent tap detection tests to be the same to trigger a tap event
returns a list with the back_front and portrait_landscape data.
back_front = 1 - Front: Equipment is lying on its front back_front = 2 - Back: Equipment is lying on its back
portrait_landscape = 1 - Left: Equipment is in landscape mode to the left portrait_landscape = 2 - Right: Equipment is in landscape mode to the right portrait_landscape = 5 - Down: Equipment standing vertically in inverted orientation portrait_landscape = 6 - Up: Equipment standing vertically in normal orientation
Detaches the interrupt
sets the device in standby mode and closes the connection to the device.