Tank Controller Library

Arduino library for the Open Acidification pH Stat Controller

Use

Development

• Clone (or fork and clone if you might contribute to the project) this repository to the Arduino Libraries directory.
• Use scripts/install.sh to do the initial install.
• After that use scripts/testAndBuild.sh to test.
• To build the GUI simulator, see GUI/build.sh.

Install

To install onto an Arduino Mega2560 use the Arduino IDE.

By default, the Arduino compiler links to a printf library that does not support printing floating point numbers. To get that feature (which we use!), add the following lines to boards.txt and use the Tools menu to select "RV printf Version: "Full printf". On macOS, the boards.txt is located at ~/Library/Arduino15/packages/arduino/hardware/avr/1.8.3. For background see here.

menu.printf=AVR printf Version

mega.menu.printf.default=Default printf
mega.menu.printf.default.compiler.c.elf.extra_flags=
mega.menu.printf.full=Full printf
mega.menu.printf.full.compiler.c.elf.extra_flags=-Wl,-u,vfprintf -lprintf_flt
mega.menu.printf.minimal=Minimal printf
mega.menu.printf.minimal.compiler.c.elf.extra_flags=-Wl,-u,vfprintf -lprintf_min

Contributors ✨

Thanks goes to these wonderful people (emoji key):

Kirt Onthank 💼 💻 🎨 🤔 🧑‍🏫	Preston Carman 🐛 💻 🤔 🧑‍🏫 👀	James Foster 💻 🤔 🧑‍🏫 📆 👀 🐛	Kavikick 💻	eucalvo 💻	Lizj96 💻
khalilxl 💻	atg7000 💻	Caleb Herbel 💻	Lucas Saca 💻	EvanKropf 💻

This project follows the all-contributors specification. Contributions of any kind welcome!