Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
bsp: linux-lmp-fslc: bump kernel 6.1-2.2.x-imx to 1e6abd59ab9ff1
This revision includes the lf-6.1.55-2.2.0 tag. Refresh patches based on the new kernel rev. Relevant changes: - 1e6abd59ab9ff1 Merge pull request #669 from tq-niebelm/6.1-2.2.x-imx-update-to-lf-6.1.55-2.2.1 - dbc41281fba822 Merge tag 'lf-6.1.55-2.2.1' into 6.1-2.2.x-imx - de69f223c019fe Merge pull request #659 from tq-niebelm/6.1-2.2.x-imx-ti-sn65dsi83-reverts - 60fecd90ea6bce Revert "drm/bridge: ti-sn65dsi83: Fix enable/disable flow to meet spec" - 131f7215711540 Revert "drm/bridge: sn65dsi83: Register and attach our DSI device at probe" - 8fe2b6682a9340 Revert "drm/bridge: ti-sn65dsi83: Do not cache dsi_lanes and host twice" - bcb5541dc3a599 Revert "drm/bridge: ti-sn65dsi83: Convert to drm_of_get_data_lanes_count" - 2bfda7392e6621 Merge pull request #658 from tq-niebelm/6.1-2.2.x-imx - 86a389d3e879c2 Merge remote-tracking branch 'lf-6.1.y' into 6.1-2.2.x-imx - dad30ee7194687 Merge pull request #657 from tq-niebelm/fslc-6.1-2.2.x-imx-fixes - 5f6af3b3075532 arm64: dts: imx8mm: fix csi nodes for NXP vendor stack - 2443a1146bfd3b phy: phy-fsl-lynx-28g: fix wrong merge resolve - de8d5a614f8ffb MGS-7591 [#imx-3270] Modify CONFIG_PM_RUNTIME version usage issues - 97efb032676c50 LF-8498: config: Enable polyval, xctr cipher test support - 0ae20f1e6f8113 LF-11170-1: arm64: dts: imx91p-11x11-evk-aud-hat: probe regulater before codec - 83d6d215f7c620 iio: adc: imx8qxp: Fix address for command buffer registers - 7afdcff705d96f LF-11170: arm64: dts: imx93-11x11-evk-aud-hat: probe regulater before codec - cf8fcbc8523fa3 LF-11134-1: arm64: dts: imx93-11x11-evk-aud-hat: Add GPIO power control - ffc3e55f631662 LF-11134: arm64: dts: imx91p-11x11-evk-aud-hat: Add GPIO power control - 770c5fe2c1d152 LF-10611 arm64: dts: imx8mq-evk-rpmsg: fix CMA memory reservation fail - 64960d896c1cb6 net: sdk_fman: avoid division by zero - 9cc41a972bcce5 net: fman: fix variable type - 142a245ddfeef7 soc: fsl: qbman: check kzalloc return value - 7b3fb7cdb5a5be net: phylink: fix phylink_validate() call with c73 from phylink_ethtool_ksettings_set() - 37c18120a2f3a6 LF-10500: arm64: dts: fix imx8qxp WCPU rpmsg dts issue - c38fea2a0493b0 LF-10485: mtd: spinand: gigadevice: Fix the get ecc status issue - 71d8f04a1b0841 LF-9073 ASoC: soc-compress: Fix deadlock in soc_compr_open_fe - 0392c61d9eb5cb phy: lynx-10g: fix bugs in 'fsl,ls1088a-serdes1' and mark it as tested - 55dab2ec82591e phy: lynx-10g: remove the 'not tested' comment from 'fsl,ls2088a-serdes1' - bfba0600429302 LF-7770: arm64: config: imx_v8_defconfig: enable rpmsg sample modules - a80a7f5af6e51b LF-10420-3: arm64: dts: imx8mp: swpdm: add fsl,sai-mclk-direction-output - 4f95512483e89f LF-10420-2: arm64: dts: imx8mn: swpdm: add fsl,sai-mclk-direction-output - 9fae93985eabcf LF-10420-1: arm64: dts: imx8mm: swpdm: add fsl,sai-mclk-direction-output - 452a99068fe59a bus: fsl-mc: fix double-free on mc_dev - f18c15e9a0f195 phy: lynx-10g: stop on lynx_pccr_read() in lynx_10g_backup_pccr_val() - 6b4dc6d20b6714 arch: arm64: lx2160a-rdb: comment out tx-disable-gpios from the SFP cage description - 2cee209afbdd81 net: phy: lynx-10g: implement phy_exit() operation - 3479611119244e net: phy: lynx-28g: implement phy_exit() operation - 867b5c9b17c119 net: dpaa2-mac: fix the case with no 'phys' in the DT node - faa38ac84e7d93 MLK-26155 arm64: dts: imx8mp-evk-sof-pdm: Fix PDM CLK rate - 48ca927d214630 LF-10365 nvmem: imx: i.MX8ULP: update fsb_bank_reg of imx8ulp_fsb_s400_hw - 9cf822ab277204 Revert "LF-9994-2 mmc: sdio: hold retuning when sdio device in 1 bit mode" - 7db012d43f8569 net: pcs: mtip_backplane: fix ineffective mtip_run_irqpoll_once() - 11b6c43ff2bff7 MGS-6408 [#imx-2696] Add array index check for gckDEVICE_Profiler_Dispatch - 1c45afaf0ac684 MGS-7320 [#ccc] Fix gcoOS_MemCopy crash issue in VSI GPU library - 8a182e1463bafd LF-10341: ASoC: SOF: imx: Add SNDRV_PCM_INFO_BATCH flag - 7e3463ae041a59 MA-21376 [#imx-3195] 4Kp60 video playback is tearing and not smooth when not full-screen - 2167588233074e LF-10338-4 mtd: spinand: winbond: Add support for W25N02KW - ba78f2f7748079 LF-10338-3 mtd: spinand: winbond: Fix ecc_get_status - 1b2587251b95e3 LF-10338-2 mtd: spinand: winbond: add Winbond W25N02KV flash support - e7894488d03f32 LF-10338-1 mtd: spinand: winbond: fix flash identification - ab75c177174670 LF-9376-10 arm64: dts: Add sdma3 root clock - 68bc33f81a00fd LF-9376-9 ASoC: SOF: ipc3: Add MICFIL type - 316014cc74c88c LF-9376-8 ASoC: SOF: ipc3: Add micfil_tokens - 7a0c832405c4dc arm64: dts: lx2160a: add compatible string to Lynx PCS devices - bba200f774e02b net: dpaa: add support for copper backplanes using the mtip phylib wrapper - c2c2993a809b3e net: phy: mtip_backplane: add a phylib wrapper over the phylink_pcs core - 0b661c4889c3b8 phy: lynx-10g: new driver - 2dcbc1d2a6ae16 dt-bindings: phy: lynx-10g: initial document - f665001bd4296b phy: lynx-28g: add support for multi-lane 40GBase-KR4 - 3eb4303a931224 phy: lynx-28g: report the current protocol converter's MDEV_PORT through phy_get_status() - a322e39fa41e69 phy: lynx-28g: set up equalization for 25G according to AN12950 - a72d50fd112e2d phy: lynx-28g: add algorithm for IEEE 802.3 C72 (10GBase-KR) link training - c9c9d09e10215e phy: lynx-28g: add support for backplane modes through PHY_MODE_ETHERNET_LINKMODE - f74d6747a377b7 phy: lynx-28g: refactor the CDR lock check from the work to a function - 134cd5b20205bd phy: lynx-28g: convert iowrite32() calls with magic values to macros - 09636425cbd47a phy: lynx-28g: distinguish between 10GBASE-R and USXGMII - 2dc301dcb6a663 phy: lynx-28g: refactor lane->interface to lane->mode - 265b29ab1370e6 phy: lynx-28g: replace LYNX_28G_SGMIIaCR1_SGPCS_DIS with 0 - 00a02e98ac1671 phy: lynx-28g: restructure protocol configuration register accesses - 43cd22ed046f79 phy: lynx-28g: add debugging print in CDR lock workaround - e0f3ef0b77ff1d phy: lynx-28g: implement phy_get_status() for CDR lock - f73df580c2379a phy: lynx-28g: truly power the lanes up or down - cc6a01127be365 phy: lynx-28g: don't concatenate macros for lynx_28g_lane_rmw() args "val" and "mask" - 6b1763a81cb51d phy: lynx-28g: serialize concurrent phy_set_mode_ext() calls to shared registers - 8842744c5998a7 phy: lynx-28g: lock PHY while performing CDR lock workaround - fc32b4c550fc26 phy: lynx-28g: cancel the CDR check work item on the remove path - 30775640da9d21 net: pcs: lynx: use MTIP AN/LT block for copper backplanes - 3a83aad7281076 net: pcs: mtip_backplane: add driver for MoreThanIP backplane AN/LT core - d919593772b747 phy: allow querying the address of protocol converters through phy_get_status() - ae7386d1ebb917 phy: ethernet: add configuration interface for copper backplane Ethernet PHYs - aa5e31dc62f069 phy: introduce the PHY_MODE_ETHERNET_LINKMODE mode for phy_set_mode_ext() - 5d9af070508e9d phy: introduce phy_get_status() and use it to report CDR lock - a37336d73be5c4 net: enetc: integrate SerDes phys with lynx pcs - 445393b71617e5 net: dsa: felix: integrate SerDes phys with lynx pcs - 07aa56adb7caf5 net: mscc: ocelot: expose serdes configuration function - 264e9f11e2813a net: mscc: ocelot: expose generic phylink_mac_config routine - d1b4d68f95a0eb net: dpaa2-mac: add phylink c73 support - b19b8a126a7d9b net: dpaa2-mac: extend serdes code for multiple phys - 7a560782c979c7 net: pcs: lynx: incorporate SerDes PHY handling from dpaa2-mac - b07601ef3420f3 Revert "net: dpaa2: add support for retimer runtime configuration" - 50bd0f45b581de dt-bindings: net: fsl-dpmac: allow phys, phy-names and num-lanes - 601448a5f0cbe4 dt-bindings: lynx-pcs: add a second compatible string for LX2160A - 436cacc339441f dt-bindings: net: Add Lynx PCS binding - 437a7c67817908 net: phylink: add support for managed = "c73" - 9694e62e0c74da net: explicitly check in of_phy_is_fixed_link() for managed = "in-band-status" - db6dcf3afbd999 net: phylink: add the 25G link modes to phylink_c73_priority_resolution[] - f78a11a4cc84a7 net: phylink: avoid unnecessary phylink_validate() calls during phylink_create() - 283cd0225ae484 net: ethtool: introduce ethtool_link_mode_str() - 1063a77a023c8a net: mii: add C73 link mode and base page helpers - b6da0b4886f09f net: dsa: felix: introduce phy-mode = "10g-qxgmii" to replace "usxgmii" - d9d396083c3547 net: phylink: move phylink_pcs_neg_mode() to phylink.c - 3d19e5f8a7295c net: phylink: reimplement population of pl->supported for in-band - a80f7dd6adfde7 net: phylink: centralize phy_interface_mode_is_8023z() && phylink_autoneg_inband() checks - 596e70bdc2a96f net: pcs: lynx: fix lynx_pcs_link_up_sgmii() not doing anything in fixed-link mode - 3380d4367d067d net: phylink: add support for PCS link change notifications - 9abc48302f956d net: phylink: add pcs_pre_config()/pcs_post_config() methods - 639ed5e4c4875c net: phylink: add pcs_enable()/pcs_disable() methods - 2014f43b1682e0 net: pcs: lynx: update PCS driver to use neg_mode - 2cb8adc9227a29 net: phylink: pass neg_mode into phylink_mii_c22_pcs_config() - 0517c7f8771c14 net: pcs: pcs-lynx: use phylink_get_link_timer_ns() helper - cc8ee2386adbe9 net: phylink: add phylink_get_link_timer_ns() helper - 159d12b00ec635 net: phylink: convert phylink_mii_c22_pcs_config() to neg_mode - 90b077dc3480e3 phylink: ReST-ify the phylink_pcs_neg_mode() kdoc - eb6c6f2accfdd9 net: phylink: fix sphinx complaint about invalid literal - f07b64de41eefb net: phylink: add PCS negotiation mode - 901e63daf90cb3 net: dpaa2: use pcs-lynx's check for fwnode availability - 6a7b405fab0f2c net: pcs: lynx: check that the fwnode is available prior to use - 16cd22819755c5 net: pcs: lynx: change lynx_pcs_create() to return error-pointers - b043d182c47d9e net: pcs: lynx: make lynx_pcs_create() static - 5a255075e4b681 net: dpaa2-mac: use lynx_pcs_create_fwnode() - 8c127d197cc791 net: dpaa2: Add some debug prints on deferred probe - f75294770af50e net: pcs: lynx: add lynx_pcs_create_fwnode() - b04fe5168fa9cc net: pcs: lynx: remove lynx_get_mdio_device() - 894ccb7e3f8342 net: dpaa2-mac: allow lynx PCS to manage mdiodev lifetime - e42005d464149f net: dpaa2-mac: use correct interface to free mdiodev - ddbe59d31865e0 net: enetc: use lynx_pcs_create_mdiodev() - 8295d74c90abfd net: dsa: ocelot: use lynx_pcs_create_mdiodev() - e2b3f555c0bd72 net: pcs: lynx: add lynx_pcs_create_mdiodev() - fa6bc1bc0d6ca4 net: stmmac: use xpcs_create_mdiodev() - db88caaa2b3e5c net: pcs: xpcs: add xpcs_create_mdiodev() - 8230ca4cd7b61d net: mdio: add mdio_device_get() and mdio_device_put() - 4d11d54de10a63 net: dsa: mv88e6xxx: move link forcing to mac_prepare/mac_finish - 88cba7dff22444 net: dsa: add support for mac_prepare() and mac_finish() calls - bf134ce998706b net: phylink: provide phylink_pcs_config() and phylink_pcs_link_up() - 1eac07fc7696f5 net: pcs: xpcs: avoid reading STAT1 more than once - 0168b367a9e4e5 net: pcs: xpcs: use phylink_resolve_c73() helper - 505ef7b97890fd net: pcs: xpcs: correct pause resolution - 649d9520e9d667 net: pcs: xpcs: correct lp_advertising contents - 8d2e906b8eaf32 net: pcs: xpcs: use mii_c73_to_linkmode() helper - 332d8d416ef491 net: pcs: xpcs: clean up reading clause 73 link partner advertisement - 8dcfc2ca5359fb net: phylink: add function to resolve clause 73 negotiation - 7b8056eb0bff0b net: phylink: remove duplicated linkmode pause resolution - ab70780e4c278d net: mdio: add clause 73 to ethtool conversion helper - 723bcd38878c86 net: phylink: require supported_interfaces to be filled - 7a5819b9678f27 net: phylink: remove an_enabled - 6a803e69ddafa0 net: pcs: lynx: don't print an_enabled in pcs_get_state() - 9298bd0409a4c0 net: pcs: xpcs: use Autoneg bit rather than an_enabled - 86b2afb5255e19 net: dpaa2-mac: use Autoneg bit rather than an_enabled - 187f6398afc6cb net: mdio-mux: be compatible with parent buses which only support C45 - 9ff43a6b3ce2ff net: mdio-mux: show errors on probe failure - 005dc5699ba43c net: mdio-mux: fix C45 access returning -EIO after API change - fcc78786880699 device property: Introduce fwnode_device_is_compatible() helper - c0f94f4e179353 phy: Add devm_of_phy_optional_get() helper - ea433896aa06e8 Revert v1 of MTIP backplane AN/LT support - 2d49d167c60305 LF-9095: gpc: fwnode: Make imx pgc power domain also set the fwnode - 63bd8fa873a2cd LF-7770: remoteproc: imx_dsp_rproc: add mandatory find_loaded_rsc_table op - 64bba709f75824 MGS-7326 [#imx-2976] 0093-KERNEL-SPACE-Update-version-for-rel_6.4.11.p2_202308 - c7f342d2e54b2f MGS-7326 [#imx-2976] 0090-KERNEL-SPACE-Update-gc_feature_database.h-to-712476 - de8ebfd7ba292f MGS-7326 [#imx-2976] 0083-CL709461-KERNEL-SPACE-22Q2_NXP-ocl30-qnx-Merging-671 - dcac08503d160f LF-10301: tee-skcipher: fix 32-bit compilation warning - f361f41ee5d92b net: fec: ENET-QOS on i.MX93 board - a7323d658bf114 media: imx-jpeg: notify source chagne event when the first picture parsed - 913125c13d0a8d LF-9420: drm/imx: imx93-ldb: filter out modes with unobtainable pixel clocks - 870b422ad2a9ff tee: crypto: enable support for skcipher - 65017d1e16f68c LF-10156-3 arm64: dts: imx93-14x14-evk: add different usdhc pinctrl for different timing usage - ee40cc461b225e LF-10156-2 arm64: dts: imx93-11x11-evk: add different usdhc pinctrl for different timing usage - 96eac99749f2ad LF-10156-1 arm64: dts: imx93-9x9-qsb: add different usdhc pinctrl for different timing usage - 5e9f2864b8149e LF-9089-02: media: i2c: mt9m114: adjust the output frequency to 72MHz - a17ff549365160 LF-9089-01: media: imx: parallel: fix frame sync issue - 79ff055451c389 LF-10278: firmware: ele-mu: Update SECO_MU_IO_FLAGS_IS_IN_OUT IO buffer setup flag value - a15dbe6a5ed010 LF-10273: Revert "clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz" - a0ea06f9d769bc LF-10269-9: arm64/configs/imx_v8_defconfig: add maxim serdes modules - d7f397d74c39e9 LF-10269-8: dts/arm64: imx93_14x14: add support for Maxim DSI SerDes - e1ff51fa0f455e LF-10269-7: dt-bindings: mfd: add MAX96752 bindings - 22e0eca2eaba06 LF-10269-6: dt-bindings: mfd: add MAX96789 bindings - 4679c4f90240fa LF-10269-5: mfd: add Maxim SerDes link manager layer - 6e64cb512d4aa5 LF-10269-4: drm/bridge: add support for MAX96752 deserializer LVDS bridge - 11d0de6c2a0179 LF-10269-3: drm/bridge: add support for MAX96789 serializer DSI bridge - e4381b5a592054 LF-10269-2: mfd: Add support for MAX96752 deserializer with LVDS support - 0e22ce306a6994 LF-10269-1: mfd: Add support for max96789 MIPI-DSI serializer - 5de87941ffa208 LF-10263 arm64: dts: imx8qm-mek: add pcie wifi WoWLAN support - d7a9444a9b9faa LF-9973-7: arm64: dts: imx93: add fsl,sai-mclk-direction-output - 324dcddd0b7e88 ASoC: soc-pcm.c: Make sure DAI parameters cleared if the DAI becomes inactive - e8c453a27c2cc5 ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated - b7b5600d3032ac ASoC: imx-rpmsg: Set ignore_pmdown_time for dai_link - 5a97a3191f78c5 LF-9910-2: Revert "LF-6278-2: ASoC: fsl_rpmsg: Constrain rates of wm8524 codec" - 2b6f8abd498aa0 LF-9910-1: arm64: dts: imx8m: Let WM8524 driver constrain supported rate - 6bc8fe95112e87 LF-9368: arm64: dts: imx93-11x11-evk-rpmsg: Enable dynamic buffer size for i2c-rpmsg - fc7754fa3680da LF-10141-03 arm64: dts: imx93: Add the 'fsl,ext-reset-output' property for wdog3 - 799ad8d965d755 LF-10141-02 dt-bindings: watchdog: fsl-imx7ulp-wdt: Add 'fsl,ext-reset-output' - f9a7c0d3885289 LF-10141-01 wdog: imx7ulp: Enable wdog int_en bit for watchdog any reset - f3aa2a474474a4 LF-10040-3 arm64: dts: imx93: set the tuning start and tuning step to get a large scan range for tuning - 61bb01d761b12c LF-10040-2 arm64: dts: imx91p: set SION for cmd and data pad of USDHC - b21542b9ad859f LF-10040-1 arm64: dts: imx93: set SION for cmd and data pad of USDHC - 105e6ac6fec162 LF-9994-2 mmc: sdio: hold retuning when sdio device in 1 bit mode - 0c99057c9cee41 LF-9994-1 mmc: sdhci-esdhc-imx: optimize the manual tuing logic to get the best timing - f1e61a61f78a85 LF-10187: arm64: dts: fix mt9m114 can't work with i.MX93-9x9 QSB A2 board - 8f806c65ed2dc3 Bluetooth: btnxpuart: Improve inband Independent Reset handling - a96e855790e145 Bluetooth: btnxpuart: Add support for IW624 chipset - 0a44c11cc589ac Bluetooth: btnxpuart: Remove check for CTS low after FW download - 87ca692a212e0b Bluetooth: btnxpuart: Add support for AW693 chipset - f396642e14cf20 LF-9972 arch: arm64: dts: correct the use of vmmc-supply and mmc-pwrseq for SDIO WiFi - 0629623844cb3d LF-9971 arm64: dts: imx8mq-evk-usd-wifi: improve the wifi support on imx8mq micro-sd connector - 71359278a94c14 LF-10253: vpu: h1: solve encode dead loop - 8c55f5403b10f2 media: imx-jpeg: initiate a drain of the capture queue in dynamic resolution change - be4fc9832a1484 LF-9973-6: arm64: dts: imx91p: add fsl,sai-mclk-direction-output - 08feac38b33193 LF-10193: vpu: hantro_v4l2: initiate a drain of the capture queue in dynamic resolution change - 5fccc09d4f3eea MA-21538-2 clk: imx: clk-imx8qxp: Parent should be initialized earlier than the clock - afc9aa1d39bfe6 MA-21538-1 Revert "clk: imx: scu: add CLK_SET_PARENT_NOCACHE" - e2b3ebd4bce400 MA-21538 Revert "MLK-21052-08 clk: imx: Add CLK_SET_PARENT_NOCACHE" - 6c290f12a0d0d7 ASoC: fsl: imx-pcm-rpmsg: Add SNDRV_PCM_INFO_BATCH flag - 6883469f38256f net/fec-uio: Fixed error handling - c4811209ac7b4b MLK-26147: net: stmmac: dwmac-imx: request high frequency mode - 1d2c633210935f LF-9849-4: net: phy: tja11xx: call resume before soft reset. - aa812cd54534a9 LF-10074: arm64: dts: imx8dxl-evk: correct the ext PHY reset sequence - 8c96c3b2de12a8 Merge tag 'v6.1.55' into lf-6.1.y - 3f83ccf0d6cd2f Merge tag 'v6.1.54' into lf-6.1.y - 15a1048dde46a1 Revert "ASoC: fsl_sai: Disable bit clock with transmitter" - 81c8834630b2b1 Revert "media: amphion: Fix firmware path to match linux-firmware" - 355b08d35dfbac LF-9973-5: arm64: dts: imx8mp: add fsl,sai-mclk-direction-output - 7d2c024a1d7d00 LF-9973-4: arm64: dts: imx93: add fsl,sai-mclk-direction-output - 489f283b9bf713 LF-9973-3: arm64: dts: imx8mp: add fsl,sai-mclk-direction-output - f094a505b8c3d4 LF-9973-2: arm64: dts: imx8mn: add fsl,sai-mclk-direction-output - 0ceff7021fa6a2 LF-9973-1: arm64: dts: imx8mm: add fsl,sai-mclk-direction-output - fc07cd2af34700 Merge tag 'v6.1.53' into lf-6.1.y Signed-off-by: Ricardo Salveti <[email protected]>
- Loading branch information
1 parent
3c15b8d
commit 85c2427