Fixed broken URLs and mentions of old organization

chart/flux/README.md

@@ -7,7 +7,7 @@ configuration based on that (and a configurable policy).
 
 ## Introduction
 
-This chart bootstraps a [Flux](https://github.com/weaveworks/flux) deployment on
+This chart bootstraps a [Flux](https://github.com/fluxcd/flux) deployment on
 a [Kubernetes](http://kubernetes.io) cluster using the [Helm](https://helm.sh) package manager.
 
 ## Prerequisites
@@ -22,7 +22,7 @@ This means fluxd can fail to apply changes to HelmRelease resources.
 ### Helm
 
 Tiller should be running in the cluster, though
-[helm-operator](../../docs/helm-operator/references/operator.md) will wait
+[helm-operator](https://github.com/fluxcd/helm-operator) will wait
 until it can find one.
 
 # Git repo
@@ -32,12 +32,12 @@ until it can find one.
  - Custom Resource namespace reflects where the release should be done.
    Both the Helm release and its corresponding Custom Resource will
    live in this namespace.
- - Example of a test repo: https://github.com/weaveworks/flux-get-started
+ - Example of a test repo: https://github.com/fluxcd/flux-get-started
 
 ## Installation
 
 We put together a simple [Get Started
-guide](../../docs/tutorials/get-started-helm.md) which takes about 5-10 minutes to follow.
+tutorial](https://docs.fluxcd.io/en/latest/tutorials/get-started-helm.html) which takes about 5-10 minutes to follow.
 You will have a fully working Flux installation deploying workloads to your cluster.
 
 ## Installing Flux using Helm
@@ -52,11 +52,11 @@ helm repo add fluxcd https://charts.fluxcd.io
 
 #### To install the chart with the release name `flux`
 
-Replace `weaveworks/flux-get-started` with your own git repository and run helm install:
+Replace `fluxcd/flux-get-started` with your own git repository and run helm install:
 
 ```sh
 $ helm install --name flux \
---set [email protected]:weaveworks/flux-get-started \
+--set [email protected]:fluxcd/flux-get-started \
 --namespace flux \
 fluxcd/flux
 ```
@@ -65,7 +65,7 @@ fluxcd/flux
 
 ```sh
 helm install --name flux \
---set [email protected]:weaveworks/flux-get-started \
+--set [email protected]:fluxcd/flux-get-started \
 --set token=YOUR_WEAVE_CLOUD_SERVICE_TOKEN \
 --namespace flux \
 fluxcd/flux
@@ -76,14 +76,14 @@ fluxcd/flux
 Apply the Helm Release CRD:
 
 ```sh
-kubectl apply -f https://raw.githubusercontent.com/weaveworks/flux/master/deploy-helm/flux-helm-release-crd.yaml
+kubectl apply -f https://raw.githubusercontent.com/fluxcd/flux/helm-0.10.1/deploy-helm/flux-helm-release-crd.yaml
 ```
 
 Install Flux with Helm:
 
 ```sh
 $ helm install --name flux \
---set [email protected]:weaveworks/flux-get-started \
+--set [email protected]:fluxcd/flux-get-started \
 --set helmOperator.create=true \
 --set helmOperator.createCRD=false \
 --namespace flux \
@@ -154,7 +154,7 @@ The [configuration](#configuration) section lists all the parameters that can be
 #### Setup Git deploy
 
 At startup Flux generates a SSH key and logs the public key.
-Find the SSH public key by installing [fluxctl](../../docs/references/fluxctl.md) and
+Find the SSH public key by installing [fluxctl](https://docs.fluxcd.io/en/latest/references/fluxctl.html) and
 running:
 
 ```sh

chart/flux/templates/NOTES.txt

@@ -3,7 +3,7 @@ Get the Git deploy key by either (a) running
   kubectl -n {{ .Release.Namespace }} logs deployment/{{ .Release.Name }} | grep identity.pub | cut -d '"' -f2
 
 or by (b) installing fluxctl through
-https://github.com/weaveworks/flux/blob/master/docs/references/fluxctl.md#installing-fluxctl
+https://docs.fluxcd.io/en/latest/references/fluxctl.html#installing-fluxctl
 and running:
 
   fluxctl identity

daemon/errors.go

@@ -28,14 +28,14 @@ giving this error:
 Check that any files mentioned are well-formed, and resources are not
 defined more than once. It's also worth reviewing
 
-    https://github.com/weaveworks/flux/blob/master/docs/requirements.md
+    https://docs.fluxcd.io/en/latest/requirements.html
 
 to make sure you're not running into any corner cases.
 
 If you think your files are all OK and you are still getting this
 message, please log an issue at
 
-    https://github.com/weaveworks/flux/issues
+    https://github.com/fluxcd/flux/issues
 
 and include the problematic file, if possible.
 `,

docs/references/fluxyaml-config-files.md

@@ -26,7 +26,7 @@ Flux performs two types of actions on raw manifest files from the Git repository
 
 1. Read manifest files when performing a sync operation (i.e making sure that the status of the cluster reflects what's
    in the manifest files, adjusting it if necessary)
-2. Update the manifest files of [workload](https://github.com/fluxcd/flux/blob/master/docs/using/fluxctl.md#what-is-a-workload).
+2. Update the manifest files of [workload](./fluxctl.md#what-is-a-workload).
    Specifically, flux can update:
     * container images, when releasing a new image version. A release can happen manually or automatically, when a new
       container image is pushed to a repository.

git/errors.go

@@ -16,7 +16,7 @@ We need to clone a git repo to proceed, and you haven't supplied
 one. Please upload a config file, including a git repository URL, as
 described in
 
-    https://github.com/weaveworks/flux/blob/master/docs/references/fluxctl.md
+    https://docs.fluxcd.io/en/latest/references/fluxctl.html
 
 `,
 }

install/templates/flux-deployment.yaml.tmpl

@@ -36,7 +36,7 @@ spec:
       # file, which you will need to do if you host your own git
       # repo rather than using github or the like. You'll also need to
       # mount it into the container, below. See
-      # https://github.com/weaveworks/flux/blob/master/docs//guides/use-private-git-host.md
+      # https://docs.fluxcd.io/en/latest/guides/use-private-git-host.html
       # - name: ssh-config
       #   configMap:
       #     name: flux-ssh-config

internal_docs/releasing.md

@@ -71,7 +71,7 @@ change.
 
 **Creating the release**
 
-8. [Create a release in GitHub](https://github.com/weaveworks/flux/releases/new)
+8. [Create a release in GitHub](https://github.com/fluxcd/flux/releases/new)
 
     Use a tag name as explained above; semver for the Flux daemon, `helm-` then the semver for the Helm operator.
 

release/errors.go

@@ -14,14 +14,14 @@ func MakeReleaseError(err error) *fluxerr.Error {
 This may be because of a limitation in the formats of file Flux can
 deal with. See
 
-    https://github.com/weaveworks/flux/blob/master/docs/requirements.md
+    https://docs.fluxcd.io/en/latest/requirements.html
 
 for those limitations.
 
 If your files appear to meet the requirements, it may simply be a bug
 in Flux. Please report it at
 
-    https://github.com/weaveworks/flux/issues
+    https://github.com/fluxcd/flux/issues
 
 and try to include the problematic manifest, if it can be identified.
 `,

remote/errors.go

@@ -22,11 +22,11 @@ and try the operation again.
 Otherwise, please consult the installation instructions in our
 documentation:
 
-    https://github.com/weaveworks/flux/blob/master/docs/get-started/index.rst
+    https://docs.fluxcd.io/en/latest/get-started/
 
 If you are still stuck, please log an issue:
 
-    https://github.com/weaveworks/flux/issues
+    https://github.com/fluxcd/flux/issues
 
 `,
 		Err: err,
@@ -89,11 +89,11 @@ Otherwise, it is likely to be an ongoing problem until fluxd is
 updated and/or redeployed. For help, please consult the installation
 instructions:
 
-    https://github.com/weaveworks/flux/blob/master/docs/install/index.md
+    https://docs.fluxcd.io/en/latest/get-started/
 
 If you are still stuck, please log an issue:
 
-    https://github.com/weaveworks/flux/issues
+    https://github.com/fluxcd/flux/issues
 
 `,
 		Err: err,