The PJSIP-libraries are not part of Debian 10 anymore and I did not want to compile them myself.
I now use a Python script, because nowadays, it is well documented how to control a FritzBox via TR-064.
Have a look at https://gist.github.com/fkusche/9fb495dd67c047d6b5a7e2241833e95b
Rings a phone via SIP (e.g. FRITZ!Box)
This program registers with a SIP registrar, makes a call and then hangs up
Version: dda4a7a (clean)
usage: ringsip [OPTIONS] <registrar> <username> <password> <callee>
registrar: The IP address or host name of the SIP registrar
username: User name for login at the registrar
password: Password for the login
If this starts with '/', the password will be read from that file.
This is the recommended way, because then, the password won't be visible in the task list.
callee: Phone number or sip URI to call
Options:
--duration n: Ring for n seconds (default: 5)
--name str: Use str as caller name
--daemon fifo: Daemonize, in order to actually ring, send a string to the FIFO file.
If you just send newline, it will not change the name.
If you send a text followed by newline, it will change the caller name before ringing.
-v, -vv, -vvv: Little to medium verbosity
-vvvv: Also show SIP messages
-vvvvv, ...: Be very verbose
Examples:
ringsip --name "Hello world" fritz.box 620 secret '**701'
ringsip --duration 20 192.168.0.1 620 secret 01711234567
ringsip 192.168.0.1 620 secret sip:[email protected]
mkfifo /run/ringsip.fifo
ringsip --daemon /run/ringsip.fifo 192.168.0.1 620 /etc/ringsip.password **701
Currently, only Debian Jessie and Stretch are tested.
In order to build, do the following:
sudo apt-get install libpjproject-dev libsrtp-dev
make
make install will copy the executable to /opt/ringsip/bin, but you can copy it wherever you want.
If you want to run ringsip as a service, you can create a file called /etc/systemd/system/ringsip.service
with contents like this:
[Unit]
Description=RingSIP
After=network-online.target
[Service]
ExecStartPre=-/usr/bin/mkfifo /run/ringsip.fifo
ExecStart=/opt/ringsip/bin/ringsip --daemon /run/ringsip.fifo --duration 8 192.168.0.1 620 /my/file/with/sip-password **701
Type=simple
#User=foo
#Group=bar
[Install]
WantedBy=multi-user.target
There are also alternatives:
- https://ct.de/ytg8 - ESP8266 board which rings via Wifi and TR-064
- https://www.mikrocontroller.net/topic/442157 (Arduino and SIP INVITE - but I did not have a closer look, yet)
- https://www.mikrocontroller.net/topic/444994 (dito)