You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
* Add Timing Receiver (Simulation)
Implements fair-acc/opendigitizer#31
* Implement UDP Timing Receiver using ZeroMQ RADIO/DISH
* digitizers: Implement new timing trigger logic
Add message input port to digitizers, which is used to connect WR
digitizers (or simulators) and add timing trigger tags to the data
stream.
If the digitizer has a trigger input port (digital or analog)
configured, the detected edges are used together with the timing
messages to generate the tags. If no such port is configured,
the latest timing message is used.
Also removed the time_realignment block, under the assumption that
it is not used anymore in the new architecture, and replaced the old
trigger tag usage in other blocks with the new format.
* CI: Enable GCC 12
See if this helps with some fmt error failing to format std::chrono::duration.
* Remove offset/timestamp adjustment for rapid mode
* Test for trigger tags in rapid block mode
* Fix trigger offset in rapid block mode
The offset must be adjusted for the presamples
* meson: add libpico dependencies
libpicoscope depends on libusb and libz, this explicitly resolves these
dependencies in the buildsystem.
* CI: Add libusb-1.0-dev as picoscope dependency
Co-authored-by: Alexander Krimm <[email protected]>
No description provided.
The text was updated successfully, but these errors were encountered: