Skip to content
This repository has been archived by the owner on Jun 4, 2022. It is now read-only.

Latest commit

 

History

History
executable file
·
50 lines (42 loc) · 1.14 KB

README.MD

File metadata and controls

executable file
·
50 lines (42 loc) · 1.14 KB
Raw

Description:

This is a code example demonstrating FLIR Boson camera command and control using Boson SDK commands. It's written for interface with a Linux system and performs the following commands in sequential order:

  • Connects to the camera
  • Reads and displays the Camera Serial Number
  • Reads and changes the bit depth of the output
  • Reads and displays the current Software Revision of the Camera
  • Reads and displays the Sensor Part Number
  • Reads data from the Camera Flash
  • Gets the current Frame Count
  • Changes the FFCMode to Manual, then back again
  • Performs a manual FFC

To compile

First, compile by running

./build.sh

To run:

Run example_linux in the examples directory after compiling.

Obtain processor temperature

./examples/boson_cpu_temp

Obtain sensor temperature

./examples/boson_fpa_temp

Run multiple examples

./example_linux

Build Notes

This was built on tested with Boson SDK rev 2.0.5. 2.0.5 is included, but the latest SDK can be found at https://www.flir.com/support/products/boson#Resources