Adds missing pinMode (#8312)

* Adds missing pinMode

The example code lacks a pinMode() to initialize the GPIO 0 (button). In Arduino Core 3.0.0, it prints an error message when trying to read a not initialized GPIO.

* Update KeyboardLogout.ino

Adds <buttonPin> to keep code standard

* Update KeyboardReprogram.ino

Adds <buttonPin> to keep code standard

libraries/USB/examples/CompositeDevice/CompositeDevice.ino

@@ -166,6 +166,8 @@ void setup() {
   HWSerial.begin(115200);
   HWSerial.setDebugOutput(true);
 
+  pinMode(buttonPin, INPUT_PULLUP);
+
   USB.onEvent(usbEventCallback);
   USBSerial.onEvent(usbEventCallback);
   MSC_Update.onEvent(usbEventCallback);

libraries/USB/examples/Keyboard/KeyboardLogout/KeyboardLogout.ino

@@ -41,16 +41,18 @@ USBHIDKeyboard Keyboard;
 // change this to match your platform:
 int platform = OSX;
 
+const int buttonPin = 0;          // input pin for pushbutton
+
 void setup() {
   // make pin 0 an input and turn on the pull-up resistor so it goes high unless
   // connected to ground:
-  pinMode(0, INPUT_PULLUP);
+  pinMode(buttonPin, INPUT_PULLUP);
   Keyboard.begin();
   USB.begin();
 }
 
 void loop() {
-  while (digitalRead(0) == HIGH) {
+  while (digitalRead(buttonPin) == HIGH) {
     // do nothing until pin 2 goes low
     delay(500);
   }

libraries/USB/examples/Keyboard/KeyboardReprogram/KeyboardReprogram.ino

@@ -34,6 +34,8 @@ void loop(){}
 #include "USBHIDKeyboard.h"
 USBHIDKeyboard Keyboard;
 
+const int buttonPin = 0;          // input pin for pushbutton
+
 // use this option for OSX.
 // Comment it out if using Windows or Linux:
 char ctrlKey = KEY_LEFT_GUI;
@@ -45,14 +47,14 @@ char ctrlKey = KEY_LEFT_GUI;
 void setup() {
   // make pin 0 an input and turn on the pull-up resistor so it goes high unless
   // connected to ground:
-  pinMode(0, INPUT_PULLUP);
+  pinMode(buttonPin, INPUT_PULLUP);
   // initialize control over the keyboard:
   Keyboard.begin();
   USB.begin();
 }
 
 void loop() {
-  while (digitalRead(0) == HIGH) {
+  while (digitalRead(buttonPin) == HIGH) {
     // do nothing until pin 0 goes low
     delay(500);
   }