update spelling in documentation

docs/about.md

@@ -5,8 +5,8 @@ You are welcome [dcspy discord](https://discord.gg/SP5Yjx3) server.
 # Change Log
 [Version changes](https://github.com/emcek/dcspy/blob/master/CHANGELOG.md)
 
-# Secuirity
-[Secuirity information](https://github.com/emcek/dcspy/blob/master/SECURITY.md)
+# Security
+[Security information](https://github.com/emcek/dcspy/blob/master/SECURITY.md)
 
 # License
 [MIT License](https://github.com/emcek/dcspy/blob/master/LICENSE.md)

docs/planes.md

@@ -23,7 +23,7 @@ Apache EUFD is to big to fit small, so is spited into 3 Modes.
 ![AH64DBLKII_49](https://user-images.githubusercontent.com/475312/174405106-68364682-e1e2-4977-b92e-e558cf97d133.png)
 * To enter this mode press **Button4** / **Up**
 * In this mode display warnings, cautions, and advisories,
-* **Button1** / **Left** is used to cycle thru pages of warnings
+* **Button1** / **Left** is used to cycle through pages of warnings
 * Press **Button4** / **Up** again to back to IDM Mode
 
 ### Button Map of EUFD Modes:
@@ -78,10 +78,10 @@ Note: Push **Menu** and **Cancel** toggle cockpit button down, push it again tog
 ![Mi24P_21](https://user-images.githubusercontent.com/475312/215358829-2c3713a5-ecd3-4cae-a59c-c9fdc89c1863.png)
 
 ## F-16C Viper
-* Button1 - IFF MASTER Knob - cycle thru OFF/STBY/LOW/NORM/EMER
-* Button2 - IFF ENABLE Switch - cycle thru M1/M3 /OFF/ M3/MS
-* Button3 - IFF M-4 CODE Switch - cycle thru HOLD/ A/B /ZERO
-* Button4 - IFF MODE 4 REPLY Switch - cycle thru OUT/A/B
+* Button1 - IFF MASTER Knob - cycle through OFF/STBY/LOW/NORM/EMER
+* Button2 - IFF ENABLE Switch - cycle through M1/M3 /OFF/ M3/MS
+* Button3 - IFF M-4 CODE Switch - cycle through HOLD/ A/B /ZERO
+* Button4 - IFF MODE 4 REPLY Switch - cycle through OUT/A/B
 
 ## F-14A and B Tomcat
 * Button1 - RIO CAP Clear

docs/upgrade.md

@@ -1,6 +1,6 @@
 # DCSpy
 ## Single file download (basic/recommended way)
-Just download latest file from [Releases](https://github.com/emcek/dcspy/releases/latest)
+Download latest file from [Releases](https://github.com/emcek/dcspy/releases/latest)
 
 ## via uv (advanced way)
 To upgrade DCSpy to the latest version, open Command Prompt and type:
@@ -23,5 +23,5 @@ If you have enable `Auto check DCS-BIOS` you do not need any manual steps. Every
 1. Stop DCS World or at least exit mission.
 2. Make sure setting **DCS-BIOS folder** is correct
 3. Click **Check for updates** button in DCS-BIOS group, Note, new version in footer.
-5. Click OK.
+4. Click OK.
 ![image](https://github.com/emcek/dcspy/assets/475312/187f9d91-5464-4560-9308-405e37816562)

docs/usage.md

@@ -1,7 +1,7 @@
 # Starting
 ## Single file download (basic way)
 1. Run Logitech Gaming Software (it allows accessing LCD)
-2. Double click at downloaded file.
+2. Double click at the downloaded file.
 3. Click `Start`
 4. LCD should update with dcspy basic info, waiting to connect to DCS
 5. Run DCS and start any mission.
@@ -11,38 +11,38 @@
 2. You can check with `uv` install tool inside user directory like `C:\Users\<username>\AppData\Local\uv\tools\dcspy\Scripts`
 3. You can drag and drop `dcspy.exe` or `dcspy_cli.exe` to desktop and make shortcut (with custom icon, you can find icon in installation directory i.e. `C:\Users\mplic\AppData\Local\uv\tools\dcspy\Lib\site-packages\dcspy\img`).
    * `dcspy.exe` - with open directly GUI window
-   * `dcspy_cli.exe` - additionally start console window (with logs)
+   * `dcspy_cli.exe` - additionally start a console window (with logs)
 4. Double-click on dcspy icon or type `dcspy.exe`\`dcspy_cli.exe` from Command Prompt
 5. Click `Start`
 6. LCD should update with dcspy basic info, waiting to connect to DCS
 7. Run DCS and start any mission.
 
 **Note:** DCS can already running, before starting LGS and or DCSpy.
 
-**Note:** If you upgrade DCSpy before version 1.7.0 `dcspy.ico` and `config.yaml` were in data directory like `c:\python312\dcspy_data\` but location is deperched in Python if you still have it, you can safely delete it
+**Note:** If you upgrade DCSpy before version 1.7.0 `dcspy.ico` and `config.yaml` were in data directory like `c:\python312\dcspy_data\` but location is deprecated in Python if you still have it, you can safely delete it
 
 # Mono vs. Color
 DCSpy do not use full potential of G19, which support full RGBA, 8-lines LCD.
 In contrast to mono devices (like G13, G15 and G510), which support mono, 4-lines LCD.
 
 ## LCD buttons
-G19 has 7  buttons.
+G19 has 7 buttons.
 In contrast to mono devices (like G13, G15 and G510) has only 4 buttons.
-Way in which actions assign to button for G13 (4 buttons form left to right) are mapped to G19 looks:
+Way in which actions assign to button for G13 (four buttons form left to right) are mapped to G19 looks:
 * G13 1st button -> G19 left button
 * G13 2nd button -> G19 right button
 * G13 3rd button -> G19 down button
 * G13 4th button -> G19 up button
 
-Right now LCD buttons are hardcoded in DCSpy and its function depends on currently loaded aircraft. This will change in future.
+Right now LCD buttons are hardcoded in DCSpy and its function depends on currently loaded aircraft. This will change in the future.
 
 ## G13, G15, G510 - Mono
-mono, 4-lines LCD with only 4 buttons
+mono, 4-lines LCD with only four buttons
 ![image](https://user-images.githubusercontent.com/475312/174407168-7db23a3f-3493-4a35-b898-ebb3a3ff839f.png)
 ![image](https://user-images.githubusercontent.com/475312/174407442-ed9c7d85-057d-4572-8316-3578721e4dab.png)
 ![image](https://user-images.githubusercontent.com/475312/174407530-b010691c-0895-4786-ad4e-8f98deeebb02.png)
 ## G19 - Color
-full RGBA, 8-lines LCD with 7 buttons
+full RGBA, 8-lines LCD with seven buttons
 ![image](https://user-images.githubusercontent.com/475312/174407299-d07e7ba5-d837-4af4-884a-7e20a48d676a.png)
 
 ## G-keys
@@ -53,26 +53,26 @@ From DCSpy 3.0 it is possible to use all keyboard's G-Keys:
 * G15 v2 - 6 keys
 * G13 - 29 keys
 
-You can assign almost any input controller from cockpit for aircraft supported by DCS-BIOS. Note: DCS-BIOS has to provide input protocol.
+You can assign almost any input controller from a cockpit for aircraft supported by DCS-BIOS. Note: DCS-BIOS has to provide input protocol.
 
-### How to setup:
+### How-to setup:
 * Install Git: https://git-scm.com/download/win (any 64-Bit, default options should be fine)
 * Set **DCS-BIOS** folder
   ie. (D:/Users/wags/Saved Games/DCS.openbeta/Scripts/DCS-BIOS)
 * Set checked **Use live DCS-BIOS version** (can take 20+ sec)
 * Click **Start** and then **Stop** (in rare cases is needed)
-* Open LGS, new profile should be added (current dcspy file name: ie. dcspy_cli_3.0.0)
+* Open LGS, new profile should be added (current dcspy file name: i.e., dcspy_cli_3.0.0)
 ![image](https://github.com/emcek/dcspy/assets/475312/3145510c-ad8b-4fca-8fe6-596129d9a755)
 * Set this profile default and optionally persistent. Close LGS.
 ![image](https://github.com/emcek/dcspy/assets/475312/c56f61fb-bafb-4fd2-a2a9-549b5b1be990)
 * Go to **G-Keys** tab, additionally turn on **View** / **Show G-Keys** extra dialog
-* Select plane from combo box up right corner
+* Select plane from combo box in upright corner
 * assign any controllers to G-Key/Modes
 * Use save icon to save plane configuration
 
 # Configuration
-All settings can be configured directly via GUI. However,  more advanced users can change configuration file `config.yaml` file. It is located in user's AppData directory (e.g. `C:\Users\<user_name>\AppData\Local\dcspy\config.yaml`).
-This is simple file, most users do not need to touch it at all. Configuring DCSpy enable some powerful features of DCSpy.
+All settings can be configured directly via GUI. However, more advanced users can change configuration file `config.yaml` file. It is located in user's AppData directory (e.g. `C:\Users\<user_name>\AppData\Local\dcspy\config.yaml`).
+This is a simple file, most users do not need to touch it at all. Configuring DCSpy enable some powerful features of DCSpy.
 
 ## Keyboards
 ![image](https://github.com/emcek/dcspy/assets/475312/3be6a62f-029e-43a2-b6ab-b2d4e06e8e9b)
@@ -87,14 +87,14 @@ This is simple file, most users do not need to touch it at all. Configuring DCSp
 ### DCSpy
 * **autostart** - when set to `true` DCSpy start automatically.
   *possible values*: `true` or `false`
-* **show_gui** - it allows showing or hiding GUI during start of DCSpy. When set to `false` DCSpy start automatically.
+* **show_gui** - it allows showing or hiding GUI during the start of DCSpy. When set to `false` DCSpy start automatically.
   *possible values*: `true` or `false`
 * **check_ver** - check for new version during start of DCSpy.
   *possible values*: `true` or `false`
 * **dcs** - installation directory of DCS. By default it is set to `C:\Program Files\Eagle Dynamics\DCS World OpenBeta`
 
 ### DCS-BIOS
-* **check_bios** - check for new version of DCS-BIOS during start of DCSpy.
+* **check_bios** - check for a new version of DCS-BIOS during the start of DCSpy.
   *possible values*: `true` or `false`
 * **git_bios** - If set to `True` Git/Live version of DCS-BIOS with be used
   *possible values*: `true` or `false`
@@ -105,10 +105,10 @@ This is simple file, most users do not need to touch it at all. Configuring DCSp
   *example value*: `D:\Users\wags\Saved Games\DCS.openbeta\Scripts\DCS-BIOS`
 
 ### Fonts
-* **font_mono_xs** - size of extra small font for mono devices
+* **font_mono_xs** - size of extreme small font for mono devices
 * **font_mono_s** - size of small font for mono devices
 * **font_mono_l** - size of large font for mono devices
-* **font_color_xs** - size of extra small font for color devices
+* **font_color_xs** - size of extreme small font for color devices
 * **font_color_s** - size of small font for color devices
 * **font_color_l** - size of large font for color devices
 * **font_name** - file name with TrueType font use in all devices