Black screen on RG280V #227
Replies: 7 comments 16 replies
-
|
Just want to rule out the obvious... although I don't think this is the issue as you've tested working cards from your buddy's device... BUT after flashing the image have you ran the Sounds like a hardware/graphics issue, but strange as to why it would only affect Adam Image. Perhaps @eduardofilo will have some suggestions. As it's powering off with
When you say |
Beta Was this translation helpful? Give feedback.
-
|
Yep, no worries... I did run the .bat file and choose option 1. I hadn't thought to try the brightness shortcuts but those do work as well. The backlight gets brighter/dimmer but still just a black screen unfortunately. I'm running original OD but I'm going to try ODBeta now. |
Beta Was this translation helpful? Give feedback.
-
|
Well, it is perfectly possible for a piece of hardware to work well with one system and not work or behave differently with another, since they may be governed differently. But if you have selected the correct console in the kernel selection script and/or if it doesn't work with your buddy's cards, it seems clear that your display has some kind of marginality and doesn't suit ODbeta's way of governing it. Think that this screen is probably tested at the Anbernic factory with a stock kernel. |
Beta Was this translation helpful? Give feedback.
-
|
That's kind of the conclusion that reddit came to. Might just be a batch with screens that don't play well with Adam for whatever reason. I'm about to try the OD Beta image to see if I have any luck with that out of curiosity. |
Beta Was this translation helpful? Give feedback.
-
|
Yep, same issue with ODBeta. I was able to flash a new card with the OD original image, booted to that no problem, ran the ODBeta update, rebooted, and now I'm back at the black screen. I guess I'm just lucky and got a special screen. Lucky me! :D I ordered another 280V from a different shop so if the replacement works I'll send this one back. |
Beta Was this translation helpful? Give feedback.
-
|
Sorry to hear that! I hope your new 280V works perfectly and you get to enjoy the Adam Image |
Beta Was this translation helpful? Give feedback.
-
|
Eh, it happens. Either way thanks for trying to help! Hopefully the replacement will be good to go. I've heard really good things about Adam Image so I'm excited to give it a shot! Thanks again! |
Beta Was this translation helpful? Give feedback.
-
|
Just to give an update... Got the replacement unit in and it boots to the flashed SD no problem. Boxing the other up and shipping it back. This really is so much better than the stock OS. Thanks again! |
Beta Was this translation helpful? Give feedback.
-
|
Excellent news. Happy Gaming! |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
@ebzero Did you try any of the things we suggested? Can you confirm you ran the kernel selection script after flashing the image and before inserting in the device? Have you confirmed your device works with OpenDingux-Beta rather than the default OpenDingux? You can get the stock OpenDingux image and the ODBeta upgrade HERE |
Beta Was this translation helpful? Give feedback.
-
|
I definitely ran the kernel selection script. The out-of-the-box firmware that came with the device also worked fine. Unfortunately, I decided to get rid of the device so I can't investigate any further. |
Beta Was this translation helpful? Give feedback.
-
|
Sorry to hear that! Did you opt for a different emulation device instead? If so, what did you go for? |
Beta Was this translation helpful? Give feedback.
-
|
Miyoo Mini! |
Beta Was this translation helpful? Give feedback.
-
|
Nice choice... I nearly bought one recently. Lovely looking device and I love that it's the same dimensions as a pack of playing cards, so there are plenty of carrying cases that'll fit perfectly. Happy gaming! |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I'm having the exact same issue with the RG350P. I have tried all Adam releases. I also have tried several SD cards, and I have ran the .bat. Same black screen at the beginning. I haven't tried the OD Beta, I will do that |
Beta Was this translation helpful? Give feedback.
-
|
In your case, also try selecting the RG350M model in the system selection script, as there are many cases of RG350P's with the RG350M screen fitted at the factory. |
Beta Was this translation helpful? Give feedback.
-
|
It worked! Thanks a lot!!! I selected RG350M and it worked! |
Beta Was this translation helpful? Give feedback.
-
|
Hi, thanks a lot, i will try this evening and give you a feedback
…On Mon, Oct 10, 2022 at 4:47 PM Eduardo Moreno ***@***.***> wrote:
In your case, also try selecting the RG350M model in the system selection
script, as there are many cases of RG350P's with the RG350M screen fitted
at the factory.
—
Reply to this email directly, view it on GitHub
<#227 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A3PBJRNEXNY3UF4ENKA27EDWCQM6DANCNFSM5Q5GLEZQ>
.
You are receiving this because you commented.Message ID:
***@***.***
.com>
--
Best regards,
Aimilios Mouratis
M: 6942463571
|
Beta Was this translation helpful? Give feedback.
-
I've tried flashing my new RG280V but it only boots to a black backlit screen. I've tried a number of different SD cards and different versions of adam image. The folder structure is created on the 2nd SD card at boot so something is happening. I can also power it off using Start + A.
Stock image and rogue CFW works absolutely fine.
One step weirder... I have a buddy with a RG280V running adam 1.4. I can take both of his micro SD cards, put them into my RG280V, and I have the same issue. I've seen this issue around other places (reddit, discord) and no one seems to have a solution. Any ideas?
Beta Was this translation helpful? Give feedback.
All reactions