added serialcmds (pr3y#64)

src/main.cpp

@@ -61,6 +61,7 @@ TFT_eSprite draw = TFT_eSprite(&tft);
 #include "wifi_atks.h"
 #include "ble_spam.h"
 #include "openhaystack.h"
+#include "serialcmds.h"
 
 
 #ifdef CARDPUTER
@@ -145,6 +146,11 @@ void setup() {
     if((millis()-i>3400) && (millis()-i)<3600) tft.fillScreen(TFT_BLACK);
     if((millis()-i>3600)) tft.drawXBitmap(1,1,bits, bits_width, bits_height,TFT_BLACK,FGCOLOR);
 
+  //reinit needed?
+  Serial.begin(115200);
+  Serial.println("setup: serial init1");
+  log_d("setup: serial init2");
+
   #if defined (CARDPUTER)   // If any key is pressed, it'll jump the boot screen
     Keyboard.update();
     if(Keyboard.isPressed())
@@ -173,7 +179,11 @@ void loop() {
   int index = 0;
   int opt = 6; // there are 3 options> 1 list SD files, 2 OTA and 3 Config
   tft.fillRect(0,0,WIDTH,HEIGHT,BGCOLOR);
+  log_d("loop");
   while(1){
+    handleSerialCommands();
+    log_d("loop while");
+
     if(returnToMenu) {
       returnToMenu = false;
       tft.fillScreen(BGCOLOR); //fix any problem with the mainMenu screen when coming back from submenus or functions

src/serialcmds.cpp

@@ -0,0 +1,46 @@
+
+#include "serialcmds.h"
+#include "globals.h"
+#include <IRsend.h>
+#include <string>
+#include "TV-B-Gone.h"
+
+
+void handleSerialCommands() {
+  String cmd_str;
+  const int MIN_CMD_LEN = 1;
+
+    if (Serial.available() >= MIN_CMD_LEN) {    
+      cmd_str = Serial.readStringUntil('\n');
+    } else {
+      // try again on next iteration
+      return;
+    }
+
+  log_printf("received: %s\n", cmd_str.c_str());
+
+  // https://docs.flipper.net/development/cli#0Z9fs
+  cmd_str = cmd_str.toLowerCase();
+
+  if(cmd_str.startsWith("ir tx ")){  // ir tx <protocol> <address> <command>
+    // <protocol>: NEC, NECext, NEC42, NEC42ext, Samsung32, RC6, RC5, RC5X, SIRC, SIRC15, SIRC20, Kaseikyo, RCA
+    // <address> and <command> must be in hex format
+    // e.g. ir tx NEC 04000000 08000000
+
+     if(cmd_str.startsWith("ir tx nec ")){
+       String address = cmd_str.substring(10, 8);
+       String command = cmd_str.substring(19, 8);
+       // check if valid address, command
+       sendNECCommand(address, command);
+      log_printf("address: %x\tcommand=%x\n", address, command);
+
+      }
+
+  }
+
+  //if(cmd_str.startsWith("ir tx raw")){
+
+
+
+}
+

src/serialcmds.h

@@ -0,0 +1,3 @@
+
+
+void handleSerialCommands();