This is an exporter that exposes information gathered from SNMP for use by the Prometheus monitoring system.
go get -d
go build./snmp_exporter
Visit http://localhost:9116/snmp?target=1.2.3.4 where 1.2.3.4 is the IP of the
SNMP device to get metrics from. You can also specify a module parameter, to
choose which module to use from the config file.
###SNMPv2
The default configuration is to use SNMPv2 with the community public. This can be changed in the yaml config. NOTE: Version 2 implies SNMP version 2c.
####Authentication parameters
| Name | Description |
|---|---|
| community | Community string defined on the device |
Example:
default:
version: 2
auth:
community: SomeCommunityString
walk:
- ...
metrics:
- ...###SNMPv1
For SNMPv1, the authentication also requires a community string which will default to 'public'.
####Authentication parameters
| Name | Description |
|---|---|
| community | Community string defined on the device |
Example:
default:
version: 1
auth:
community: SomeCommunityString
walk:
- ...
metrics:
- ...##SNMPv3
For SNMPv3, the authentication requires different parameters. The auth_protocol defaults to MD5 and the priv_protocol defaults to DES. The security_level defaults to noAuthNoPriv.
####Authentication parameters
| Name | Description | required |
|---|---|---|
| username | A string representing the name of the user | yes |
| password | If messages sent on behalf of this user can be authenticated, the (private) authentication key for use with the authentication protocol. Defined as authKey in RFC3414 | if security_level = authNoPriv or authPriv |
| auth_protocol | An indication of whether messages sent on behalf of this user can be authenticated, and if so, the type of authentication protocol which is used. 2 protocols are defined in RFC3414: MD5 (HMAC-MD5-96) and SHA (HMAC-SHA-96) | if security_level = authNoPriv or authPriv |
| priv_protocol | An indication of whether messages sent on behalf of this user can be protected from disclosure, and if so, the type of privacy protocol which is used. Only one protocol is defined in RFC3414: DES (CBC-DES Symmetric Encryption Protocol) | if security_level = authPriv |
| security_level | The Level of Security from which the User-based Security module determines if the message needs to be protected from disclosure and if the message needs to be authenticated. | yes (see security settings under table) |
| priv_password | If messages sent on behalf of this user can be en/decrypted, the (private) privacy key for use with the privacy protocol. Defined as privKey in RFC3414 | if security_level = authPriv |
Security_level has 3 settings:
- noAuthNoPriv: no authentication or privacy
- authNoPriv: user authentication, without privacy
- authPriv: user authentication and privacy
Example:
default:
version: 3
auth:
username: SomeUser
password: TotallySecret
auth_protocol: SHA
priv_protocol: AES
security_level: SomethingReadOnly
priv_password: SomeOtherSecret
walk:
- ...
metrics:
- ...The snmp exporter needs to be passed the address as a parameter, this can be done with relabelling.
Example config:
scrape_configs:
- job_name: 'snmp'
target_groups:
- targets:
- 192.168.1.2 # SNMP device.
metrics_path: /snmp
params:
module: [default]
relabel_configs:
- source_labels: [__address__]
target_label: __param_target
- source_labels: [__param_target]
target_label: instance
- target_label: __address__
replacement: 127.0.0.1:9116 # SNMP exporter.This setup allows Prometheus to provide scheduling and service discovery, as unlike all other exporters running an exporter on the machine from which we are getting the metrics from is not possible.
There are two components. An exporter that does the actual scraping, and a generator that creates the configuration for use by the exporter. Only the exporter is written so far.
This is to allow for customisation of what's done during the scrape as many special cases are expected. The varying levels of SNMP MIB-parsing support across different languages also means that a single language may not be practical.