DYN-6009-Extended-Node-Help-Missing 6th (DynamoDS#14602)

doc/distrib/NodeHelpFiles/Autodesk.DesignScript.Geometry.Cone.ByPointsRadius.md

@@ -1,5 +1,8 @@
 ## In Depth
-ByPointsRadius will return a Cylinder from a start Point, end Point, and radius value. In the example below, adjusting the number sliders will change the point positions as well as the Cylinder's radius.
+`Cone.ByPointsRadius` creates a cone geometry from a start point, end point, and a radius value. 
+
+In the example below, a dynamic cone around the World Origin is constructed with two number sliders controlling the cone’s height and radius.
+
 ___
 ## Example File
 

doc/distrib/NodeHelpFiles/Autodesk.DesignScript.Geometry.Cone.EndPoint.md

@@ -1,5 +1,8 @@
 ## In Depth
-End Point will return the end point of an input curve. In the example below, we first create a Nurbs Curve using a ByControlPoints node, with a set of randomly generated points as the input. We can find the end point of this curve by using an EndPoint node.
+`Cone.EndPoint` returns the apex of a cone, or the center of the top circle of a truncated cone. 
+
+In the example below, we create a cone by specifying a Coordinate System and two radii. We then use `Cone.EndPoint` to find the center of the top circle of the cone.
+
 ___
 ## Example File
 

doc/distrib/NodeHelpFiles/Autodesk.DesignScript.Geometry.Cone.Height.md

@@ -1,5 +1,8 @@
 ## In Depth
-Text note height is returned as a double. The height value is relative to the view scale.
+`Cone.Height` finds the height of a cone, which is equal to the distance between its start point and end point. 
+
+In the example below, we create a cone by specifying a start and end point, as well as a start and end radius. We can then extract the height of the cone with `Cone.Height`.
+
 ___
 ## Example File
 

doc/distrib/NodeHelpFiles/Autodesk.DesignScript.Geometry.Cone.StartPoint.md

@@ -1,5 +1,8 @@
 ## In Depth
-Start Point will return the start point of an input curve. In the example below, we first create a Nurbs Curve using a ByControlPoints node, with a set of randomly generated points as the input. We can find the start point of this curve by using a StartPoint node.
+`Cone.StartPoint` finds the center of the base of a cone. 
+
+In the example below, we create a cone by specifying a Coordinate System and two radii. We then use `Cone.StartPoint` to find the center of the bottom circle of the cone.
+
 ___
 ## Example File
 

doc/distrib/NodeHelpFiles/Autodesk.DesignScript.Geometry.Cuboid.Height.md

@@ -1,5 +1,8 @@
 ## In Depth
-Text note height is returned as a double. The height value is relative to the view scale.
+`Cuboid.Height` returns the height of the input cuboid. Note that if the cuboid has been transformed to a different coordinate system with a scale factor, this will return the original dimensions of the cuboid, not the world space dimensions. In other words, if you create a cuboid with a width (X-axis) of 10 and transform it to a CoordinateSystem with 2 times scaling in X, the width will still be 10. 
+
+In the example below, we generate a cuboid by corners, and then use a `Cuboid.Height` node to find its height. 
+
 ___
 ## Example File
 

doc/distrib/NodeHelpFiles/Autodesk.DesignScript.Geometry.Cuboid.Length.md

@@ -1,5 +1,8 @@
 ## In Depth
-Length returns the length of a curtain panel's boundary as a double. This can be used even if the curtain panel is not rectangular.
+`Cuboid.Length` returns the length of the input cuboid. Note that if the cuboid has been transformed to a different coordinate system with a scale factor, this will return the original dimensions of the cuboid, not the world space dimensions.
+
+In the example, we generate a cuboid by corners, and then use a `Cuboid.Length` node to find the length.
+
 ___
 ## Example File
 

doc/distrib/NodeHelpFiles/Autodesk.DesignScript.Geometry.Cuboid.Width.md

@@ -1,5 +1,8 @@
 ## In Depth
-Width returns the horizontal dimension of a rectangular curtain panel as a double.
+`Cuboid.Width` returns the width of the input cuboid. 
+
+In the example below, we generate a cuboid by corners, and then use a `Cuboid.Width` node to find its width. Note that if the cuboid has been transformed to a different coordinate system with a scale factor, this will return the original dimension of the cuboid, not the world space dimensions.
+
 ___
 ## Example File
 

doc/distrib/NodeHelpFiles/Autodesk.DesignScript.Geometry.Cylinder.Height.md

@@ -1,5 +1,8 @@
 ## In Depth
-Text note height is returned as a double. The height value is relative to the view scale.
+`Cylinder.Height` returns the height of the input cylinder. The height value is relative to the view scale.
+
+In the example below, we generate a cylinder by start point, end point, and radius, and then use a `Cylinder.Height` node to find the height.
+
 ___
 ## Example File
 

doc/distrib/NodeHelpFiles/Autodesk.DesignScript.Geometry.Cylinder.Radius.md

@@ -1,5 +1,8 @@
 ## In Depth
-Radius will return the center of an input sphere. In the example below, we use a ByBestFit node to create a sphere based on a set of random points. We then use a Radius node to determine the size of the best fit sphere.
+`Cylinder.Radius` returns the radius of a cylinder as a double. 
+
+In the example below, adjusting the number slider will change the cylinder's radius.
+
 ___
 ## Example File
 

doc/distrib/NodeHelpFiles/Autodesk.DesignScript.Geometry.Geometry.BoundingBox.md

@@ -1,5 +1,8 @@
 ## In Depth
-BoundingBox will create a bounding box in Dynamo around a Revit element.
+`Geometry.BoundingBox` returns a box defined by the geometry it contains. A BoundingBox is not displayed, but it can be returned as a PolySurface by using the `BoundingBox.ToPolySurface` node. 
+
+In the example below, a BoundingBox is created for a unioned solid and represented as a PolySurface.
+
 ___
 ## Example File
 

doc/distrib/NodeHelpFiles/Autodesk.DesignScript.Geometry.Geometry.ExportToSAT(geometry, filePath).dyn

@@ -707,7 +707,7 @@
       "ScaleFactor": 1.0,
       "HasRunWithoutCrash": true,
       "IsVisibleInDynamoLibrary": true,
-      "Version": "2.19.0.5874",
+      "Version": "2.19.4.6632",
       "RunType": "Automatic",
       "RunPeriod": "1000"
     },
@@ -867,8 +867,8 @@
       }
     ],
     "Annotations": [],
-    "X": 33.19331582016116,
-    "Y": -164.55511612426255,
-    "Zoom": 0.612283078543345
+    "X": 84.8489843399085,
+    "Y": -148.87835110848562,
+    "Zoom": 0.62740812659763479
   }
 }

doc/distrib/NodeHelpFiles/Autodesk.DesignScript.Geometry.Geometry.ExportToSAT(geometry, filePath).md

@@ -1,7 +1,8 @@
 ## In Depth
-`ExportToSAT` exports geometry from Dynamo to a SAT file type. 
+`Geometry.ExportToSAT` exports geometry from Dynamo to a SAT file type. This node is unitless; to specify a unit, use `ExportToSAT`.
 
 In the example below, a PolySurface from the intersection of three spheres can be exported to a SAT file once a file path is selected.
+
 ___
 ## Example File
 

doc/distrib/NodeHelpFiles/Autodesk.DesignScript.Geometry.Geometry.FromSolidDef.md

@@ -1,7 +1,8 @@
 ## In Depth
-Imports a JSON string and returns an array of imported geometries.
+`Geometry.FromSolidDef` imports a Solid Def JSON string and returns an array of imported geometries. It converts the JSON formatted representation back into geometry format. Use `Geometry.ToSolidDef` to convert geometries into a JSON string format.
+
+In the example below, a Solid Def representation is converted into geometry.
 ___
 ## Example File
 
-
-
+![Geometry.FromSolidDef](./Autodesk.DesignScript.Geometry.Geometry.FromSolidDef_img.jpg)