feat: Enable Realtek 8822{BU,CU},8723DU,8821CU,8851BE,8852{BE,CE} #24

opsiff · 2023-09-19T02:14:55Z

Enable 8822{BU,CU},8723DU,8821CU,8851BE on x86 desktop

Enable 8822{BU,CU},8723DU,8821CU,8851BE on x86 laptop

Enable 8822{BU,CU},8723DU,8821CU,8851BE,8852{BE,CE} for arm64

After Linux 6.2 release,8822{bu,cu},8723du,8821cu add to upstream driver After Linux 6.5 release,8851be add to upstream driver Default enable them for users.

feat: Enable 8822{BU,CU},8723DU,8821CU,8851BE on x86 desktop After Linux 6.2 release,8822{bu,cu},8723du,8821cu add to upstream driver After Linux 6.5 release,8851be add to upstream driver Default enable them for users.

After Linux 5.19 release,8852ce add to upstream driver After Linux 6.2 release,8822{bu,cu},8723du,8821cu,8852be add to upstream driver After Linux 6.5 release,8851be add to upstream driver Default enable them for users.

deepin-ci-robot · 2023-09-19T02:15:25Z

[APPROVALNOTIFIER] This PR is NOT APPROVED

This pull-request has been approved by:
Once this PR has been reviewed and has the lgtm label, please assign zccrs for approval. For more information see the Code Review Process.

The full list of commands accepted by this bot can be found here.

Needs approval from an approver in each of these files:

debian/deepin/OWNERS

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit c6f4850 ] The current implementation of the mov instruction with sign extension has the following problems: 1. It clobbers the source register if it is not stacked because it sign extends the source and then moves it to the destination. 2. If the dst_reg is stacked, the current code doesn't write the value back in case of 64-bit mov. 3. There is room for improvement by emitting fewer instructions. The steps for fixing this and the instructions emitted by the JIT are explained below with examples in all combinations: Case A: offset == 32: ===================== Case A.1: src and dst are stacked registers: -------------------------------------------- 1. Load src_lo into tmp_lo 2. Store tmp_lo into dst_lo 3. Sign extend tmp_lo into tmp_hi 4. Store tmp_hi to dst_hi Example: r3 = (s32)r3 r3 is a stacked register ldr r6, [r11, #-16] // Load r3_lo into tmp_lo // str to dst_lo is not emitted because src_lo == dst_lo asr r7, r6, deepin-community#31 // Sign extend tmp_lo into tmp_hi str r7, [r11, #-12] // Store tmp_hi into r3_hi Case A.2: src is stacked but dst is not: ---------------------------------------- 1. Load src_lo into dst_lo 2. Sign extend dst_lo into dst_hi Example: r6 = (s32)r3 r6 maps to {ARM_R5, ARM_R4} and r3 is stacked ldr r4, [r11, #-16] // Load r3_lo into r6_lo asr r5, r4, deepin-community#31 // Sign extend r6_lo into r6_hi Case A.3: src is not stacked but dst is stacked: ------------------------------------------------ 1. Store src_lo into dst_lo 2. Sign extend src_lo into tmp_hi 3. Store tmp_hi to dst_hi Example: r3 = (s32)r6 r3 is stacked and r6 maps to {ARM_R5, ARM_R4} str r4, [r11, #-16] // Store r6_lo to r3_lo asr r7, r4, deepin-community#31 // Sign extend r6_lo into tmp_hi str r7, [r11, #-12] // Store tmp_hi to dest_hi Case A.4: Both src and dst are not stacked: ------------------------------------------- 1. Mov src_lo into dst_lo 2. Sign extend src_lo into dst_hi Example: (bf) r6 = (s32)r6 r6 maps to {ARM_R5, ARM_R4} // Mov not emitted because dst == src asr r5, r4, deepin-community#31 // Sign extend r6_lo into r6_hi Case B: offset != 32: ===================== Case B.1: src and dst are stacked registers: -------------------------------------------- 1. Load src_lo into tmp_lo 2. Sign extend tmp_lo according to offset. 3. Store tmp_lo into dst_lo 4. Sign extend tmp_lo into tmp_hi 5. Store tmp_hi to dst_hi Example: r9 = (s8)r3 r9 and r3 are both stacked registers ldr r6, [r11, #-16] // Load r3_lo into tmp_lo lsl r6, r6, deepin-community#24 // Sign extend tmp_lo asr r6, r6, deepin-community#24 // .. str r6, [r11, #-56] // Store tmp_lo to r9_lo asr r7, r6, deepin-community#31 // Sign extend tmp_lo to tmp_hi str r7, [r11, #-52] // Store tmp_hi to r9_hi Case B.2: src is stacked but dst is not: ---------------------------------------- 1. Load src_lo into dst_lo 2. Sign extend dst_lo according to offset. 3. Sign extend tmp_lo into dst_hi Example: r6 = (s8)r3 r6 maps to {ARM_R5, ARM_R4} and r3 is stacked ldr r4, [r11, #-16] // Load r3_lo to r6_lo lsl r4, r4, deepin-community#24 // Sign extend r6_lo asr r4, r4, deepin-community#24 // .. asr r5, r4, deepin-community#31 // Sign extend r6_lo into r6_hi Case B.3: src is not stacked but dst is stacked: ------------------------------------------------ 1. Sign extend src_lo into tmp_lo according to offset. 2. Store tmp_lo into dst_lo. 3. Sign extend src_lo into tmp_hi. 4. Store tmp_hi to dst_hi. Example: r3 = (s8)r1 r3 is stacked and r1 maps to {ARM_R3, ARM_R2} lsl r6, r2, deepin-community#24 // Sign extend r1_lo to tmp_lo asr r6, r6, deepin-community#24 // .. str r6, [r11, #-16] // Store tmp_lo to r3_lo asr r7, r6, deepin-community#31 // Sign extend tmp_lo to tmp_hi str r7, [r11, #-12] // Store tmp_hi to r3_hi Case B.4: Both src and dst are not stacked: ------------------------------------------- 1. Sign extend src_lo into dst_lo according to offset. 2. Sign extend dst_lo into dst_hi. Example: r6 = (s8)r1 r6 maps to {ARM_R5, ARM_R4} and r1 maps to {ARM_R3, ARM_R2} lsl r4, r2, deepin-community#24 // Sign extend r1_lo to r6_lo asr r4, r4, deepin-community#24 // .. asr r5, r4, deepin-community#31 // Sign extend r6_lo to r6_hi Fixes: fc83265 ("arm32, bpf: add support for sign-extension mov instruction") Reported-by: [email protected] Signed-off-by: Puranjay Mohan <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Closes: https://lore.kernel.org/all/[email protected] Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c6f4850 ] The current implementation of the mov instruction with sign extension has the following problems: 1. It clobbers the source register if it is not stacked because it sign extends the source and then moves it to the destination. 2. If the dst_reg is stacked, the current code doesn't write the value back in case of 64-bit mov. 3. There is room for improvement by emitting fewer instructions. The steps for fixing this and the instructions emitted by the JIT are explained below with examples in all combinations: Case A: offset == 32: ===================== Case A.1: src and dst are stacked registers: -------------------------------------------- 1. Load src_lo into tmp_lo 2. Store tmp_lo into dst_lo 3. Sign extend tmp_lo into tmp_hi 4. Store tmp_hi to dst_hi Example: r3 = (s32)r3 r3 is a stacked register ldr r6, [r11, #-16] // Load r3_lo into tmp_lo // str to dst_lo is not emitted because src_lo == dst_lo asr r7, r6, #31 // Sign extend tmp_lo into tmp_hi str r7, [r11, #-12] // Store tmp_hi into r3_hi Case A.2: src is stacked but dst is not: ---------------------------------------- 1. Load src_lo into dst_lo 2. Sign extend dst_lo into dst_hi Example: r6 = (s32)r3 r6 maps to {ARM_R5, ARM_R4} and r3 is stacked ldr r4, [r11, #-16] // Load r3_lo into r6_lo asr r5, r4, #31 // Sign extend r6_lo into r6_hi Case A.3: src is not stacked but dst is stacked: ------------------------------------------------ 1. Store src_lo into dst_lo 2. Sign extend src_lo into tmp_hi 3. Store tmp_hi to dst_hi Example: r3 = (s32)r6 r3 is stacked and r6 maps to {ARM_R5, ARM_R4} str r4, [r11, #-16] // Store r6_lo to r3_lo asr r7, r4, #31 // Sign extend r6_lo into tmp_hi str r7, [r11, #-12] // Store tmp_hi to dest_hi Case A.4: Both src and dst are not stacked: ------------------------------------------- 1. Mov src_lo into dst_lo 2. Sign extend src_lo into dst_hi Example: (bf) r6 = (s32)r6 r6 maps to {ARM_R5, ARM_R4} // Mov not emitted because dst == src asr r5, r4, #31 // Sign extend r6_lo into r6_hi Case B: offset != 32: ===================== Case B.1: src and dst are stacked registers: -------------------------------------------- 1. Load src_lo into tmp_lo 2. Sign extend tmp_lo according to offset. 3. Store tmp_lo into dst_lo 4. Sign extend tmp_lo into tmp_hi 5. Store tmp_hi to dst_hi Example: r9 = (s8)r3 r9 and r3 are both stacked registers ldr r6, [r11, #-16] // Load r3_lo into tmp_lo lsl r6, r6, #24 // Sign extend tmp_lo asr r6, r6, #24 // .. str r6, [r11, #-56] // Store tmp_lo to r9_lo asr r7, r6, #31 // Sign extend tmp_lo to tmp_hi str r7, [r11, #-52] // Store tmp_hi to r9_hi Case B.2: src is stacked but dst is not: ---------------------------------------- 1. Load src_lo into dst_lo 2. Sign extend dst_lo according to offset. 3. Sign extend tmp_lo into dst_hi Example: r6 = (s8)r3 r6 maps to {ARM_R5, ARM_R4} and r3 is stacked ldr r4, [r11, #-16] // Load r3_lo to r6_lo lsl r4, r4, #24 // Sign extend r6_lo asr r4, r4, #24 // .. asr r5, r4, #31 // Sign extend r6_lo into r6_hi Case B.3: src is not stacked but dst is stacked: ------------------------------------------------ 1. Sign extend src_lo into tmp_lo according to offset. 2. Store tmp_lo into dst_lo. 3. Sign extend src_lo into tmp_hi. 4. Store tmp_hi to dst_hi. Example: r3 = (s8)r1 r3 is stacked and r1 maps to {ARM_R3, ARM_R2} lsl r6, r2, #24 // Sign extend r1_lo to tmp_lo asr r6, r6, #24 // .. str r6, [r11, #-16] // Store tmp_lo to r3_lo asr r7, r6, #31 // Sign extend tmp_lo to tmp_hi str r7, [r11, #-12] // Store tmp_hi to r3_hi Case B.4: Both src and dst are not stacked: ------------------------------------------- 1. Sign extend src_lo into dst_lo according to offset. 2. Sign extend dst_lo into dst_hi. Example: r6 = (s8)r1 r6 maps to {ARM_R5, ARM_R4} and r1 maps to {ARM_R3, ARM_R2} lsl r4, r2, #24 // Sign extend r1_lo to r6_lo asr r4, r4, #24 // .. asr r5, r4, #31 // Sign extend r6_lo to r6_hi Fixes: fc83265 ("arm32, bpf: add support for sign-extension mov instruction") Reported-by: [email protected] Signed-off-by: Puranjay Mohan <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Closes: https://lore.kernel.org/all/[email protected] Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 3dd384108d53834002be5630132ad5c3f32166ad ] profile->parent->dents[AAFS_PROF_DIR] could be NULL only if its parent is made from __create_missing_ancestors(..) and 'ent->old' is NULL in aa_replace_profiles(..). In that case, it must return an error code and the code, -ENOENT represents its state that the path of its parent is not existed yet. BUG: kernel NULL pointer dereference, address: 0000000000000030 PGD 0 P4D 0 PREEMPT SMP PTI CPU: 4 PID: 3362 Comm: apparmor_parser Not tainted 6.8.0-24-generic deepin-community#24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Call Trace: <TASK> ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? kernelmode_fixup_or_oops+0xb2/0x140 ? __bad_area_nosemaphore+0x1a5/0x2c0 ? find_vma+0x34/0x60 ? bad_area_nosemaphore+0x16/0x30 ? do_user_addr_fault+0x2a2/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? aafs_create.constprop.0+0x7f/0x130 ? aafs_create.constprop.0+0x51/0x130 __aafs_profile_mkdir+0x3d6/0x480 aa_replace_profiles+0x83f/0x1270 policy_update+0xe3/0x180 profile_load+0xbc/0x150 ? rw_verify_area+0x47/0x140 vfs_write+0x100/0x480 ? __x64_sys_openat+0x55/0xa0 ? syscall_exit_to_user_mode+0x86/0x260 ksys_write+0x73/0x100 __x64_sys_write+0x19/0x30 x64_sys_call+0x7e/0x25c0 do_syscall_64+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7be9f211c574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007ffd26f2b8c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00005d504415e200 RCX: 00007be9f211c574 RDX: 0000000000001fc1 RSI: 00005d504418bc80 RDI: 0000000000000004 RBP: 0000000000001fc1 R08: 0000000000001fc1 R09: 0000000080000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00005d504418bc80 R13: 0000000000000004 R14: 00007ffd26f2b9b0 R15: 00007ffd26f2ba30 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer qrtr snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device i2c_i801 snd_timer i2c_smbus qxl snd soundcore drm_ttm_helper lpc_ich ttm joydev input_leds serio_raw mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs qemu_fw_cfg ip_tables x_tables autofs4 hid_generic usbhid hid ahci libahci psmouse virtio_rng xhci_pci xhci_pci_renesas CR2: 0000000000000030 ---[ end trace 0000000000000000 ]--- RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Signed-off-by: Leesoo Ahn <[email protected]> Signed-off-by: John Johansen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 3dd384108d53834002be5630132ad5c3f32166ad ] profile->parent->dents[AAFS_PROF_DIR] could be NULL only if its parent is made from __create_missing_ancestors(..) and 'ent->old' is NULL in aa_replace_profiles(..). In that case, it must return an error code and the code, -ENOENT represents its state that the path of its parent is not existed yet. BUG: kernel NULL pointer dereference, address: 0000000000000030 PGD 0 P4D 0 PREEMPT SMP PTI CPU: 4 PID: 3362 Comm: apparmor_parser Not tainted 6.8.0-24-generic #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Call Trace: <TASK> ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? kernelmode_fixup_or_oops+0xb2/0x140 ? __bad_area_nosemaphore+0x1a5/0x2c0 ? find_vma+0x34/0x60 ? bad_area_nosemaphore+0x16/0x30 ? do_user_addr_fault+0x2a2/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? aafs_create.constprop.0+0x7f/0x130 ? aafs_create.constprop.0+0x51/0x130 __aafs_profile_mkdir+0x3d6/0x480 aa_replace_profiles+0x83f/0x1270 policy_update+0xe3/0x180 profile_load+0xbc/0x150 ? rw_verify_area+0x47/0x140 vfs_write+0x100/0x480 ? __x64_sys_openat+0x55/0xa0 ? syscall_exit_to_user_mode+0x86/0x260 ksys_write+0x73/0x100 __x64_sys_write+0x19/0x30 x64_sys_call+0x7e/0x25c0 do_syscall_64+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7be9f211c574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007ffd26f2b8c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00005d504415e200 RCX: 00007be9f211c574 RDX: 0000000000001fc1 RSI: 00005d504418bc80 RDI: 0000000000000004 RBP: 0000000000001fc1 R08: 0000000000001fc1 R09: 0000000080000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00005d504418bc80 R13: 0000000000000004 R14: 00007ffd26f2b9b0 R15: 00007ffd26f2ba30 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer qrtr snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device i2c_i801 snd_timer i2c_smbus qxl snd soundcore drm_ttm_helper lpc_ich ttm joydev input_leds serio_raw mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs qemu_fw_cfg ip_tables x_tables autofs4 hid_generic usbhid hid ahci libahci psmouse virtio_rng xhci_pci xhci_pci_renesas CR2: 0000000000000030 ---[ end trace 0000000000000000 ]--- RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Signed-off-by: Leesoo Ahn <[email protected]> Signed-off-by: John Johansen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 4a058b34b52ed3feb1f3ff6fd26aefeeeed20cba upstream. KASAN reported a null-ptr-deref issue when executing the following command: # echo ts2020 0x20 > /sys/bus/i2c/devices/i2c-0/new_device KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 53 UID: 0 PID: 970 Comm: systemd-udevd Not tainted 6.12.0-rc2+ #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) RIP: 0010:ts2020_probe+0xad/0xe10 [ts2020] RSP: 0018:ffffc9000abbf598 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffffc0714809 RDX: 0000000000000002 RSI: ffff88811550be00 RDI: 0000000000000010 RBP: ffff888109868800 R08: 0000000000000001 R09: fffff52001577eb6 R10: 0000000000000000 R11: ffffc9000abbff50 R12: ffffffffc0714790 R13: 1ffff92001577eb8 R14: ffffffffc07190d0 R15: 0000000000000001 FS: 00007f95f13b98c0(0000) GS:ffff888149280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555d2634b000 CR3: 0000000152236000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ts2020_probe+0xad/0xe10 [ts2020] i2c_device_probe+0x421/0xb40 really_probe+0x266/0x850 ... The cause of the problem is that when using sysfs to dynamically register an i2c device, there is no platform data, but the probe process of ts2020 needs to use platform data, resulting in a null pointer being accessed. Solve this problem by adding checks to platform data. Fixes: dc245a5 ("[media] ts2020: implement I2C client bindings") Cc: <[email protected]> Signed-off-by: Li Zetao <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit bbb36173fe51836ef6464d6afee16da290f97978)

commit 4a058b34b52ed3feb1f3ff6fd26aefeeeed20cba upstream. KASAN reported a null-ptr-deref issue when executing the following command: # echo ts2020 0x20 > /sys/bus/i2c/devices/i2c-0/new_device KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 53 UID: 0 PID: 970 Comm: systemd-udevd Not tainted 6.12.0-rc2+ #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) RIP: 0010:ts2020_probe+0xad/0xe10 [ts2020] RSP: 0018:ffffc9000abbf598 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffffc0714809 RDX: 0000000000000002 RSI: ffff88811550be00 RDI: 0000000000000010 RBP: ffff888109868800 R08: 0000000000000001 R09: fffff52001577eb6 R10: 0000000000000000 R11: ffffc9000abbff50 R12: ffffffffc0714790 R13: 1ffff92001577eb8 R14: ffffffffc07190d0 R15: 0000000000000001 FS: 00007f95f13b98c0(0000) GS:ffff888149280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555d2634b000 CR3: 0000000152236000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ts2020_probe+0xad/0xe10 [ts2020] i2c_device_probe+0x421/0xb40 really_probe+0x266/0x850 ... The cause of the problem is that when using sysfs to dynamically register an i2c device, there is no platform data, but the probe process of ts2020 needs to use platform data, resulting in a null pointer being accessed. Solve this problem by adding checks to platform data. Fixes: dc245a5 ("[media] ts2020: implement I2C client bindings") Cc: <[email protected]> Signed-off-by: Li Zetao <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit a2ed3b780f34e4a6403064208bc2c99d1ed85026)

@strlen

[ Upstream commit 146b6f1112eb30a19776d6c323c994e9d67790db ] Under certain kernel configurations when building with Clang/LLVM, the compiler does not generate a return or jump as the terminator instruction for ip_vs_protocol_init(), triggering the following objtool warning during build time: vmlinux.o: warning: objtool: ip_vs_protocol_init() falls through to next function __initstub__kmod_ip_vs_rr__935_123_ip_vs_rr_init6() At runtime, this either causes an oops when trying to load the ipvs module or a boot-time panic if ipvs is built-in. This same issue has been reported by the Intel kernel test robot previously. Digging deeper into both LLVM and the kernel code reveals this to be a undefined behavior problem. ip_vs_protocol_init() uses a on-stack buffer of 64 chars to store the registered protocol names and leaves it uninitialized after definition. The function calls strnlen() when concatenating protocol names into the buffer. With CONFIG_FORTIFY_SOURCE strnlen() performs an extra step to check whether the last byte of the input char buffer is a null character (commit 3009f89 ("fortify: Allow strlen() and strnlen() to pass compile-time known lengths")). This, together with possibly other configurations, cause the following IR to be generated: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr deepin-community#5 section ".init.text" align 16 !kcfi_type !29 { %1 = alloca [64 x i8], align 16 ... 14: ; preds = %11 %15 = getelementptr inbounds i8, ptr %1, i64 63 %16 = load i8, ptr %15, align 1 %17 = tail call i1 @llvm.is.constant.i8(i8 %16) %18 = icmp eq i8 %16, 0 %19 = select i1 %17, i1 %18, i1 false br i1 %19, label %20, label %23 20: ; preds = %14 %21 = call i64 @strlen(ptr noundef nonnull dereferenceable(1) %1) deepin-community#23 ... 23: ; preds = %14, %11, %20 %24 = call i64 @strnlen(ptr noundef nonnull dereferenceable(1) %1, i64 noundef 64) deepin-community#24 ... } The above code calculates the address of the last char in the buffer (value %15) and then loads from it (value %16). Because the buffer is never initialized, the LLVM GVN pass marks value %16 as undefined: %13 = getelementptr inbounds i8, ptr %1, i64 63 br i1 undef, label %14, label %17 This gives later passes (SCCP, in particular) more DCE opportunities by propagating the undef value further, and eventually removes everything after the load on the uninitialized stack location: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #0 section ".init.text" align 16 !kcfi_type !11 { %1 = alloca [64 x i8], align 16 ... 12: ; preds = %11 %13 = getelementptr inbounds i8, ptr %1, i64 63 unreachable } In this way, the generated native code will just fall through to the next function, as LLVM does not generate any code for the unreachable IR instruction and leaves the function without a terminator. Zero the on-stack buffer to avoid this possible UB. Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Co-developed-by: Ruowen Qin <[email protected]> Signed-off-by: Ruowen Qin <[email protected]> Signed-off-by: Jinghao Jia <[email protected]> Acked-by: Julian Anastasov <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

@strlen

[ Upstream commit 146b6f1112eb30a19776d6c323c994e9d67790db ] Under certain kernel configurations when building with Clang/LLVM, the compiler does not generate a return or jump as the terminator instruction for ip_vs_protocol_init(), triggering the following objtool warning during build time: vmlinux.o: warning: objtool: ip_vs_protocol_init() falls through to next function __initstub__kmod_ip_vs_rr__935_123_ip_vs_rr_init6() At runtime, this either causes an oops when trying to load the ipvs module or a boot-time panic if ipvs is built-in. This same issue has been reported by the Intel kernel test robot previously. Digging deeper into both LLVM and the kernel code reveals this to be a undefined behavior problem. ip_vs_protocol_init() uses a on-stack buffer of 64 chars to store the registered protocol names and leaves it uninitialized after definition. The function calls strnlen() when concatenating protocol names into the buffer. With CONFIG_FORTIFY_SOURCE strnlen() performs an extra step to check whether the last byte of the input char buffer is a null character (commit 3009f89 ("fortify: Allow strlen() and strnlen() to pass compile-time known lengths")). This, together with possibly other configurations, cause the following IR to be generated: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #5 section ".init.text" align 16 !kcfi_type !29 { %1 = alloca [64 x i8], align 16 ... 14: ; preds = %11 %15 = getelementptr inbounds i8, ptr %1, i64 63 %16 = load i8, ptr %15, align 1 %17 = tail call i1 @llvm.is.constant.i8(i8 %16) %18 = icmp eq i8 %16, 0 %19 = select i1 %17, i1 %18, i1 false br i1 %19, label %20, label %23 20: ; preds = %14 %21 = call i64 @strlen(ptr noundef nonnull dereferenceable(1) %1) #23 ... 23: ; preds = %14, %11, %20 %24 = call i64 @strnlen(ptr noundef nonnull dereferenceable(1) %1, i64 noundef 64) #24 ... } The above code calculates the address of the last char in the buffer (value %15) and then loads from it (value %16). Because the buffer is never initialized, the LLVM GVN pass marks value %16 as undefined: %13 = getelementptr inbounds i8, ptr %1, i64 63 br i1 undef, label %14, label %17 This gives later passes (SCCP, in particular) more DCE opportunities by propagating the undef value further, and eventually removes everything after the load on the uninitialized stack location: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #0 section ".init.text" align 16 !kcfi_type !11 { %1 = alloca [64 x i8], align 16 ... 12: ; preds = %11 %13 = getelementptr inbounds i8, ptr %1, i64 63 unreachable } In this way, the generated native code will just fall through to the next function, as LLVM does not generate any code for the unreachable IR instruction and leaves the function without a terminator. Zero the on-stack buffer to avoid this possible UB. Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Co-developed-by: Ruowen Qin <[email protected]> Signed-off-by: Ruowen Qin <[email protected]> Signed-off-by: Jinghao Jia <[email protected]> Acked-by: Julian Anastasov <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…-wake [ Upstream commit f31f33dbb3bab572bad9fe7b849ab0dcbe6fd279 ] Some laptops have pins which are a wake source for S0i3/S3 but which aren't a wake source for S4/S5 and which cause issues when left unmasked during hibernation (S4). For example HP EliteBook 855 G7 has pin deepin-community#24 that causes instant wakeup (hibernation failure) if left unmasked (it is a wake source only for S0i3/S3). GPIO pin deepin-community#24 on this platform is likely dedicated to WWAN XMM7360 modem since this pin triggers wake notify to WWAN modem's parent PCIe port. Fix this by considering a pin a wake source only if it is marked as one for the current suspend type (S0i3/S3 vs S4/S5). Since Z-wake pins only make sense at runtime these were excluded from both of suspend categories, so pins with only the Z-wake flag set are effectively treated as non-wake pins. Fixes: 2fff0b5 ("pinctrl: amd: Mask non-wake source pins with interrupt enabled at suspend") Signed-off-by: Maciej S. Szmigiero <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/d4b2d076366fdd08a0c1cd9b7ecd91dc95e07269.1736184752.git.mail@maciej.szmigiero.name Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 4fb27c7ceac0b722e936529c5e4383059180475d)

…-wake [ Upstream commit f31f33dbb3bab572bad9fe7b849ab0dcbe6fd279 ] Some laptops have pins which are a wake source for S0i3/S3 but which aren't a wake source for S4/S5 and which cause issues when left unmasked during hibernation (S4). For example HP EliteBook 855 G7 has pin deepin-community#24 that causes instant wakeup (hibernation failure) if left unmasked (it is a wake source only for S0i3/S3). GPIO pin deepin-community#24 on this platform is likely dedicated to WWAN XMM7360 modem since this pin triggers wake notify to WWAN modem's parent PCIe port. Fix this by considering a pin a wake source only if it is marked as one for the current suspend type (S0i3/S3 vs S4/S5). Since Z-wake pins only make sense at runtime these were excluded from both of suspend categories, so pins with only the Z-wake flag set are effectively treated as non-wake pins. Fixes: 2fff0b5 ("pinctrl: amd: Mask non-wake source pins with interrupt enabled at suspend") Signed-off-by: Maciej S. Szmigiero <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/d4b2d076366fdd08a0c1cd9b7ecd91dc95e07269.1736184752.git.mail@maciej.szmigiero.name Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…-wake [ Upstream commit f31f33dbb3bab572bad9fe7b849ab0dcbe6fd279 ] Some laptops have pins which are a wake source for S0i3/S3 but which aren't a wake source for S4/S5 and which cause issues when left unmasked during hibernation (S4). For example HP EliteBook 855 G7 has pin #24 that causes instant wakeup (hibernation failure) if left unmasked (it is a wake source only for S0i3/S3). GPIO pin #24 on this platform is likely dedicated to WWAN XMM7360 modem since this pin triggers wake notify to WWAN modem's parent PCIe port. Fix this by considering a pin a wake source only if it is marked as one for the current suspend type (S0i3/S3 vs S4/S5). Since Z-wake pins only make sense at runtime these were excluded from both of suspend categories, so pins with only the Z-wake flag set are effectively treated as non-wake pins. Fixes: 2fff0b5 ("pinctrl: amd: Mask non-wake source pins with interrupt enabled at suspend") Signed-off-by: Maciej S. Szmigiero <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/d4b2d076366fdd08a0c1cd9b7ecd91dc95e07269.1736184752.git.mail@maciej.szmigiero.name Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 9593172d93b9f91c362baec4643003dc29802929 ] syzkaller reported a use-after-free in geneve_find_dev() [0] without repro. geneve_configure() links struct geneve_dev.next to net_generic(net, geneve_net_id)->geneve_list. The net here could differ from dev_net(dev) if IFLA_NET_NS_PID, IFLA_NET_NS_FD, or IFLA_TARGET_NETNSID is set. When dev_net(dev) is dismantled, geneve_exit_batch_rtnl() finally calls unregister_netdevice_queue() for each dev in the netns, and later the dev is freed. However, its geneve_dev.next is still linked to the backend UDP socket netns. Then, use-after-free will occur when another geneve dev is created in the netns. Let's call geneve_dellink() instead in geneve_destroy_tunnels(). [0]: BUG: KASAN: slab-use-after-free in geneve_find_dev drivers/net/geneve.c:1295 [inline] BUG: KASAN: slab-use-after-free in geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 Read of size 2 at addr ffff000054d6ee24 by task syz.1.4029/13441 CPU: 1 UID: 0 PID: 13441 Comm: syz.1.4029 Not tainted 6.13.0-g0ad9617c78ac deepin-community#24 dc35ca22c79fb82e8e7bc5c9c9adafea898b1e3d Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load2_noabort+0x20/0x30 mm/kasan/report_generic.c:379 geneve_find_dev drivers/net/geneve.c:1295 [inline] geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 geneve_newlink+0xb8/0x128 drivers/net/geneve.c:1634 rtnl_newlink_create+0x23c/0x868 net/core/rtnetlink.c:3795 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Allocated by task 13247: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4298 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4304 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:645 alloc_netdev_mqs+0xb8/0x11a0 net/core/dev.c:11470 rtnl_create_link+0x2b8/0xb50 net/core/rtnetlink.c:3604 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3780 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x48/0x68 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x140/0x420 mm/slub.c:4761 kvfree+0x4c/0x68 mm/util.c:688 netdev_release+0x94/0xc8 net/core/net-sysfs.c:2065 device_release+0x98/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x2b0/0x438 lib/kobject.c:737 netdev_run_todo+0xe5c/0xfc8 net/core/dev.c:11185 rtnl_unlock+0x20/0x38 net/core/rtnetlink.c:151 cleanup_net+0x4fc/0x8c0 net/core/net_namespace.c:648 process_one_work+0x700/0x1398 kernel/workqueue.c:3236 process_scheduled_works kernel/workqueue.c:3317 [inline] worker_thread+0x8c4/0xe10 kernel/workqueue.c:3398 kthread+0x4bc/0x608 kernel/kthread.c:464 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:862 The buggy address belongs to the object at ffff000054d6e000 which belongs to the cache kmalloc-cg-4k of size 4096 The buggy address is located 3620 bytes inside of freed 4096-byte region [ffff000054d6e000, ffff000054d6f000) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x94d68 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:ffff000016276181 flags: 0x3fffe0000000040(head|node=0|zone=0|lastcpupid=0x1ffff) page_type: f5(slab) raw: 03fffe0000000040 ffff0000c000f500 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000040004 00000001f5000000 ffff000016276181 head: 03fffe0000000040 ffff0000c000f500 dead000000000122 0000000000000000 head: 0000000000000000 0000000000040004 00000001f5000000 ffff000016276181 head: 03fffe0000000003 fffffdffc1535a01 ffffffffffffffff 0000000000000000 head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff000054d6ed00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff000054d6ed80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff000054d6ee00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff000054d6ee80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff000054d6ef00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 2d07dc7 ("geneve: add initial netdev driver for GENEVE tunnels") Reported-by: syzkaller <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 9593172d93b9f91c362baec4643003dc29802929 ] syzkaller reported a use-after-free in geneve_find_dev() [0] without repro. geneve_configure() links struct geneve_dev.next to net_generic(net, geneve_net_id)->geneve_list. The net here could differ from dev_net(dev) if IFLA_NET_NS_PID, IFLA_NET_NS_FD, or IFLA_TARGET_NETNSID is set. When dev_net(dev) is dismantled, geneve_exit_batch_rtnl() finally calls unregister_netdevice_queue() for each dev in the netns, and later the dev is freed. However, its geneve_dev.next is still linked to the backend UDP socket netns. Then, use-after-free will occur when another geneve dev is created in the netns. Let's call geneve_dellink() instead in geneve_destroy_tunnels(). [0]: BUG: KASAN: slab-use-after-free in geneve_find_dev drivers/net/geneve.c:1295 [inline] BUG: KASAN: slab-use-after-free in geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 Read of size 2 at addr ffff000054d6ee24 by task syz.1.4029/13441 CPU: 1 UID: 0 PID: 13441 Comm: syz.1.4029 Not tainted 6.13.0-g0ad9617c78ac deepin-community#24 dc35ca22c79fb82e8e7bc5c9c9adafea898b1e3d Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load2_noabort+0x20/0x30 mm/kasan/report_generic.c:379 geneve_find_dev drivers/net/geneve.c:1295 [inline] geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 geneve_newlink+0xb8/0x128 drivers/net/geneve.c:1634 rtnl_newlink_create+0x23c/0x868 net/core/rtnetlink.c:3795 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Allocated by task 13247: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4298 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4304 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:645 alloc_netdev_mqs+0xb8/0x11a0 net/core/dev.c:11470 rtnl_create_link+0x2b8/0xb50 net/core/rtnetlink.c:3604 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3780 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x48/0x68 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x140/0x420 mm/slub.c:4761 kvfree+0x4c/0x68 mm/util.c:688 netdev_release+0x94/0xc8 net/core/net-sysfs.c:2065 device_release+0x98/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x2b0/0x438 lib/kobject.c:737 netdev_run_todo+0xe5c/0xfc8 net/core/dev.c:11185 rtnl_unlock+0x20/0x38 net/core/rtnetlink.c:151 cleanup_net+0x4fc/0x8c0 net/core/net_namespace.c:648 process_one_work+0x700/0x1398 kernel/workqueue.c:3236 process_scheduled_works kernel/workqueue.c:3317 [inline] worker_thread+0x8c4/0xe10 kernel/workqueue.c:3398 kthread+0x4bc/0x608 kernel/kthread.c:464 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:862 The buggy address belongs to the object at ffff000054d6e000 which belongs to the cache kmalloc-cg-4k of size 4096 The buggy address is located 3620 bytes inside of freed 4096-byte region [ffff000054d6e000, ffff000054d6f000) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x94d68 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:ffff000016276181 flags: 0x3fffe0000000040(head|node=0|zone=0|lastcpupid=0x1ffff) page_type: f5(slab) raw: 03fffe0000000040 ffff0000c000f500 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000040004 00000001f5000000 ffff000016276181 head: 03fffe0000000040 ffff0000c000f500 dead000000000122 0000000000000000 head: 0000000000000000 0000000000040004 00000001f5000000 ffff000016276181 head: 03fffe0000000003 fffffdffc1535a01 ffffffffffffffff 0000000000000000 head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff000054d6ed00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff000054d6ed80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff000054d6ee00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff000054d6ee80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff000054d6ef00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 2d07dc7 ("geneve: add initial netdev driver for GENEVE tunnels") Reported-by: syzkaller <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 3ce92ca990cfac88a87c61df3cc0b5880e688ecf)

opsiff added 3 commits September 19, 2023 10:02

feat: Enable 8822{BU,CU},8723DU,8821CU,8851BE on x86 desktop

84c13c0

After Linux 6.2 release,8822{bu,cu},8723du,8821cu add to upstream driver After Linux 6.5 release,8851be add to upstream driver Default enable them for users.

feat: Enable 8822{BU,CU},8723DU,8821CU,8851BE on x86 laptop

a00ba45

feat: Enable 8822{BU,CU},8723DU,8821CU,8851BE on x86 desktop After Linux 6.2 release,8822{bu,cu},8723du,8821cu add to upstream driver After Linux 6.5 release,8851be add to upstream driver Default enable them for users.

matrix-wsk merged commit 602efff into deepin-community:kernel-mainline Sep 19, 2023

opsiff deleted the patch-1 branch September 21, 2023 06:14

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

feat: Enable Realtek 8822{BU,CU},8723DU,8821CU,8851BE,8852{BE,CE} #24

feat: Enable Realtek 8822{BU,CU},8723DU,8821CU,8851BE,8852{BE,CE} #24

opsiff commented Sep 19, 2023

deepin-ci-robot commented Sep 19, 2023

feat: Enable Realtek 8822{BU,CU},8723DU,8821CU,8851BE,8852{BE,CE} #24

feat: Enable Realtek 8822{BU,CU},8723DU,8821CU,8851BE,8852{BE,CE} #24

Conversation

opsiff commented Sep 19, 2023

deepin-ci-robot commented Sep 19, 2023