TEST for CI #1

dbaluta · 2019-11-15T12:04:04Z

Signed-off-by: Daniel Baluta [email protected]

Signed-off-by: Daniel Baluta <[email protected]>

When lockdep is enabled, plugging Thunderbolt dock on Dominik's laptop triggers following splat: ====================================================== WARNING: possible circular locking dependency detected 5.3.0-rc6+ #1 Tainted: G T ------------------------------------------------------ pool-/usr/lib/b/1258 is trying to acquire lock: 000000005ab0ad43 (pci_rescan_remove_lock){+.+.}, at: authorized_store+0xe8/0x210 but task is already holding lock: 00000000bfb796b5 (&tb->lock){+.+.}, at: authorized_store+0x7c/0x210 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&tb->lock){+.+.}: __mutex_lock+0xac/0x9a0 tb_domain_add+0x2d/0x130 nhi_probe+0x1dd/0x330 pci_device_probe+0xd2/0x150 really_probe+0xee/0x280 driver_probe_device+0x50/0xc0 bus_for_each_drv+0x84/0xd0 __device_attach+0xe4/0x150 pci_bus_add_device+0x4e/0x70 pci_bus_add_devices+0x2e/0x66 pci_bus_add_devices+0x59/0x66 pci_bus_add_devices+0x59/0x66 enable_slot+0x344/0x450 acpiphp_check_bridge.part.0+0x119/0x150 acpiphp_hotplug_notify+0xaa/0x140 acpi_device_hotplug+0xa2/0x3f0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x234/0x580 worker_thread+0x50/0x3b0 kthread+0x10a/0x140 ret_from_fork+0x3a/0x50 -> #0 (pci_rescan_remove_lock){+.+.}: __lock_acquire+0xe54/0x1ac0 lock_acquire+0xb8/0x1b0 __mutex_lock+0xac/0x9a0 authorized_store+0xe8/0x210 kernfs_fop_write+0x125/0x1b0 vfs_write+0xc2/0x1d0 ksys_write+0x6c/0xf0 do_syscall_64+0x50/0x180 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&tb->lock); lock(pci_rescan_remove_lock); lock(&tb->lock); lock(pci_rescan_remove_lock); *** DEADLOCK *** 5 locks held by pool-/usr/lib/b/1258: #0: 000000003df1a1ad (&f->f_pos_lock){+.+.}, at: __fdget_pos+0x4d/0x60 #1: 0000000095a40b02 (sb_writers#6){.+.+}, at: vfs_write+0x185/0x1d0 #2: 0000000017a7d714 (&of->mutex){+.+.}, at: kernfs_fop_write+0xf2/0x1b0 #3: 000000004f262981 (kn->count#208){.+.+}, at: kernfs_fop_write+0xfa/0x1b0 #4: 00000000bfb796b5 (&tb->lock){+.+.}, at: authorized_store+0x7c/0x210 stack backtrace: CPU: 0 PID: 1258 Comm: pool-/usr/lib/b Tainted: G T 5.3.0-rc6+ #1 On an system using ACPI hotplug the host router gets hotplugged first and then the firmware starts sending notifications about connected devices so the above scenario should not happen in reality. However, after taking a second look at commit a03e828 ("thunderbolt: Serialize PCIe tunnel creation with PCI rescan") that introduced the locking, I don't think it is actually correct. It may have cured the symptom but probably the real root cause was somewhere closer to PCI stack and possibly is already fixed with recent kernels. I also tried to reproduce the original issue with the commit reverted but could not. So to keep lockdep happy and the code bit less complex drop calls to pci_lock_rescan_remove()/pci_unlock_rescan_remove() in tb_switch_set_authorized() effectively reverting a03e828. Link: https://lkml.org/lkml/2019/8/30/513 Fixes: a03e828 ("thunderbolt: Serialize PCIe tunnel creation with PCI rescan") Reported-by: Dominik Brodowski <[email protected]> Signed-off-by: Mika Westerberg <[email protected]>

We have been calling it virtio_fs and even file name is virtio_fs.c. Module name is virtio_fs.ko but when registering file system user is supposed to specify filesystem type as "virtiofs". Masayoshi Mizuma reported that he specified filesytem type as "virtio_fs" and got this warning on console. ------------[ cut here ]------------ request_module fs-virtio_fs succeeded, but still no fs? WARNING: CPU: 1 PID: 1234 at fs/filesystems.c:274 get_fs_type+0x12c/0x138 Modules linked in: ... virtio_fs fuse virtio_net net_failover ... CPU: 1 PID: 1234 Comm: mount Not tainted 5.4.0-rc1 #1 So looks like kernel could find the module virtio_fs.ko but could not find filesystem type after that. It probably is better to rename module name to virtiofs.ko so that above warning goes away in case user ends up specifying wrong fs name. Reported-by: Masayoshi Mizuma <[email protected]> Suggested-by: Stefan Hajnoczi <[email protected]> Signed-off-by: Vivek Goyal <[email protected]> Tested-by: Masayoshi Mizuma <[email protected]> Reviewed-by: Stefan Hajnoczi <[email protected]> Signed-off-by: Miklos Szeredi <[email protected]>

When timer_of_init fails, it cleans up after itself by undoing everything it did during the initialization function. mtk_syst_init and mtk_gpt_init both call timer_of_cleanup if timer_of_init fails. timer_of_cleanup try to release the resource taken. Since these resources have already been cleaned up by timer_of_init, we end up getting a few warnings printed: [ 0.001935] WARNING: CPU: 0 PID: 0 at __clk_put+0xe8/0x128 [ 0.002650] Modules linked in: [ 0.003058] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.67+ #1 [ 0.003852] Hardware name: MediaTek MT8183 (DT) [ 0.004446] pstate: 20400085 (nzCv daIf +PAN -UAO) [ 0.005073] pc : __clk_put+0xe8/0x128 [ 0.005555] lr : clk_put+0xc/0x14 [ 0.005988] sp : ffffff80090b3ea0 [ 0.006422] x29: ffffff80090b3ea0 x28: 0000000040e20018 [ 0.007121] x27: ffffffc07bfff780 x26: 0000000000000001 [ 0.007819] x25: ffffff80090bda80 x24: ffffff8008ec5828 [ 0.008517] x23: ffffff80090bd000 x22: ffffff8008d8b2e8 [ 0.009216] x21: 0000000000000001 x20: fffffffffffffdfb [ 0.009914] x19: ffffff8009166180 x18: 00000000002bffa8 [ 0.010612] x17: ffffffc012996980 x16: 0000000000000000 [ 0.011311] x15: ffffffbf004a6800 x14: 3536343038393334 [ 0.012009] x13: 2079726576652073 x12: 7eb9c62c5c38f100 [ 0.012707] x11: ffffff80090b3ba0 x10: ffffff80090b3ba0 [ 0.013405] x9 : 0000000000000004 x8 : 0000000000000040 [ 0.014103] x7 : ffffffc079400270 x6 : 0000000000000000 [ 0.014801] x5 : ffffffc079400248 x4 : 0000000000000000 [ 0.015499] x3 : 0000000000000000 x2 : 0000000000000000 [ 0.016197] x1 : ffffff80091661c0 x0 : fffffffffffffdfb [ 0.016896] Call trace: [ 0.017218] __clk_put+0xe8/0x128 [ 0.017654] clk_put+0xc/0x14 [ 0.018048] timer_of_cleanup+0x60/0x7c [ 0.018551] mtk_syst_init+0x8c/0x9c [ 0.019020] timer_probe+0x6c/0xe0 [ 0.019469] time_init+0x14/0x44 [ 0.019893] start_kernel+0x2d0/0x46c [ 0.020378] ---[ end trace 8c1efabea1267649 ]--- [ 0.020982] ------------[ cut here ]------------ [ 0.021586] Trying to vfree() nonexistent vm area ((____ptrval____)) [ 0.022427] WARNING: CPU: 0 PID: 0 at __vunmap+0xd0/0xd8 [ 0.023119] Modules linked in: [ 0.023524] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.19.67+ #1 [ 0.024498] Hardware name: MediaTek MT8183 (DT) [ 0.025091] pstate: 60400085 (nZCv daIf +PAN -UAO) [ 0.025718] pc : __vunmap+0xd0/0xd8 [ 0.026176] lr : __vunmap+0xd0/0xd8 [ 0.026632] sp : ffffff80090b3e90 [ 0.027066] x29: ffffff80090b3e90 x28: 0000000040e20018 [ 0.027764] x27: ffffffc07bfff780 x26: 0000000000000001 [ 0.028462] x25: ffffff80090bda80 x24: ffffff8008ec5828 [ 0.029160] x23: ffffff80090bd000 x22: ffffff8008d8b2e8 [ 0.029858] x21: 0000000000000000 x20: 0000000000000000 [ 0.030556] x19: ffffff800800d000 x18: 00000000002bffa8 [ 0.031254] x17: 0000000000000000 x16: 0000000000000000 [ 0.031952] x15: ffffffbf004a6800 x14: 3536343038393334 [ 0.032651] x13: 2079726576652073 x12: 7eb9c62c5c38f100 [ 0.033349] x11: ffffff80090b3b40 x10: ffffff80090b3b40 [ 0.034047] x9 : 0000000000000005 x8 : 5f5f6c6176727470 [ 0.034745] x7 : 5f5f5f5f28282061 x6 : ffffff80091c86ef [ 0.035443] x5 : ffffff800852b690 x4 : 0000000000000000 [ 0.036141] x3 : 0000000000000002 x2 : 0000000000000002 [ 0.036839] x1 : 7eb9c62c5c38f100 x0 : 7eb9c62c5c38f100 [ 0.037536] Call trace: [ 0.037859] __vunmap+0xd0/0xd8 [ 0.038271] vunmap+0x24/0x30 [ 0.038664] __iounmap+0x2c/0x34 [ 0.039088] timer_of_cleanup+0x70/0x7c [ 0.039591] mtk_syst_init+0x8c/0x9c [ 0.040060] timer_probe+0x6c/0xe0 [ 0.040507] time_init+0x14/0x44 [ 0.040932] start_kernel+0x2d0/0x46c This commit remove the calls to timer_of_cleanup when timer_of_init fails since it is unnecessary and actually cause warnings to be printed. Fixes: a0858f9 ("mediatek: Convert the driver to timer-of") Signed-off-by: Fabien Parent <[email protected]> Signed-off-by: Daniel Lezcano <[email protected]> Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/

Original version of g920_get_config() contained two kind of actions: 1. Device specific communication to query/set some parameters which requires active communication channel with the device, or, put in other way, for the call to be sandwiched between hid_device_io_start() and hid_device_io_stop(). 2. Input subsystem specific FF controller initialization which, in order to access a valid 'struct hid_input' via 'hid->inputs.next', requires claimed hidinput which means be executed after the call to hid_hw_start() with connect_mask containing HID_CONNECT_HIDINPUT. Location of g920_get_config() can only fulfill requirements for #1 and not #2, which might result in following backtrace: [ 88.312258] logitech-hidpp-device 0003:046D:C262.0005: HID++ 4.2 device connected. [ 88.320298] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 88.320304] #PF: supervisor read access in kernel mode [ 88.320307] #PF: error_code(0x0000) - not-present page [ 88.320309] PGD 0 P4D 0 [ 88.320315] Oops: 0000 [#1] SMP PTI [ 88.320320] CPU: 1 PID: 3080 Comm: systemd-udevd Not tainted 5.4.0-rc1+ linux-kernel-labs#31 [ 88.320322] Hardware name: Apple Inc. MacBookPro11,1/Mac-189A3D4F975D5FFC, BIOS 149.0.0.0.0 09/17/2018 [ 88.320334] RIP: 0010:hidpp_probe+0x61f/0x948 [hid_logitech_hidpp] [ 88.320338] Code: 81 00 00 48 89 ef e8 f0 d6 ff ff 41 89 c6 85 c0 75 b5 0f b6 44 24 28 48 8b 5d 00 88 44 24 1e 89 44 24 0c 48 8b 83 18 1c 00 00 <48> 8b 48 18 48 8b 83 10 19 00 00 48 8b 40 40 48 89 0c 24 0f b7 80 [ 88.320341] RSP: 0018:ffffb0a6824aba68 EFLAGS: 00010246 [ 88.320345] RAX: 0000000000000000 RBX: ffff93a50756e000 RCX: 0000000000010408 [ 88.320347] RDX: 0000000000000000 RSI: ffff93a51f0ad0a0 RDI: 000000000002d0a0 [ 88.320350] RBP: ffff93a50416da28 R08: ffff93a50416da70 R09: ffff93a50416da70 [ 88.320352] R10: 000000148ae9e60c R11: 00000000000f1525 R12: ffff93a50756e000 [ 88.320354] R13: ffff93a50756f8d0 R14: 0000000000000000 R15: ffff93a50756fc38 [ 88.320358] FS: 00007f8d8c1e0940(0000) GS:ffff93a51f080000(0000) knlGS:0000000000000000 [ 88.320361] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.320363] CR2: 0000000000000018 CR3: 00000003996d8003 CR4: 00000000001606e0 [ 88.320366] Call Trace: [ 88.320377] ? _cond_resched+0x15/0x30 [ 88.320387] ? create_pinctrl+0x2f/0x3c0 [ 88.320393] ? kernfs_link_sibling+0x94/0xe0 [ 88.320398] ? _cond_resched+0x15/0x30 [ 88.320402] ? kernfs_activate+0x5f/0x80 [ 88.320406] ? kernfs_add_one+0xe2/0x130 [ 88.320411] hid_device_probe+0x106/0x170 [ 88.320419] really_probe+0x147/0x3c0 [ 88.320424] driver_probe_device+0xb6/0x100 [ 88.320428] device_driver_attach+0x53/0x60 [ 88.320433] __driver_attach+0x8a/0x150 [ 88.320437] ? device_driver_attach+0x60/0x60 [ 88.320440] bus_for_each_dev+0x78/0xc0 [ 88.320445] bus_add_driver+0x14d/0x1f0 [ 88.320450] driver_register+0x6c/0xc0 [ 88.320453] ? 0xffffffffc0d67000 [ 88.320457] __hid_register_driver+0x4c/0x80 [ 88.320464] do_one_initcall+0x46/0x1f4 [ 88.320469] ? _cond_resched+0x15/0x30 [ 88.320474] ? kmem_cache_alloc_trace+0x162/0x220 [ 88.320481] ? do_init_module+0x23/0x230 [ 88.320486] do_init_module+0x5c/0x230 [ 88.320491] load_module+0x26e1/0x2990 [ 88.320502] ? ima_post_read_file+0xf0/0x100 [ 88.320508] ? __do_sys_finit_module+0xaa/0x110 [ 88.320512] __do_sys_finit_module+0xaa/0x110 [ 88.320520] do_syscall_64+0x5b/0x180 [ 88.320525] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 88.320528] RIP: 0033:0x7f8d8d1f01fd [ 88.320532] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 5b 8c 0c 00 f7 d8 64 89 01 48 [ 88.320535] RSP: 002b:00007ffefa3bb068 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 88.320539] RAX: ffffffffffffffda RBX: 000055922040cb40 RCX: 00007f8d8d1f01fd [ 88.320541] RDX: 0000000000000000 RSI: 00007f8d8ce4984d RDI: 0000000000000006 [ 88.320543] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000007 [ 88.320545] R10: 0000000000000006 R11: 0000000000000246 R12: 00007f8d8ce4984d [ 88.320547] R13: 0000000000000000 R14: 000055922040efc0 R15: 000055922040cb40 [ 88.320551] Modules linked in: hid_logitech_hidpp(+) fuse rfcomm ccm xt_CHECKSUM xt_MASQUERADE bridge stp llc nf_nat_tftp nf_conntrack_tftp nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat tun iptable_mangle iptable_raw iptable_security nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c ip_set nfnetlink ebtable_filter ebtables ip6table_filter ip6_tables cmac bnep sunrpc dm_crypt nls_utf8 hfsplus intel_rapl_msr intel_rapl_common ath9k_htc ath9k_common x86_pkg_temp_thermal intel_powerclamp b43 ath9k_hw coretemp snd_hda_codec_hdmi cordic kvm_intel snd_hda_codec_cirrus mac80211 snd_hda_codec_generic ledtrig_audio kvm snd_hda_intel snd_intel_nhlt irqbypass snd_hda_codec btusb btrtl snd_hda_core ath btbcm ssb snd_hwdep btintel snd_seq crct10dif_pclmul iTCO_wdt snd_seq_device crc32_pclmul bluetooth mmc_core iTCO_vendor_support joydev cfg80211 [ 88.320602] applesmc ghash_clmulni_intel ecdh_generic snd_pcm input_polldev intel_cstate ecc intel_uncore thunderbolt snd_timer i2c_i801 libarc4 rfkill intel_rapl_perf lpc_ich mei_me pcspkr bcm5974 snd bcma mei soundcore acpi_als sbs kfifo_buf sbshc industrialio apple_bl i915 i2c_algo_bit drm_kms_helper drm uas crc32c_intel usb_storage video hid_apple [ 88.320630] CR2: 0000000000000018 [ 88.320633] ---[ end trace 933491c8a4fadeb7 ]--- [ 88.320642] RIP: 0010:hidpp_probe+0x61f/0x948 [hid_logitech_hidpp] [ 88.320645] Code: 81 00 00 48 89 ef e8 f0 d6 ff ff 41 89 c6 85 c0 75 b5 0f b6 44 24 28 48 8b 5d 00 88 44 24 1e 89 44 24 0c 48 8b 83 18 1c 00 00 <48> 8b 48 18 48 8b 83 10 19 00 00 48 8b 40 40 48 89 0c 24 0f b7 80 [ 88.320647] RSP: 0018:ffffb0a6824aba68 EFLAGS: 00010246 [ 88.320650] RAX: 0000000000000000 RBX: ffff93a50756e000 RCX: 0000000000010408 [ 88.320652] RDX: 0000000000000000 RSI: ffff93a51f0ad0a0 RDI: 000000000002d0a0 [ 88.320655] RBP: ffff93a50416da28 R08: ffff93a50416da70 R09: ffff93a50416da70 [ 88.320657] R10: 000000148ae9e60c R11: 00000000000f1525 R12: ffff93a50756e000 [ 88.320659] R13: ffff93a50756f8d0 R14: 0000000000000000 R15: ffff93a50756fc38 [ 88.320662] FS: 00007f8d8c1e0940(0000) GS:ffff93a51f080000(0000) knlGS:0000000000000000 [ 88.320664] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.320667] CR2: 0000000000000018 CR3: 00000003996d8003 CR4: 00000000001606e0 To solve this issue: 1. Split g920_get_config() such that all of the device specific communication remains a part of the function and input subsystem initialization bits go to hidpp_ff_init() 2. Move call to hidpp_ff_init() from being a part of g920_get_config() to be the last step of .probe(), right after a call to hid_hw_start() with connect_mask containing HID_CONNECT_HIDINPUT. Fixes: 91cf9a9 ("HID: logitech-hidpp: make .probe usbhid capable") Signed-off-by: Andrey Smirnov <[email protected]> Tested-by: Sam Bazley <[email protected]> Cc: Jiri Kosina <[email protected]> Cc: Benjamin Tissoires <[email protected]> Cc: Henrik Rydberg <[email protected]> Cc: Pierre-Loup A. Griffais <[email protected]> Cc: Austin Palmer <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] # 5.2+ Signed-off-by: Benjamin Tissoires <[email protected]>

syzkaller managed to trigger the following crash: [...] BUG: unable to handle page fault for address: ffffc90001923030 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD aa551067 P4D aa551067 PUD aa552067 PMD a572b067 PTE 80000000a1173163 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 7982 Comm: syz-executor912 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bpf_jit_binary_hdr include/linux/filter.h:787 [inline] RIP: 0010:bpf_get_prog_addr_region kernel/bpf/core.c:531 [inline] RIP: 0010:bpf_tree_comp kernel/bpf/core.c:600 [inline] RIP: 0010:__lt_find include/linux/rbtree_latch.h:115 [inline] RIP: 0010:latch_tree_find include/linux/rbtree_latch.h:208 [inline] RIP: 0010:bpf_prog_kallsyms_find kernel/bpf/core.c:674 [inline] RIP: 0010:is_bpf_text_address+0x184/0x3b0 kernel/bpf/core.c:709 [...] Call Trace: kernel_text_address kernel/extable.c:147 [inline] __kernel_text_address+0x9a/0x110 kernel/extable.c:102 unwind_get_return_address+0x4c/0x90 arch/x86/kernel/unwind_frame.c:19 arch_stack_walk+0x98/0xe0 arch/x86/kernel/stacktrace.c:26 stack_trace_save+0xb6/0x150 kernel/stacktrace.c:123 save_stack mm/kasan/common.c:69 [inline] set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc+0x11c/0x1b0 mm/kasan/common.c:510 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:518 slab_post_alloc_hook mm/slab.h:584 [inline] slab_alloc mm/slab.c:3319 [inline] kmem_cache_alloc+0x1f5/0x2e0 mm/slab.c:3483 getname_flags+0xba/0x640 fs/namei.c:138 getname+0x19/0x20 fs/namei.c:209 do_sys_open+0x261/0x560 fs/open.c:1091 __do_sys_open fs/open.c:1115 [inline] __se_sys_open fs/open.c:1110 [inline] __x64_sys_open+0x87/0x90 fs/open.c:1110 do_syscall_64+0xf7/0x1c0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe [...] After further debugging it turns out that we walk kallsyms while in parallel we tear down a BPF program which contains subprograms that have been JITed though the program itself has not been fully exposed and is eventually bailing out with error. The bpf_prog_kallsyms_del_subprogs() in bpf_prog_load()'s error path removes the symbols, however, bpf_prog_free() tears down the JIT memory too early via scheduled work. Instead, it needs to properly respect RCU grace period as the kallsyms walk for BPF is under RCU. Fix it by refactoring __bpf_prog_put()'s tear down and reuse it in our error path where we defer final destruction when we have subprogs in the program. Fixes: 7d1982b ("bpf: fix panic in prog load calls cleanup") Fixes: 1c2a088 ("bpf: x64: add JIT support for multi-function programs") Reported-by: [email protected] Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Tested-by: [email protected] Link: https://lore.kernel.org/bpf/55f6367324c2d7e9583fa9ccf5385dcbba0d7a6e.1571752452.git.daniel@iogearbox.net

All bonding device has same lockdep key and subclass is initialized with nest_level. But actual nest_level value can be changed when a lower device is attached. And at this moment, the subclass should be updated but it seems to be unsafe. So this patch makes bonding use dynamic lockdep key instead of the subclass. Test commands: ip link add bond0 type bond for i in {1..5} do let A=$i-1 ip link add bond$i type bond ip link set bond$i master bond$A done ip link set bond5 master bond0 Splat looks like: [ 307.992912] WARNING: possible recursive locking detected [ 307.993656] 5.4.0-rc3+ linux-kernel-labs#96 Tainted: G W [ 307.994367] -------------------------------------------- [ 307.995092] ip/761 is trying to acquire lock: [ 307.995710] ffff8880513aac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding] [ 307.997045] but task is already holding lock: [ 307.997923] ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding] [ 307.999215] other info that might help us debug this: [ 308.000251] Possible unsafe locking scenario: [ 308.001137] CPU0 [ 308.001533] ---- [ 308.001915] lock(&(&bond->stats_lock)->rlock#2/2); [ 308.002609] lock(&(&bond->stats_lock)->rlock#2/2); [ 308.003302] *** DEADLOCK *** [ 308.004310] May be due to missing lock nesting notation [ 308.005319] 3 locks held by ip/761: [ 308.005830] #0: ffffffff9fcc42b0 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x466/0x8a0 [ 308.006894] #1: ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding] [ 308.008243] #2: ffffffff9f9219c0 (rcu_read_lock){....}, at: bond_get_stats+0x9f/0x500 [bonding] [ 308.009422] stack backtrace: [ 308.010124] CPU: 0 PID: 761 Comm: ip Tainted: G W 5.4.0-rc3+ linux-kernel-labs#96 [ 308.011097] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 308.012179] Call Trace: [ 308.012601] dump_stack+0x7c/0xbb [ 308.013089] __lock_acquire+0x269d/0x3de0 [ 308.013669] ? register_lock_class+0x14d0/0x14d0 [ 308.014318] lock_acquire+0x164/0x3b0 [ 308.014858] ? bond_get_stats+0xb8/0x500 [bonding] [ 308.015520] _raw_spin_lock_nested+0x2e/0x60 [ 308.016129] ? bond_get_stats+0xb8/0x500 [bonding] [ 308.017215] bond_get_stats+0xb8/0x500 [bonding] [ 308.018454] ? bond_arp_rcv+0xf10/0xf10 [bonding] [ 308.019710] ? rcu_read_lock_held+0x90/0xa0 [ 308.020605] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 308.021286] ? bond_get_stats+0x9f/0x500 [bonding] [ 308.021953] dev_get_stats+0x1ec/0x270 [ 308.022508] bond_get_stats+0x1d1/0x500 [bonding] Fixes: d3fff6c ("net: add netdev_lockdep_set_classes() helper") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>

team interface could be nested and it's lock variable could be nested too. But this lock uses static lockdep key and there is no nested locking handling code such as mutex_lock_nested() and so on. so the Lockdep would warn about the circular locking scenario that couldn't happen. In order to fix, this patch makes the team module to use dynamic lock key instead of static key. Test commands: ip link add team0 type team ip link add team1 type team ip link set team0 master team1 ip link set team0 nomaster ip link set team1 master team0 ip link set team1 nomaster Splat that looks like: [ 40.364352] WARNING: possible recursive locking detected [ 40.364964] 5.4.0-rc3+ linux-kernel-labs#96 Not tainted [ 40.365405] -------------------------------------------- [ 40.365973] ip/750 is trying to acquire lock: [ 40.366542] ffff888060b34c40 (&team->lock){+.+.}, at: team_set_mac_address+0x151/0x290 [team] [ 40.367689] but task is already holding lock: [ 40.368729] ffff888051201c40 (&team->lock){+.+.}, at: team_del_slave+0x29/0x60 [team] [ 40.370280] other info that might help us debug this: [ 40.371159] Possible unsafe locking scenario: [ 40.371942] CPU0 [ 40.372338] ---- [ 40.372673] lock(&team->lock); [ 40.373115] lock(&team->lock); [ 40.373549] *** DEADLOCK *** [ 40.374432] May be due to missing lock nesting notation [ 40.375338] 2 locks held by ip/750: [ 40.375851] #0: ffffffffabcc42b0 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x466/0x8a0 [ 40.376927] #1: ffff888051201c40 (&team->lock){+.+.}, at: team_del_slave+0x29/0x60 [team] [ 40.377989] stack backtrace: [ 40.378650] CPU: 0 PID: 750 Comm: ip Not tainted 5.4.0-rc3+ linux-kernel-labs#96 [ 40.379368] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 40.380574] Call Trace: [ 40.381208] dump_stack+0x7c/0xbb [ 40.381959] __lock_acquire+0x269d/0x3de0 [ 40.382817] ? register_lock_class+0x14d0/0x14d0 [ 40.383784] ? check_chain_key+0x236/0x5d0 [ 40.384518] lock_acquire+0x164/0x3b0 [ 40.385074] ? team_set_mac_address+0x151/0x290 [team] [ 40.385805] __mutex_lock+0x14d/0x14c0 [ 40.386371] ? team_set_mac_address+0x151/0x290 [team] [ 40.387038] ? team_set_mac_address+0x151/0x290 [team] [ 40.387632] ? mutex_lock_io_nested+0x1380/0x1380 [ 40.388245] ? team_del_slave+0x60/0x60 [team] [ 40.388752] ? rcu_read_lock_sched_held+0x90/0xc0 [ 40.389304] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 40.389819] ? lock_acquire+0x164/0x3b0 [ 40.390285] ? lockdep_rtnl_is_held+0x16/0x20 [ 40.390797] ? team_port_get_rtnl+0x90/0xe0 [team] [ 40.391353] ? __module_text_address+0x13/0x140 [ 40.391886] ? team_set_mac_address+0x151/0x290 [team] [ 40.392547] team_set_mac_address+0x151/0x290 [team] [ 40.393111] dev_set_mac_address+0x1f0/0x3f0 [ ... ] Fixes: 3d249d4 ("net: introduce ethernet teaming device") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>

Recent cleanup in the way EEH support is added to a device causes a kernel oops when the cxl driver probes a device and creates virtual devices discovered on the FPGA: BUG: Kernel NULL pointer dereference at 0x000000a0 Faulting instruction address: 0xc000000000048070 Oops: Kernel access of bad area, sig: 7 [#1] ... NIP eeh_add_device_late.part.9+0x50/0x1e0 LR eeh_add_device_late.part.9+0x3c/0x1e0 Call Trace: _dev_info+0x5c/0x6c (unreliable) pnv_pcibios_bus_add_device+0x60/0xb0 pcibios_bus_add_device+0x40/0x60 pci_bus_add_device+0x30/0x100 pci_bus_add_devices+0x64/0xd0 cxl_pci_vphb_add+0xe0/0x130 [cxl] cxl_probe+0x504/0x5b0 [cxl] local_pci_probe+0x6c/0x110 work_for_cpu_fn+0x38/0x60 The root cause is that those cxl virtual devices don't have a representation in the device tree and therefore no associated pci_dn structure. In eeh_add_device_late(), pdn is NULL, so edev is NULL and we oops. We never had explicit support for EEH for those virtual devices. Instead, EEH events are reported to the (real) pci device and handled by the cxl driver. Which can then forward to the virtual devices and handle dependencies. The fact that we try adding EEH support for the virtual devices is new and a side-effect of the recent cleanup. This patch fixes it by skipping adding EEH support on powernv for devices which don't have a pci_dn structure. The cxl driver doesn't create virtual devices on pseries so this patch doesn't fix it there intentionally. Fixes: b905f8c ("powerpc/eeh: EEH for pSeries hot plug") Signed-off-by: Frederic Barrat <[email protected]> Reviewed-by: Sam Bobroff <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]

…gnal When a task that is allocating metadata needs to wait for the async reclaim job to process its ticket and gets a signal (because it was killed for example) before doing the wait, the task ends up erroring out but with space reserved for its ticket, which never gets released, resulting in a metadata space leak (more specifically a leak in the bytes_may_use counter of the metadata space_info object). Here's the sequence of steps leading to the space leak: 1) A task tries to create a file for example, so it ends up trying to start a transaction at btrfs_create(); 2) The filesystem is currently in a state where there is not enough metadata free space to satisfy the transaction's needs. So at space-info.c:__reserve_metadata_bytes() we create a ticket and add it to the list of tickets of the space info object. Also, because the metadata async reclaim job is not running, we queue a job ro run metadata reclaim; 3) In the meanwhile the task receives a signal (like SIGTERM from a kill command for example); 4) After queing the async reclaim job, at __reserve_metadata_bytes(), we unlock the metadata space info and call handle_reserve_ticket(); 5) That last function calls wait_reserve_ticket(), which acquires the lock from the metadata space info. Then in the first iteration of its while loop, it calls prepare_to_wait_event(), which returns -ERESTARTSYS because the task has a pending signal. As a result, we set the error field of the ticket to -EINTR and exit the while loop without deleting the ticket from the list of tickets (in the space info object). After exiting the loop we unlock the space info; 6) The async reclaim job is able to release enough metadata, acquires the metadata space info's lock and then reserves space for the ticket, since the ticket is still in the list of (non-priority) tickets. The space reservation happens at btrfs_try_granting_tickets(), called from maybe_fail_all_tickets(). This increments the bytes_may_use counter from the metadata space info object, sets the ticket's bytes field to zero (meaning success, that space was reserved) and removes it from the list of tickets; 7) wait_reserve_ticket() returns, with the error field of the ticket set to -EINTR. Then handle_reserve_ticket() just propagates that error to the caller. Because an error was returned, the caller does not release the reserved space, since the expectation is that any error means no space was reserved. Fix this by removing the ticket from the list, while holding the space info lock, at wait_reserve_ticket() when prepare_to_wait_event() returns an error. Also add some comments and an assertion to guarantee we never end up with a ticket that has an error set and a bytes counter field set to zero, to more easily detect regressions in the future. This issue could be triggered sporadically by some test cases from fstests such as generic/269 for example, which tries to fill a filesystem and then kills fsstress processes running in the background. When this issue happens, we get a warning in syslog/dmesg when unmounting the filesystem, like the following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 13240 at fs/btrfs/block-group.c:3186 btrfs_free_block_groups+0x314/0x470 [btrfs] (...) CPU: 0 PID: 13240 Comm: umount Tainted: G W L 5.3.0-rc8-btrfs-next-48+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_free_block_groups+0x314/0x470 [btrfs] (...) RSP: 0018:ffff9910c14cfdb8 EFLAGS: 00010286 RAX: 0000000000000024 RBX: ffff89cd8a4d55f0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff89cdf6a178a8 RDI: ffff89cdf6a178a8 RBP: ffff9910c14cfde8 R08: 0000000000000000 R09: 0000000000000001 R10: ffff89cd4d618040 R11: 0000000000000000 R12: ffff89cd8a4d5508 R13: ffff89cde7c4a600 R14: dead000000000122 R15: dead000000000100 FS: 00007f42754432c0(0000) GS:ffff89cdf6a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd25a47f730 CR3: 000000021f8d6006 CR4: 00000000003606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: close_ctree+0x1ad/0x390 [btrfs] generic_shutdown_super+0x6c/0x110 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0xa0 [btrfs] deactivate_locked_super+0x3a/0x70 cleanup_mnt+0xb4/0x160 task_work_run+0x7e/0xc0 exit_to_usermode_loop+0xfa/0x100 do_syscall_64+0x1cb/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f4274d2cb37 (...) RSP: 002b:00007ffcff701d38 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 0000557ebde2f060 RCX: 00007f4274d2cb37 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000557ebde2f240 RBP: 0000557ebde2f240 R08: 0000557ebde2f270 R09: 0000000000000015 R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f427522ee64 R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffcff701fc0 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffffb12b561e>] copy_process+0x75e/0x1fd0 softirqs last enabled at (0): [<ffffffffb12b561e>] copy_process+0x75e/0x1fd0 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace bcf4b235461b26f6 ]--- BTRFS info (device sdb): space_info 4 has 19116032 free, is full BTRFS info (device sdb): space_info total=33554432, used=14176256, pinned=0, reserved=0, may_use=196608, readonly=65536 BTRFS info (device sdb): global_block_rsv: size 0 reserved 0 BTRFS info (device sdb): trans_block_rsv: size 0 reserved 0 BTRFS info (device sdb): chunk_block_rsv: size 0 reserved 0 BTRFS info (device sdb): delayed_block_rsv: size 0 reserved 0 BTRFS info (device sdb): delayed_refs_rsv: size 0 reserved 0 Fixes: 374bf9c ("btrfs: unify error handling for ticket flushing") Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>

Since commit a211b8c ("ARM: dts: imx6qdl-sabreauto: Add sensors") a storm of accelerometer interrupts is seen: [ 114.211283] irq 260: nobody cared (try booting with the "irqpoll" option) [ 114.218108] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.4 #1 [ 114.223960] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 114.230531] [<c0112858>] (unwind_backtrace) from [<c010cdc8>] (show_stack+0x10/0x14) [ 114.238301] [<c010cdc8>] (show_stack) from [<c0c1aa1c>] (dump_stack+0xd8/0x110) [ 114.245644] [<c0c1aa1c>] (dump_stack) from [<c0193594>] (__report_bad_irq+0x30/0xc0) [ 114.253417] [<c0193594>] (__report_bad_irq) from [<c01933ac>] (note_interrupt+0x108/0x298) [ 114.261707] [<c01933ac>] (note_interrupt) from [<c018ffe4>] (handle_irq_event_percpu+0x70/0x80) [ 114.270433] [<c018ffe4>] (handle_irq_event_percpu) from [<c019002c>] (handle_irq_event+0x38/0x5c) [ 114.279326] [<c019002c>] (handle_irq_event) from [<c019438c>] (handle_level_irq+0xc8/0x154) [ 114.287701] [<c019438c>] (handle_level_irq) from [<c018eda0>] (generic_handle_irq+0x20/0x34) [ 114.296166] [<c018eda0>] (generic_handle_irq) from [<c0534214>] (mxc_gpio_irq_handler+0x30/0xf0) [ 114.304975] [<c0534214>] (mxc_gpio_irq_handler) from [<c0534334>] (mx3_gpio_irq_handler+0x60/0xb0) [ 114.313955] [<c0534334>] (mx3_gpio_irq_handler) from [<c018eda0>] (generic_handle_irq+0x20/0x34) [ 114.322762] [<c018eda0>] (generic_handle_irq) from [<c018f3ac>] (__handle_domain_irq+0x64/0xe0) [ 114.331485] [<c018f3ac>] (__handle_domain_irq) from [<c05215a8>] (gic_handle_irq+0x4c/0xa8) [ 114.339862] [<c05215a8>] (gic_handle_irq) from [<c0101a70>] (__irq_svc+0x70/0x98) [ 114.347361] Exception stack(0xc1301ec0 to 0xc1301f08) [ 114.352435] 1ec0: 00000001 00000006 00000000 c130c340 00000001 c130f688 9785636d c13ea2e8 [ 114.360635] 1ee0: 9784907d 0000001a eaf99d78 0000001a 00000000 c1301f10 c0182b00 c0878de4 [ 114.368830] 1f00: 20000013 ffffffff [ 114.372349] [<c0101a70>] (__irq_svc) from [<c0878de4>] (cpuidle_enter_state+0x168/0x5f4) [ 114.380464] [<c0878de4>] (cpuidle_enter_state) from [<c08792ac>] (cpuidle_enter+0x28/0x38) [ 114.388751] [<c08792ac>] (cpuidle_enter) from [<c015ef9c>] (do_idle+0x224/0x2a8) [ 114.396168] [<c015ef9c>] (do_idle) from [<c015f3b8>] (cpu_startup_entry+0x18/0x20) [ 114.403765] [<c015f3b8>] (cpu_startup_entry) from [<c1200e54>] (start_kernel+0x43c/0x500) [ 114.411958] handlers: [ 114.414302] [<a01028b8>] irq_default_primary_handler threaded [<fd7a3b08>] mma8452_interrupt [ 114.422974] Disabling IRQ linux-kernel-labs#260 CPU0 CPU1 .... 260: 100001 0 gpio-mxc 31 Level mma8451 The MMA8451 interrupt triggers as low level, so the GPIO6_IO31 pin needs to activate its pull up, otherwise it will stay always at low level generating multiple interrupts. The current device tree does not configure the IOMUX for this pin, so it uses whathever comes configured from the bootloader. The IOMUXC_SW_PAD_CTL_PAD_EIM_BCLK register value comes as 0x8000 from the bootloader, which has PKE bit cleared, hence disabling the pull-up. Instead of relying on a previous configuration from the bootloader, configure the GPIO6_IO31 pin with pull-up enabled in order to fix this problem. Fixes: a211b8c ("ARM: dts: imx6qdl-sabreauto: Add sensors") Signed-off-by: Fabio Estevam <[email protected]> Reviewed-By: Leonard Crestez <[email protected]> Signed-off-by: Shawn Guo <[email protected]>

We meet several NULL pointer issues if configfs_composite_unbind and composite_setup (or composite_disconnect) are running together. These issues occur when do the function switch stress test, the configfs_compsoite_unbind is called from user mode by echo "" to /sys/../UDC entry, and meanwhile, the setup interrupt or disconnect interrupt occurs by hardware. The composite_setup will get the cdev from get_gadget_data, but configfs_composite_unbind will set gadget data as NULL, so the NULL pointer issue occurs. This concurrent is hard to reproduce by native kernel, but can be reproduced by android kernel. In this commit, we introduce one spinlock belongs to structure gadget_info since we can't use the same spinlock in usb_composite_dev due to exclusive running together between composite_setup and configfs_composite_unbind. And one bit flag 'unbind' to indicate the code is at unbind routine, this bit is needed due to we release the lock at during configfs_composite_unbind sometimes, and composite_setup may be run at that time. Several oops: oops 1: android_work: sent uevent USB_STATE=CONNECTED configfs-gadget gadget: super-speed config #1: b android_work: sent uevent USB_STATE=CONFIGURED init: Received control message 'start' for 'adbd' from pid: 3515 (system_server) Unable to handle kernel NULL pointer dereference at virtual address 0000002a init: Received control message 'stop' for 'adbd' from pid: 3375 (/vendor/bin/hw/[email protected]) Mem abort info: Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgd = ffff8008f1b7f000 [000000000000002a] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 4 PID: 2457 Comm: irq/125-5b11000 Not tainted 4.14.98-07846-g0b40a9b-dirty linux-kernel-labs#16 Hardware name: Freescale i.MX8QM MEK (DT) task: ffff8008f2a98000 task.stack: ffff00000b7b8000 PC is at composite_setup+0x44/0x1508 LR is at android_setup+0xb8/0x13c pc : [<ffff0000089ffb3c>] lr : [<ffff000008a032fc>] pstate: 800001c5 sp : ffff00000b7bbb80 x29: ffff00000b7bbb80 x28: ffff8008f2a3c010 x27: 0000000000000001 x26: 0000000000000000 [1232/1897] audit: audit_lost=25791 audit_rate_limit=5 audit_backlog_limit=64 x25: 00000000ffffffa1 x24: ffff8008f2a3c010 audit: rate limit exceeded x23: 0000000000000409 x22: ffff000009c8e000 x21: ffff8008f7a8b428 x20: ffff00000afae000 x19: ffff0000089ff000 x18: 0000000000000000 x17: 0000000000000000 x16: ffff0000082b7c9c x15: 0000000000000000 x14: f1866f5b952aca46 x13: e35502e30d44349c x12: 0000000000000008 x11: 0000000000000008 x10: 0000000000000a30 x9 : ffff00000b7bbd00 x8 : ffff8008f2a98a90 x7 : ffff8008f27a9c90 x6 : 0000000000000001 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000006 x1 : ffff0000089ff8d0 x0 : 732a010310b9ed00 X7: 0xffff8008f27a9c10: 9c10 00000002 00000000 00000001 00000000 13110000 ffff0000 00000002 00208040 9c30 00000000 00000000 00000000 00000000 00000000 00000005 00000029 00000000 9c50 00051778 00000001 f27a8e00 ffff8008 00000005 00000000 00000078 00000078 9c70 00000078 00000000 09031d48 ffff0000 00100000 00000000 00400000 00000000 9c90 00000001 00000000 00000000 00000000 00000000 00000000 ffefb1a0 ffff8008 9cb0 f27a9ca8 ffff8008 00000000 00000000 b9d88037 00000173 1618a3eb 00000001 9cd0 870a792a 0000002e 16188fe6 00000001 0000242b 00000000 00000000 00000000 using random self ethernet address 9cf0 019a4646 00000000 000547f3 00000000 ecfd6c33 00000002 00000000 using random host ethernet address 00000000 X8: 0xffff8008f2a98a10: 8a10 00000000 00000000 f7788d00 ffff8008 00000001 00000000 00000000 00000000 8a30 eb218000 ffff8008 f2a98000 ffff8008 f2a98000 ffff8008 09885000 ffff0000 8a50 f34df480 ffff8008 00000000 00000000 f2a98648 ffff8008 09c8e000 ffff0000 8a70 fff2c800 ffff8008 09031d48 ffff0000 0b7bbd00 ffff0000 0b7bbd00 ffff0000 8a90 080861bc ffff0000 00000000 00000000 00000000 00000000 00000000 00000000 8ab0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8ad0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8af0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 X21: 0xffff8008f7a8b3a8: b3a8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b3c8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b3e8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b408 00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000 b428 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b448 0053004d 00540046 00300031 00010030 eb07b520 ffff8008 20011201 00000003 b468 e418d109 0104404e 00010302 00000000 eb07b558 ffff8008 eb07b558 ffff8008 b488 f7a8b488 ffff8008 f7a8b488 ffff8008 f7a8b300 ffff8008 00000000 00000000 X24: 0xffff8008f2a3bf90: bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000 c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008 c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008 X28: 0xffff8008f2a3bf90: bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000 c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008 c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008 Process irq/125-5b11000 (pid: 2457, stack limit = 0xffff00000b7b8000) Call trace: Exception stack(0xffff00000b7bba40 to 0xffff00000b7bbb80) ba40: 732a010310b9ed00 ffff0000089ff8d0 0000000000000006 0000000000000000 ba60: 0000000000000001 0000000000000000 0000000000000001 ffff8008f27a9c90 ba80: ffff8008f2a98a90 ffff00000b7bbd00 0000000000000a30 0000000000000008 baa0: 0000000000000008 e35502e30d44349c f1866f5b952aca46 0000000000000000 bac0: ffff0000082b7c9c 0000000000000000 0000000000000000 ffff0000089ff000 bae0: ffff00000afae000 ffff8008f7a8b428 ffff000009c8e000 0000000000000409 bb00: ffff8008f2a3c010 00000000ffffffa1 0000000000000000 0000000000000001 bb20: ffff8008f2a3c010 ffff00000b7bbb80 ffff000008a032fc ffff00000b7bbb80 bb40: ffff0000089ffb3c 00000000800001c5 ffff00000b7bbb80 732a010310b9ed00 bb60: ffffffffffffffff ffff0000080f777c ffff00000b7bbb80 ffff0000089ffb3c [<ffff0000089ffb3c>] composite_setup+0x44/0x1508 [<ffff000008a032fc>] android_setup+0xb8/0x13c [<ffff0000089bd9a8>] cdns3_ep0_delegate_req+0x44/0x70 [<ffff0000089bdff4>] cdns3_check_ep0_interrupt_proceed+0x33c/0x654 [<ffff0000089bca44>] cdns3_device_thread_irq_handler+0x4b0/0x4bc [<ffff0000089b77b4>] cdns3_thread_irq+0x48/0x68 [<ffff000008145bf0>] irq_thread_fn+0x28/0x88 [<ffff000008145e38>] irq_thread+0x13c/0x228 [<ffff0000080fed70>] kthread+0x104/0x130 [<ffff000008085064>] ret_from_fork+0x10/0x18 oops2: composite_disconnect: Calling disconnect on a Gadget that is not connected android_work: did not send uevent (0 0 (null)) init: Received control message 'stop' for 'adbd' from pid: 3359 (/vendor/bin/hw/[email protected]) init: Sending signal 9 to service 'adbd' (pid 22343) process group... ------------[ cut here ]------------ audit: audit_lost=180038 audit_rate_limit=5 audit_backlog_limit=64 audit: rate limit exceeded WARNING: CPU: 0 PID: 3468 at kernel_imx/drivers/usb/gadget/composite.c:2009 composite_disconnect+0x80/0x88 Modules linked in: CPU: 0 PID: 3468 Comm: HWC-UEvent-Thre Not tainted 4.14.98-07846-g0b40a9b-dirty linux-kernel-labs#16 Hardware name: Freescale i.MX8QM MEK (DT) task: ffff8008f2349c00 task.stack: ffff00000b0a8000 PC is at composite_disconnect+0x80/0x88 LR is at composite_disconnect+0x80/0x88 pc : [<ffff0000089ff9b0>] lr : [<ffff0000089ff9b0>] pstate: 600001c5 sp : ffff000008003dd0 x29: ffff000008003dd0 x28: ffff8008f2349c00 x27: ffff000009885018 x26: ffff000008004000 Timeout for IPC response! x25: ffff000009885018 x24: ffff000009c8e280 x23: ffff8008f2d98010 x22: 00000000000001c0 x21: ffff8008f2d98394 x20: ffff8008f2d98010 x19: 0000000000000000 x18: 0000e3956f4f075a fxos8700 4-001e: i2c block read acc failed x17: 0000e395735727e8 x16: ffff00000829f4d4 x15: ffffffffffffffff x14: 7463656e6e6f6320 x13: 746f6e2009090920 x12: 7369207461687420 x11: 7465676461472061 x10: 206e6f207463656e x9 : 6e6f637369642067 x8 : ffff000009c8e280 x7 : ffff0000086ca6cc x6 : ffff000009f15e78 x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffffffffffffff x2 : c3f28b86000c3900 x1 : c3f28b86000c3900 x0 : 000000000000004e X20: 0xffff8008f2d97f90: 7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 libprocessgroup: Failed to kill process cgroup uid 0 pid 22343 in 215ms, 1 processes remain 7fd0 Timeout for IPC response! 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 using random self ethernet address 7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc using random host ethernet address ffff0000 8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008 8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008 X21: 0xffff8008f2d98314: 8314 ffff8008 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8334 00000000 00000000 00000000 00000000 00000000 08a04cf4 ffff0000 00000000 8354 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8374 00000000 00000000 00000000 00001001 00000000 00000000 00000000 00000000 8394 e4bbe4bb 0f230000 ffff0000 0afae000 ffff0000 ae001000 00000000 f206d400 Timeout for IPC response! 83b4 ffff8008 00000000 00000000 f7957b18 ffff8008 f7957718 ffff8008 f7957018 83d4 ffff8008 f7957118 ffff8008 f7957618 ffff8008 f7957818 ffff8008 f7957918 83f4 ffff8008 f7957d18 ffff8008 00000000 00000000 00000000 00000000 00000000 X23: 0xffff8008f2d97f90: 7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc ffff0000 8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008 8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008 X28: 0xffff8008f2349b80: 9b80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9ba0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9bc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9be0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9c00 00000022 00000000 ffffffff ffffffff 00010001 00000000 00000000 00000000 9c20 0b0a8000 ffff0000 00000002 00404040 00000000 00000000 00000000 00000000 9c40 00000001 00000000 00000001 00000000 001ebd44 00000001 f390b800 ffff8008 9c60 00000000 00000001 00000070 00000070 00000070 00000000 09031d48 ffff0000 Call trace: Exception stack(0xffff000008003c90 to 0xffff000008003dd0) 3c80: 000000000000004e c3f28b86000c3900 3ca0: c3f28b86000c3900 ffffffffffffffff 0000000000000000 0000000000000000 3cc0: ffff000009f15e78 ffff0000086ca6cc ffff000009c8e280 6e6f637369642067 3ce0: 206e6f207463656e 7465676461472061 7369207461687420 746f6e2009090920 3d00: 7463656e6e6f6320 ffffffffffffffff ffff00000829f4d4 0000e395735727e8 3d20: 0000e3956f4f075a 0000000000000000 ffff8008f2d98010 ffff8008f2d98394 3d40: 00000000000001c0 ffff8008f2d98010 ffff000009c8e280 ffff000009885018 3d60: ffff000008004000 ffff000009885018 ffff8008f2349c00 ffff000008003dd0 3d80: ffff0000089ff9b0 ffff000008003dd0 ffff0000089ff9b0 00000000600001c5 3da0: ffff8008f33f2cd8 0000000000000000 0000ffffffffffff 0000000000000000 init: Received control message 'start' for 'adbd' from pid: 3359 (/vendor/bin/hw/[email protected]) 3dc0: ffff000008003dd0 ffff0000089ff9b0 [<ffff0000089ff9b0>] composite_disconnect+0x80/0x88 [<ffff000008a044d4>] android_disconnect+0x3c/0x68 [<ffff0000089ba9f8>] cdns3_device_irq_handler+0xfc/0x2c8 [<ffff0000089b84c0>] cdns3_irq+0x44/0x94 [<ffff00000814494c>] __handle_irq_event_percpu+0x60/0x24c [<ffff000008144c0c>] handle_irq_event+0x58/0xc0 [<ffff00000814873c>] handle_fasteoi_irq+0x98/0x180 [<ffff000008143a10>] generic_handle_irq+0x24/0x38 [<ffff000008144170>] __handle_domain_irq+0x60/0xac [<ffff0000080819c4>] gic_handle_irq+0xd4/0x17c Signed-off-by: Peter Chen <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>

The mkey_table xarray is touched by the reg_mr_callback() function which is called from a hard irq. Thus all other uses of xa_lock must use the _irq variants. WARNING: inconsistent lock state 5.4.0-rc1 linux-kernel-labs#12 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. python3/343 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888182be1d40 (&(&xa->xa_lock)->rlock#3){?.-.}, at: xa_erase+0x12/0x30 {IN-HARDIRQ-W} state was registered at: lock_acquire+0xe1/0x200 _raw_spin_lock_irqsave+0x35/0x50 reg_mr_callback+0x2dd/0x450 [mlx5_ib] mlx5_cmd_exec_cb_handler+0x2c/0x70 [mlx5_core] mlx5_cmd_comp_handler+0x355/0x840 [mlx5_core] [..] Possible unsafe locking scenario: CPU0 ---- lock(&(&xa->xa_lock)->rlock#3); <Interrupt> lock(&(&xa->xa_lock)->rlock#3); *** DEADLOCK *** 2 locks held by python3/343: #0: ffff88818eb4bd38 (&uverbs_dev->disassociate_srcu){....}, at: ib_uverbs_ioctl+0xe5/0x1e0 [ib_uverbs] #1: ffff888176c76d38 (&file->hw_destroy_rwsem){++++}, at: uobj_destroy+0x2d/0x90 [ib_uverbs] stack backtrace: CPU: 3 PID: 343 Comm: python3 Not tainted 5.4.0-rc1 linux-kernel-labs#12 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x86/0xca print_usage_bug.cold.50+0x2e5/0x355 mark_lock+0x871/0xb50 ? match_held_lock+0x20/0x250 ? check_usage_forwards+0x240/0x240 __lock_acquire+0x7de/0x23a0 ? __kasan_check_read+0x11/0x20 ? mark_lock+0xae/0xb50 ? mark_held_locks+0xb0/0xb0 ? find_held_lock+0xca/0xf0 lock_acquire+0xe1/0x200 ? xa_erase+0x12/0x30 _raw_spin_lock+0x2a/0x40 ? xa_erase+0x12/0x30 xa_erase+0x12/0x30 mlx5_ib_dealloc_mw+0x55/0xa0 [mlx5_ib] uverbs_dealloc_mw+0x3c/0x70 [ib_uverbs] uverbs_free_mw+0x1a/0x20 [ib_uverbs] destroy_hw_idr_uobject+0x49/0xa0 [ib_uverbs] [..] Fixes: 0417791 ("RDMA/mlx5: Add missing synchronize_srcu() for MW cases") Link: https://lore.kernel.org/r/[email protected] Acked-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>

Turns out hotplugging CPUs that are in exclusive cpusets can lead to the cpuset code feeding empty cpumasks to the sched domain rebuild machinery. This leads to the following splat: Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 235 Comm: kworker/5:2 Not tainted 5.4.0-rc1-00005-g8d495477d62e linux-kernel-labs#23 Hardware name: ARM Juno development board (r0) (DT) Workqueue: events cpuset_hotplug_workfn pstate: 60000005 (nZCv daif -PAN -UAO) pc : build_sched_domains (./include/linux/arch_topology.h:23 kernel/sched/topology.c:1898 kernel/sched/topology.c:1969) lr : build_sched_domains (kernel/sched/topology.c:1966) Call trace: build_sched_domains (./include/linux/arch_topology.h:23 kernel/sched/topology.c:1898 kernel/sched/topology.c:1969) partition_sched_domains_locked (kernel/sched/topology.c:2250) rebuild_sched_domains_locked (./include/linux/bitmap.h:370 ./include/linux/cpumask.h:538 kernel/cgroup/cpuset.c:955 kernel/cgroup/cpuset.c:978 kernel/cgroup/cpuset.c:1019) rebuild_sched_domains (kernel/cgroup/cpuset.c:1032) cpuset_hotplug_workfn (kernel/cgroup/cpuset.c:3205 (discriminator 2)) process_one_work (./arch/arm64/include/asm/jump_label.h:21 ./include/linux/jump_label.h:200 ./include/trace/events/workqueue.h:114 kernel/workqueue.c:2274) worker_thread (./include/linux/compiler.h:199 ./include/linux/list.h:268 kernel/workqueue.c:2416) kthread (kernel/kthread.c:255) ret_from_fork (arch/arm64/kernel/entry.S:1167) Code: f860dae2 912802d6 aa1603e1 12800000 (f8616853) The faulty line in question is: cap = arch_scale_cpu_capacity(cpumask_first(cpu_map)); and we're not checking the return value against nr_cpu_ids (we shouldn't have to!), which leads to the above. Prevent generate_sched_domains() from returning empty cpumasks, and add some assertion in build_sched_domains() to scream bloody murder if it happens again. The above splat was obtained on my Juno r0 with the following reproducer: $ cgcreate -g cpuset:asym $ cgset -r cpuset.cpus=0-3 asym $ cgset -r cpuset.mems=0 asym $ cgset -r cpuset.cpu_exclusive=1 asym $ cgcreate -g cpuset:smp $ cgset -r cpuset.cpus=4-5 smp $ cgset -r cpuset.mems=0 smp $ cgset -r cpuset.cpu_exclusive=1 smp $ cgset -r cpuset.sched_load_balance=0 . $ echo 0 > /sys/devices/system/cpu/cpu4/online $ echo 0 > /sys/devices/system/cpu/cpu5/online Signed-off-by: Valentin Schneider <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: [email protected] Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Fixes: 05484e0 ("sched/topology: Add SD_ASYM_CPUCAPACITY flag detection") Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>

When rmmod hip04_eth.ko, we can get the following warning: Task track: rmmod(1623)>bash(1591)>login(1581)>init(1) ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1623 at kernel/irq/manage.c:1557 __free_irq+0xa4/0x2ac() Trying to free already-free IRQ 200 Modules linked in: ping(O) pramdisk(O) cpuinfo(O) rtos_snapshot(O) interrupt_ctrl(O) mtdblock mtd_blkdevrtfs nfs_acl nfs lockd grace sunrpc xt_tcpudp ipt_REJECT iptable_filter ip_tables x_tables nf_reject_ipv CPU: 0 PID: 1623 Comm: rmmod Tainted: G O 4.4.193 #1 Hardware name: Hisilicon A15 [<c020b408>] (rtos_unwind_backtrace) from [<c0206624>] (show_stack+0x10/0x14) [<c0206624>] (show_stack) from [<c03f2be4>] (dump_stack+0xa0/0xd8) [<c03f2be4>] (dump_stack) from [<c021a780>] (warn_slowpath_common+0x84/0xb0) [<c021a780>] (warn_slowpath_common) from [<c021a7e8>] (warn_slowpath_fmt+0x3c/0x68) [<c021a7e8>] (warn_slowpath_fmt) from [<c026876c>] (__free_irq+0xa4/0x2ac) [<c026876c>] (__free_irq) from [<c0268a14>] (free_irq+0x60/0x7c) [<c0268a14>] (free_irq) from [<c0469e80>] (release_nodes+0x1c4/0x1ec) [<c0469e80>] (release_nodes) from [<c0466924>] (__device_release_driver+0xa8/0x104) [<c0466924>] (__device_release_driver) from [<c0466a80>] (driver_detach+0xd0/0xf8) [<c0466a80>] (driver_detach) from [<c0465e18>] (bus_remove_driver+0x64/0x8c) [<c0465e18>] (bus_remove_driver) from [<c02935b0>] (SyS_delete_module+0x198/0x1e0) [<c02935b0>] (SyS_delete_module) from [<c0202ed0>] (__sys_trace_return+0x0/0x10) ---[ end trace bb25d6123d849b44 ]--- Currently "rmmod hip04_eth.ko" call free_irq more than once as devres_release_all and hip04_remove both call free_irq. This results in a 'Trying to free already-free IRQ' warning. To solve the problem free_irq has been moved out of hip04_remove. Signed-off-by: Jiangfeng Xiao <[email protected]> Signed-off-by: David S. Miller <[email protected]>

This cures a panic on restart after a kexec operation on 5.3 and 5.4 kernels. The underlying state of the iommu registers (iommu->flags & VTD_FLAG_TRANS_PRE_ENABLED) on a restart results in a domain being marked as "DEFER_DEVICE_DOMAIN_INFO" that produces an Oops in identity_mapping(). [ 43.654737] BUG: kernel NULL pointer dereference, address: 0000000000000056 [ 43.655720] #PF: supervisor read access in kernel mode [ 43.655720] #PF: error_code(0x0000) - not-present page [ 43.655720] PGD 0 P4D 0 [ 43.655720] Oops: 0000 [#1] SMP PTI [ 43.655720] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.3.2-1940.el8uek.x86_64 #1 [ 43.655720] Hardware name: Oracle Corporation ORACLE SERVER X5-2/ASM,MOTHERBOARD,1U, BIOS 30140300 09/20/2018 [ 43.655720] RIP: 0010:iommu_need_mapping+0x29/0xd0 [ 43.655720] Code: 00 0f 1f 44 00 00 48 8b 97 70 02 00 00 48 83 fa ff 74 53 48 8d 4a ff b8 01 00 00 00 48 83 f9 fd 76 01 c3 48 8b 35 7f 58 e0 01 <48> 39 72 58 75 f2 55 48 89 e5 41 54 53 48 8b 87 28 02 00 00 4c 8b [ 43.655720] RSP: 0018:ffffc9000001b9b0 EFLAGS: 00010246 [ 43.655720] RAX: 0000000000000001 RBX: 0000000000001000 RCX: fffffffffffffffd [ 43.655720] RDX: fffffffffffffffe RSI: ffff8880719b8000 RDI: ffff8880477460b0 [ 43.655720] RBP: ffffc9000001b9e8 R08: 0000000000000000 R09: ffff888047c01700 [ 43.655720] R10: 00002194036fc692 R11: 0000000000000000 R12: 0000000000000000 [ 43.655720] R13: ffff8880477460b0 R14: 0000000000000cc0 R15: ffff888072d2b558 [ 43.655720] FS: 0000000000000000(0000) GS:ffff888071c00000(0000) knlGS:0000000000000000 [ 43.655720] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.655720] CR2: 0000000000000056 CR3: 000000007440a002 CR4: 00000000001606b0 [ 43.655720] Call Trace: [ 43.655720] ? intel_alloc_coherent+0x2a/0x180 [ 43.655720] ? __schedule+0x2c2/0x650 [ 43.655720] dma_alloc_attrs+0x8c/0xd0 [ 43.655720] dma_pool_alloc+0xdf/0x200 [ 43.655720] ehci_qh_alloc+0x58/0x130 [ 43.655720] ehci_setup+0x287/0x7ba [ 43.655720] ? _dev_info+0x6c/0x83 [ 43.655720] ehci_pci_setup+0x91/0x436 [ 43.655720] usb_add_hcd.cold.48+0x1d4/0x754 [ 43.655720] usb_hcd_pci_probe+0x2bc/0x3f0 [ 43.655720] ehci_pci_probe+0x39/0x40 [ 43.655720] local_pci_probe+0x47/0x80 [ 43.655720] pci_device_probe+0xff/0x1b0 [ 43.655720] really_probe+0xf5/0x3a0 [ 43.655720] driver_probe_device+0xbb/0x100 [ 43.655720] device_driver_attach+0x58/0x60 [ 43.655720] __driver_attach+0x8f/0x150 [ 43.655720] ? device_driver_attach+0x60/0x60 [ 43.655720] bus_for_each_dev+0x74/0xb0 [ 43.655720] driver_attach+0x1e/0x20 [ 43.655720] bus_add_driver+0x151/0x1f0 [ 43.655720] ? ehci_hcd_init+0xb2/0xb2 [ 43.655720] ? do_early_param+0x95/0x95 [ 43.655720] driver_register+0x70/0xc0 [ 43.655720] ? ehci_hcd_init+0xb2/0xb2 [ 43.655720] __pci_register_driver+0x57/0x60 [ 43.655720] ehci_pci_init+0x6a/0x6c [ 43.655720] do_one_initcall+0x4a/0x1fa [ 43.655720] ? do_early_param+0x95/0x95 [ 43.655720] kernel_init_freeable+0x1bd/0x262 [ 43.655720] ? rest_init+0xb0/0xb0 [ 43.655720] kernel_init+0xe/0x110 [ 43.655720] ret_from_fork+0x24/0x50 Fixes: 8af46c7 ("iommu/vt-d: Implement is_attach_deferred iommu ops entry") Cc: [email protected] # v5.3+ Signed-off-by: John Donnelly <[email protected]> Reviewed-by: Lu Baolu <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>

Invoking the following commands on a 32-bit architecture with strict alignment requirements (such as an ARMv7-based Raspberry Pi) results in an alignment exception: # nft add table ip test-ip4 # nft add chain ip test-ip4 output { type filter hook output priority 0; } # nft add rule ip test-ip4 output quota 1025 bytes Alignment trap: not handling instruction e1b26f9f at [<7f4473f8>] Unhandled fault: alignment exception (0x001) at 0xb832e824 Internal error: : 1 [#1] PREEMPT SMP ARM Hardware name: BCM2835 [<7f4473fc>] (nft_quota_do_init [nft_quota]) [<7f447448>] (nft_quota_init [nft_quota]) [<7f4260d0>] (nf_tables_newrule [nf_tables]) [<7f4168dc>] (nfnetlink_rcv_batch [nfnetlink]) [<7f416bd0>] (nfnetlink_rcv [nfnetlink]) [<8078b334>] (netlink_unicast) [<8078b664>] (netlink_sendmsg) [<8071b47c>] (sock_sendmsg) [<8071bd18>] (___sys_sendmsg) [<8071ce3c>] (__sys_sendmsg) [<8071ce94>] (sys_sendmsg) The reason is that nft_quota_do_init() calls atomic64_set() on an atomic64_t which is only aligned to 32-bit, not 64-bit, because it succeeds struct nft_expr in memory which only contains a 32-bit pointer. Fix by aligning the nft_expr private data to 64-bit. Fixes: 9651851 ("netfilter: add nftables") Signed-off-by: Lukas Wunner <[email protected]> Cc: [email protected] # v3.13+ Signed-off-by: Pablo Neira Ayuso <[email protected]>

nvme_mpath_clear_ctrl_paths() iterates through the ctrl->namespaces list while holding ctrl->scan_lock. This does not seem to be the correct way of protecting from concurrent list modification. Specifically, nvme_scan_work() sorts ctrl->namespaces AFTER unlocking scan_lock. This may result in the following (rare) crash in ctrl disconnect during scan_work: BUG: kernel NULL pointer dereference, address: 0000000000000050 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 3995 Comm: nvme 5.3.5-050305-generic RIP: 0010:nvme_mpath_clear_current_path+0xe/0x90 [nvme_core] ... Call Trace: nvme_mpath_clear_ctrl_paths+0x3c/0x70 [nvme_core] nvme_remove_namespaces+0x35/0xe0 [nvme_core] nvme_do_delete_ctrl+0x47/0x90 [nvme_core] nvme_sysfs_delete+0x49/0x60 [nvme_core] dev_attr_store+0x17/0x30 sysfs_kf_write+0x3e/0x50 kernfs_fop_write+0x11e/0x1a0 __vfs_write+0x1b/0x40 vfs_write+0xb9/0x1a0 ksys_write+0x67/0xe0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x5a/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f8d02bfb154 Fix: After taking scan_lock in nvme_mpath_clear_ctrl_paths() down_read(&ctrl->namespaces_rwsem) as well to make list traversal safe. This will not cause deadlocks because taking scan_lock never happens while holding the namespaces_rwsem. Moreover, scan work downs namespaces_rwsem in the same order. Alternative: sort ctrl->namespaces in nvme_scan_work() while still holding the scan_lock. This would leave nvme_mpath_clear_ctrl_paths() without correct protection against ctrl->namespaces modification by anyone other than scan_work. Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Anton Eidelman <[email protected]> Signed-off-by: Keith Busch <[email protected]>

__mem_cgroup_free() can be called on the failure path in mem_cgroup_alloc(). However memcg_flush_percpu_vmstats() and memcg_flush_percpu_vmevents() which are called from __mem_cgroup_free() access the fields of memcg which can potentially be null if called from failure path from mem_cgroup_alloc(). Indeed syzbot has reported the following crash: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 30393 Comm: syz-executor.1 Not tainted 5.4.0-rc2+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:memcg_flush_percpu_vmstats+0x4ae/0x930 mm/memcontrol.c:3436 Code: 05 41 89 c0 41 0f b6 04 24 41 38 c7 7c 08 84 c0 0f 85 5d 03 00 00 44 3b 05 33 d5 12 08 0f 83 e2 00 00 00 4c 89 f0 48 c1 e8 03 <42> 80 3c 28 00 0f 85 91 03 00 00 48 8b 85 10 fe ff ff 48 8b b0 90 RSP: 0018:ffff888095c27980 EFLAGS: 00010206 RAX: 0000000000000012 RBX: ffff888095c27b28 RCX: ffffc90008192000 RDX: 0000000000040000 RSI: ffffffff8340fae7 RDI: 0000000000000007 RBP: ffff888095c27be0 R08: 0000000000000000 R09: ffffed1013f0da33 R10: ffffed1013f0da32 R11: ffff88809f86d197 R12: fffffbfff138b760 R13: dffffc0000000000 R14: 0000000000000090 R15: 0000000000000007 FS: 00007f5027170700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000710158 CR3: 00000000a7b18000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __mem_cgroup_free+0x1a/0x190 mm/memcontrol.c:5021 mem_cgroup_free mm/memcontrol.c:5033 [inline] mem_cgroup_css_alloc+0x3a1/0x1ae0 mm/memcontrol.c:5160 css_create kernel/cgroup/cgroup.c:5156 [inline] cgroup_apply_control_enable+0x44d/0xc40 kernel/cgroup/cgroup.c:3119 cgroup_mkdir+0x899/0x11b0 kernel/cgroup/cgroup.c:5401 kernfs_iop_mkdir+0x14d/0x1d0 fs/kernfs/dir.c:1124 vfs_mkdir+0x42e/0x670 fs/namei.c:3807 do_mkdirat+0x234/0x2a0 fs/namei.c:3830 __do_sys_mkdir fs/namei.c:3846 [inline] __se_sys_mkdir fs/namei.c:3844 [inline] __x64_sys_mkdir+0x5c/0x80 fs/namei.c:3844 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixing this by moving the flush to mem_cgroup_free as there is no need to flush anything if we see failure in mem_cgroup_alloc(). Link: http://lkml.kernel.org/r/[email protected] Fixes: bb65f89 ("mm: memcontrol: flush percpu vmevents before releasing memcg") Fixes: c350a99 ("mm: memcontrol: flush percpu vmstats before releasing memcg") Signed-off-by: Shakeel Butt <[email protected]> Reported-by: [email protected] Reviewed-by: Roman Gushchin <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Vladimir Davydov <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

When the extent tree is modified, it should be protected by inode cluster lock and ip_alloc_sem. The extent tree is accessed and modified in the ocfs2_prepare_inode_for_write, but isn't protected by ip_alloc_sem. The following is a case. The function ocfs2_fiemap is accessing the extent tree, which is modified at the same time. kernel BUG at fs/ocfs2/extent_map.c:475! invalid opcode: 0000 [#1] SMP Modules linked in: tun ocfs2 ocfs2_nodemanager configfs ocfs2_stackglue [...] CPU: 16 PID: 14047 Comm: o2info Not tainted 4.1.12-124.23.1.el6uek.x86_64 #2 Hardware name: Oracle Corporation ORACLE SERVER X7-2L/ASM, MB MECH, X7-2L, BIOS 42040600 10/19/2018 task: ffff88019487e200 ti: ffff88003daa4000 task.ti: ffff88003daa4000 RIP: ocfs2_get_clusters_nocache.isra.11+0x390/0x550 [ocfs2] Call Trace: ocfs2_fiemap+0x1e3/0x430 [ocfs2] do_vfs_ioctl+0x155/0x510 SyS_ioctl+0x81/0xa0 system_call_fastpath+0x18/0xd8 Code: 18 48 c7 c6 60 7f 65 a0 31 c0 bb e2 ff ff ff 48 8b 4a 40 48 8b 7a 28 48 c7 c2 78 2d 66 a0 e8 38 4f 05 00 e9 28 fe ff ff 0f 1f 00 <0f> 0b 66 0f 1f 44 00 00 bb 86 ff ff ff e9 13 fe ff ff 66 0f 1f RIP ocfs2_get_clusters_nocache.isra.11+0x390/0x550 [ocfs2] ---[ end trace c8aa0c8180e869dc ]--- Kernel panic - not syncing: Fatal exception Kernel Offset: disabled This issue can be reproduced every week in a production environment. This issue is related to the usage mode. If others use ocfs2 in this mode, the kernel will panic frequently. [[email protected]: coding style fixes] [Fix new warning due to unused function by removing said function - Linus ] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Shuning Zhang <[email protected]> Reviewed-by: Junxiao Bi <[email protected]> Reviewed-by: Gang He <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Joseph Qi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

Exactly same layout as the default DW5821e module, just a different vid/pid. The QMI interface is exposed in USB configuration #1: P: Vendor=413c ProdID=81e0 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5821e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Aleksander Morgado <[email protected]> Signed-off-by: David S. Miller <[email protected]>

While rebooting the system with SR-IOV vfs enabled leads to below crash due to recurrence of __qede_remove() on the VF devices (first from .shutdown() flow of the VF itself and another from PF's .shutdown() flow executing pci_disable_sriov()) This patch adds a safeguard in __qede_remove() flow to fix this, so that driver doesn't attempt to remove "already removed" devices. [ 194.360134] BUG: unable to handle kernel NULL pointer dereference at 00000000000008dc [ 194.360227] IP: [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.360304] PGD 0 [ 194.360325] Oops: 0000 [#1] SMP [ 194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200 [ 194.361044] qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables] [ 194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1 [ 194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019 [ 194.361412] task: ffff9cea9b360000 ti: ffff9ceabebdc000 task.ti: ffff9ceabebdc000 [ 194.361463] RIP: 0010:[<ffffffffc03553c4>] [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.361534] RSP: 0018:ffff9ceabebdfac0 EFLAGS: 00010282 [ 194.361570] RAX: 0000000000000000 RBX: ffff9cd013846098 RCX: 0000000000000000 [ 194.361621] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9cd013846098 [ 194.361668] RBP: ffff9ceabebdfae8 R08: 0000000000000000 R09: 0000000000000000 [ 194.361715] R10: 00000000bfe14201 R11: ffff9ceabfe141e0 R12: 0000000000000000 [ 194.361762] R13: ffff9cd013846098 R14: 0000000000000000 R15: ffff9ceab5e48000 [ 194.361810] FS: 00007f799c02d880(0000) GS:ffff9ceacb0c0000(0000) knlGS:0000000000000000 [ 194.361865] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 194.361903] CR2: 00000000000008dc CR3: 0000001bdac76000 CR4: 00000000007607e0 [ 194.361953] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 194.362002] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 194.362051] PKRU: 55555554 [ 194.362073] Call Trace: [ 194.362109] [<ffffffffc0355500>] qede_remove+0x10/0x20 [qede] [ 194.362180] [<ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0 [ 194.362240] [<ffffffffb98b3c52>] __device_release_driver+0x82/0xf0 [ 194.362285] [<ffffffffb98b3ce3>] device_release_driver+0x23/0x30 [ 194.362343] [<ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0 [ 194.362388] [<ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20 [ 194.362450] [<ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160 [ 194.362496] [<ffffffffb97f1aec>] sriov_disable+0x3c/0xf0 [ 194.362534] [<ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30 [ 194.362599] [<ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed] [ 194.362658] [<ffffffffb9622df6>] ? kfree+0x106/0x140 [ 194.362709] [<ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed] [ 194.362754] [<ffffffffb9622df6>] ? kfree+0x106/0x140 [ 194.362803] [<ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed] [ 194.362854] [<ffffffffc035544e>] __qede_remove+0xae/0x130 [qede] [ 194.362904] [<ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede] [ 194.362956] [<ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60 [ 194.363010] [<ffffffffb98b180b>] device_shutdown+0xfb/0x1f0 [ 194.363066] [<ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40 [ 194.363107] [<ffffffffb94b66e2>] kernel_restart+0x12/0x60 [ 194.363146] [<ffffffffb94b6959>] SYSC_reboot+0x229/0x260 [ 194.363196] [<ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0 [ 194.363253] [<ffffffffb942b621>] ? __switch_to+0x151/0x580 [ 194.363304] [<ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0 [ 194.363343] [<ffffffffb94b69fe>] SyS_reboot+0xe/0x10 [ 194.363387] [<ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a [ 194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0 [ 194.363712] RIP [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.363764] RSP <ffff9ceabebdfac0> [ 194.363791] CR2: 00000000000008dc Signed-off-by: Manish Chopra <[email protected]> Signed-off-by: Ariel Elior <[email protected]> Signed-off-by: Sudarsana Kalluru <[email protected]> Signed-off-by: David S. Miller <[email protected]>

Signed-off-by: Daniel Baluta <[email protected]>

The index r_tid_ack is used to indicate the next TID RDMA WRITE request to acknowledge in the ring s_ack_queue[] on the responder side and should be set to a valid index other than its initial value before r_tid_tail is advanced to the next TID RDMA WRITE request and particularly before a TID RDMA ACK is built. Otherwise, a NULL pointer dereference may result: BUG: unable to handle kernel paging request at ffff9a32d27abff8 IP: [<ffffffffc0d87ea6>] hfi1_make_tid_rdma_pkt+0x476/0xcb0 [hfi1] PGD 2749032067 PUD 0 Oops: 0000 1 SMP Modules linked in: osp(OE) ofd(OE) lfsck(OE) ost(OE) mgc(OE) osd_zfs(OE) lquota(OE) lustre(OE) lmv(OE) mdc(OE) lov(OE) fid(OE) fld(OE) ko2iblnd(OE) ptlrpc(OE) obdclass(OE) lnet(OE) libcfs(OE) ib_ipoib(OE) hfi1(OE) rdmavt(OE) nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache ib_isert iscsi_target_mod target_core_mod ib_ucm dm_mirror dm_region_hash dm_log mlx5_ib dm_mod zfs(POE) rpcrdma sunrpc rdma_ucm ib_uverbs opa_vnic ib_iser zunicode(POE) ib_umad zavl(POE) icp(POE) sb_edac intel_powerclamp coretemp rdma_cm intel_rapl iosf_mbi iw_cm libiscsi scsi_transport_iscsi kvm ib_cm iTCO_wdt mxm_wmi iTCO_vendor_support irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd zcommon(POE) znvpair(POE) pcspkr spl(OE) mei_me sg mei ioatdma lpc_ich joydev i2c_i801 shpchp ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 mlx5_core drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ixgbe ahci ttm mlxfw ib_core libahci devlink mdio crct10dif_pclmul crct10dif_common drm ptp libata megaraid_sas crc32c_intel i2c_algo_bit pps_core i2c_core dca [last unloaded: rdmavt] CPU: 15 PID: 68691 Comm: kworker/15:2H Kdump: loaded Tainted: P W OE ------------ 3.10.0-862.2.3.el7_lustre.x86_64 #1 Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS SE5C610.86B.01.01.0016.033120161139 03/31/2016 Workqueue: hfi0_0 _hfi1_do_tid_send [hfi1] task: ffff9a01f47faf70 ti: ffff9a11776a8000 task.ti: ffff9a11776a8000 RIP: 0010:[<ffffffffc0d87ea6>] [<ffffffffc0d87ea6>] hfi1_make_tid_rdma_pkt+0x476/0xcb0 [hfi1] RSP: 0018:ffff9a11776abd08 EFLAGS: 00010002 RAX: ffff9a32d27abfc0 RBX: ffff99f2d27aa000 RCX: 00000000ffffffff RDX: 0000000000000000 RSI: 0000000000000220 RDI: ffff99f2ffc05300 RBP: ffff9a11776abd88 R08: 000000000001c310 R09: ffffffffc0d87ad4 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9a117a423c00 R13: ffff9a117a423c00 R14: ffff9a03500c0000 R15: ffff9a117a423cb8 FS: 0000000000000000(0000) GS:ffff9a117e9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9a32d27abff8 CR3: 0000002748a0e000 CR4: 00000000001607e0 Call Trace: [<ffffffffc0d88874>] _hfi1_do_tid_send+0x194/0x320 [hfi1] [<ffffffffaf0b2dff>] process_one_work+0x17f/0x440 [<ffffffffaf0b3ac6>] worker_thread+0x126/0x3c0 [<ffffffffaf0b39a0>] ? manage_workers.isra.24+0x2a0/0x2a0 [<ffffffffaf0bae31>] kthread+0xd1/0xe0 [<ffffffffaf0bad60>] ? insert_kthread_work+0x40/0x40 [<ffffffffaf71f5f7>] ret_from_fork_nospec_begin+0x21/0x21 [<ffffffffaf0bad60>] ? insert_kthread_work+0x40/0x40 hfi1 0000:05:00.0: hfi1_0: reserved_op: opcode 0xf2, slot 2, rsv_used 1, rsv_ops 1 Code: 00 00 41 8b 8d d8 02 00 00 89 c8 48 89 45 b0 48 c1 65 b0 06 48 8b 83 a0 01 00 00 48 01 45 b0 48 8b 45 b0 41 80 bd 10 03 00 00 00 <48> 8b 50 38 4c 8d 7a 50 74 45 8b b2 d0 00 00 00 85 f6 0f 85 72 RIP [<ffffffffc0d87ea6>] hfi1_make_tid_rdma_pkt+0x476/0xcb0 [hfi1] RSP <ffff9a11776abd08> CR2: ffff9a32d27abff8 This problem can happen if a RESYNC request is received before r_tid_ack is modified. This patch fixes the issue by making sure that r_tid_ack is set to a valid value before a TID RDMA ACK is built. Functions are defined to simplify the code. Fixes: 07b9237 ("IB/hfi1: Add functions to receive TID RDMA WRITE request") Fixes: 7cf0ad6 ("IB/hfi1: Add a function to receive TID RDMA RESYNC packet") Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Reviewed-by: Mike Marciniszyn <[email protected]> Reviewed-by: Dennis Dalessandro <[email protected]> Signed-off-by: Kaike Wan <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>

Reported by syzkaller: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 14727 Comm: syz-executor.3 Not tainted 5.4.0-rc4+ #0 RIP: 0010:kvm_coalesced_mmio_init+0x5d/0x110 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:121 Call Trace: kvm_dev_ioctl_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:3446 [inline] kvm_dev_ioctl+0x781/0x1490 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3494 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0x196/0x1150 fs/ioctl.c:696 ksys_ioctl+0x62/0x90 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x6e/0xb0 fs/ioctl.c:718 do_syscall_64+0xca/0x5d0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Commit 9121923 ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm") moves memslots and buses allocations around, however, if kvm->srcu/irq_srcu fails initialization, NULL will be returned instead of error code, NULL will not be intercepted in kvm_dev_ioctl_create_vm() and be dereferenced by kvm_coalesced_mmio_init(), this patch fixes it. Moving the initialization is required anyway to avoid an incorrect synchronize_srcu that was also reported by syzkaller: wait_for_completion+0x29c/0x440 kernel/sched/completion.c:136 __synchronize_srcu+0x197/0x250 kernel/rcu/srcutree.c:921 synchronize_srcu_expedited kernel/rcu/srcutree.c:946 [inline] synchronize_srcu+0x239/0x3e8 kernel/rcu/srcutree.c:997 kvm_page_track_unregister_notifier+0xe7/0x130 arch/x86/kvm/page_track.c:212 kvm_mmu_uninit_vm+0x1e/0x30 arch/x86/kvm/mmu.c:5828 kvm_arch_destroy_vm+0x4a2/0x5f0 arch/x86/kvm/x86.c:9579 kvm_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:702 [inline] so do it. Reported-by: [email protected] Reported-by: [email protected] Fixes: 9121923 ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm") Cc: Jim Mattson <[email protected]> Cc: Wanpeng Li <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>

During rename exchange we might have successfully log the new name in the source root's log tree, in which case we leave our log context (allocated on stack) in the root's list of log contextes. However we might fail to log the new name in the destination root, in which case we fallback to a transaction commit later and never sync the log of the source root, which causes the source root log context to remain in the list of log contextes. This later causes invalid memory accesses because the context was allocated on stack and after rename exchange finishes the stack gets reused and overwritten for other purposes. The kernel's linked list corruption detector (CONFIG_DEBUG_LIST=y) can detect this and report something like the following: [ 691.489929] ------------[ cut here ]------------ [ 691.489947] list_add corruption. prev->next should be next (ffff88819c944530), but was ffff8881c23f7be4. (prev=ffff8881c23f7a38). [ 691.489967] WARNING: CPU: 2 PID: 28933 at lib/list_debug.c:28 __list_add_valid+0x95/0xe0 (...) [ 691.489998] CPU: 2 PID: 28933 Comm: fsstress Not tainted 5.4.0-rc6-btrfs-next-62 #1 [ 691.490001] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 [ 691.490003] RIP: 0010:__list_add_valid+0x95/0xe0 (...) [ 691.490007] RSP: 0018:ffff8881f0b3faf8 EFLAGS: 00010282 [ 691.490010] RAX: 0000000000000000 RBX: ffff88819c944530 RCX: 0000000000000000 [ 691.490011] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffffa2c497e0 [ 691.490013] RBP: ffff8881f0b3fe68 R08: ffffed103eaa4115 R09: ffffed103eaa4114 [ 691.490015] R10: ffff88819c944000 R11: ffffed103eaa4115 R12: 7fffffffffffffff [ 691.490016] R13: ffff8881b4035610 R14: ffff8881e7b84728 R15: 1ffff1103e167f7b [ 691.490019] FS: 00007f4b25ea2e80(0000) GS:ffff8881f5500000(0000) knlGS:0000000000000000 [ 691.490021] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 691.490022] CR2: 00007fffbb2d4eec CR3: 00000001f2a4a004 CR4: 00000000003606e0 [ 691.490025] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 691.490027] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 691.490029] Call Trace: [ 691.490058] btrfs_log_inode_parent+0x667/0x2730 [btrfs] [ 691.490083] ? join_transaction+0x24a/0xce0 [btrfs] [ 691.490107] ? btrfs_end_log_trans+0x80/0x80 [btrfs] [ 691.490111] ? dget_parent+0xb8/0x460 [ 691.490116] ? lock_downgrade+0x6b0/0x6b0 [ 691.490121] ? rwlock_bug.part.0+0x90/0x90 [ 691.490127] ? do_raw_spin_unlock+0x142/0x220 [ 691.490151] btrfs_log_dentry_safe+0x65/0x90 [btrfs] [ 691.490172] btrfs_sync_file+0x9f1/0xc00 [btrfs] [ 691.490195] ? btrfs_file_write_iter+0x1800/0x1800 [btrfs] [ 691.490198] ? rcu_read_lock_any_held.part.11+0x20/0x20 [ 691.490204] ? __do_sys_newstat+0x88/0xd0 [ 691.490207] ? cp_new_stat+0x5d0/0x5d0 [ 691.490218] ? do_fsync+0x38/0x60 [ 691.490220] do_fsync+0x38/0x60 [ 691.490224] __x64_sys_fdatasync+0x32/0x40 [ 691.490228] do_syscall_64+0x9f/0x540 [ 691.490233] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 691.490235] RIP: 0033:0x7f4b253ad5f0 (...) [ 691.490239] RSP: 002b:00007fffbb2d6078 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 691.490242] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f4b253ad5f0 [ 691.490244] RDX: 00007fffbb2d5fe0 RSI: 00007fffbb2d5fe0 RDI: 0000000000000003 [ 691.490245] RBP: 000000000000000d R08: 0000000000000001 R09: 00007fffbb2d608c [ 691.490247] R10: 00000000000002e8 R11: 0000000000000246 R12: 00000000000001f4 [ 691.490248] R13: 0000000051eb851f R14: 00007fffbb2d6120 R15: 00005635a498bda0 This started happening recently when running some test cases from fstests like btrfs/004 for example, because support for rename exchange was added last week to fsstress from fstests. So fix this by deleting the log context for the source root from the list if we have logged the new name in the source root. Reported-by: Su Yue <[email protected]> Fixes: d4682ba ("Btrfs: sync log after logging new name") CC: [email protected] # 4.19+ Tested-by: Su Yue <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>

On some systems, some variant of the following splat is repeatedly seen. The common factor in all traces seems to be the entry point to task_file_seq_next(). With the patch, all warnings go away. rcu: INFO: rcu_sched self-detected stall on CPU rcu: \x0926-....: (20992 ticks this GP) idle=d7e/1/0x4000000000000002 softirq=81556231/81556231 fqs=4876 \x09(t=21033 jiffies g=159148529 q=223125) NMI backtrace for cpu 26 CPU: 26 PID: 2015853 Comm: bpftool Kdump: loaded Not tainted 5.6.13-0_fbk4_3876_gd8d1f9bf80bb #1 Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A12 10/08/2018 Call Trace: <IRQ> dump_stack+0x50/0x70 nmi_cpu_backtrace.cold.6+0x13/0x50 ? lapic_can_unplug_cpu.cold.30+0x40/0x40 nmi_trigger_cpumask_backtrace+0xba/0xca rcu_dump_cpu_stacks+0x99/0xc7 rcu_sched_clock_irq.cold.90+0x1b4/0x3aa ? tick_sched_do_timer+0x60/0x60 update_process_times+0x24/0x50 tick_sched_timer+0x37/0x70 __hrtimer_run_queues+0xfe/0x270 hrtimer_interrupt+0xf4/0x210 smp_apic_timer_interrupt+0x5e/0x120 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:get_pid_task+0x38/0x80 Code: 89 f6 48 8d 44 f7 08 48 8b 00 48 85 c0 74 2b 48 83 c6 55 48 c1 e6 04 48 29 f0 74 19 48 8d 78 20 ba 01 00 00 00 f0 0f c1 50 20 <85> d2 74 27 78 11 83 c2 01 78 0c 48 83 c4 08 c3 31 c0 48 83 c4 08 RSP: 0018:ffffc9000d293dc8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13 RAX: ffff888637c05600 RBX: ffffc9000d293e0c RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000550 RDI: ffff888637c05620 RBP: ffffffff8284eb80 R08: ffff88831341d300 R09: ffff88822ffd8248 R10: ffff88822ffd82d0 R11: 00000000003a93c0 R12: 0000000000000001 R13: 00000000ffffffff R14: ffff88831341d300 R15: 0000000000000000 ? find_ge_pid+0x1b/0x20 task_seq_get_next+0x52/0xc0 task_file_seq_get_next+0x159/0x220 task_file_seq_next+0x4f/0xa0 bpf_seq_read+0x159/0x390 vfs_read+0x8a/0x140 ksys_read+0x59/0xd0 do_syscall_64+0x42/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f95ae73e76e Code: Bad RIP value. RSP: 002b:00007ffc02c1dbf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 000000000170faa0 RCX: 00007f95ae73e76e RDX: 0000000000001000 RSI: 00007ffc02c1dc30 RDI: 0000000000000007 RBP: 00007ffc02c1ec70 R08: 0000000000000005 R09: 0000000000000006 R10: fffffffffffff20b R11: 0000000000000246 R12: 00000000019112a0 R13: 0000000000000000 R14: 0000000000000007 R15: 00000000004283c0 If unable to obtain the file structure for the current task, proceed to the next task number after the one returned from task_seq_get_next(), instead of the next task number from the original iterator. Also, save the stopping task number from task_seq_get_next() on failure in case of restarts. Fixes: eaaacd2 ("bpf: Add task and task/file iterator targets") Signed-off-by: Jonathan Lemon <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]

… set The commit 0472bf0 ("xhci: Prevent U1/U2 link pm states if exit latency is too long") was constraining the xhci code not to allow U1/U2 sleep states if the latency to wake up from the U-states reached the service interval of an periodic endpoint. This fix was not taking into account that in case the quirk XHCI_INTEL_HOST is set, the wakeup time will be calculated and configured differently. It checks for u1_params.mel/u2_params.mel as a limit. But the code could decide to write another MEL into the hardware. This leads to broken cases where not enough bandwidth is available for other devices: usb 1-2: can't set config #1, error -28 This patch is fixing that case by checking for timeout_ns after the wakeup time was calculated depending on the quirks. Fixes: 0472bf0 ("xhci: Prevent U1/U2 link pm states if exit latency is too long") Signed-off-by: Michael Grzeschik <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

The crash was caused by locking an uninitialized lock during init of drm_gem_object. The lock changed in the breaking commit, but the init was not moved accordingly. 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = (ptrval) [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: msm(+) qcom_spmi_vadc qcom_vadc_common dm_mod usb_f_rndis rmi_i2c rmi_core qnoc_msm8974 icc_smd_rpm pm8941_pwrkey CPU: 2 PID: 1020 Comm: udevd Not tainted 5.10.0-postmarketos-qcom-msm8974 linux-kernel-labs#8 Hardware name: Generic DT based system PC is at ww_mutex_lock+0x20/0xb0 LR is at _msm_gem_new+0x13c/0x298 [msm] pc : [<c0be31e8>] lr : [<bf0b3404>] psr: 20000013 sp : c36e7ad0 ip : c3b3d800 fp : 00000000 r10: 00000001 r9 : c3b22800 r8 : 00000000 r7 : c3b23000 r6 : c3b3d60 r5 : c3b3d60 r4 : 00000000 r3 : c34b4780 r2 : c3b3d6f4 r1 : 00000000 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5787d Table: 03ae406a DAC: 00000051 Process udevd (pid: 1020, stack limit = 0x(ptrval)) Stack: (0xc36e7ad0 to 0xc36e8000) [...] [<c0be31e8>] (ww_mutex_lock) from [<bf0b3404>] (_msm_gem_new+0x13c/0x298 [msm]) [<bf0b3404>] (_msm_gem_new [msm]) from [<bf0b3aa8>] (_msm_gem_kernel_new+0x20/0x190 [msm]) [<bf0b3aa8>] (_msm_gem_kernel_new [msm]) from [<bf0b4a30>] (msm_gem_kernel_new+0x24/0x2c [msm]) [<bf0b4a30>] (msm_gem_kernel_new [msm]) from [<bf0b8e2c>] (msm_gpu_init+0x308/0x548 [msm]) [<bf0b8e2c>] (msm_gpu_init [msm]) from [<bf060a90>] (adreno_gpu_init+0x13c/0x240 [msm]) [<bf060a90>] (adreno_gpu_init [msm]) from [<bf062b1c>] (a3xx_gpu_init+0x78/0x1dc [msm]) [<bf062b1c>] (a3xx_gpu_init [msm]) from [<bf05f394>] (adreno_bind+0x1cc/0x274 [msm]) [<bf05f394>] (adreno_bind [msm]) from [<c087a254>] (component_bind_all+0x11c/0x278) [<c087a254>] (component_bind_all) from [<bf0b11d4>] (msm_drm_bind+0x18c/0x5b4 [msm]) [<bf0b11d4>] (msm_drm_bind [msm]) from [<c0879ea0>] (try_to_bring_up_master+0x200/0x2c8) [<c0879ea0>] (try_to_bring_up_master) from [<c087a648>] (component_master_add_with_match+0xc8/0xfc) [<c087a648>] (component_master_add_with_match) from [<bf0b0c3c>] (msm_pdev_probe+0x288/0x2c4 [msm]) [<bf0b0c3c>] (msm_pdev_probe [msm]) from [<c08844cc>] (platform_drv_probe+0x48/0x98) [<c08844cc>] (platform_drv_probe) from [<c0881cc4>] (really_probe+0x108/0x528) [<c0881cc4>] (really_probe) from [<c0882480>] (driver_probe_device+0x78/0x1d4) [<c0882480>] (driver_probe_device) from [<c08828dc>] (device_driver_attach+0xa8/0xb0) [<c08828dc>] (device_driver_attach) from [<c0882998>] (__driver_attach+0xb4/0x154) [<c0882998>] (__driver_attach) from [<c087fa1c>] (bus_for_each_dev+0x78/0xb8) [<c087fa1c>] (bus_for_each_dev) from [<c0880e98>] (bus_add_driver+0x10c/0x208) [<c0880e98>] (bus_add_driver) from [<c0883504>] (driver_register+0x88/0x118) [<c0883504>] (driver_register) from [<c0302098>] (do_one_initcall+0x50/0x2b0) [<c0302098>] (do_one_initcall) from [<c03bace4>] (do_init_module+0x60/0x288) [<c03bace4>] (do_init_module) from [<c03bdf1c>] (sys_finit_module+0xd4/0x120) [<c03bdf1c>] (sys_finit_module) from [<c0300060>] (ret_fast_syscall+0x0/0x54) Exception stack(0xc36e7fa8 to 0xc36e7ff0) 7fa0: 00020000 00000000 00000007 b6edd5b0 00000000 b6f2ff20 7fc0: 00020000 00000000 0000017b 0000017b b6eef980 bedc3a54 00473c99 00000000 7fe0: b6edd5b0 bedc3918 b6ed8a5f b6f6a8b0 Code: e3c3303f e593300c e1a04000 f590f000 (e1940f9f) ---[ end trace 277e2a3da40bbb76 ]--- Fixes: 6c0e3ea ("drm/msm/gem: Switch over to obj->resv for locking") Signed-off-by: Iskren Chernev <[email protected]> Signed-off-by: Rob Clark <[email protected]>

When binding the ConfigFS gadget to a UDC, the functions in each configuration are added in list order. However, if usb_add_function() fails, the failed function is put back on its configuration's func_list and purge_configs_funcs() is called to further clean up. purge_configs_funcs() iterates over the configurations and functions in forward order, calling unbind() on each of the previously added functions. But after doing so, each function gets moved to the tail of the configuration's func_list. This results in reshuffling the original order of the functions within a configuration such that the failed function now appears first even though it may have originally appeared in the middle or even end of the list. At this point if the ConfigFS gadget is attempted to re-bind to the UDC, the functions will be added in a different order than intended, with the only recourse being to remove and relink the functions all over again. An example of this as follows: ln -s functions/mass_storage.0 configs/c.1 ln -s functions/ncm.0 configs/c.1 ln -s functions/ffs.adb configs/c.1 # oops, forgot to start adbd echo "<udc device>" > UDC # fails start adbd echo "<udc device>" > UDC # now succeeds, but... # bind order is # "ADB", mass_storage, ncm [30133.118289] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520 [30133.119875] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520 [30133.119974] using random self ethernet address [30133.120002] using random host ethernet address [30133.139604] usb0: HOST MAC 3e:27:46:ba:3e:26 [30133.140015] usb0: MAC 6e:28:7e:42:66:6a [30133.140062] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520 [30133.140081] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 --> -19 [30133.140098] configfs-gadget gadget: unbind function 'Mass Storage Function'/ffffff810af87200 [30133.140119] configfs-gadget gadget: unbind function 'cdc_network'/ffffff80f48d1a00 [30133.173201] configfs-gadget a600000.dwc3: failed to start g1: -19 [30136.661933] init: starting service 'adbd'... [30136.700126] read descriptors [30136.700413] read strings [30138.574484] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520 [30138.575497] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520 [30138.575554] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520 [30138.575631] using random self ethernet address [30138.575660] using random host ethernet address [30138.595338] usb0: HOST MAC 2e:cf:43:cd:ca:c8 [30138.597160] usb0: MAC 6a:f0:9f:ee:82:a0 [30138.791490] configfs-gadget gadget: super-speed config #1: c Fix this by reversing the iteration order of the functions in purge_config_funcs() when unbinding them, and adding them back to the config's func_list at the head instead of the tail. This ensures that we unbind and unwind back to the original list order. Fixes: 88af8bb ("usb: gadget: the start of the configfs interface") Signed-off-by: Chandana Kishori Chiluveru <[email protected]> Signed-off-by: Jack Pham <[email protected]> Reviewed-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Like other tunneling interfaces, the bareudp doesn't need TXLOCK. So, It is good to set the NETIF_F_LLTX flag to improve performance and to avoid lockdep's false-positive warning. Test commands: ip netns add A ip netns add B ip link add veth0 netns A type veth peer name veth1 netns B ip netns exec A ip link set veth0 up ip netns exec A ip a a 10.0.0.1/24 dev veth0 ip netns exec B ip link set veth1 up ip netns exec B ip a a 10.0.0.2/24 dev veth1 for i in {2..1} do let A=$i-1 ip netns exec A ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec A ip link set bareudp$i up ip netns exec A ip a a 10.0.$i.1/24 dev bareudp$i ip netns exec A ip r a 10.0.$i.2 encap ip src 10.0.$A.1 \ dst 10.0.$A.2 via 10.0.$i.2 dev bareudp$i ip netns exec B ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec B ip link set bareudp$i up ip netns exec B ip a a 10.0.$i.2/24 dev bareudp$i ip netns exec B ip r a 10.0.$i.1 encap ip src 10.0.$A.2 \ dst 10.0.$A.1 via 10.0.$i.1 dev bareudp$i done ip netns exec A ping 10.0.2.2 Splat looks like: [ 96.992803][ T822] ============================================ [ 96.993954][ T822] WARNING: possible recursive locking detected [ 96.995102][ T822] 5.10.0+ torvalds#819 Not tainted [ 96.995927][ T822] -------------------------------------------- [ 96.997091][ T822] ping/822 is trying to acquire lock: [ 96.998083][ T822] ffff88810f753898 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 96.999813][ T822] [ 96.999813][ T822] but task is already holding lock: [ 97.001192][ T822] ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.002908][ T822] [ 97.002908][ T822] other info that might help us debug this: [ 97.004401][ T822] Possible unsafe locking scenario: [ 97.004401][ T822] [ 97.005784][ T822] CPU0 [ 97.006407][ T822] ---- [ 97.007010][ T822] lock(_xmit_NONE#2); [ 97.007779][ T822] lock(_xmit_NONE#2); [ 97.008550][ T822] [ 97.008550][ T822] *** DEADLOCK *** [ 97.008550][ T822] [ 97.010057][ T822] May be due to missing lock nesting notation [ 97.010057][ T822] [ 97.011594][ T822] 7 locks held by ping/822: [ 97.012426][ T822] #0: ffff888109a144f0 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x12f7/0x2b00 [ 97.014191][ T822] #1: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.016045][ T822] #2: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.017897][ T822] #3: ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.019684][ T822] #4: ffffffffbce2f600 (rcu_read_lock){....}-{1:2}, at: bareudp_xmit+0x31b/0x3690 [bareudp] [ 97.021573][ T822] #5: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.023424][ T822] #6: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.025259][ T822] [ 97.025259][ T822] stack backtrace: [ 97.026349][ T822] CPU: 3 PID: 822 Comm: ping Not tainted 5.10.0+ torvalds#819 [ 97.027609][ T822] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 97.029407][ T822] Call Trace: [ 97.030015][ T822] dump_stack+0x99/0xcb [ 97.030783][ T822] __lock_acquire.cold.77+0x149/0x3a9 [ 97.031773][ T822] ? stack_trace_save+0x81/0xa0 [ 97.032661][ T822] ? register_lock_class+0x1910/0x1910 [ 97.033673][ T822] ? register_lock_class+0x1910/0x1910 [ 97.034679][ T822] ? rcu_read_lock_sched_held+0x91/0xc0 [ 97.035697][ T822] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 97.036690][ T822] lock_acquire+0x1b2/0x730 [ 97.037515][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.038466][ T822] ? check_flags+0x50/0x50 [ 97.039277][ T822] ? netif_skb_features+0x296/0x9c0 [ 97.040226][ T822] ? validate_xmit_skb+0x29/0xb10 [ 97.041151][ T822] _raw_spin_lock+0x30/0x70 [ 97.041977][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.042927][ T822] __dev_queue_xmit+0x1f52/0x2960 [ 97.043852][ T822] ? netdev_core_pick_tx+0x290/0x290 [ 97.044824][ T822] ? mark_held_locks+0xb7/0x120 [ 97.045712][ T822] ? lockdep_hardirqs_on_prepare+0x12c/0x3e0 [ 97.046824][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.047771][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.048710][ T822] ? trace_hardirqs_on+0x41/0x120 [ 97.049626][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.050556][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.051509][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.052443][ T822] ? check_chain_key+0x244/0x5f0 [ 97.053352][ T822] ? rcu_read_lock_bh_held+0x56/0xa0 [ 97.054317][ T822] ? ip_finish_output2+0x6ea/0x2020 [ 97.055263][ T822] ? pneigh_lookup+0x410/0x410 [ 97.056135][ T822] ip_finish_output2+0x6ea/0x2020 [ ... ] Acked-by: Guillaume Nault <[email protected]> Fixes: 571912c ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Taehee Yoo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

In the bareudp6_xmit_skb(), it calculates min_headroom. At that point, it uses struct iphdr, but it's not correct. So panic could occur. The struct ipv6hdr should be used. Test commands: ip netns add A ip netns add B ip link add veth0 netns A type veth peer name veth1 netns B ip netns exec A ip link set veth0 up ip netns exec A ip a a 2001:db8:0::1/64 dev veth0 ip netns exec B ip link set veth1 up ip netns exec B ip a a 2001:db8:0::2/64 dev veth1 for i in {10..1} do let A=$i-1 ip netns exec A ip link add bareudp$i type bareudp dstport $i \ ethertype 0x86dd ip netns exec A ip link set bareudp$i up ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev bareudp$i ip netns exec A ip -6 r a 2001:db8:$i::2 encap ip6 src \ 2001:db8:$A::1 dst 2001:db8:$A::2 via 2001:db8:$i::2 \ dev bareudp$i ip netns exec B ip link add bareudp$i type bareudp dstport $i \ ethertype 0x86dd ip netns exec B ip link set bareudp$i up ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev bareudp$i ip netns exec B ip -6 r a 2001:db8:$i::1 encap ip6 src \ 2001:db8:$A::2 dst 2001:db8:$A::1 via 2001:db8:$i::1 \ dev bareudp$i done ip netns exec A ping 2001:db8:7::2 Splat looks like: [ 66.436679][ C2] skbuff: skb_under_panic: text:ffffffff928614c8 len:454 put:14 head:ffff88810abb4000 data:ffff88810abb3ffa tail:0x1c0 end:0x3ec0 dev:veth0 [ 66.441626][ C2] ------------[ cut here ]------------ [ 66.443458][ C2] kernel BUG at net/core/skbuff.c:109! [ 66.445313][ C2] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 66.447606][ C2] CPU: 2 PID: 913 Comm: ping Not tainted 5.10.0+ torvalds#819 [ 66.450251][ C2] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 66.453713][ C2] RIP: 0010:skb_panic+0x15d/0x15f [ 66.455345][ C2] Code: 98 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 60 8b 78 93 41 57 41 56 41 55 48 8b 54 24 20 48 8b 74 24 28 e8 b5 40 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 08 c9 98 fe 8b 34 24 48 c7 c1 80 [ 66.462314][ C2] RSP: 0018:ffff888119209648 EFLAGS: 00010286 [ 66.464281][ C2] RAX: 0000000000000089 RBX: ffff888003159000 RCX: 0000000000000000 [ 66.467216][ C2] RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed10232412c0 [ 66.469768][ C2] RBP: ffff88810a53d440 R08: ffffed102328018d R09: ffffed102328018d [ 66.472297][ C2] R10: ffff888119400c67 R11: ffffed102328018c R12: 000000000000000e [ 66.474833][ C2] R13: ffff88810abb3ffa R14: 00000000000001c0 R15: 0000000000003ec0 [ 66.477361][ C2] FS: 00007f37c0c72f00(0000) GS:ffff888119200000(0000) knlGS:0000000000000000 [ 66.480214][ C2] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 66.482296][ C2] CR2: 000055a058808570 CR3: 000000011039e002 CR4: 00000000003706e0 [ 66.484811][ C2] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 66.487793][ C2] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 66.490424][ C2] Call Trace: [ 66.491469][ C2] <IRQ> [ 66.492374][ C2] ? eth_header+0x28/0x190 [ 66.494054][ C2] ? eth_header+0x28/0x190 [ 66.495401][ C2] skb_push.cold.99+0x22/0x22 [ 66.496700][ C2] eth_header+0x28/0x190 [ 66.497867][ C2] neigh_resolve_output+0x3de/0x720 [ 66.499615][ C2] ? __neigh_update+0x7e8/0x20a0 [ 66.501176][ C2] __neigh_update+0x8bd/0x20a0 [ 66.502749][ C2] ndisc_update+0x34/0xc0 [ 66.504010][ C2] ndisc_recv_na+0x8da/0xb80 [ 66.505041][ C2] ? pndisc_redo+0x20/0x20 [ 66.505888][ C2] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 66.506965][ C2] ndisc_rcv+0x3a0/0x470 [ 66.507797][ C2] icmpv6_rcv+0xad9/0x1b00 [ 66.508645][ C2] ip6_protocol_deliver_rcu+0xcd6/0x1560 [ 66.509719][ C2] ip6_input_finish+0x5b/0xf0 [ 66.510615][ C2] ip6_input+0xcd/0x2d0 [ 66.511406][ C2] ? ip6_input_finish+0xf0/0xf0 [ 66.512327][ C2] ? rcu_read_lock_held+0x91/0xa0 [ 66.513279][ C2] ? ip6_protocol_deliver_rcu+0x1560/0x1560 [ 66.514414][ C2] ipv6_rcv+0xe8/0x300 [ ... ] Acked-by: Guillaume Nault <[email protected]> Fixes: 571912c ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Taehee Yoo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

…issue fix NULL pointer issue when read sysfs amdgpu_current_backlight_pwm sysfs node. Call Trace: [ 248.273833] BUG: kernel NULL pointer dereference, address: 0000000000000130 [ 248.273930] #PF: supervisor read access in kernel mode [ 248.273993] #PF: error_code(0x0000) - not-present page [ 248.274054] PGD 0 P4D 0 [ 248.274092] Oops: 0000 [#1] SMP PTI [ 248.274138] CPU: 2 PID: 1377 Comm: cat Tainted: G OE 5.9.0-rc5-drm-next-5.9+ #1 [ 248.274233] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 3802 03/15/2018 [ 248.274641] RIP: 0010:dc_link_get_backlight_level+0x5/0x70 [amdgpu] [ 248.274718] Code: 67 ff ff ff 41 b9 03 00 00 00 e9 45 ff ff ff d1 ea e9 55 ff ff ff 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <48> 8b 87 30 01 00 00 48 8b 00 48 8b 88 88 03 00 00 48 8d 81 e8 01 [ 248.274919] RSP: 0018:ffffb5ad809b3df0 EFLAGS: 00010203 [ 248.274982] RAX: ffffa0f77d1c0010 RBX: ffffa0f793ae9168 RCX: 0000000000000001 [ 248.275064] RDX: ffffa0f79753db00 RSI: 0000000000000001 RDI: 0000000000000000 [ 248.275145] RBP: ffffb5ad809b3e00 R08: ffffb5ad809b3da0 R09: 0000000000000000 [ 248.275225] R10: ffffb5ad809b3e68 R11: 0000000000000000 R12: ffffa0f793ae9190 [ 248.275306] R13: ffffb5ad809b3ef0 R14: 0000000000000001 R15: ffffa0f793ae9168 [ 248.275388] FS: 00007f5f1ec4d540(0000) GS:ffffa0f79ec80000(0000) knlGS:0000000000000000 [ 248.275480] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 248.275547] CR2: 0000000000000130 CR3: 000000042a03c005 CR4: 00000000003706e0 [ 248.275628] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 248.275708] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 248.275789] Call Trace: [ 248.276124] ? current_backlight_read+0x24/0x40 [amdgpu] [ 248.276194] seq_read+0xc3/0x3f0 [ 248.276240] full_proxy_read+0x5c/0x90 [ 248.276290] vfs_read+0xa7/0x190 [ 248.276334] ksys_read+0xa7/0xe0 [ 248.276379] __x64_sys_read+0x1a/0x20 [ 248.276429] do_syscall_64+0x37/0x80 [ 248.276477] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 248.276538] RIP: 0033:0x7f5f1e75c191 [ 248.276585] Code: fe ff ff 48 8d 3d b7 9d 0a 00 48 83 ec 08 e8 46 4d 02 00 66 0f 1f 44 00 00 48 8d 05 71 07 2e 00 8b 00 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53Hw [ 248.276784] RSP: 002b:00007ffcb1fc3f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 248.276872] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5f1e75c191 [ 248.276953] RDX: 0000000000020000 RSI: 00007f5f1ec2b000 RDI: 0000000000000003 [ 248.277034] RBP: 0000000000020000 R08: 00000000ffffffff R09: 0000000000000000 [ 248.277115] R10: 0000000000000022 R11: 0000000000000246 R12: 00007f5f1ec2b000 [ 248.277195] R13: 0000000000000003 R14: 00007f5f1ec2b00f R15: 0000000000020000 [ 248.277279] Modules linked in: amdgpu(OE) iommu_v2 gpu_sched ttm(OE) drm_kms_helper cec drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio intel_rapl_msr intel_rapl_common snd_hda_intel snd_intel_dspcfg x86_pkg_temp_thermal intel_powerclamp snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event mei_hdcp coretemp snd_rawmidi snd_seq kvm_intel kvm snd_seq_device snd_timer irqbypass joydev snd input_leds soundcore crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper rapl intel_cstate mac_hid mei_me serio_raw mei eeepc_wmi wmi_bmof asus_wmi mxm_wmi intel_wmi_thunderbolt acpi_pad sparse_keymap efi_pstore sch_fq_codel parport_pc ppdev lp parport sunrpc ip_tables x_tables autofs4 hid_logitech_hidpp hid_logitech_dj hid_generic usbhid hid e1000e psmouse ahci libahci wmi video [ 248.278211] CR2: 0000000000000130 [ 248.278221] ---[ end trace 1fbe72fe6f91091d ]--- [ 248.357226] RIP: 0010:dc_link_get_backlight_level+0x5/0x70 [amdgpu] [ 248.357272] Code: 67 ff ff ff 41 b9 03 00 00 00 e9 45 ff ff ff d1 ea e9 55 ff ff ff 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <48> 8b 87 30 01 00 00 48 8b 00 48 8b 88 88 03 00 00 48 8d 81 e8 01 Signed-off-by: Kevin Wang <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>

ASD and TA share the same firmware in SIENNA_CICHLID and only TA firmware is requested during boot, so only need release TA firmware when remove device. [ 83.877150] general protection fault, probably for non-canonical address 0x1269f97e6ed04095: 0000 [#1] SMP PTI [ 83.888076] CPU: 0 PID: 1312 Comm: modprobe Tainted: G W OE 5.9.0-rc5-deli-amd-vangogh-0.0.6.6-114-gdd99d5669a96-dirty #2 [ 83.901160] Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018 [ 83.912353] RIP: 0010:free_fw_priv+0xc/0x120 [ 83.917531] Code: e8 99 cd b0 ff b8 a1 ff ff ff eb 9f 4c 89 f7 e8 8a cd b0 ff b8 f4 ff ff ff eb 90 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 41 54 53 <4c> 8b 67 18 48 89 fb 4c 89 e7 e8 45 94 41 00 b8 ff ff ff ff f0 0f [ 83.937576] RSP: 0018:ffffbc34c13a3ce0 EFLAGS: 00010206 [ 83.943699] RAX: ffffffffbb681850 RBX: ffffa047f117eb60 RCX: 0000000080800055 [ 83.951879] RDX: ffffbc34c1d5f000 RSI: 0000000080800055 RDI: 1269f97e6ed04095 [ 83.959955] RBP: ffffbc34c13a3cf0 R08: 0000000000000000 R09: 0000000000000001 [ 83.968107] R10: ffffbc34c13a3cc8 R11: 00000000ffffff00 R12: ffffa047d6b23378 [ 83.976166] R13: ffffa047d6b23338 R14: ffffa047d6b240c8 R15: 0000000000000000 [ 83.984295] FS: 00007f74f6712540(0000) GS:ffffa047fbe00000(0000) knlGS:0000000000000000 [ 83.993323] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 84.000056] CR2: 0000556a1cca4e18 CR3: 000000021faa8004 CR4: 00000000003706f0 [ 84.008128] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 84.016155] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 84.024174] Call Trace: [ 84.027514] release_firmware.part.11+0x4b/0x70 [ 84.033017] release_firmware+0x13/0x20 [ 84.037803] psp_sw_fini+0x77/0xb0 [amdgpu] [ 84.042857] amdgpu_device_fini+0x38c/0x5d0 [amdgpu] [ 84.048815] amdgpu_driver_unload_kms+0x43/0x70 [amdgpu] [ 84.055055] drm_dev_unregister+0x73/0xb0 [drm] [ 84.060499] drm_dev_unplug+0x28/0x30 [drm] [ 84.065598] amdgpu_dev_uninit+0x1b/0x40 [amdgpu] [ 84.071223] amdgpu_pci_remove+0x4e/0x70 [amdgpu] [ 84.076835] pci_device_remove+0x3e/0xc0 [ 84.081609] device_release_driver_internal+0xfb/0x1c0 [ 84.087558] driver_detach+0x4d/0xa0 [ 84.092041] bus_remove_driver+0x5f/0xe0 [ 84.096854] driver_unregister+0x2f/0x50 [ 84.101594] pci_unregister_driver+0x22/0xa0 [ 84.106806] amdgpu_exit+0x15/0x2b [amdgpu] Signed-off-by: Dennis Li <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>

The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <[email protected]> Signed-off-by: Xin Zeng <[email protected]> Signed-off-by: Liu Yi L <[email protected]> Acked-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>

While mounting a crafted image provided by user, kernel panics due to the invalid chunk item whose end is less than start. [66.387422] loop: module loaded [66.389773] loop0: detected capacity change from 262144 to 0 [66.427708] BTRFS: device fsid a62e00e8-e94e-4200-8217-12444de93c2e devid 1 transid 12 /dev/loop0 scanned by mount (613) [66.431061] BTRFS info (device loop0): disk space caching is enabled [66.431078] BTRFS info (device loop0): has skinny extents [66.437101] BTRFS error: insert state: end < start 29360127 37748736 [66.437136] ------------[ cut here ]------------ [66.437140] WARNING: CPU: 16 PID: 613 at fs/btrfs/extent_io.c:557 insert_state.cold+0x1a/0x46 [btrfs] [66.437369] CPU: 16 PID: 613 Comm: mount Tainted: G O 5.11.0-rc1-custom linux-kernel-labs#45 [66.437374] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014 [66.437378] RIP: 0010:insert_state.cold+0x1a/0x46 [btrfs] [66.437420] RSP: 0018:ffff93e5414c3908 EFLAGS: 00010286 [66.437427] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000 [66.437431] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff [66.437434] RBP: ffff93e5414c3938 R08: 0000000000000001 R09: 0000000000000001 [66.437438] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d72aa0 [66.437441] R13: ffff8ec78bc71628 R14: 0000000000000000 R15: 0000000002400000 [66.437447] FS: 00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000 [66.437451] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66.437455] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0 [66.437460] PKRU: 55555554 [66.437464] Call Trace: [66.437475] set_extent_bit+0x652/0x740 [btrfs] [66.437539] set_extent_bits_nowait+0x1d/0x20 [btrfs] [66.437576] add_extent_mapping+0x1e0/0x2f0 [btrfs] [66.437621] read_one_chunk+0x33c/0x420 [btrfs] [66.437674] btrfs_read_chunk_tree+0x6a4/0x870 [btrfs] [66.437708] ? kvm_sched_clock_read+0x18/0x40 [66.437739] open_ctree+0xb32/0x1734 [btrfs] [66.437781] ? bdi_register_va+0x1b/0x20 [66.437788] ? super_setup_bdi_name+0x79/0xd0 [66.437810] btrfs_mount_root.cold+0x12/0xeb [btrfs] [66.437854] ? __kmalloc_track_caller+0x217/0x3b0 [66.437873] legacy_get_tree+0x34/0x60 [66.437880] vfs_get_tree+0x2d/0xc0 [66.437888] vfs_kern_mount.part.0+0x78/0xc0 [66.437897] vfs_kern_mount+0x13/0x20 [66.437902] btrfs_mount+0x11f/0x3c0 [btrfs] [66.437940] ? kfree+0x5ff/0x670 [66.437944] ? __kmalloc_track_caller+0x217/0x3b0 [66.437962] legacy_get_tree+0x34/0x60 [66.437974] vfs_get_tree+0x2d/0xc0 [66.437983] path_mount+0x48c/0xd30 [66.437998] __x64_sys_mount+0x108/0x140 [66.438011] do_syscall_64+0x38/0x50 [66.438018] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [66.438023] RIP: 0033:0x7f0138827f6e [66.438033] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [66.438040] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e [66.438044] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0 [66.438047] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001 [66.438050] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [66.438054] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440 [66.438078] irq event stamp: 18169 [66.438082] hardirqs last enabled at (18175): [<ffffffffb81154bf>] console_unlock+0x4ff/0x5f0 [66.438088] hardirqs last disabled at (18180): [<ffffffffb8115427>] console_unlock+0x467/0x5f0 [66.438092] softirqs last enabled at (16910): [<ffffffffb8a00fe2>] asm_call_irq_on_stack+0x12/0x20 [66.438097] softirqs last disabled at (16905): [<ffffffffb8a00fe2>] asm_call_irq_on_stack+0x12/0x20 [66.438103] ---[ end trace e114b111db64298b ]--- [66.438107] BTRFS error: found node 12582912 29360127 on insert of 37748736 29360127 [66.438127] BTRFS critical: panic in extent_io_tree_panic:679: locking error: extent tree was modified by another thread while locked (errno=-17 Object already exists) [66.441069] ------------[ cut here ]------------ [66.441072] kernel BUG at fs/btrfs/extent_io.c:679! [66.442064] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [66.443018] CPU: 16 PID: 613 Comm: mount Tainted: G W O 5.11.0-rc1-custom linux-kernel-labs#45 [66.444538] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014 [66.446223] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs] [66.450878] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246 [66.451840] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000 [66.453141] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff [66.454445] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001 [66.455743] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0 [66.457055] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000 [66.458356] FS: 00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000 [66.459841] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66.460895] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0 [66.462196] PKRU: 55555554 [66.462692] Call Trace: [66.463139] set_extent_bit.cold+0x30/0x98 [btrfs] [66.464049] set_extent_bits_nowait+0x1d/0x20 [btrfs] [66.490466] add_extent_mapping+0x1e0/0x2f0 [btrfs] [66.514097] read_one_chunk+0x33c/0x420 [btrfs] [66.534976] btrfs_read_chunk_tree+0x6a4/0x870 [btrfs] [66.555718] ? kvm_sched_clock_read+0x18/0x40 [66.575758] open_ctree+0xb32/0x1734 [btrfs] [66.595272] ? bdi_register_va+0x1b/0x20 [66.614638] ? super_setup_bdi_name+0x79/0xd0 [66.633809] btrfs_mount_root.cold+0x12/0xeb [btrfs] [66.652938] ? __kmalloc_track_caller+0x217/0x3b0 [66.671925] legacy_get_tree+0x34/0x60 [66.690300] vfs_get_tree+0x2d/0xc0 [66.708221] vfs_kern_mount.part.0+0x78/0xc0 [66.725808] vfs_kern_mount+0x13/0x20 [66.742730] btrfs_mount+0x11f/0x3c0 [btrfs] [66.759350] ? kfree+0x5ff/0x670 [66.775441] ? __kmalloc_track_caller+0x217/0x3b0 [66.791750] legacy_get_tree+0x34/0x60 [66.807494] vfs_get_tree+0x2d/0xc0 [66.823349] path_mount+0x48c/0xd30 [66.838753] __x64_sys_mount+0x108/0x140 [66.854412] do_syscall_64+0x38/0x50 [66.869673] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [66.885093] RIP: 0033:0x7f0138827f6e [66.945613] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [66.977214] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e [66.994266] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0 [67.011544] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001 [67.028836] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [67.045812] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440 [67.216138] ---[ end trace e114b111db64298c ]--- [67.237089] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs] [67.325317] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246 [67.347946] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000 [67.371343] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff [67.394757] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001 [67.418409] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0 [67.441906] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000 [67.465436] FS: 00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000 [67.511660] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [67.535047] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0 [67.558449] PKRU: 55555554 [67.581146] note: mount[613] exited with preempt_count 2 The image has a chunk item which has a logical start 37748736 and length 18446744073701163008 (-8M). The calculated end 29360127 overflows. EEXIST was caught by insert_state() because of the duplicate end and extent_io_tree_panic() was called. Add overflow check of chunk item end to tree checker so it can be detected early at mount time. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208929 CC: [email protected] # 4.19+ Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Su Yue <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

Ido Schimmel says: ==================== nexthop: Various fixes This series contains various fixes for the nexthop code. The bugs were uncovered during the development of resilient nexthop groups. Patches #1-#2 fix the error path of nexthop_create_group(). I was not able to trigger these bugs with current code, but it is possible with the upcoming resilient nexthop groups code which adds a user controllable memory allocation further in the function. Patch #3 fixes wrong validation of netlink attributes. Patch #4 fixes wrong invocation of mausezahn in a selftest. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.11, take #1 - VM init cleanups - PSCI relay cleanups - Kill CONFIG_KVM_ARM_PMU - Fixup __init annotations - Fixup reg_to_encoding() - Fix spurious PMCR_EL0 access

We had kernel panic, it is caused by unload module and last close confirmation. call trace: [1196029.743127] free_sess+0x15/0x50 [rtrs_client] [1196029.743128] rtrs_clt_close+0x4c/0x70 [rtrs_client] [1196029.743129] ? rnbd_clt_unmap_device+0x1b0/0x1b0 [rnbd_client] [1196029.743130] close_rtrs+0x25/0x50 [rnbd_client] [1196029.743131] rnbd_client_exit+0x93/0xb99 [rnbd_client] [1196029.743132] __x64_sys_delete_module+0x190/0x260 And in the crashdump confirmation kworker is also running. PID: 6943 TASK: ffff9e2ac8098000 CPU: 4 COMMAND: "kworker/4:2" #0 [ffffb206cf337c30] __schedule at ffffffff9f93f891 #1 [ffffb206cf337cc8] schedule at ffffffff9f93fe98 #2 [ffffb206cf337cd0] schedule_timeout at ffffffff9f943938 #3 [ffffb206cf337d50] wait_for_completion at ffffffff9f9410a7 #4 [ffffb206cf337da0] __flush_work at ffffffff9f08ce0e #5 [ffffb206cf337e20] rtrs_clt_close_conns at ffffffffc0d5f668 [rtrs_client] #6 [ffffb206cf337e48] rtrs_clt_close at ffffffffc0d5f801 [rtrs_client] linux-kernel-labs#7 [ffffb206cf337e68] close_rtrs at ffffffffc0d26255 [rnbd_client] linux-kernel-labs#8 [ffffb206cf337e78] free_sess at ffffffffc0d262ad [rnbd_client] linux-kernel-labs#9 [ffffb206cf337e88] rnbd_clt_put_dev at ffffffffc0d266a7 [rnbd_client] The problem is both code path try to close same session, which lead to panic. To fix it, just skip the sess if the refcount already drop to 0. Fixes: f7a7a5c ("block/rnbd: client: main functionality") Signed-off-by: Jack Wang <[email protected]> Reviewed-by: Gioh Kim <[email protected]> Signed-off-by: Jens Axboe <[email protected]>

The buffer list can have zero skb as following path: tipc_named_node_up()->tipc_node_xmit()->tipc_link_xmit(), so we need to check the list before casting an &sk_buff. Fault report: [] tipc: Bulk publication failure [] general protection fault, probably for non-canonical [#1] PREEMPT [...] [] KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf] [] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 5.10.0-rc4+ #2 [] Hardware name: Bochs ..., BIOS Bochs 01/01/2011 [] RIP: 0010:tipc_link_xmit+0xc1/0x2180 [] Code: 24 b8 00 00 00 00 4d 39 ec 4c 0f 44 e8 e8 d7 0a 10 f9 48 [...] [] RSP: 0018:ffffc90000006ea0 EFLAGS: 00010202 [] RAX: dffffc0000000000 RBX: ffff8880224da000 RCX: 1ffff11003d3cc0d [] RDX: 0000000000000019 RSI: ffffffff886007b9 RDI: 00000000000000c8 [] RBP: ffffc90000007018 R08: 0000000000000001 R09: fffff52000000ded [] R10: 0000000000000003 R11: fffff52000000dec R12: ffffc90000007148 [] R13: 0000000000000000 R14: 0000000000000000 R15: ffffc90000007018 [] FS: 0000000000000000(0000) GS:ffff888037400000(0000) knlGS:000[...] [] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [] CR2: 00007fffd2db5000 CR3: 000000002b08f000 CR4: 00000000000006f0 Fixes: af9b028 ("tipc: make media xmit call outside node spinlock context") Acked-by: Jon Maloy <[email protected]> Signed-off-by: Hoang Le <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Ido Schimmel says: ==================== mlxsw: core: Thermal control fixes This series includes two fixes for thermal control in mlxsw. Patch #1 validates that the alarm temperature threshold read from a transceiver is above the warning temperature threshold. If not, the current thresholds are maintained. It was observed that some transceiver might be unreliable and sometimes report a too low alarm temperature threshold which would result in thermal shutdown of the system. Patch #2 increases the temperature threshold above which thermal shutdown is triggered for the ASIC thermal zone. It is currently too low and might result in thermal shutdown under perfectly fine operational conditions. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

general protection fault, probably for non-canonical address 0xdffffc0000000022: 0000 [#1] KASAN: null-ptr-deref in range [0x0000000000000110-0x0000000000000117] RIP: 0010:io_ring_set_wakeup_flag fs/io_uring.c:6929 [inline] RIP: 0010:io_disable_sqo_submit+0xdb/0x130 fs/io_uring.c:8891 Call Trace: io_uring_create fs/io_uring.c:9711 [inline] io_uring_setup+0x12b1/0x38e0 fs/io_uring.c:9739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 io_disable_sqo_submit() might be called before user rings were allocated, don't do io_ring_set_wakeup_flag() in those cases. Reported-by: [email protected] Fixes: d9d0521 ("io_uring: stop SQPOLL submit on creator's death") Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>

On some specific hardware on early boot we occasionally get: [ 1193.920255][ T0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 1193.936616][ T0] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/69 [ 1193.953233][ T0] no locks held by swapper/69/0. [ 1193.965871][ T0] irq event stamp: 575062 [ 1193.977724][ T0] hardirqs last enabled at (575061): [<ffffffffab73f662>] tick_nohz_idle_exit+0xe2/0x3e0 [ 1194.002762][ T0] hardirqs last disabled at (575062): [<ffffffffab74e8af>] flush_smp_call_function_from_idle+0x4f/0x80 [ 1194.029035][ T0] softirqs last enabled at (575050): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20 [ 1194.054227][ T0] softirqs last disabled at (575043): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20 [ 1194.079389][ T0] CPU: 69 PID: 0 Comm: swapper/69 Not tainted 5.10.6-cloudflare-kasan-2021.1.4-dev #1 [ 1194.104103][ T0] Hardware name: NULL R162-Z12-CD/MZ12-HD4-CD, BIOS R10 06/04/2020 [ 1194.119591][ T0] Call Trace: [ 1194.130233][ T0] dump_stack+0x9a/0xcc [ 1194.141617][ T0] ___might_sleep.cold+0x180/0x1b0 [ 1194.153825][ T0] mempool_alloc+0x16b/0x300 [ 1194.165313][ T0] ? remove_element+0x160/0x160 [ 1194.176961][ T0] ? blk_mq_end_request+0x4b/0x490 [ 1194.188778][ T0] crypt_convert+0x27f6/0x45f0 [dm_crypt] [ 1194.201024][ T0] ? rcu_read_lock_sched_held+0x3f/0x70 [ 1194.212906][ T0] ? module_assert_mutex_or_preempt+0x3e/0x70 [ 1194.225318][ T0] ? __module_address.part.0+0x1b/0x3a0 [ 1194.237212][ T0] ? is_kernel_percpu_address+0x5b/0x190 [ 1194.249238][ T0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [dm_crypt] [ 1194.261593][ T0] ? is_module_address+0x25/0x40 [ 1194.272905][ T0] ? static_obj+0x8a/0xc0 [ 1194.283582][ T0] ? lockdep_init_map_waits+0x26a/0x700 [ 1194.295570][ T0] ? __raw_spin_lock_init+0x39/0x110 [ 1194.307330][ T0] kcryptd_crypt_read_convert+0x31c/0x560 [dm_crypt] [ 1194.320496][ T0] ? kcryptd_queue_crypt+0x1be/0x380 [dm_crypt] [ 1194.333203][ T0] blk_update_request+0x6d7/0x1500 [ 1194.344841][ T0] ? blk_mq_trigger_softirq+0x190/0x190 [ 1194.356831][ T0] blk_mq_end_request+0x4b/0x490 [ 1194.367994][ T0] ? blk_mq_trigger_softirq+0x190/0x190 [ 1194.379693][ T0] flush_smp_call_function_queue+0x24b/0x560 [ 1194.391847][ T0] flush_smp_call_function_from_idle+0x59/0x80 [ 1194.403969][ T0] do_idle+0x287/0x450 [ 1194.413891][ T0] ? arch_cpu_idle_exit+0x40/0x40 [ 1194.424716][ T0] ? lockdep_hardirqs_on_prepare+0x286/0x3f0 [ 1194.436399][ T0] ? _raw_spin_unlock_irqrestore+0x39/0x40 [ 1194.447759][ T0] cpu_startup_entry+0x19/0x20 [ 1194.458038][ T0] secondary_startup_64_no_verify+0xb0/0xbb IO completion can be queued to a different CPU by the block subsystem as a "call single function/data". The CPU may run these routines from the idle task, but it does so with interrupts disabled. It is not a good idea to do decryption with irqs disabled even in an idle task context, so just defer it to a tasklet (as is done with requests from hard irqs). Fixes: 39d42fa ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: [email protected] # v5.9+ Signed-off-by: Ignat Korchagin <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>

Suspending/resuming with an HDMI dongle attached leads to crashes from an audio regmap. Unable to handle kernel paging request at virtual address ffffffc018068000 Mem abort info: ESR = 0x96000047 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000047 CM = 0, WnR = 1 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000081b12000 [ffffffc018068000] pgd=0000000275d14003, pud=0000000275d14003, pmd=000000026365d003, pte=0000000000000000 Internal error: Oops: 96000047 [#1] PREEMPT SMP Call trace: regmap_mmio_write32le+0x2c/0x40 regmap_mmio_write+0x48/0x6c _regmap_bus_reg_write+0x34/0x44 _regmap_write+0x100/0x150 regcache_default_sync+0xc0/0x138 regcache_sync+0x188/0x26c lpass_platform_pcmops_resume+0x48/0x54 [snd_soc_lpass_platform] snd_soc_component_resume+0x28/0x40 soc_resume_deferred+0x6c/0x178 process_one_work+0x208/0x3c8 worker_thread+0x23c/0x3e8 kthread+0x144/0x178 ret_from_fork+0x10/0x18 Code: d503201f d50332bf f94002a8 8b344108 (b9000113) I can reliably reproduce this problem by running 'tail' on the registers file in debugfs for the hdmi regmap. # tail /sys/kernel/debug/regmap/62d87000.lpass-lpass_hdmi/registers [ 84.658733] Unable to handle kernel paging request at virtual address ffffffd0128e800c This crash happens because we're trying to read registers from the regmap beyond the length of the mapping created by ioremap(). The number of hdmi_rdma_channels determines the size of the regmap via this code in sound/soc/qcom/lpass-cpu.c: lpass_hdmi_regmap_config.max_register = LPAIF_HDMI_RDMAPER_REG(variant, variant->hdmi_rdma_channels); According to debugfs the size of the regmap is 0x68010 but according to the DTS file posted in [1] the size is only 0x68000 (see the first reg property of the lpass_cpu node). Let's change the number of channels to be 3 instead of 4 so the math works out to have a max register of 0x67010, nicely fitting inside of the region size of 0x68000. Note: I tried to bump up the size of the register region to the next page to include the 0x68010 register but then the tail command caused SErrors with an async abort, implying that the register region doesn't exist or it isn't clocked because the bus is telling us that the register read failed. I reduce the number of channels and played audio through the HDMI channel and it kept working so I think this is correct. Fixes: 2ad63dc ("ASoC: qcom: sc7180: Add support for audio over DP") Link: https://lore.kernel.org/r/[email protected] [1] Cc: V Sujith Kumar Reddy <[email protected]> Cc: Srinivasa Rao <[email protected]> Cc: Srinivas Kandagatla <[email protected]> Cc: Cheng-Yi Chiang <[email protected]> Signed-off-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

If dobj->control is not initialized we end up in an OOPs during skl_tplg_complete: [ 26.553358] BUG: kernel NULL pointer dereference, address: 0000000000000078 [ 26.561151] #PF: supervisor read access in kernel mode [ 26.566897] #PF: error_code(0x0000) - not-present page [ 26.572642] PGD 0 P4D 0 [ 26.575479] Oops: 0000 [#1] PREEMPT SMP PTI [ 26.580158] CPU: 2 PID: 2082 Comm: udevd Tainted: G C 5.4.81 #4 [ 26.588232] Hardware name: HP Soraka/Soraka, BIOS Google_Soraka.10431.106.0 12/03/2019 [ 26.597082] RIP: 0010:skl_tplg_complete+0x70/0x144 [snd_soc_skl] Fixes: 2d744ec ("ASoC: Intel: Skylake: Automatic DMIC format configuration according to information from NHL") Signed-off-by: Ricardo Ribalda <[email protected]> Reviewed-by: Cezary Rojewski <[email protected]> Tested-by: Lukasz Majczak <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

Some extra flags are printed to the trace header when using the PREEMPT_RT config. The extra flags are: need-resched-lazy, preempt-lazy-depth, and migrate-disable. Without printing these fields, the timerlat specific fields are shifted by three positions, for example: # tracer: timerlat # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # || / # |||| ACTIVATION # TASK-PID CPU# |||| TIMESTAMP ID CONTEXT LATENCY # | | | |||| | | | | <idle>-0 [000] d..h... 3279.798871: #1 context irq timer_latency 830 ns <...>-807 [000] ....... 3279.798881: #1 context thread timer_latency 11301 ns Add a new header for timerlat with the missing fields, to be used when the PREEMPT_RT is enabled. Link: https://lkml.kernel.org/r/babb83529a3211bd0805be0b8c21608230202c55.1626598844.git.bristot@kernel.org Cc: Tom Zanussi <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Masami Hiramatsu <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>

… event name The following commands: # echo 'read_max u64 size;' > synthetic_events # echo 'hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)' > events/syscalls/sys_enter_read/trigger Causes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 4 PID: 1763 Comm: bash Not tainted 5.14.0-rc2-test+ linux-kernel-labs#155 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strcmp+0xc/0x20 Code: 75 f7 31 c0 0f b6 0c 06 88 0c 02 48 83 c0 01 84 c9 75 f1 4c 89 c0 c3 0f 1f 80 00 00 00 00 31 c0 eb 08 48 83 c0 01 84 d2 74 0f <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 31 c0 c3 66 90 48 89 RSP: 0018:ffffb5fdc0963ca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffb3a4e040 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9714c0d0b640 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000022986b7cde R09: ffffffffb3a4dff8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9714c50603c8 R13: 0000000000000000 R14: ffff97143fdf9e48 R15: ffff9714c01a2210 FS: 00007f1fa6785740(0000) GS:ffff9714da400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000002d863004 CR4: 00000000001706e0 Call Trace: __find_event_file+0x4e/0x80 action_create+0x6b7/0xeb0 ? kstrdup+0x44/0x60 event_hist_trigger_func+0x1a07/0x2130 trigger_process_regex+0xbd/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xe9/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1fa6879e87 The problem was the "trace(read_max,count)" where the "count" should be "$count" as "onmax()" only handles variables (although it really should be able to figure out that "count" is a field of sys_enter_read). But there's a path that does not find the variable and ends up passing a NULL for the event, which ends up getting passed to "strcmp()". Add a check for NULL to return and error on the command with: # cat error_log hist:syscalls:sys_enter_read: error: Couldn't create or find variable Command: hist:keys=common_pid:count=count:onmax($count).trace(read_max,count) ^ Link: https://lkml.kernel.org/r/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: [email protected] Fixes: 5045060 tracing: Add 'onmax' hist trigger action support Reviewed-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>

…king KUEP Commit b5efec0 ("powerpc/32s: Move KUEP locking/unlocking in C") removed the 'isync' instruction after adding/removing NX bit in user segments. The reasoning behind this change was that when setting the NX bit we don't mind it taking effect with delay as the kernel never executes text from userspace, and when clearing the NX bit this is to return to userspace and then the 'rfi' should synchronise the context. However, it looks like on book3s/32 having a hash page table, at least on the G3 processor, we get an unexpected fault from userspace, then this is followed by something wrong in the verification of MSR_PR at end of another interrupt. This is fixed by adding back the removed isync() following update of NX bit in user segment registers. Only do it for cores with an hash table, as 603 cores don't exhibit that problem and the two isync increase ./null_syscall selftest by 6 cycles on an MPC 832x. First problem: unexpected WARN_ON() for mysterious PROTFAULT WARNING: CPU: 0 PID: 1660 at arch/powerpc/mm/fault.c:354 do_page_fault+0x6c/0x5b0 Modules linked in: CPU: 0 PID: 1660 Comm: Xorg Not tainted 5.13.0-pmac-00028-gb3c15b60339a linux-kernel-labs#40 NIP: c001b5c8 LR: c001b6f8 CTR: 00000000 REGS: e2d09e40 TRAP: 0700 Not tainted (5.13.0-pmac-00028-gb3c15b60339a) MSR: 00021032 <ME,IR,DR,RI> CR: 42d04f30 XER: 20000000 GPR00: c000424c e2d09f00 c301b680 e2d09f40 0000001e 42000000 00cba028 00000000 GPR08: 08000000 48000010 c301b680 e2d09f30 22d09f30 00c1fff0 00cba000 a7b7ba4c GPR16: 00000031 00000000 00000000 00000000 00000000 00000000 a7b7b0d0 00c5c010 GPR24: a7b7b64c a7b7d2f0 00000004 00000000 c1efa6c0 00cba02c 00000300 e2d09f40 NIP [c001b5c8] do_page_fault+0x6c/0x5b0 LR [c001b6f8] do_page_fault+0x19c/0x5b0 Call Trace: [e2d09f00] [e2d09f04] 0xe2d09f04 (unreliable) [e2d09f30] [c000424c] DataAccess_virt+0xd4/0xe4 --- interrupt: 300 at 0xa7a261dc NIP: a7a261dc LR: a7a253bc CTR: 00000000 REGS: e2d09f40 TRAP: 0300 Not tainted (5.13.0-pmac-00028-gb3c15b60339a) MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 228428e2 XER: 20000000 DAR: 00cba02c DSISR: 42000000 GPR00: a7a27448 afa6b0e0 a74c35c0 a7b7b614 0000001e a7b7b614 00cba028 00000000 GPR08: 00020fd9 00000031 00cb9ff8 a7a273b0 220028e2 00c1fff0 00cba000 a7b7ba4c GPR16: 00000031 00000000 00000000 00000000 00000000 00000000 a7b7b0d0 00c5c010 GPR24: a7b7b64c a7b7d2f0 00000004 00000002 0000001e a7b7b614 a7b7aff4 00000030 NIP [a7a261dc] 0xa7a261dc LR [a7a253bc] 0xa7a253bc --- interrupt: 300 Instruction dump: 7c4a1378 810300a0 75278410 83820298 83a300a4 553b018c 551e0036 4082038c 2e1b0000 40920228 75280800 41820220 <0fe00000> 3b600000 41920214 81420594 Second problem: MSR PR is seen unset allthough the interrupt frame shows it set kernel BUG at arch/powerpc/kernel/interrupt.c:458! Oops: Exception in kernel mode, sig: 5 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac Modules linked in: CPU: 0 PID: 1660 Comm: Xorg Tainted: G W 5.13.0-pmac-00028-gb3c15b60339a linux-kernel-labs#40 NIP: c0011434 LR: c001629c CTR: 00000000 REGS: e2d09e70 TRAP: 0700 Tainted: G W (5.13.0-pmac-00028-gb3c15b60339a) MSR: 00029032 <EE,ME,IR,DR,RI> CR: 42d09f30 XER: 00000000 GPR00: 00000000 e2d09f30 c301b680 e2d09f40 83440000 c44d0e68 e2d09e8c 00000000 GPR08: 00000002 00dc228a 00004000 e2d09f30 22d09f30 00c1fff0 afa6ceb4 00c26144 GPR16: 00c25fb8 00c26140 afa6ceb8 90000000 00c944d8 0000001c 00000000 00200000 GPR24: 00000000 000001fb afa6d1b4 00000001 00000000 a539a2a0 a530fd80 00000089 NIP [c0011434] interrupt_exit_kernel_prepare+0x10/0x70 LR [c001629c] interrupt_return+0x9c/0x144 Call Trace: [e2d09f30] [c000424c] DataAccess_virt+0xd4/0xe4 (unreliable) --- interrupt: 300 at 0xa09be008 NIP: a09be008 LR: a09bdfe8 CTR: a09bdfc0 REGS: e2d09f40 TRAP: 0300 Tainted: G W (5.13.0-pmac-00028-gb3c15b60339a) MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 420028e2 XER: 20000000 DAR: a539a308 DSISR: 0a000000 GPR00: a7b90d50 afa6b2d0 a74c35c0 a0a8b690 a0a8b698 a5365d70 a4fa82a8 00000004 GPR08: 00000000 a09bdfc0 00000000 a5360000 a09bde7c 00c1fff0 afa6ceb4 00c26144 GPR16: 00c25fb8 00c26140 afa6ceb8 90000000 00c944d8 0000001c 00000000 00200000 GPR24: 00000000 000001fb afa6d1b4 00000001 00000000 a539a2a0 a530fd80 00000089 NIP [a09be008] 0xa09be008 LR [a09bdfe8] 0xa09bdfe8 --- interrupt: 300 Instruction dump: 80010024 83e1001c 7c0803a6 4bffff80 3bc00800 4bffffd0 486b42fd 4bffffcc 81430084 71480002 41820038 554a0462 <0f0a0000> 80620060 74630001 40820034 Fixes: b5efec0 ("powerpc/32s: Move KUEP locking/unlocking in C") Cc: [email protected] # v5.13+ Reported-by: Stan Johnson <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/4856f5574906e2aec0522be17bf3848a22b2cd0b.1629269345.git.christophe.leroy@csgroup.eu

Laurent reported that STRICT_MODULE_RWX was causing intermittent crashes on one of his systems: kernel tried to execute exec-protected page (c008000004073278) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0xc008000004073278 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: drm virtio_console fuse drm_panel_orientation_quirks ... CPU: 3 PID: 44 Comm: kworker/3:1 Not tainted 5.14.0-rc4+ linux-kernel-labs#12 Workqueue: events control_work_handler [virtio_console] NIP: c008000004073278 LR: c008000004073278 CTR: c0000000001e9de0 REGS: c00000002e4ef7e0 TRAP: 0400 Not tainted (5.14.0-rc4+) MSR: 800000004280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 200400cf ... NIP fill_queue+0xf0/0x210 [virtio_console] LR fill_queue+0xf0/0x210 [virtio_console] Call Trace: fill_queue+0xb4/0x210 [virtio_console] (unreliable) add_port+0x1a8/0x470 [virtio_console] control_work_handler+0xbc/0x1e8 [virtio_console] process_one_work+0x290/0x590 worker_thread+0x88/0x620 kthread+0x194/0x1a0 ret_from_kernel_thread+0x5c/0x64 Jordan, Fabiano & Murilo were able to reproduce and identify that the problem is caused by the call to module_enable_ro() in do_init_module(), which happens after the module's init function has already been called. Our current implementation of change_page_attr() is not safe against concurrent accesses, because it invalidates the PTE before flushing the TLB and then installing the new PTE. That leaves a window in time where there is no valid PTE for the page, if another CPU tries to access the page at that time we see something like the fault above. We can't simply switch to set_pte_at()/flush TLB, because our hash MMU code doesn't handle a set_pte_at() of a valid PTE. See [1]. But we do have pte_update(), which replaces the old PTE with the new, meaning there's no window where the PTE is invalid. And the hash MMU version hash__pte_update() deals with synchronising the hash page table correctly. [1]: https://lore.kernel.org/linuxppc-dev/[email protected]/ Fixes: 1f9ad21 ("powerpc/mm: Implement set_memory() routines") Reported-by: Laurent Vivier <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Reviewed-by: Murilo Opsfelder Araújo <[email protected]> Tested-by: Laurent Vivier <[email protected]> Signed-off-by: Fabiano Rosas <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]

…e_zone btrfs_can_activate_zone() can be called with the device_list_mutex already held, which will lead to a deadlock: insert_dev_extents() // Takes device_list_mutex `-> insert_dev_extent() `-> btrfs_insert_empty_item() `-> btrfs_insert_empty_items() `-> btrfs_search_slot() `-> btrfs_cow_block() `-> __btrfs_cow_block() `-> btrfs_alloc_tree_block() `-> btrfs_reserve_extent() `-> find_free_extent() `-> find_free_extent_update_loop() `-> can_allocate_chunk() `-> btrfs_can_activate_zone() // Takes device_list_mutex again Instead of using the RCU on fs_devices->device_list we can use fs_devices->alloc_list, protected by the chunk_mutex to traverse the list of active devices. We are in the chunk allocation thread. The newer chunk allocation happens from the devices in the fs_device->alloc_list protected by the chunk_mutex. btrfs_create_chunk() lockdep_assert_held(&info->chunk_mutex); gather_device_info list_for_each_entry(device, &fs_devices->alloc_list, dev_alloc_list) Also, a device that reappears after the mount won't join the alloc_list yet and, it will be in the dev_list, which we don't want to consider in the context of the chunk alloc. [15.166572] WARNING: possible recursive locking detected [15.167117] 5.17.0-rc6-dennis linux-kernel-labs#79 Not tainted [15.167487] -------------------------------------------- [15.167733] kworker/u8:3/146 is trying to acquire lock: [15.167733] ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: find_free_extent+0x15a/0x14f0 [btrfs] [15.167733] [15.167733] but task is already holding lock: [15.167733] ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_create_pending_block_groups+0x20a/0x560 [btrfs] [15.167733] [15.167733] other info that might help us debug this: [15.167733] Possible unsafe locking scenario: [15.167733] [15.171834] CPU0 [15.171834] ---- [15.171834] lock(&fs_devs->device_list_mutex); [15.171834] lock(&fs_devs->device_list_mutex); [15.171834] [15.171834] *** DEADLOCK *** [15.171834] [15.171834] May be due to missing lock nesting notation [15.171834] [15.171834] 5 locks held by kworker/u8:3/146: [15.171834] #0: ffff888100050938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1c3/0x5a0 [15.171834] #1: ffffc9000067be80 ((work_completion)(&fs_info->async_data_reclaim_work)){+.+.}-{0:0}, at: process_one_work+0x1c3/0x5a0 [15.176244] #2: ffff88810521e620 (sb_internal){.+.+}-{0:0}, at: flush_space+0x335/0x600 [btrfs] [15.176244] #3: ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_create_pending_block_groups+0x20a/0x560 [btrfs] [15.176244] #4: ffff8881152e4b78 (btrfs-dev-00){++++}-{3:3}, at: __btrfs_tree_lock+0x27/0x130 [btrfs] [15.179641] [15.179641] stack backtrace: [15.179641] CPU: 1 PID: 146 Comm: kworker/u8:3 Not tainted 5.17.0-rc6-dennis linux-kernel-labs#79 [15.179641] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014 [15.179641] Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] [15.179641] Call Trace: [15.179641] <TASK> [15.179641] dump_stack_lvl+0x45/0x59 [15.179641] __lock_acquire.cold+0x217/0x2b2 [15.179641] lock_acquire+0xbf/0x2b0 [15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs] [15.183838] __mutex_lock+0x8e/0x970 [15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs] [15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs] [15.183838] ? lock_is_held_type+0xd7/0x130 [15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs] [15.183838] find_free_extent+0x15a/0x14f0 [btrfs] [15.183838] ? _raw_spin_unlock+0x24/0x40 [15.183838] ? btrfs_get_alloc_profile+0x106/0x230 [btrfs] [15.187601] btrfs_reserve_extent+0x131/0x260 [btrfs] [15.187601] btrfs_alloc_tree_block+0xb5/0x3b0 [btrfs] [15.187601] __btrfs_cow_block+0x138/0x600 [btrfs] [15.187601] btrfs_cow_block+0x10f/0x230 [btrfs] [15.187601] btrfs_search_slot+0x55f/0xbc0 [btrfs] [15.187601] ? lock_is_held_type+0xd7/0x130 [15.187601] btrfs_insert_empty_items+0x2d/0x60 [btrfs] [15.187601] btrfs_create_pending_block_groups+0x2b3/0x560 [btrfs] [15.187601] __btrfs_end_transaction+0x36/0x2a0 [btrfs] [15.192037] flush_space+0x374/0x600 [btrfs] [15.192037] ? find_held_lock+0x2b/0x80 [15.192037] ? btrfs_async_reclaim_data_space+0x49/0x180 [btrfs] [15.192037] ? lock_release+0x131/0x2b0 [15.192037] btrfs_async_reclaim_data_space+0x70/0x180 [btrfs] [15.192037] process_one_work+0x24c/0x5a0 [15.192037] worker_thread+0x4a/0x3d0 Fixes: a85f05e ("btrfs: zoned: avoid chunk allocation if active block group has enough space") CC: [email protected] # 5.16+ Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Johannes Thumshirn <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

FRR folks have hit a kernel warning[1] while deleting routes[2] which is caused by trying to delete a route pointing to a nexthop id without specifying nhid but matching on an interface. That is, a route is found but we hit a warning while matching it. The warning is from fib_info_nh() in include/net/nexthop.h because we run it on a fib_info with nexthop object. The call chain is: inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a nexthop fib_info and also with fc_oif set thus calling fib_info_nh on the fib_info and triggering the warning). The fix is to not do any matching in that branch if the fi has a nexthop object because those are managed separately. I.e. we should match when deleting without nh spec and should fail when deleting a nexthop route with old-style nh spec because nexthop objects are managed separately, e.g.: $ ip r show 1.2.3.4/32 1.2.3.4 nhid 12 via 192.168.11.2 dev dummy0 $ ip r del 1.2.3.4/32 $ ip r del 1.2.3.4/32 nhid 12 <both should work> $ ip r del 1.2.3.4/32 dev dummy0 <should fail with ESRCH> [1] [ 523.462226] ------------[ cut here ]------------ [ 523.462230] WARNING: CPU: 14 PID: 22893 at include/net/nexthop.h:468 fib_nh_match+0x210/0x460 [ 523.462236] Modules linked in: dummy rpcsec_gss_krb5 xt_socket nf_socket_ipv4 nf_socket_ipv6 ip6table_raw iptable_raw bpf_preload xt_statistic ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs xt_mark nf_tables xt_nat veth nf_conntrack_netlink nfnetlink xt_addrtype br_netfilter overlay dm_crypt nfsv3 nfs fscache netfs vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack 8021q garp mrp ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bridge stp llc rfcomm snd_seq_dummy snd_hrtimer rpcrdma rdma_cm iw_cm ib_cm ib_core ip6table_filter xt_comment ip6_tables vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) qrtr bnep binfmt_misc xfs vfat fat squashfs loop nvidia_drm(POE) nvidia_modeset(POE) nvidia_uvm(POE) nvidia(POE) intel_rapl_msr intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi btusb btrtl iwlmvm uvcvideo btbcm snd_hda_intel edac_mce_amd [ 523.462274] videobuf2_vmalloc videobuf2_memops btintel snd_intel_dspcfg videobuf2_v4l2 snd_intel_sdw_acpi bluetooth snd_usb_audio snd_hda_codec mac80211 snd_usbmidi_lib joydev snd_hda_core videobuf2_common kvm_amd snd_rawmidi snd_hwdep snd_seq videodev ccp snd_seq_device libarc4 ecdh_generic mc snd_pcm kvm iwlwifi snd_timer drm_kms_helper snd cfg80211 cec soundcore irqbypass rapl wmi_bmof i2c_piix4 rfkill k10temp pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc drm zram ip_tables crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel nvme sp5100_tco r8169 nvme_core wmi ipmi_devintf ipmi_msghandler fuse [ 523.462300] CPU: 14 PID: 22893 Comm: ip Tainted: P OE 5.16.18-200.fc35.x86_64 #1 [ 523.462302] Hardware name: Micro-Star International Co., Ltd. MS-7C37/MPG X570 GAMING EDGE WIFI (MS-7C37), BIOS 1.C0 10/29/2020 [ 523.462303] RIP: 0010:fib_nh_match+0x210/0x460 [ 523.462304] Code: 7c 24 20 48 8b b5 90 00 00 00 e8 bb ee f4 ff 48 8b 7c 24 20 41 89 c4 e8 ee eb f4 ff 45 85 e4 0f 85 2e fe ff ff e9 4c ff ff ff <0f> 0b e9 17 ff ff ff 3c 0a 0f 85 61 fe ff ff 48 8b b5 98 00 00 00 [ 523.462306] RSP: 0018:ffffaa53d4d87928 EFLAGS: 00010286 [ 523.462307] RAX: 0000000000000000 RBX: ffffaa53d4d87a90 RCX: ffffaa53d4d87bb0 [ 523.462308] RDX: ffff9e3d2ee6be80 RSI: ffffaa53d4d87a90 RDI: ffffffff920ed380 [ 523.462309] RBP: ffff9e3d2ee6be80 R08: 0000000000000064 R09: 0000000000000000 [ 523.462310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000031 [ 523.462310] R13: 0000000000000020 R14: 0000000000000000 R15: ffff9e3d331054e0 [ 523.462311] FS: 00007f245517c1c0(0000) GS:ffff9e492ed80000(0000) knlGS:0000000000000000 [ 523.462313] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 523.462313] CR2: 000055e5dfdd8268 CR3: 00000003ef488000 CR4: 0000000000350ee0 [ 523.462315] Call Trace: [ 523.462316] <TASK> [ 523.462320] fib_table_delete+0x1a9/0x310 [ 523.462323] inet_rtm_delroute+0x93/0x110 [ 523.462325] rtnetlink_rcv_msg+0x133/0x370 [ 523.462327] ? _copy_to_iter+0xb5/0x6f0 [ 523.462330] ? rtnl_calcit.isra.0+0x110/0x110 [ 523.462331] netlink_rcv_skb+0x50/0xf0 [ 523.462334] netlink_unicast+0x211/0x330 [ 523.462336] netlink_sendmsg+0x23f/0x480 [ 523.462338] sock_sendmsg+0x5e/0x60 [ 523.462340] ____sys_sendmsg+0x22c/0x270 [ 523.462341] ? import_iovec+0x17/0x20 [ 523.462343] ? sendmsg_copy_msghdr+0x59/0x90 [ 523.462344] ? __mod_lruvec_page_state+0x85/0x110 [ 523.462348] ___sys_sendmsg+0x81/0xc0 [ 523.462350] ? netlink_seq_start+0x70/0x70 [ 523.462352] ? __dentry_kill+0x13a/0x180 [ 523.462354] ? __fput+0xff/0x250 [ 523.462356] __sys_sendmsg+0x49/0x80 [ 523.462358] do_syscall_64+0x3b/0x90 [ 523.462361] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 523.462364] RIP: 0033:0x7f24552aa337 [ 523.462365] Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 523.462366] RSP: 002b:00007fff7f05a838 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 523.462368] RAX: ffffffffffffffda RBX: 000000006245bf91 RCX: 00007f24552aa337 [ 523.462368] RDX: 0000000000000000 RSI: 00007fff7f05a8a0 RDI: 0000000000000003 [ 523.462369] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 523.462370] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000001 [ 523.462370] R13: 00007fff7f05ce08 R14: 0000000000000000 R15: 000055e5dfdd1040 [ 523.462373] </TASK> [ 523.462374] ---[ end trace ba537bc16f6bf4ed ]--- [2] FRRouting/frr#6412 Fixes: 4c7e808 ("ipv4: Plumb support for nexthop object in a fib_info") Signed-off-by: Nikolay Aleksandrov <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>

the driver uses libata's "tag" values from in various arrays. Since the mentioned patch bumped the ATA_TAG_INTERNAL to 32, the value of the SATA_DWC_QCMD_MAX needs to account for that. Otherwise ATA_TAG_INTERNAL usage cause similar crashes like this as reported by Tice Rex on the OpenWrt Forum and reproduced (with symbols) here: | BUG: Kernel NULL pointer dereference at 0x00000000 | Faulting instruction address: 0xc03ed4b8 | Oops: Kernel access of bad area, sig: 11 [#1] | BE PAGE_SIZE=4K PowerPC 44x Platform | CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0 | NIP: c03ed4b8 LR: c03d27e8 CTR: c03ed36c | REGS: cfa59950 TRAP: 0300 Not tainted (5.4.163) | MSR: 00021000 <CE,ME> CR: 42000222 XER: 00000000 | DEAR: 00000000 ESR: 00000000 | GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...] | [..] | NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254 | LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc | Call Trace: | [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable) | [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc | [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524 | [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0 | [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204 | [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130 | [...] This is because sata_dwc_dma_xfer_complete() NULLs the dma_pending's next neighbour "chan" (a *dma_chan struct) in this '32' case right here (line ~735): > hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE; Then the next time, a dma gets issued; dma_dwc_xfer_setup() passes the NULL'd hsdevp->chan to the dmaengine_slave_config() which then causes the crash. With this patch, SATA_DWC_QCMD_MAX is now set to ATA_MAX_QUEUE + 1. This avoids the OOB. But please note, there was a worthwhile discussion on what ATA_TAG_INTERNAL and ATA_MAX_QUEUE is. And why there should not be a "fake" 33 command-long queue size. Ideally, the dw driver should account for the ATA_TAG_INTERNAL. In Damien Le Moal's words: "... having looked at the driver, it is a bigger change than just faking a 33rd "tag" that is in fact not a command tag at all." Fixes: 28361c4 ("libata: add extra internal command") Cc: [email protected] # 4.18+ BugLink: openwrt/openwrt#9505 Signed-off-by: Christian Lamparter <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>

…date_bw [Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 linux-kernel-labs#12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled. Signed-off-by: CHANDAN VURDIGERE NATARAJ <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]

OF framebuffers do not have an underlying device in the Linux device hierarchy. Do a regular unregister call instead of hot unplugging such a non-existing device. Fixes a NULL dereference. An example error message on ppc64le is shown below. BUG: Kernel NULL pointer dereference on read at 0x00000060 Faulting instruction address: 0xc00000000080dfa4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries [...] CPU: 2 PID: 139 Comm: systemd-udevd Not tainted 5.17.0-ae085d7f9365 #1 NIP: c00000000080dfa4 LR: c00000000080df9c CTR: c000000000797430 REGS: c000000004132fe0 TRAP: 0300 Not tainted (5.17.0-ae085d7f9365) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28228282 XER: 20000000 CFAR: c00000000000c80c DAR: 0000000000000060 DSISR: 40000000 IRQMASK: 0 GPR00: c00000000080df9c c000000004133280 c00000000169d200 0000000000000029 GPR04: 00000000ffffefff c000000004132f90 c000000004132f88 0000000000000000 GPR08: c0000000015658f8 c0000000015cd200 c0000000014f57d0 0000000048228283 GPR12: 0000000000000000 c00000003fffe300 0000000020000000 0000000000000000 GPR16: 0000000000000000 0000000113fc4a40 0000000000000005 0000000113fcfb80 GPR20: 000001000f7283b0 0000000000000000 c000000000e4a588 c000000000e4a5b0 GPR24: 0000000000000001 00000000000a0000 c008000000db0168 c0000000021f6ec0 GPR28: c0000000016d65a8 c000000004b36460 0000000000000000 c0000000016d64b0 NIP [c00000000080dfa4] do_remove_conflicting_framebuffers+0x184/0x1d0 [c000000004133280] [c00000000080df9c] do_remove_conflicting_framebuffers+0x17c/0x1d0 (unreliable) [c000000004133350] [c00000000080e4d0] remove_conflicting_framebuffers+0x60/0x150 [c0000000041333a0] [c00000000080e6f4] remove_conflicting_pci_framebuffers+0x134/0x1b0 [c000000004133450] [c008000000e70438] drm_aperture_remove_conflicting_pci_framebuffers+0x90/0x100 [drm] [c000000004133490] [c008000000da0ce4] bochs_pci_probe+0x6c/0xa64 [bochs] [...] [c000000004133db0] [c00000000002aaa0] system_call_exception+0x170/0x2d0 [c000000004133e10] [c00000000000c3cc] system_call_common+0xec/0x250 The bug [1] was introduced by commit 27599aa ("fbdev: Hot-unplug firmware fb devices on forced removal"). Most firmware framebuffers have an underlying platform device, which can be hot-unplugged before loading the native graphics driver. OF framebuffers do not (yet) have that device. Fix the code by unregistering the framebuffer as before without a hot unplug. Tested with 5.17 on qemu ppc64le emulation. Signed-off-by: Thomas Zimmermann <[email protected]> Fixes: 27599aa ("fbdev: Hot-unplug firmware fb devices on forced removal") Reported-by: Sudip Mukherjee <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Tested-by: Sudip Mukherjee <[email protected]> Cc: Zack Rusin <[email protected]> Cc: Javier Martinez Canillas <[email protected]> Cc: Hans de Goede <[email protected]> Cc: [email protected] # v5.11+ Cc: Helge Deller <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Zheyu Ma <[email protected]> Cc: Xiyu Yang <[email protected]> Cc: Zhen Lei <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Tetsuo Handa <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/all/YkHXO6LGHAN0p1pq@debian/ # [1] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

We are accessing "desc->ops" in sof_pci_probe without checking "desc" pointer. This results in NULL pointer exception if pci_id->driver_data i.e desc pointer isn't defined in sof device probe: BUG: kernel NULL pointer dereference, address: 0000000000000060 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:sof_pci_probe+0x1e/0x17f [snd_sof_pci] Code: Unable to access opcode bytes at RIP 0xffffffffc043dff4. RSP: 0018:ffffac4b03b9b8d8 EFLAGS: 00010246 Add NULL pointer check for sof_dev_desc pointer to avoid such exception. Signed-off-by: Ajit Kumar Pandey <[email protected]>

We are accessing "desc->ops" in sof_pci_probe without checking "desc" pointer. This results in NULL pointer exception if pci_id->driver_data i.e desc pointer isn't defined in sof device probe: BUG: kernel NULL pointer dereference, address: 0000000000000060 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:sof_pci_probe+0x1e/0x17f [snd_sof_pci] Code: Unable to access opcode bytes at RIP 0xffffffffc043dff4. RSP: 0018:ffffac4b03b9b8d8 EFLAGS: 00010246 Add NULL pointer check for sof_dev_desc pointer to avoid such exception. Reviewed-by: Ranjani Sridharan <[email protected]> Signed-off-by: Ajit Kumar Pandey <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

TEST for CI

a3cf947

Signed-off-by: Daniel Baluta <[email protected]>

dbaluta force-pushed the sof-dev-x branch from feb2173 to 4b1b480 Compare November 15, 2019 13:29

dbaluta force-pushed the sof-dev branch from cf7a368 to 5f1585d Compare November 15, 2019 13:38

dbaluta force-pushed the sof-dev-x branch from 4b1b480 to be9b534 Compare November 15, 2019 13:41

xxx

97f7be5

Signed-off-by: Daniel Baluta <[email protected]>

dbaluta force-pushed the sof-dev-x branch from be9b534 to 97f7be5 Compare November 15, 2019 16:03

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

TEST for CI #1

TEST for CI #1

dbaluta commented Nov 15, 2019

TEST for CI #1

TEST for CI #1

Conversation

dbaluta commented Nov 15, 2019