Bike keeps pedalling #221
Replies: 7 comments 9 replies
-
|
change the throttle start input to 1.1v, if it keeps happening raise it until it doesn’t happen anymore.
Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Yes, I hoped a other version would resolve this. But I will try the 1.1v fix. I just hope i can upgrade it back to version 1.4 |
Beta Was this translation helpful? Give feedback.
-
|
The 1.1 volt throttle start should fix it. I was just wondering if it somehow worked on v1.3 because it should be the same problem there. Thanks for confirming that. |
Beta Was this translation helpful? Give feedback.
-
|
Do you also know if i can flash V1.4 back on my bike? |
Beta Was this translation helpful? Give feedback.
-
|
Yes you can just load v1.4. After you load v1.4 just use the v1.4 app to change the values you need. |
Beta Was this translation helpful? Give feedback.
-
|
I @dav0000000 @WvBijsterveld |
Beta Was this translation helpful? Give feedback.
-
|
Super thank you! I will try it out tonight and let you know.
Best ,
Ian
Op di 21 mei 2024 08:32 schreef Wesley ***@***.***>:
… change the throttle start input to 1.1v, if it keeps happening raise it
until it doesn’t happen anymore.
Message ID: ***@***.***>
—
Reply to this email directly, view it on GitHub
<#221 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BITTZHC37SILPDEBBKTNMBDZDLS7JAVCNFSM6AAAAABH74LL62VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TKMBUGI4TC>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Yes you can, should be no different, if any issue begins check your configuration. otherwise use the latest firmware u have no problems with.
|
Beta Was this translation helpful? Give feedback.
-
|
with power output reading i can’t help, with battery SOC reading, so the %. it’s to do with the upper V limit and low volt limit. LVC and HVC i believe. simply just enter on the high one how many volts your battery is when full and on the low when it is completely empty. that should do the trick
|
Beta Was this translation helpful? Give feedback.
-
|
@WvBijsterveld @dav0000000 the 1.1v trick worked! Many thanks!!! It cuts off when I fully press the throttle fully down so i need to adjust the upper voltage. For the battery voltage limit do i need a multimeter or just read the specs of the battery? |
Beta Was this translation helpful? Give feedback.
-
|
just read the specs of your battery
, you can search the voltage cutoffs for 48/52v and enter them accordingly.
|
Beta Was this translation helpful? Give feedback.
-
|
I have a 48v 20ah hailong max battery Would that mean 42v cutoff? 54.6 high cutoff? |
Beta Was this translation helpful? Give feedback.
-
|
54.6 is perfect, the 42v limit sounds right but there is a subjective range. depending on if you want more cycles out of your battery(it to last longer) by not going too low charge for the battery.
but you should look into that if interested
to sum it up the values you have given are perfect
|
Beta Was this translation helpful? Give feedback.
-
Hello, Thanks for opening this open to the public. I currently started the bike and it starts pedaling without any human input. Do you know what settings I need to change to only start the motor if I start pedaling.
Beta Was this translation helpful? Give feedback.
All reactions