Move matrix config to info.json, part 3 (qmk#19991)

Co-authored-by: Nick Brassel <[email protected]>
coquizen · Jun 22, 2023 · 0d556ef · 0d556ef
1 parent 08ca3e2
commit 0d556ef
Show file tree

Hide file tree

Showing 623 changed files with 1,593 additions and 4,581 deletions.
diff --git a/keyboards/e88/config.h b/keyboards/e88/config.h
@@ -16,24 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B7, D7, B4, C6, B5, B6 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, D0, D1, D2, D3, B3, B2, B1, E6, D5, D6, D4 }
-
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/e88/info.json b/keyboards/e88/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0187",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "D0", "D1", "D2", "D3", "B3", "B2", "B1", "E6", "D5", "D6", "D4"],
+        "rows": ["B7", "D7", "B4", "C6", "B5", "B6"]
+    },
+    "diode_direction": "COL2ROW",
     "qmk_lufa_bootloader": {
         "esc_input": "B7",
         "esc_output": "F0"

diff --git a/keyboards/ealdin/quadrant/config.h b/keyboards/ealdin/quadrant/config.h
@@ -17,13 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_ROW_PINS { B2, F7, B3, B6, B1 }
-#define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B7, F6, F5, F4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN C7
 #ifdef RGB_DI_PIN
    #define RGBLED_NUM 7

diff --git a/keyboards/ealdin/quadrant/info.json b/keyboards/ealdin/quadrant/info.json
@@ -8,6 +8,11 @@
         "pid": "0x5154",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D3", "D2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5", "B7", "F6", "F5", "F4"],
+        "rows": ["B2", "F7", "B3", "B6", "B1"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "D5", "pin_b": "F1"}

diff --git a/keyboards/earth_rover/config.h b/keyboards/earth_rover/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/earth_rover/info.json b/keyboards/earth_rover/info.json
@@ -8,6 +8,11 @@
         "pid": "0xEE11",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F7"],
+        "rows": ["D4", "C6", "D7", "E6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {

diff --git a/keyboards/eason/aeroboard/config.h b/keyboards/eason/aeroboard/config.h
@@ -3,10 +3,6 @@
 
 #pragma once
 
-#define MATRIX_COL_PINS { B9, B8, B7, B6, B5, B4, B3, B11, A15, A10, A9, B14, B13, B12, A5, A4 }
-#define MATRIX_ROW_PINS { B10, B1, B0, A7, A6 }
-#define DIODE_DIRECTION COL2ROW
-
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/eason/aeroboard/info.json b/keyboards/eason/aeroboard/info.json
@@ -8,6 +8,11 @@
         "pid": "0x8870",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B9", "B8", "B7", "B6", "B5", "B4", "B3", "B11", "A15", "A10", "A9", "B14", "B13", "B12", "A5", "A4"],
+        "rows": ["B10", "B1", "B0", "A7", "A6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F103",
     "bootloader": "stm32duino",
     "layouts": {

diff --git a/keyboards/eason/capsule65/config.h b/keyboards/eason/capsule65/config.h
@@ -16,22 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, D1, B7, D0, F5 }
-#define MATRIX_COL_PINS { D5, D2, D3, D4, D6, D7, B4, B5, B6, C6, C7, E2, B3, B1, B0, B2 }
-
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN F7
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD

diff --git a/keyboards/eason/capsule65/info.json b/keyboards/eason/capsule65/info.json
@@ -8,6 +8,11 @@
         "pid": "0x6E6E",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D5", "D2", "D3", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "E2", "B3", "B1", "B0", "B2"],
+        "rows": ["F4", "D1", "B7", "D0", "F5"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "F6"
     },

diff --git a/keyboards/eason/greatsword80/config.h b/keyboards/eason/greatsword80/config.h
@@ -16,11 +16,5 @@
 
 #pragma once
 
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5, D4 }
-#define MATRIX_COL_PINS { D6, D7, B4, B5, B6, C6, C7, E2, F7, F6, F5, F4, B0, B1, B2, B3 }
-
-
-#define DIODE_DIRECTION COL2ROW
-
 #define LED_CAPS_LOCK_PIN  F0
 #define LED_PIN_ON_STATE 0
diff --git a/keyboards/eason/greatsword80/info.json b/keyboards/eason/greatsword80/info.json
@@ -8,6 +8,11 @@
         "pid": "0x998F",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D6", "D7", "B4", "B5", "B6", "C6", "C7", "E2", "F7", "F6", "F5", "F4", "B0", "B1", "B2", "B3"],
+        "rows": ["D0", "D1", "D2", "D3", "D5", "D4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

diff --git a/keyboards/ebastler/isometria_75/rev1/config.h b/keyboards/ebastler/isometria_75/rev1/config.h
@@ -17,13 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_ROW_PINS { A15, B4, B5, B6, B7, B8}
-#define MATRIX_COL_PINS { B12, B13, B14, B15, A8, A10, A13, A14, B9, C13, F0, F1, A0, B2, B10, B11 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Backlight */
 #define BACKLIGHT_PWM_DRIVER PWMD1
 #define BACKLIGHT_PWM_CHANNEL 2

diff --git a/keyboards/ebastler/isometria_75/rev1/info.json b/keyboards/ebastler/isometria_75/rev1/info.json
@@ -8,6 +8,11 @@
         "pid": "0x1337",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B12", "B13", "B14", "B15", "A8", "A10", "A13", "A14", "B9", "C13", "F0", "F1", "A0", "B2", "B10", "B11"],
+        "rows": ["A15", "B4", "B5", "B6", "B7", "B8"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "C15", "pin_b": "C14", "resolution": 2}

diff --git a/keyboards/eco/config.h b/keyboards/eco/config.h
@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/eco/rev1/config.h b/keyboards/eco/rev1/config.h
diff --git a/keyboards/eco/rev1/info.json b/keyboards/eco/rev1/info.json
@@ -1,5 +1,10 @@
 {
     "usb": {
         "device_version": "0.0.1"
-    }
+    },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F7", "B5", "B4", "E6", "D7", "C6", "D4", "D0", "D1", "D2", "D3"],
+        "rows": ["B1", "B6", "B2", "B3"]
+    },
+    "diode_direction": "COL2ROW"
 }
diff --git a/keyboards/eco/rev2/config.h b/keyboards/eco/rev2/config.h
diff --git a/keyboards/eco/rev2/info.json b/keyboards/eco/rev2/info.json
@@ -1,5 +1,10 @@
 {
     "usb": {
         "device_version": "0.0.2"
-    }
+    },
+    "matrix_pins": {
+        "cols": ["D1", "D0", "D4", "C6", "B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4", "D2", "D3"],
+        "rows": ["D7", "B5", "B4", "E6"]
+    },
+    "diode_direction": "COL2ROW"
 }
diff --git a/keyboards/edc40/config.h b/keyboards/edc40/config.h
@@ -15,22 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
- #define MATRIX_ROW_PINS { D4, D6, D7, F7 }
- #define MATRIX_COL_PINS { B0, B1, B2, B3, D0, D1, D2, D3, D5, B4, B5 }
-
- #define DIODE_DIRECTION COL2ROW
-
 #define LOCKING_SUPPORT_ENABLE
 #define LOCKING_RESYNC_ENABLE
 #define RGB_DI_PIN C6
diff --git a/keyboards/edc40/info.json b/keyboards/edc40/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0002",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B0", "B1", "B2", "B3", "D0", "D1", "D2", "D3", "D5", "B4", "B5"],
+        "rows": ["D4", "D6", "D7", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

diff --git a/keyboards/edda/config.h b/keyboards/edda/config.h
@@ -13,15 +13,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS {F1, F0, E6, B5, B4}
-#define MATRIX_COL_PINS {F4, F5, F6, F7, C7, C6, B6, B3, D7, D6, D4, D5, D3, D2, D1, D0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 // Indicators
 #define INDICATOR_PIN_0 B2
 #define INDICATOR_PIN_1 B1

diff --git a/keyboards/edda/info.json b/keyboards/edda/info.json
@@ -8,6 +8,11 @@
         "pid": "0x4544",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F7", "C7", "C6", "B6", "B3", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0"],
+        "rows": ["F1", "F0", "E6", "B5", "B4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "qmk-dfu",
     "community_layouts": ["alice", "alice_split_bs"],

diff --git a/keyboards/edi/hardlight/mk1/config.h b/keyboards/edi/hardlight/mk1/config.h
@@ -17,24 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, D4, D6, D7, B4 }
-#define MATRIX_COL_PINS { E6, F0, F1, F4, F5, F6, F7, B5 }
-
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/edi/hardlight/mk1/info.json b/keyboards/edi/hardlight/mk1/info.json
@@ -6,8 +6,13 @@
         "pid": "0x2401",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["E6", "F0", "F1", "F4", "F5", "F6", "F7", "B5"],
+        "rows": ["B0", "B1", "B2", "B3", "D4", "D6", "D7", "B4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
-    "bootloader": "atmel-dfu"
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_ortho_4x16": {
             "layout": [