This firmware is a fork from flipperdevices/flipperzero-firmware
Our goal is to make any features possible in this device without any limitations!
Please help us implement emulation for all subghz dynamic (rolling code) protocols!
This software is for experimental purposes only and is not meant for any illegal activity/purposes.
We do not condone illegal activity and strongly encourage keeping transmissions to legal/valid uses allowed by law.
Also this software is made without any support from Flipper Devices and in no way related to official devs.
Our Discord Community:
- SubGHz regional TX restrictions removed
- SubGHz frequency range can be extended in settings file (Warning: It can damage flipper's hardware)
- Many rolling code protocols now have the ability to save & send captured signals
- FAAC SLH (Spa) & BFT Mitto (secure with seed) manual creation
- Sub-GHz static code brute-force plugin
- LFRFID Fuzzer plugin
- Custom community plugins and games added
- Extra SubGHz frequencies + extra Mifare Classic keys
- Picopass/iClass plugin included in releases
- Recompiled IR TV Universal Remote for ALL buttons
- Universal remote for Projectors, Fans, A/Cs and Audio(soundbars, etc.)
- BadUSB keyboard layouts
- Customizable Flipper name
- SubGHz -> Press OK in frequency analyzer to use detected frequency in Read modes
- SubGHz -> Long press OK button in SubGHz Frequency analyzer to switch to Read menu
- Other small fixes and changes throughout
- See other changes in changelog and in readme below
Also check changelog in releases for latest updates!
- Keeloq [Not ALL systems supported for decode or emulation yet!] - Supported manufacturers list
- Keeloq: HCS101
- Keeloq: AN-Motors
- Keeloq: JCM Tech
- Keeloq: MHouse
- Keeloq: Nice Smilo
- Keeloq: DTM Neo
- Keeloq: FAAC RC,XT
- Keeloq: Mutancode
- Keeloq: Normstahl
- CAME Atomo
- Nice Flor S
- FAAC SLH (Spa) [External seed calculation required (For info contact me in Discord: Nano#8998)]
- BFT Mitto [External seed calculation required (For info contact me in Discord: Nano#8998)]
- Security+ v1 & v2
- Star Line
- Boosty: https://boosty.to/mmxdev
- destream (100 EUR min): https://destream.net/live/MMX/donate
- cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
- USDT(TRC20):
TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs - BCH:
qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3 - ETH/BSC/ERC20-Tokens:
darkflippers.eth(or0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a) - BTC:
bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9 - DOGE:
D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv - LTC:
ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
- RFID Fuzzer plugin (by Ganapati & @xMasterX) & New protocols by @mvanzanten
- Sub-GHz bruteforce plugin (by @derskythe & xMasterX) (original by Ganapati)
- Sub-GHz playlist plugin (by darmiel)
- ESP8266 Deauther plugin (by SequoiaSan)
- WiFi Scanner plugin (by SequoiaSan)
- MultiConverter plugin (by theisolinearchip)
- USB Keyboard plugin (by huuck)
- WAV player plugin (fixed) (OFW: DrZlo13)
- Barcode generator plugin (original by McAzzaMan) - EAN-8 and refactoring by @msvsergey
- GPIO: Sentry Safe plugin (by H4ckd4ddy)
- ESP32: WiFi Marauder companion plugin (by 0xchocolate)
- NRF24: Sniffer & MouseJacker (with changes) (by mothball187)
- Simple Clock (timer by GMMan / settings by kowalski7cc) (original by CompaqDisc)
- UniversalRF Remix / Sub-GHz Remote (by @darmiel & @xMasterX) (original by @ESurge)
- Spectrum Analyzer (with changes) (by jolcese) - Ultra Narrow mode & scan channels non-consecutively
- Metronome (by panki27)
- DTMF Dolphin (by litui)
- TOTP (Authenticator) (by akopachov)
- GPS (by ezod) works with module
NMEA 0183via UART (13TX, 14RX, GND pins on Flipper) - i2c Tools (by NaejEL) - C0 -> SCL / C1 -> SDA / GND -> GND | 3v3 logic levels only!
- Temperature Sensor Plugin - HTU2xD, SHT2x, SI702x, SI700x, SI701x, AM2320 (by Mywk) - How to Connect
- HC-SR04 Distance sensor - Ported and modified by @xMasterX (original by Sanqui) - How to connect -> (5V -> VCC) / (GND -> GND) / (13|TX -> Trig) / (14|RX -> Echo)
- Morse Code (by wh00hw)
- AM2320/AM2321 Temp. Sensor plugin (by xMasterX) - How to Connect
- DHT11/22 Temp. Sensor Monitor (by quen0n) - How to connect -> (5V -> VCC) / (GND -> GND) / (Selected Pin -> out)
- BH1750 - Lightmeter (by oleksiikutuzov)
- iButton Fuzzer (by xMasterX)
- HEX Viewer (by QtRoS)
Games:
- DOOM (fixed) (by p4nic4ttack)
- Zombiez (Reworked By DevMilanIan) (Original By Dooskington)
- Flappy Bird (by DroomOne)
- Arkanoid (refactored by xMasterX) (by gotnull)
- Tic Tac Toe (refactored by xMasterX) (by gotnull)
- Tetris (with fixes) (by jeffplang)
- Minesweeper (by panki27)
- Heap Defence (aka Stack Attack) - Ported to latest firmware by @xMasterX - (original by wquinoa & Vedmein)
- Game15 (by x27)
- Solitaire (by teeebor)
- BlackJack (by teeebor)
- BadUSB -> Keyboard layouts (by rien > dummy-decoy)
- SubGHz -> New frequency analyzer - (by ClusterM)
- SubGHz -> Detect RAW feature - (by perspecdev)
- SubGHz -> Save last used frequency and modulation (by derskythe)
- SubGHz -> Press OK in frequency analyzer to use detected frequency in Read modes (by derskythe)
- SubGHz -> Long press OK button in SubGHz Frequency analyzer to switch to Read menu (by derskythe)
- Lock device with pin(or regular lock if pin not set) by holding UP button on main screen (by an4tur0r)
-
Unofficial Discord: discord.unleashedflip.com
-
Docs by atmanos / How to write your own app (outdated API): https://flipper.atmanos.com/docs/overview/intro
-
Official Docs: http://docs.flipperzero.one
-
Official Forum: forum.flipperzero.one
applications- Applications and services used in firmwareassets- Assets used by applications and servicesfuri- Furi Core: os level primitives and helpersdebug- Debug tool: GDB-plugins, SVD-file and etcdocumentation- Documentation generation system configs and input filesfirmware- Firmware source codelib- Our and 3rd party libraries, drivers and etc...site_scons- Build helpersscripts- Supplementary scripts and python libraries home
Also pay attention to ReadMe.md files inside those directories.