Merge pull request #39763 from bsunanda/Run3-sim134

Run3-sim134 Modify the scripts to get geometry statistics for phase2 scenarios

SimG4Core/PrintGeomInfo/python/g4PrintGeomSummary_cfi.py

@@ -3,16 +3,10 @@
 def printGeomSummary(process):
 
     process.load("SimGeneral.HepPDTESSource.pdt_cfi")
-
-    process.load("Geometry.TrackerNumberingBuilder.trackerNumberingGeometry_cfi")
-    process.load("Geometry.MuonNumbering.muonNumberingInitialization_cfi")
-    process.load("Geometry.EcalCommonData.ecalSimulationParameters_cff")
-    process.load("Geometry.HcalCommonData.hcalDDDSimConstants_cff")
     process.load("IOMC.RandomEngine.IOMC_cff")
     process.load('IOMC.EventVertexGenerators.VtxSmearedFlat_cfi')
     process.load('GeneratorInterface.Core.generatorSmeared_cfi')
     process.load('FWCore.MessageService.MessageLogger_cfi')
-
     process.load("SimG4Core.Application.g4SimHits_cfi")
 
     process.source = cms.Source("EmptySource")

SimG4Core/PrintGeomInfo/test/python/g4OverlapCheck2026DD4hep_cfg.py

@@ -2,7 +2,7 @@
 # Way to use this:
 #   cmsRun g4OverlapCheck2026DD4hep_cfg.py geometry=D92 tol=0.1
 #
-#   Options for geometry D77, D83, D88, D92, D93
+#   Options for geometry D88, D92, D93
 #
 ###############################################################################
 import FWCore.ParameterSet.Config as cms
@@ -16,7 +16,7 @@
                  "D88",
                   VarParsing.VarParsing.multiplicity.singleton,
                   VarParsing.VarParsing.varType.string,
-                  "geometry of operations: D77, D83, D88, D92, D93")
+                  "geometry of operations: D88, D92, D93")
 options.register('tol',
                  0.1,
                  VarParsing.VarParsing.multiplicity.singleton,
@@ -33,17 +33,7 @@
 # Use the options
 
 from Configuration.ProcessModifiers.dd4hep_cff import dd4hep
-if (options.geometry == "D83"):
-    from Configuration.Eras.Era_Phase2C11M9_cff import Phase2C11M9
-    process = cms.Process('PROD',Phase2C11M9,dd4hep)
-    process.load('Configuration.Geometry.GeometryDD4hepExtended2026D83Reco_cff')
-    baseName = 'cms2026D83DD4hep'
-elif (options.geometry == "D77"):
-    from Configuration.Eras.Era_Phase2C11_cff import Phase2C11
-    process = cms.Process('PROD',Phase2C11,dd4hep)
-    process.load('Configuration.Geometry.GeometryDD4hepExtended2026D77Reco_cff')
-    baseName = 'cms2026D77DD4hep'
-elif (options.geometry == "D92"):
+if (options.geometry == "D92"):
     from Configuration.Eras.Era_Phase2C11M9_cff import Phase2C11M9
     process = cms.Process('PROD',Phase2C11M9,dd4hep)
     process.load('Configuration.Geometry.GeometryDD4hepExtended2026D92Reco_cff')

SimG4Core/PrintGeomInfo/test/python/g4OverlapCheck2026DDD_cfg.py

@@ -2,7 +2,7 @@
 # Way to use this:
 #   cmsRun g4OverlapCheck2026DDD_cfg.py geometry=D88 tol=0.1
 #
-#   Options for geometry D77, D83, D88, D92, D93
+#   Options for geometry D88, D92, D93
 #
 ###############################################################################
 import FWCore.ParameterSet.Config as cms
@@ -16,7 +16,7 @@
                  "D88",
                   VarParsing.VarParsing.multiplicity.singleton,
                   VarParsing.VarParsing.varType.string,
-                  "geometry of operations: D77, D83, D88, D92, D93")
+                  "geometry of operations: D88, D92, D93")
 options.register('tol',
                  0.1,
                  VarParsing.VarParsing.multiplicity.singleton,
@@ -32,17 +32,7 @@
 ####################################################################
 # Use the options
 
-if (options.geometry == "D83"):
-    from Configuration.Eras.Era_Phase2C11M9_cff import Phase2C11M9
-    process = cms.Process('PROD',Phase2C11M9)
-    process.load('Configuration.Geometry.GeometryExtended2026D83Reco_cff')
-    baseName = 'cms2026D83DDD'
-elif (options.geometry == "D77"):
-    from Configuration.Eras.Era_Phase2C11_cff import Phase2C11
-    process = cms.Process('PROD',Phase2C11)
-    process.load('Configuration.Geometry.GeometryExtended2026D77Reco_cff')
-    baseName = 'cms2026D77DDD'
-elif (options.geometry == "D92"):
+if (options.geometry == "D92"):
     from Configuration.Eras.Era_Phase2C11M9_cff import Phase2C11M9
     process = cms.Process('PROD',Phase2C11M9)
     process.load('Configuration.Geometry.GeometryExtended2026D92Reco_cff')

SimG4Core/PrintGeomInfo/test/python/g4OverlapCheck_dd4hep_cfg.py

@@ -1,3 +1,10 @@
+###############################################################################
+# Way to use this:
+#   cmsRun g4OverlapCheck_dd4hep_cfg.py tol=0.1
+#
+#   Options for tol 0.01, 0.1, 1.0
+#
+###############################################################################
 import FWCore.ParameterSet.Config as cms
 import FWCore.ParameterSet.VarParsing as VarParsing
 

SimG4Core/PrintGeomInfo/test/python/runSens_cfg.py

@@ -1,17 +1,43 @@
+###############################################################################
+# Way to use this:
+#   cmsRun runSens_cfg.py geometry=Run3
+#
+#   Options for geometry Run3, D88, D92, D93
+#
+###############################################################################
 import FWCore.ParameterSet.Config as cms
+import os, sys, imp, re
+import FWCore.ParameterSet.VarParsing as VarParsing
 
-from Configuration.Eras.Era_Run3_DDD_cff import Run3_DDD
-process = cms.Process('PrintGeometry',Run3_DDD)
-process.load('Configuration.Geometry.GeometryExtended2021Reco_cff')
+####################################################################
+### SETUP OPTIONS
+options = VarParsing.VarParsing('standard')
+options.register('geometry',
+                 "Run3",
+                  VarParsing.VarParsing.multiplicity.singleton,
+                  VarParsing.VarParsing.varType.string,
+                  "geometry of operations: Run3, D88, D92, D93")
 
-#from Configuration.Eras.Era_Run3_dd4hep_cff import Run3_dd4hep
-#process = cms.Process('PrintGeometry',Run3_dd4hep)
-#process.load('Configuration.Geometry.GeometryDD4hepExtended2021Reco_cff')
+### get and parse the command line arguments
+options.parseArguments()
 
-#from Configuration.Eras.Era_Phase2C11_cff import Phase2C11
-#process = cms.Process('PrintGeometry',Phase2C11)
-#process.load('Configuration.Geometry.GeometryExtended2026D83Reco_cff')
+print(options)
 
+#####p###############################################################
+# Use the options
+
+if (options.geometry == "Run3"):
+    geomFile = "Configuration.Geometry.GeometryExtended2021Reco_cff"
+    from Configuration.Eras.Era_Run3_DDD_cff import Run3_DDD
+    process = cms.Process('PrintSensitive',Run3_DDD)
+else:
+    geomFile = "Configuration.Geometry.GeometryExtended2026" + options.geometry + "Reco_cff"
+    from Configuration.Eras.Era_Phase2C11M9_cff import Phase2C11M9
+    process = cms.Process('PrintSensitive',Phase2C11M9)
+
+print("Geometry file: ", geomFile)
+
+process.load(geomFile)
 process.load('FWCore.MessageService.MessageLogger_cfi')
 
 process.MessageLogger.cerr.enable = False

SimG4Core/PrintGeomInfo/test/python/runSummary_cfg.py

@@ -1,14 +1,43 @@
+###############################################################################
+# Way to use this:
+#   cmsRun runSummary_cfg.py geometry=Run3
+#
+#   Options for geometry Run3, D88, D92, D93
+#
+###############################################################################
 import FWCore.ParameterSet.Config as cms
+import os, sys, imp, re
+import FWCore.ParameterSet.VarParsing as VarParsing
 
-from Configuration.Eras.Era_Run3_DDD_cff import Run3_DDD
-process = cms.Process('PrintGeometry',Run3_DDD)
-process.load('Configuration.Geometry.GeometryExtended2021Reco_cff')
+####################################################################
+### SETUP OPTIONS
+options = VarParsing.VarParsing('standard')
+options.register('geometry',
+                 "Run3",
+                  VarParsing.VarParsing.multiplicity.singleton,
+                  VarParsing.VarParsing.varType.string,
+                  "geometry of operations: Run3, D88, D92, D93")
 
-#from Configuration.Eras.Era_Phase2C11_cff import Phase2C11
-#process = cms.Process('PrintGeometry',Phase2C11)
-#process.load('Configuration.Geometry.GeometryExtended2026D77Reco_cff')
-#process.load('Configuration.Geometry.GeometryExtended2026D83Reco_cff')
+### get and parse the command line arguments
+options.parseArguments()
 
+print(options)
+
+#####p###############################################################
+# Use the options
+
+if (options.geometry == "Run3"):
+    geomFile = "Configuration.Geometry.GeometryExtended2021Reco_cff"
+    from Configuration.Eras.Era_Run3_DDD_cff import Run3_DDD
+    process = cms.Process('PrintGeometry',Run3_DDD)
+else:
+    geomFile = "Configuration.Geometry.GeometryExtended2026" + options.geometry + "Reco_cff"
+    from Configuration.Eras.Era_Phase2C11M9_cff import Phase2C11M9
+    process = cms.Process('PrintGeometry',Phase2C11M9)
+
+print("Geometry file: ", geomFile)
+
+process.load(geomFile)
 process.load('FWCore.MessageService.MessageLogger_cfi')
 
 if hasattr(process,'MessageLogger'):