Skip to content

How to use the Android Remote

Asfaloth edited this page Feb 27, 2014 · 1 revision

Activate Remote Control in Clementine

The remote control is disabled by default. You have to active it in the settings first. Go to the Settings and select the "Network Remote" item.

  • Port: You can change the port on which Clementine should listen for incoming connections.
  • Accept only private clients: Clementine will accept clients with a private ip only. (10.x.x.x, 172.16.x.x - 172.31.255.255, 192.168.x.x)
  • Use authentication code: Clients must enter this code in order to connect to Clementine

Clementine Remote Android App

You can download the Clementine Remote Android App here: Google Play Store or on the Project Website

Or just scan the QR-Code with your favourite scanner:

After you installed the app you can enter the ip-address of your computer to control Clementine. If you don't know it, check the network remote settings, your ip address is shown there. Enter it in the ip address field on Clementine Remote.

If you changed the port you have to change it in the app as well. Just open the settings and enter the port.

With the use of an authentication code Clementine Remote will promt a dialog. There you have to enter the code you specified in the settings in Clementine.