-
Notifications
You must be signed in to change notification settings - Fork 88
Advanced Configuration
Clayton Nummer edited this page Mar 11, 2020
·
7 revisions
Note: all variables listed below are optional
| Variable | Description | Type | Default |
|---|---|---|---|
| min_colortemp | Minimum color temperature to set. | Integer (1000-10000) | 2500 |
| max_colortemp | Maximum color temperature to set. | Integer (1000-10000) | 5500 |
| sunrise_offset | Positive/negative offset for sunrise. | Sting ((-)HH:MM:SS) | None |
| sunset_offset | Positive/negative offset for sunset. | Sting ((-)HH:MM:SS) | None |
| sunrise_time | Time for sunrise. | Time (HH:MM:SS) | None (use actual sunrise at location) |
| sunset_time | Time for sunset. | Time (HH:MM:SS) | None (use actual sunset at location) |
| latitude | Latitude used to determine sunrise/sunset. | Float (-90-90) | None (use homeassistant value) |
| longitude | Longitude used to determine sunrise/sunset. | Float (-180-180) | None (use homeassistant value) |
| elevation | Elevation used to determine sunrise/sunset. | Float | None (use homeassistant value) |
| interval | Frequency at which the lights should be updated (in seconds). | Positive integer | 300 (seconds - 5 minutes) |
| transition | Transition time for the light changes (high values may not be supported by all light models). | Float (0-6553) | 60 (seconds - 1 minute) |
Note: all variables listed below are optional, but one of lights_ct, lights_rgb, lights_xy, or lights_brightness should be set
| Variable | Description | Type | Default |
|---|---|---|---|
| name | The name to use when displaying this switch. | String | |
| lights_ct | List of light entities which should be set in mireds. | Array | |
| lights_rgb | List of light entities which should be set in RGB. | Array | |
| lights_xy | List of light entities which should be set in XY. | Array | |
| lights_brightness | List of light entities which should only have brightness adjusted. | Array | |
| disable_brightness_adjust | If true, brightness will not be adjusted | Boolean | False |
| min_brightness | Minimum brightness lights should be adjusted to (%). | Integer (1-100) | 1 |
| max_brightness | Maximum brightness lights should be adjusted to (%). | Integer (1-100) | 100 |
| sleep_entity | entity_id to use to determine "sleep" mode | entity_id | None |
| sleep_state | State that sleep entity must be in to activate "sleep" mode. | String | None |
| sleep_colortemp | Color temperature to set when in "sleep" mode. | Integer (1000-10000) | None |
| sleep_brightness | Brightness to set when in "sleep" mode. | Integer (1-100) | None |
| disable_entity | entity_id to use to disable this switch. | entity_id | None |
| disable_state | State that disable entity must be in to disable this switch. | String | None |
| initial_transition | Transition time for the light changes when the light or Circadian Lighting switch is first turned on or sleep state is changed (high values may not be supported by all light models). | Float (0-6553) | 1 (second) |