Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Temperature in/out heating systems #23

Closed
Thalassa47 opened this issue Dec 22, 2020 · 16 comments · Fixed by #25 or #26
Closed

Temperature in/out heating systems #23

Thalassa47 opened this issue Dec 22, 2020 · 16 comments · Fixed by #25 or #26
Assignees
Labels
enhancement New feature or request Released
Milestone

Comments

@Thalassa47
Copy link

Hi,
Please will you add the P1 Monitor in/out flow temperature data for heating systems.

Thx, Ben

@burnacid
Copy link
Owner

Will look at this. Though I don't use this feature my self through Ztatz I can only minic data. Not fully test

@burnacid
Copy link
Owner

burnacid commented Dec 23, 2020

Can you please send me the output of your API

http://{yourztatzurl}/api/v1/indoor/temperature
and
http://{yourztatzurl}/api/v1/indoor/temperature/minute

@burnacid burnacid self-assigned this Dec 23, 2020
@burnacid burnacid added the enhancement New feature or request label Dec 23, 2020
@Thalassa47
Copy link
Author

Thalassa47 commented Dec 23, 2020 via email

@burnacid
Copy link
Owner

Je zal me even moeten helpen gezien ik niet precies weet hoe de verwarming optie van ztatz werkt.

Dit voorbeeld:
["2020-12-23 16:25:03", 1608737103, 10, 24.175, 0.0, 24.0, 0.0, 24.005, 0.0, 24.0, 0.0]

De laatste 8 nummers betekenen het volgende

  • Room temperature input,raw data not processed in degrees Celsius. (24.175)
  • Room temperature input, low value in degrees Celsius. (0.0)
  • Room temperature input, average value degrees Celsius. (24.0)
  • Room temperature input, high value in degrees Celsius. (0.0)
  • Room temperature output,raw data not processed in degrees Celsius. (24.005)
  • Room temperature output, low value in degrees Celsius. (0.0)
  • Room temperature output, average value degrees Celsius. (24.0)
  • Room temperature output, high value in degrees Celsius. (0.0)

Kan je mij wellicht uitleggen wat het verschil tussen input en output is?
Welke data wil je in homey zichtbaar hebben en eventueel flows voor hebben?

burnacid added a commit that referenced this issue Dec 24, 2020
burnacid added a commit that referenced this issue Dec 24, 2020
burnacid added a commit that referenced this issue Dec 24, 2020
@burnacid burnacid added this to the Version 0.4.0 milestone Dec 24, 2020
@Thalassa47
Copy link
Author

Thalassa47 commented Dec 24, 2020 via email

@burnacid
Copy link
Owner

Helder. Daar moet ik ook maar eens in gaan duiken dan.

Even een voorbeeldje wat ik nu heb.
Screenshot_20201224-093504

Wat dan nog mist is de delta van in en out neem ik aan. En een flow card daarop

@Thalassa47
Copy link
Author

Thalassa47 commented Dec 24, 2020 via email

@burnacid
Copy link
Owner

Ik moet even met athom contact gaan opnemen wat het maakt niet uit welke versie ik wil meegeven om de een of andere reden komt dit altijd terug als al gebruikt

E:\Workspace\com.burnacid.ztatz>homey app publish
✓ Pre-processing app...
✓ Validating app...
✓ Homey App validated successfully against level `publish`
? Do you want to update your app's version number? (current v0.4.0) No
✓ Submitting [email protected]...
[email protected] uses a version number of a build that has been used before. Increase the version of your app.

burnacid added a commit that referenced this issue Dec 24, 2020
@burnacid
Copy link
Owner

Published to test. Zou je eens willen testen of dit voor jou werkt?

https://homey.app/nl-nl/app/com.burnacid.ztatz/ZTATZ/test/

Via deze link moet je hem kunnen updaten / installeren

@burnacid burnacid linked a pull request Dec 24, 2020 that will close this issue
@Thalassa47
Copy link
Author

Thalassa47 commented Dec 24, 2020 via email

@burnacid
Copy link
Owner

Wat bedoel je met geen data, heb je een printscreen wellicht voor me?
Tevens aub de output van de api link: http://{yourztatzurl}/api/v1/indoor/temperature?json=object&limit=1

Thx

@Thalassa47
Copy link
Author

Thalassa47 commented Dec 24, 2020 via email

@burnacid
Copy link
Owner

Ah dat verklaart

@burnacid
Copy link
Owner

Versie 0.4.1 gepublished naar test: https://homey.app/a/com.burnacid.ztatz/test/
Kan je nogmaals proberen?

@burnacid burnacid linked a pull request Dec 24, 2020 that will close this issue
burnacid added a commit that referenced this issue Dec 24, 2020
#23 Fixed API named tags & remove homey energy
@Thalassa47
Copy link
Author

Thalassa47 commented Dec 24, 2020 via email

@burnacid
Copy link
Owner

Version 0.4.1 is released

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
enhancement New feature or request Released
Projects
None yet
2 participants