[Keyboard] add 1upkeyboards 1upslider8 (qmk#21546)

Co-authored-by: Duncan Sutherland <[email protected]>
Co-authored-by: jack <[email protected]>
Co-authored-by: Drashna Jaelre <[email protected]>

keyboards/1upkeyboards/1upslider8/config.h

@@ -0,0 +1,29 @@
+/* Copyright 2023 Ziptyze
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define I2C1_SCL_PIN        GP11
+#define I2C1_SDA_PIN        GP10
+#define OLED_BRIGHTNESS 128
+
+#define SLIDER_PIN GP28
+#define MIDI_ADVANCED
+
+#define RGB_MATRIX_LED_COUNT 8
+#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS

keyboards/1upkeyboards/1upslider8/halconf.h

@@ -0,0 +1,9 @@
+// Copyright 2023 ziptyze
+// SPDX-License-Identifier: GPL-2.0-or-later#pragma once
+
+#pragma once
+
+#define HAL_USE_I2C TRUE
+#define HAL_USE_ADC TRUE
+
+#include_next <halconf.h>

keyboards/1upkeyboards/1upslider8/info.json

@@ -0,0 +1,115 @@
+{
+    "manufacturer": "1upkeyboards",
+    "keyboard_name": "1upslider8",
+    "maintainer": "ziptyze",
+    "processor": "RP2040",
+    "bootloader": "rp2040",
+    "usb": {
+        "device_version": "1.0.0",
+        "pid": "0x5611",
+        "vid": "0x6F75"
+    },
+    "dynamic_keymap": {
+        "layer_count": 10
+    },
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": false,
+        "oled": true,
+        "midi":true,
+        "rgb_matrix": true,
+        "encoder": true
+    },
+    "encoder": {
+        "rotary": [
+            {
+                "pin_a": "GP21",
+                "pin_b": "GP22"
+            }
+        ]
+    },
+    "matrix_pins": {
+        "direct": [
+            ["GP27", "GP17", "GP18", "GP19", "GP20", "GP15", "GP14", "GP13", "GP16"]
+        ]
+    },
+    "bootmagic": {
+        "matrix": [0, 1]
+    },
+    "ws2812": {
+        "pin": "GP26",
+        "driver": "vendor"
+    },
+    "rgb_matrix": {
+        "animations": {
+            "gradient_up_down": true,
+            "gradient_left_right": true,
+            "breathing": true,
+            "band_sat": true,
+            "band_val": true,
+            "band_pinwheel_sat": true,
+            "band_pinwheel_val": true,
+            "band_spiral_sat": true,
+            "band_spiral_val": true,
+            "cycle_all": true,
+            "cycle_left_right": true,
+            "cycle_up_down": true,
+            "rainbow_moving_chevron":true,
+            "cycle_out_in": true,
+            "cycle_out_in_dual": true,
+            "cycle_pinwheel": true,
+            "cycle_spiral": true,
+            "dual_beacon": true,
+            "rainbow_beacon": true,
+            "rainbow_pinwheels": true,
+            "raindrops": true,
+            "jellybean_raindrops": true,
+	        "hue_breathing": true,
+            "hue_pendulum": true,
+            "hue_wave": true,
+            "typing_heatmap": true,
+            "solid_reactive_simple": true,
+	        "solid_reactive": true,
+            "solid_reactive_wide": true,
+            "solid_reactive_multiwide": true,
+            "solid_reactive_cross": true,
+            "solid_reactive_multicross": true,
+            "solid_reactive_nexus": true,
+            "solid_reactive_multinexus": true,
+            "splash": true,
+            "multisplash": true,
+            "solid_splash": true,
+            "solid_multisplash": true
+        },
+        "driver": "ws2812",
+        "layout": [
+            { "flags": 4, "matrix": [0, 1], "x": 28, "y": 16 },
+            { "flags": 4, "matrix": [0, 2], "x": 84, "y": 16 },
+            { "flags": 4, "matrix": [0, 3], "x": 140, "y": 16 },
+            { "flags": 4, "matrix": [0, 4], "x": 196, "y": 16 },
+            { "flags": 4, "matrix": [0, 5], "x": 28, "y": 48 },
+            { "flags": 4, "matrix": [0, 6], "x": 84, "y": 48 },
+            { "flags": 4, "matrix": [0, 7], "x": 140, "y": 48 },
+            { "flags": 4, "matrix": [0, 8], "x": 196, "y": 48 }
+        ]
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                { "label": "enc", "matrix": [0, 0], "x": 3, "y": 0 },
+                { "label": "1", "matrix": [0, 1], "x": 0, "y": 1 },
+                { "label": "2", "matrix": [0, 2], "x": 1, "y": 1 },
+                { "label": "3", "matrix": [0, 3], "x": 2, "y": 1 },
+                { "label": "4", "matrix": [0, 4], "x": 3, "y": 1 },
+                { "label": "5", "matrix": [0, 5], "x": 0, "y": 2 },
+                { "label": "6", "matrix": [0, 6], "x": 1, "y": 2 },
+                { "label": "7", "matrix": [0, 7], "x": 2, "y": 2 },
+                { "label": "8", "matrix": [0, 8], "x": 3, "y": 2 }
+            ]
+        }
+    }
+}

keyboards/1upkeyboards/1upslider8/keymaps/default/keymap.c

@@ -0,0 +1,31 @@
+/* Copyright 2022 ziptyze
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+                                   RGB_TOG,
+        KC_1,     KC_2,     KC_3,     KC_4,
+        KC_5,     KC_6,     KC_7,     KC_8
+    )
+};
+
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [0] =  { ENCODER_CCW_CW(RGB_RMOD,  RGB_MOD)}
+};
+#endif

keyboards/1upkeyboards/1upslider8/keymaps/default/rules.mk

@@ -0,0 +1 @@
+ENCODER_MAP_ENABLE = yes

keyboards/1upkeyboards/1upslider8/keymaps/via/keymap.c

@@ -0,0 +1,31 @@
+/* Copyright 2023 ziptyze
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+                                   RGB_TOG,
+        KC_1,     KC_2,     KC_3,     KC_4,
+        KC_5,     KC_6,     KC_7,     KC_8
+    )
+};
+
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [0] =  { ENCODER_CCW_CW(RGB_RMOD,  RGB_MOD)}
+};
+#endif

keyboards/1upkeyboards/1upslider8/keymaps/via/rules.mk

@@ -0,0 +1,3 @@
+VIA_ENABLE = yes
+
+ENCODER_MAP_ENABLE = yes

keyboards/1upkeyboards/1upslider8/mcuconf.h

@@ -0,0 +1,11 @@
+// Copyright 2023 ziptyze
+// SPDX-License-Identifier: GPL-2.0-or-later#pragma once
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef RP_I2C_USE_I2C1
+#undef RP_ADC_USE_ADC1
+#define RP_I2C_USE_I2C1 TRUE
+#define RP_ADC_USE_ADC1 TRUE

keyboards/1upkeyboards/1upslider8/readme.md

@@ -0,0 +1,27 @@
+# slider8
+
+![slider8](https://i.imgur.com/AiVQySnh.jpg)
+
+
+This keyboard is the slider8 from 1upkeyboards.com, a small macropad with an oled, slide potentiometer, rotary encoder, and 8 switches in a 2x4 ortholinear arrangement with per-key in-switch rgb leds.
+
+The slide potentiometer presents to the computer as a midi device and will need a seperate program to map to device control.
+
+* Keyboard Maintainer: [ziptyze](https://github.com/ziptyze)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 1upkeyboards/1upslider8:default
+
+Flashing example for this keyboard:
+
+    make 1upkeyboards/1upslider8:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 2 ways:
+
+* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
+* **Physical reset button**: Hold down the button on the pi pico and plug in the keyboard

keyboards/1upkeyboards/1upslider8/rules.mk

@@ -0,0 +1 @@
+SRC += analog.c