CI: Ensure only supported configure options are used (--enable-option-checking=fatal) #2662
Workflow file for this run
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # | |
| # build.yml - GitHub build action for AVRDUDE | |
| # Copyright (C) 2021 Marius Greuel | |
| # | |
| # This program is free software; you can redistribute it and/or modify | |
| # it under the terms of the GNU General Public License as published by | |
| # the Free Software Foundation; either version 2 of the License, or | |
| # (at your option) any later version. | |
| # | |
| # This program is distributed in the hope that it will be useful, | |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| # GNU General Public License for more details. | |
| # | |
| # You should have received a copy of the GNU General Public License | |
| # along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| # | |
| name: Build | |
| on: | |
| push: | |
| branches-ignore: | |
| - 'onlinedocs' | |
| pull_request: | |
| branches-ignore: | |
| - 'onlinedocs' | |
| workflow_call: | |
| env: | |
| BUILD_TYPE: RelWithDebInfo | |
| jobs: | |
| linux-x86_64-autotools: | |
| runs-on: ubuntu-latest | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Install prerequisites | |
| run: >- | |
| sudo apt-get update | |
| sudo apt-get install -y | |
| build-essential | |
| automake | |
| libtool | |
| flex | |
| bison | |
| libelf-dev | |
| libusb-dev | |
| libusb-1.0-0-dev | |
| libhidapi-dev | |
| libftdi1-dev | |
| libreadline-dev | |
| libserialport-dev | |
| libgpiod-dev | |
| texinfo | |
| texlive | |
| texi2html | |
| - name: Configure | |
| run: >- | |
| autoreconf -vis src | |
| mkdir _ambuild && cd _ambuild | |
| ../src/configure | |
| --enable-option-checking=fatal | |
| --enable-doc | |
| --enable-parport | |
| --enable-linuxgpio | |
| --enable-linuxspi | |
| - name: Build | |
| run: make -C _ambuild -j$(nproc) | |
| - name: "avrdude -? (not installed)" | |
| run: _ambuild/avrdude -? | |
| - name: "Dryrun test (not installed)" | |
| run: printf "\n\n" | ./tools/test-avrdude -v -e _ambuild/avrdude -c '-C _ambuild/avrdude.conf' -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| - name: Install | |
| run: sudo make -C _ambuild install | |
| - name: "Dryrun test (installed)" | |
| run: >- | |
| export LD_LIBRARY_PATH="/usr/local/lib"; | |
| printf "\n\n" | ./tools/test-avrdude -v -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| # Re-enable distcheck after the doc fixes | |
| # - name: distcheck | |
| # run: make -C _ambuild -j$(nproc) distcheck "DISTCHECK_CONFIGURE_FLAGS=--disable-doc" | |
| linux-x86_64: | |
| runs-on: ubuntu-latest | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Install prerequisites | |
| run: >- | |
| sudo apt-get update | |
| sudo apt-get install -y | |
| build-essential | |
| cmake | |
| flex | |
| bison | |
| libelf-dev | |
| libusb-dev | |
| libusb-1.0-0-dev | |
| libhidapi-dev | |
| libftdi1-dev | |
| libreadline-dev | |
| libserialport-dev | |
| libgpiod-dev | |
| texinfo | |
| texlive | |
| texi2html | |
| - name: Configure | |
| run: >- | |
| cmake | |
| -D BUILD_DOC=1 | |
| -D DEBUG_CMAKE=1 | |
| -D HAVE_PARPORT=1 | |
| -D HAVE_LINUXGPIO=1 | |
| -D HAVE_LINUXSPI=1 | |
| -D CMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} | |
| -B build | |
| - name: Build | |
| run: cmake --build build | |
| - name: "avrdude -? (not installed)" | |
| run: build/src/avrdude -? | |
| - name: "Dryrun test (not installed)" | |
| run: printf "\n\n" | ./tools/test-avrdude -v -e build/src/avrdude -c '-C build/src/avrdude.conf' -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| - name: Install | |
| run: sudo cmake --build build --target install | |
| - name: "Dryrun test (installed)" | |
| run: printf "\n\n" | ./tools/test-avrdude -v -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| - name: Archive build artifacts | |
| if: always() | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: build-linux-x86_64 | |
| path: | | |
| build/ | |
| !**/*.d | |
| !**/*.o | |
| - name: Archive executables | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: avrdude-linux-x86_64 | |
| path: | | |
| build/src/avrdude | |
| build/src/avrdude.conf | |
| linux: | |
| runs-on: ubuntu-latest | |
| container: debian:11 | |
| strategy: | |
| matrix: | |
| include: | |
| - { arch: i386, processor: i686, prefix: i686-linux-gnu, inc-lib: i386-linux-gnu } | |
| - { arch: armhf, processor: armhf, prefix: arm-linux-gnueabihf, inc-lib: arm-linux-gnueabihf } | |
| - { arch: arm64, processor: aarch64, prefix: aarch64-linux-gnu, inc-lib: aarch64-linux-gnu } | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Add architecture | |
| run: | | |
| dpkg --add-architecture ${{matrix.arch}} | |
| apt-get update | |
| - name: Install prerequisites | |
| run: >- | |
| apt-get update | |
| apt-get install -y | |
| git | |
| cmake | |
| flex | |
| bison | |
| crossbuild-essential-${{matrix.arch}} | |
| libelf-dev:${{matrix.arch}} | |
| libusb-dev:${{matrix.arch}} | |
| libusb-1.0-0-dev:${{matrix.arch}} | |
| libhidapi-dev:${{matrix.arch}} | |
| libftdi1-dev:${{matrix.arch}} | |
| libreadline-dev:${{matrix.arch}} | |
| libserialport-dev:${{matrix.arch}} | |
| libgpiod-dev:${{matrix.arch}} | |
| - name: Configure | |
| run: >- | |
| cmake | |
| -D DEBUG_CMAKE=1 | |
| -D HAVE_PARPORT=1 | |
| -D HAVE_LINUXGPIO=1 | |
| -D HAVE_LINUXSPI=1 | |
| -D CMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} | |
| -D CMAKE_SYSTEM_NAME=Linux | |
| -D CMAKE_SYSTEM_PROCESSOR=${{matrix.processor}} | |
| -D CMAKE_C_COMPILER=${{matrix.prefix}}-gcc | |
| -D CMAKE_FIND_ROOT_PATH=/usr/${{matrix.prefix}} | |
| -D CMAKE_INCLUDE_PATH=/usr/include/${{matrix.inc-lib}} | |
| -D CMAKE_LIBRARY_PATH=/usr/lib/${{matrix.inc-lib}} | |
| -B build | |
| - name: Build | |
| run: cmake --build build | |
| - name: "avrdude -? (not installed)" | |
| if: matrix.arch == 'i386' | |
| run: build/src/avrdude -? | |
| - name: Archive build artifacts | |
| if: always() | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: build-linux-${{matrix.processor}} | |
| path: | | |
| build/ | |
| !**/*.d | |
| !**/*.o | |
| - name: Archive executables | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: avrdude-linux-${{matrix.processor}} | |
| path: | | |
| build/src/avrdude | |
| build/src/avrdude.conf | |
| macos-x86_64: | |
| runs-on: macos-latest | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Print original PATH | |
| run: | | |
| echo "PATH=$PATH" | |
| type flex | |
| type bison | |
| # - name: Configure environment to use brew kegs for flex and bison | |
| # run: | | |
| # echo "PATH=/opt/homebrew/opt/flex/bin:/opt/homebrew/opt/bison/bin:$PATH" >> $GITHUB_ENV | |
| - name: Install prerequisites | |
| run: >- | |
| brew unlink pkg-config | |
| # brew update` | |
| brew install | |
| cmake | |
| flex | |
| bison | |
| libelf | |
| libusb | |
| libusb-compat | |
| hidapi | |
| libftdi | |
| readline | |
| libserialport | |
| pkgconf | |
| brew link | |
| pkgconf | |
| - name: Print PATH after brew install | |
| run: | | |
| echo "PATH=$PATH" | |
| for b in bison flex pkg-config; do type "$b"; done | |
| - name: Configure | |
| run: >- | |
| cmake | |
| -D CMAKE_C_FLAGS=-I/opt/homebrew/include | |
| -D CMAKE_EXE_LINKER_FLAGS=-L/opt/homebrew/Cellar | |
| -D DEBUG_CMAKE=1 | |
| -D CMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} | |
| -B build | |
| - name: Build | |
| run: cmake --build build | |
| - name: "avrdude -? (not installed)" | |
| run: build/src/avrdude -? | |
| - name: "Dryrun test (not installed)" | |
| run: printf "\n\n" | ./tools/test-avrdude -v -e build/src/avrdude -c '-C build/src/avrdude.conf' -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| - name: Archive build artifacts | |
| if: always() | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: build-macos-x86_64 | |
| path: | | |
| build/ | |
| !**/*.d | |
| !**/*.o | |
| - name: Archive executables | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: avrdude-macos-x86_64 | |
| path: | | |
| build/src/avrdude | |
| build/src/avrdude.conf | |
| macos-x86_64-autotools: | |
| runs-on: macos-latest | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Install prerequisites | |
| run: >- | |
| brew unlink pkg-config | |
| # brew update | |
| brew install | |
| automake | |
| autoconf | |
| libtool | |
| gettext | |
| flex | |
| bison | |
| libelf | |
| libusb | |
| hidapi | |
| libftdi | |
| readline | |
| libserialport | |
| pkgconf | |
| brew link | |
| pkgconf | |
| - name: Print PATH | |
| run: | | |
| echo "PATH=$PATH" | |
| for b in bison flex pkg-config; do type "$b"; done | |
| - name: Configure | |
| run: >- | |
| ./src/bootstrap | |
| mkdir _ambuild && cd _ambuild | |
| CFLAGS="-I/opt/homebrew/include" LDFLAGS="-L/opt/homebrew/lib" ../src/configure --enable-option-checking=fatal | |
| - name: Build | |
| run: make -C _ambuild -j$(nproc) | |
| - name: "avrdude -? (not installed)" | |
| run: _ambuild/avrdude -? | |
| - name: "Dryrun test (not installed)" | |
| run: printf "\n\n" | ./tools/test-avrdude -v -e _ambuild/avrdude -c '-C _ambuild/avrdude.conf' -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| msvc: | |
| runs-on: windows-latest | |
| strategy: | |
| matrix: | |
| include: | |
| - { arch: x86, platform: Win32 } | |
| - { arch: x64, platform: x64 } | |
| - { arch: arm64, platform: ARM64 } | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Install prerequisites | |
| # As Chocolatey is notoriously unreliable, install winflexbison3 directly from GitHub. | |
| # run: choco install winflexbison3 | |
| run: | | |
| curl https://github.com/lexxmark/winflexbison/releases/download/v2.5.24/win_flex_bison-2.5.24.zip --location --output winflexbison.zip | |
| unzip winflexbison.zip -d ${{github.workspace}}\winflexbison | |
| echo "${{github.workspace}}\winflexbison" | Out-File -FilePath $env:GITHUB_PATH -Encoding utf8 -Append | |
| - name: Configure | |
| run: >- | |
| cmake | |
| -A ${{matrix.platform}} | |
| -D DEBUG_CMAKE=1 | |
| -D CMAKE_SYSTEM_VERSION=11 | |
| -D CMAKE_C_FLAGS_RELWITHDEBINFO="/MT /GL /Zi /O2 /Ob1 /DNDEBUG" | |
| -D CMAKE_CXX_FLAGS_RELWITHDEBINFO="/MT /GL /Zi /O2 /Ob1 /DNDEBUG" | |
| -D CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO="/DEBUG /INCREMENTAL:NO /LTCG /OPT:REF /OPT:ICF" | |
| -D HAVE_LIBREADLINE=HAVE_LIBREADLINE-NOTFOUND | |
| -D USE_EXTERNAL_LIBS=1 | |
| -B build | |
| - name: Build | |
| run: cmake --build build --config ${{env.BUILD_TYPE}} | |
| - name: "avrdude -? (not installed)" | |
| # FIXME: Skip running avrdude. | |
| # The exe file on arm64 is not runnable - x86_64 perhaps? | |
| if: matrix.arch != 'arm64' | |
| run: build/src/${{env.BUILD_TYPE}}/avrdude.exe -? | |
| - name: "Dryrun test (not installed)" | |
| # FIXME: Skip running avrdude. | |
| # The exe file on arm64 is not runnable - x86_64 perhaps? | |
| if: matrix.arch != 'arm64' | |
| run: | | |
| $tmp = [System.IO.Path]::GetTempPath() | |
| $tmp_slash = $tmp -replace '\\', '/' | |
| Write-Host "`n`n" -NoNewline | bash tools/test-avrdude -v -t "$tmp_slash" -e build/src/${{env.BUILD_TYPE}}/avrdude.exe -c "-C build/src/avrdude.conf" -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| - name: Archive build artifacts | |
| if: always() | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: build-msvc-${{matrix.arch}} | |
| path: | | |
| build/ | |
| !**/_deps/ | |
| !**/*.obj | |
| - name: Move executables | |
| run: | | |
| mv build/src/${{env.BUILD_TYPE}}/avrdude.exe build/src | |
| mv build/src/${{env.BUILD_TYPE}}/avrdude.pdb build/src | |
| - name: Archive executables | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: avrdude-msvc-${{matrix.arch}} | |
| path: | | |
| build/src/avrdude.exe | |
| build/src/avrdude.pdb | |
| build/src/avrdude.conf | |
| mingw: | |
| runs-on: windows-latest | |
| defaults: | |
| run: | |
| shell: msys2 {0} | |
| strategy: | |
| matrix: | |
| include: | |
| - { sys: mingw64, env: x86_64 } | |
| - { sys: ucrt64, env: ucrt-x86_64 } | |
| - { sys: clang64, env: clang-x86_64 } | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - uses: msys2/setup-msys2@v2 | |
| with: | |
| msystem: ${{matrix.sys}} | |
| update: true | |
| install: >- | |
| base-devel | |
| mingw-w64-${{matrix.env}}-gcc | |
| mingw-w64-${{matrix.env}}-cmake | |
| mingw-w64-${{matrix.env}}-python | |
| mingw-w64-${{matrix.env}}-swig | |
| mingw-w64-${{matrix.env}}-libelf | |
| mingw-w64-${{matrix.env}}-libusb | |
| mingw-w64-${{matrix.env}}-libusb-compat-git | |
| mingw-w64-${{matrix.env}}-hidapi | |
| mingw-w64-${{matrix.env}}-libftdi | |
| mingw-w64-${{matrix.env}}-libserialport | |
| mingw-w64-${{matrix.env}}-readline | |
| mingw-w64-${{matrix.env}}-ncurses | |
| mingw-w64-${{matrix.env}}-termcap | |
| - name: Configure | |
| run: >- | |
| cmake | |
| -G"MSYS Makefiles" | |
| -D DEBUG_CMAKE=1 | |
| -D CMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} | |
| -B build | |
| - name: Build | |
| run: cmake --build build | |
| - name: "avrdude -? (not installed)" | |
| run: build/src/avrdude -? | |
| # Disabled so far due to problems writing to temp files. | |
| # - name: "Dryrun test (not installed)" | |
| # run: printf "\n\n" | ./tools/test-avrdude -v -e build/src/avrdude.exe -c "-C build/src/avrdude.conf" -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| - name: Archive build artifacts | |
| if: always() | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: build-mingw-${{matrix.env}} | |
| path: | | |
| build/ | |
| - name: Archive executables | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: avrdude-mingw-${{matrix.env}} | |
| path: | | |
| build/src/avrdude.exe | |
| build/src/avrdude.conf |