Everything is installed and running, but clone hero does not detect the input

[rhalick]

I used the old guitar sniffer about 7 months ago and it worked fine on my rock band 4 guitar, and i wanted to get back into it today so i installed the new guitar sniffer and everything else. I set up vjoy and followed all the instructions yet clonehero isn't detecting any input from my guitar

[Dunkalunk]

Hey any luck with this?

Once you have vJoy all set up you should plug in your XB1 wireless adapter, turn the guitar controller on and make sure it's connected, then start the guitarsniffer.exe file you downloaded. Press some buttons to make sure they highlight in the program.

If that's all working, go into Clone Hero and hit spacebar to open the controls. Set the controller to be the vJoy controller you set up, then map all the buttons.

Hope this helps!

[rhalick]

The buttons on guitarsniffer do light up when I press buttons on my guitar, and I've got the vjoy as my controller in clone hero but it doesnt work. I tried using the old guitar sniffer and keyboard input method and that worked so I'm not sure why it doesnt

…

On Fri, Sep 27, 2019, 4:28 PM Jon ***@***.***> wrote: Hey any luck with this? Once you have vJoy all set up you should plug in your XB1 wireless adapter, turn the guitar controller on and make sure it's connected, then start the guitarsniffer.exe file you downloaded. Press some buttons to make sure they highlight in the program. If that's all working, go into Clone Hero and hit spacebar to open the controls. Set the controller to be the vJoy controller you set up, then map all the buttons. Hope this helps! — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#6?email_source=notifications&email_token=ANIITXYACEATIB3YHQYZP6DQLZ3HJA5CNFSM4IY4SNL2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD72EKZQ#issuecomment-536102246>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ANIITX35M2TVLK5WHQJZU5TQLZ3HJANCNFSM4IY4SNLQ> .

[artman41]

@rhalick if the application is lighting up then it's an issue either with your vJoy install or vJoy configuration

can you send a picture of your vJoy conf?

[rhalick]

I set it up the same way as in the image, I'll send a picture of it when i get home

…

On Fri, Sep 27, 2019, 6:35 PM Tyler Hughes ***@***.***> wrote: @rhalick <https://github.com/rhalick> if the application is lighting up then it's an issue either with your vJoy install or vJoy configuration can you send a picture of your vJoy conf? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#6?email_source=notifications&email_token=ANIITX25T6W3OLCUG7KRON3QL2KEXA5CNFSM4IY4SNL2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD72KPBY#issuecomment-536127367>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ANIITXZHNGLPEBP7QRSVYTLQL2KEXANCNFSM4IY4SNLQ> .

[rhalick]

sorry for the late response, but this is my vjoy config

[artman41]

@rhalick, I notice that your vJoy version is v2.1.9, what is your OS?

[rhalick]

I'm on the latest version of windows 10

…

On Mon, Oct 7, 2019, 1:35 PM Tyler Hughes ***@***.***> wrote: @rhalick <https://github.com/rhalick>, I notice that your vJoy version is v2.1.9, what is your OS? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#6?email_source=notifications&email_token=ANIITX2H43FQ2SXRQJ5Q5TLQNN6PNA5CNFSM4IY4SNL2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEARLU6Q#issuecomment-539146874>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ANIITX2VENLQSCVIV2DDH6DQNN6PNANCNFSM4IY4SNLQ> .

[krpotter]

Reviving this issue, as I appear to have somewhat the same issue. Using a USB/Wireless Xbox Game adapter (the older fat adapter, not the newer slim or rounded one), to an Xbox One Rock Band 4 StratoCaster guitar. Guitar works just fine with the older FenderStratocasterSniffer program, but ONLY with version 3.0 of that program (won't work with 4.0). When attempting to use v4.0, the GuitarSnifferWrapper 4.0 GUI app shows no keys being pressed when using the guitar.

So, tried using this newer version GuitarSniffer program, but I get absolutely no input at all showing up in the GuitarSniffer GUI (v1.1). I've installed WinPCap 4.1.3, USBPcap 1.2.0.4, and vJoy 2.1.9.1 (Windows 10 specific version, since I'm on Windows 10). I've setup Controller 1 in vJoy EXACTLY like is indicated above and in the instructions. Unfortunately, GuitarSniffer GUI just does not show any keys when pressed. When GuitarSniffer is started, using the vJoy Monitor, it shows the GuitarSniffer Process ID attaching to vJoy controller 1, but no keys show as active in GuitarSniffer.

Again, it works with the old FenderStratoCasterSniffer progra (using same WinPCap 4.1.3, USBPcap 1.2.0.4), so it certainly indicates packets are making it from the guitar, through the adapter, to the PC. Just the newer software doesn't see it.

Any ideas or suggestions? I'm happy to debug as needed.
Thanks!

[ghost]

Reviving this issue, as I appear to have somewhat the same issue. Using a USB/Wireless Xbox Game adapter (the older fat adapter, not the newer slim or rounded one), to an Xbox One Rock Band 4 StratoCaster guitar. Guitar works just fine with the older FenderStratocasterSniffer program, but ONLY with version 3.0 of that program (won't work with 4.0). When attempting to use v4.0, the GuitarSnifferWrapper 4.0 GUI app shows no keys being pressed when using the guitar.

So, tried using this newer version GuitarSniffer program, but I get absolutely no input at all showing up in the GuitarSniffer GUI (v1.1). I've installed WinPCap 4.1.3, USBPcap 1.2.0.4, and vJoy 2.1.9.1 (Windows 10 specific version, since I'm on Windows 10). I've setup Controller 1 in vJoy EXACTLY like is indicated above and in the instructions. Unfortunately, GuitarSniffer GUI just does not show any keys when pressed. When GuitarSniffer is started, using the vJoy Monitor, it shows the GuitarSniffer Process ID attaching to vJoy controller 1, but no keys show as active in GuitarSniffer.

Again, it works with the old FenderStratoCasterSniffer progra (using same WinPCap 4.1.3, USBPcap 1.2.0.4), so it certainly indicates packets are making it from the guitar, through the adapter, to the PC. Just the newer software doesn't see it.

Any ideas or suggestions? I'm happy to debug as needed.
Thanks!

Exact same issue here.

[BogWater]

I was having this issue but rebinding the color keys and strum bar in the control options seems to have fixed it.