AVD Arista Validated Design for Arista Test Drive

About

This repository is configured to run arista.cvp & arista.avd Ansible collections against the Arista Test Drive (ATD) single data center topology.

To access an ATD topology, please get in touch with your Arista representative.

Lab topology

The diagram below shows that the ATD lab topology has two data centers. We will only leverage DC1 in this example.

ATD topology device list

Device	IP Address
s1-spine1	192.168.0.10
s1-spine2	192.168.0.11
s1-leaf1	192.168.0.12
s1-leaf2	192.168.0.13
s1-leaf3	192.168.0.14
s1-leaf4	192.168.0.15
s1-host1	192.168.0.16
s1-host2	192.168.0.17

Current repository is built with cEOS management interface (Management0). If you run a vEOS topology, please update mgmt_interface field to Management1 in the ATD_LAB group_vars.

Getting Started

Connect to your ATD lab environment

• Don't hesitate to contact your local account team if you need an ATD Lab instance.
• Once connected to the ATD lab instance, select the Programmability IDE.
• This container is built with all the requirements and Python modules to run AVD playbooks.

1. Next (optional), set up a Git user and email for the ATD lab environment

   • Open a terminal window in VS Code View -> Terminal from the menu, and run the following commands:

   # Setup your git global config (optional)
   git config --global user.email "[email protected]"
   git config --global user.name "Your Name"

2. Set credentials and install any required tools

   ⚠️ Warning: Specific for the ATD environment. the pip config lines disable PIP safety checks and should not be used outside of ATD without understanding them.

   cd /home/coder/project/labfiles
   export LABPASSPHRASE=`cat /home/coder/.config/code-server/config.yaml| grep "password:" | awk '{print $2}'`
   ansible-galaxy collection install arista.avd:==4.10.2
   pip3 config set global.break-system-packages true
   pip3 config set global.disable-pip-version-check true
   pip install "pyavd[ansible]==4.10.2"
   git clone https://github.com/arista-netdevops-community/atd-avd.git
   cd atd-avd

3. Run the playbook to prepare CloudVision for AVD

   • Execute the following command:

     ansible-playbook playbooks/atd-prepare-lab.yml

   • Check that tasks in CloudVision have been automatically completed

4. Run playbook to deploy AVD setup

   • Run the following commands:

     ansible-playbook playbooks/atd-fabric-build.yml
     ansible-playbook playbooks/atd-fabric-provision.yml

   • Run pending tasks in CloudVision Portal manually.

5. Run validation and snapshot playbooks

   • Run the following commands:

     # Run audit playbook to validate the fabric state
     ansible-playbook playbooks/atd-validate-states.yml
     
     # Run the atd-snapshot playbook to collect show commands
     ansible-playbook playbooks/atd-snapshot.yml

   • Review generated output.

Step-by-step walkthrough

A complete step-by-step guide is available.

Resources

• Arista Ansible AVD Collection
• Arista CloudVision Collection
• Arista AVD documentation

License

This Project is published under Apache License.