ESP32 device hang / lagging with emulation enabled after upgrade to 14.0.0

[Mark-Muc]

PROBLEM DESCRIPTION

A clear and concise description of what the problem is.
I do hvbe some 32 Devices (in this case 2 Sonoff SwitchMan 2C) running on Tasmota 13.4.0(TasmoCompiler-esp32generic) without any problem.
If i update to 14.0.0.1 (selfe compiled) switches will be attached.
If i upgrade fist I have to update twice (1. time it will stay in safeboot, 2. update it works) ..after it shows up ist run quite a while (2-3 min) and then it lagged like hell.
I tried it several time in other ESP32 models . evertime the same.
I fount out, if i do someting on MQTT (disable; delete the server) it hangs asap.
I tried really @ least 10 times . everytime the same!

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!
compileswitches:

my config:

autoexec.bat 
Mi32Option6 1
MI32Page 10
MI32Block A4C138465A57
MI32Block E7764500F442
BLEAlias 150311116C66=LYWSD02-1 A4C138AF4A0B=Temp&Hum(LYWSD03MMC) E72E0050A0CC=1.OG_Bad A4C138465A57=Pavillion_innen A4C1382D29C3=1.OG_Arbeit_2 A4C1389C4D2A=Thermostat
shutteropen

also attached my config: can provide via mail!!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): _____
• Tasmota binary firmware version number used: _____
  • Pre-compiled
  • Self-compiled
• Flashing tools used: _____
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

  STATUS 0 output here:

09:26:17.464 CMD: status0
09:26:17.489 RSL: STATUS0 = {"Status":{"Module":0,"DeviceName":"Rollo 1. OG Arbeit 1 Ost","FriendlyName":["Rollo 1. OG Arbeit 1 Ost auf","Rollo 1. OG Arbeit 1 Ost zu","","","",""],"Topic":"Rollo_OG_Arbeit_1_Ost","ButtonTopic":"0","Power":"100000","PowerLock":"000000","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0},"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"https://ota.tasmota.com/tasmota32/release/tasmota32.bin","RestartReason":"Vbat power on reset","Uptime":"0T00:22:31","StartupUTC":"2024-05-23T07:03:46","Sleep":50,"CfgHolder":4617,"BootCount":10,"BCResetTime":"2023-02-27T13:35:34","SaveCount":28},"StatusFWR":{"Version":"14.0.0.1(TasmoCompiler-esp32generic)","BuildDateTime":"2024.05.23 06:50:08","Core":"3_0_0","SDK":"5.1.3.240430","CpuFrequency":160,"Hardware":"ESP32-D0WDQ6-V3 v3.0","CR":"528/699"},"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["Aichacher",""],"TelePeriod":300,"Resolution":"55C180C0","SetOption":["0000E001","2805C80001000600003C5A0A192800000000","40000088","00006000","00004002","00000000"]},"StatusMEM":{"ProgramSize":1524,"Free":1355,"Heap":49,"StackLowMark":3,"PsrMax":0,"PsrFree":0,"ProgramFlashSize":4096,"FlashSize":4096,"FlashChipId":"164054","FlashFrequency":40,"FlashMode":"DIO","Features":["0407","8F8047CB","00140001","00000007","00000000","C0000981","00000080","00200000","5400000C","40000080","00000004"],"Drivers":"1,!2,!3,4,!8,9,10,!12,20,!21,!24,26,27,29,!35,38,50,52,62,!68,79,!121","Sensors":"1,2,3,52,62,127"},"StatusNET":{"Hostname":"Rollo-1OG-Arbeit-1-OST","IPAddress":"192.168.11.96","Gateway":"192.168.11.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.11.1","DNSServer2":"0.0.0.0","Mac":"24:0A:C4:F8:F3:90","IP6Global":"","IP6Local":"fe80::260a:c4ff:fef8:f390%st1","Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0},"StatusTIM":{"UTC":"2024-05-23T07:26:17Z","Local":"2024-05-23T09:26:17","StartDST":"2024-03-31T02:00:00","EndDST":"2024-10-27T03:00:00","Timezone":99,"Sunrise":"05:24","Sunset":"20:55"},"StatusSNS":{"Time":"2024-05-23T09:26:17","Shutter1":{"Position":100,"Direction":0,"Target":100,"Tilt":0}},"StatusSTS":{"Time":"2024-05-23T09:26:17","Uptime":"0T00:22:31","UptimeSec":1351,"Heap":48,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":32},"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","POWER5":"OFF","POWER6":"ON","Dimmer":80,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"Aichacher","BSSId":"98:9B:CB:30:43:B9","Channel":6,"Mode":"HT40","RSSI":100,"Signal":-46,"LinkCount":3,"Downtime":"0T00:00:06"}},"StatusSHT":{"SHT0":{"Relay1":1,"Relay2":2,"Open":212,"Close":201,"50perc":53,"Delay":0,"Opt":"0100","Calib":[260,398,918,900,1000],"Mode":"1","TiltConfig":[0,0,0,0,0]}}}

- [ ] Set `weblog` to 4 and then, when you experience your issue, provide the output of the Console log:
```lua
  Console output here:
log looks normal:

0:00:01.000 WIF: verbinden mit AP1 xyz Channel 6 BSSId 98:9B:CB:30:43:B9 in Modus HT40 als Rollo-1OG-Arbeit-1-OST...
IMPROV����
00:00:03.596 WIF: verbunden
00:00:03.803 HTP: Webserver aktiv bei Rollo-1OG-Arbeit-1-OST mit IP-Adresse 192.168.11.96
00:00:03.807 UPP: Multicast (wieder-)verbunden
00:00:03.810 RSL: INFO1 = {"Info1":{"Module":"Sonoff SwitchMan 2C LED (button)","Version":"14.0.0.1(TasmoCompiler-esp32generic)","FallbackTopic":"cmnd/Rollo_OG_Arbeit_1_Ost_fb/","GroupTopic":"cmnd/tasmotas/"}}
00:00:03.840 RSL: INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"Rollo-1OG-Arbeit-1-OST","IPAddress":"192.168.11.96","IP6Global":"","IP6Local":"fe80::260a:c4ff:fef8:f390%st1"}}
00:00:03.859 RSL: INFO3 = {"Info3":{"RestartReason":"Vbat power on reset","BootCount":10}}
00:00:03.867 RSL: RESULT = {"POWER1":"OFF"}
00:00:03.868 RSL: POWER1 = OFF
00:00:03.870 RSL: RESULT = {"POWER2":"OFF"}
00:00:03.871 RSL: POWER2 = OFF
00:00:03.872 RSL: RESULT = {"POWER3":"OFF"}
00:00:03.883 RSL: POWER3 = OFF
00:00:03.884 RSL: RESULT = {"POWER4":"OFF"}
00:00:03.885 RSL: POWER4 = OFF
00:00:03.886 RSL: RESULT = {"POWER5":"OFF"}
00:00:03.898 RSL: POWER5 = OFF
00:00:03.899 RSL: RESULT = {"POWER6":"ON"}
00:00:03.900 RSL: POWER6 = ON
09:03:50.002 BLE: MasterEnable->1
09:03:50.031 RSL: RESULT = {"MI32Option6":1}
09:03:50.050 BLE: BLETask:Starting NimBLE
09:03:50.092 RSL: RESULT = {"MI32Page":10}
09:03:50.154 RSL: RESULT = {"MI32Block":{"A4C138465A57":1}}
09:03:50.214 RSL: RESULT = {"MI32Block":{"A4C138465A57":1,"E7764500F442":1}}
09:03:50.272 BLE: Add Alias mac 150311116C66 = name LYWSD02-1
09:03:50.273 BLE: Add Alias mac A4C138AF4A0B = name Temp&Hum(LYWSD03MMC)
09:03:50.273 BLE: Add Alias mac E72E0050A0CC = name 1.OG_Bad
09:03:50.285 BLE: Add Alias mac A4C138465A57 = name Pavillion_innen
09:03:50.286 BLE: Add Alias mac A4C1382D29C3 = name 1.OG_Arbeit_2
09:03:50.297 BLE: Add Alias mac A4C1389C4D2A = name Thermostat
09:03:50.300 RSL: RESULT = {"BLEAlias":{"150311116C66":"LYWSD02-1","A4C138AF4A0B":"Temp&Hum(LYWSD03MMC)","E72E0050A0CC":"1.OG_Bad","A4C138465A57":"Pavillion_innen","A4C1382D29C3":"1.OG_Arbeit_2","A4C1389C4D2A":"Thermostat"}}
09:03:50.377 RSL: RESULT = {"Shutter1":{"Position":100,"Direction":0,"Target":100,"Tilt":0}}
09:03:53.902 QPC: Reset
09:03:53.910 RSL: STATE = {"Time":"2024-05-23T09:03:53","Uptime":"0T00:00:07","UptimeSec":7,"Heap":61,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":32},"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","POWER5":"OFF","POWER6":"ON","Dimmer":80,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"Aichacher","BSSId":"98:9B:CB:30:43:B9","Channel":6,"Mode":"HT40","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:03"}}
09:03:53.957 RSL: SENSOR = {"Time":"2024-05-23T09:03:53","Shutter1":{"Position":100,"Direction":0,"Target":100,"Tilt":0}}
09:03:53.963 RSL: BLE = {"Time":"2024-05-23T09:03:53","BLEDevices":{"total":3,"F877B85FE13D":{"i":0,"r":-70},"001EC0779B33":{"i":1,"n":"D1703174","r":-81},"150311116C66":{"i":2,"r":-51,"a":"LYWSD02-1"}}}
09:03:53.993 RSL: BLE = {"Time":"2024-05-23T09:03:53","BLE":{"scans":0,"adverts":25,"devices":3,"resets":0}}
09:03:54.003 RSL: LYWSD02-1 = {"Time":"2024-05-23T09:03:54","alias":"LYWSD02-1","mac":"150311116c66","Temperature":23.8,"RSSI":-51,"TempUnit":"C"}
09:03:55.929 RSL: 1.OG_Bad = {"Time":"2024-05-23T09:03:55","alias":"1.OG_Bad","mac":"e72e0050a0cc","Battery":27,"RSSI":-92}
09:04:00.930 RSL: 1.OG_Arbeit_2 = {"Time":"2024-05-23T09:04:00","alias":"1.OG_Arbeit_2","mac":"a4c1382d29c3","Temperature":21.9,"Humidity":49.2,"DewPoint":10.7,"Btn":0,"Battery":84,"RSSI":-79,"TempUnit":"C"}
09:07:42.800 UPP: Multicast (wieder-)verbunden
09:08:47.904 RSL: LYWSD02-1 = {"Time":"2024-05-23T09:08:47","alias":"LYWSD02-1","mac":"150311116c66","Temperature":23.8,"Humidity":47.0,"DewPoint":11.8,"Battery":45,"RSSI":-57,"TempUnit":"C"}
09:08:48.904 RSL: 1.OG_Bad = {"Time":"2024-05-23T09:08:48","alias":"1.OG_Bad","mac":"e72e0050a0cc","Temperature":21.4,"Humidity":61.0,"DewPoint":13.6,"Battery":27,"RSSI":-95,"TempUnit":"C"}
09:08:49.904 RSL: 1.OG_Arbeit_2 = {"Time":"2024-05-23T09:08:49","alias":"1.OG_Arbeit_2","mac":"a4c1382d29c3","Temperature":21.9,"Humidity":49.1,"DewPoint":10.7,"Btn":0,"Battery":84,"RSSI":-79,"TempUnit":"C"}
09:08:53.905 RSL: STATE = {"Time":"2024-05-23T09:08:53","Uptime":"0T00:05:07","UptimeSec":307,"Heap":50,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":32},"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","POWER5":"OFF","POWER6":"ON","Dimmer":80,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"Aichacher","BSSId":"98:9B:CB:30:43:B9","Channel":6,"Mode":"HT40","RSSI":100,"Signal":-44,"LinkCount":2,"Downtime":"0T00:00:04"}}
09:08:53.956 RSL: SENSOR = {"Time":"2024-05-23T09:08:53","Shutter1":{"Position":100,"Direction":0,"Target":100,"Tilt":0}}
09:08:53.965 RSL: BLE = {"Time":"2024-05-23T09:08:53","BLEDevices":{"total":6,"F877B85FE13D":{"i":0,"r":-71},"001EC0779B33":{"i":1,"n":"D1703174","r":-81},"150311116C66":{"i":2,"r":-51,"a":"LYWSD02-1"},"E72E0050A0CC":{"i":3,"r":-95,"a":"1.OG_Bad"},"A4C1382D29C3":{"i":4,"r":-79,"a":"1.OG_Arbeit_2"},"E7764500F442":{"i":5,"r":-94}}}
09:08:53.998 RSL: BLE = {"Time":"2024-05-23T09:08:53","BLE":{"scans":15,"adverts":3302,"devices":6,"resets":0}}
09:13:47.922 RSL: LYWSD02-1 = {"Time":"2024-05-23T09:13:47","alias":"LYWSD02-1","mac":"150311116c66","Temperature":23.8,"Humidity":47.0,"DewPoint":11.8,"Battery":46,"RSSI":-51,"TempUnit":"C"}
09:13:48.923 RSL: 1.OG_Bad = {"Time":"2024-05-23T09:13:48","alias":"1.OG_Bad","mac":"e72e0050a0cc","Temperature":21.4,"Humidity":61.0,"DewPoint":13.6,"Battery":27,"RSSI":-91,"TempUnit":"C"}
09:13:49.923 RSL: 1.OG_Arbeit_2 = {"Time":"2024-05-23T09:13:49","alias":"1.OG_Arbeit_2","mac":"a4c1382d29c3","Temperature":21.9,"Humidity":49.0,"DewPoint":10.6,"Btn":0,"Battery":84,"RSSI":-81,"TempUnit":"C"}
09:13:53.924 RSL: STATE = {"Time":"2024-05-23T09:13:53","Uptime":"0T00:10:07","UptimeSec":607,"Heap":50,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":32},"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","POWER5":"OFF","POWER6":"ON","Dimmer":80,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"Aichacher","BSSId":"98:9B:CB:30:43:B9","Channel":6,"Mode":"HT40","RSSI":100,"Signal":-45,"LinkCount":2,"Downtime":"0T00:00:04"}}
09:13:53.974 RSL: SENSOR = {"Time":"2024-05-23T09:13:53","Shutter1":{"Position":100,"Direction":0,"Target":100,"Tilt":0}}
09:13:53.982 RSL: BLE = {"Time":"2024-05-23T09:13:53","BLEDevices":{"total":6,"F877B85FE13D":{"i":0,"r":-68},"001EC0779B33":{"i":1,"n":"D1703174","r":-88},"150311116C66":{"i":2,"r":-50,"a":"LYWSD02-1"},"E72E0050A0CC":{"i":3,"r":-91,"a":"1.OG_Bad"},"A4C1382D29C3":{"i":4,"r":-81,"a":"1.OG_Arbeit_2"},"E7764500F442":{"i":5,"r":-95}}}
09:13:54.015 RSL: BLE = {"Time":"2024-05-23T09:13:54","BLE":{"scans":30,"adverts":6755,"devices":6,"resets":0}}
09:17:43.801 UPP: Multicast (wieder-)verbunden
09:18:47.903 RSL: LYWSD02-1 = {"Time":"2024-05-23T09:18:47","alias":"LYWSD02-1","mac":"150311116c66","Temperature":23.8,"Humidity":47.0,"DewPoint":11.8,"Battery":46,"RSSI":-49,"TempUnit":"C"}
09:18:48.902 RSL: 1.OG_Bad = {"Time":"2024-05-23T09:18:48","alias":"1.OG_Bad","mac":"e72e0050a0cc","Temperature":21.4,"Humidity":61.0,"DewPoint":13.6,"Battery":27,"RSSI":-92,"TempUnit":"C"}
09:18:49.902 RSL: 1.OG_Arbeit_2 = {"Time":"2024-05-23T09:18:49","alias":"1.OG_Arbeit_2","mac":"a4c1382d29c3","Temperature":21.9,"Humidity":49.0,"DewPoint":10.7,"Btn":0,"Battery":84,"RSSI":-82,"TempUnit":"C"}
09:18:53.902 RSL: STATE = {"Time":"2024-05-23T09:18:53","Uptime":"0T00:15:07","UptimeSec":907,"Heap":50,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":32},"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","POWER5":"OFF","POWER6":"ON","Dimmer":80,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"Aichacher","BSSId":"98:9B:CB:30:43:B9","Channel":6,"Mode":"HT40","RSSI":100,"Signal":-44,"LinkCount":3,"Downtime":"0T00:00:06"}}
09:18:53.952 RSL: SENSOR = {"Time":"2024-05-23T09:18:53","Shutter1":{"Position":100,"Direction":0,"Target":100,"Tilt":0}}
09:18:53.960 RSL: BLE = {"Time":"2024-05-23T09:18:53","BLEDevices":{"total":6,"F877B85FE13D":{"i":0,"r":-70},"001EC0779B33":{"i":1,"n":"D1703174","r":-91},"150311116C66":{"i":2,"r":-57,"a":"LYWSD02-1"},"E72E0050A0CC":{"i":3,"r":-92,"a":"1.OG_Bad"},"A4C1382D29C3":{"i":4,"r":-82,"a":"1.OG_Arbeit_2"},"E7764500F442":{"i":5,"r":-95}}}
09:18:53.992 RSL: BLE = {"Time":"2024-05-23T09:18:53","BLE":{"scans":45,"adverts":10373,"devices":6,"resets":0}}

TO REPRODUCE

Steps to reproduce the behavior:

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

[mdk2412]

I can confirm that a Sonoff Dual R3 updated to release firmware 14.0.0 also seriously lagged on the web frontend. The huey bridge emulation did not work at all, Amazon echos could not reach the device anymore. I reverted back to 13.4.0 and everything was fine again. I do not make active use of any bluetooth functionality on that device.

[rschitz]

Sonoff Zigbee Pro 14.0.0.1(a9e7426-zbbrdgpro) reboot when i go to the /wi page
edit: 14.0.0(release-zbbrdgpro) is totally fine

[s-hadinger]

Please don't mix up problems. Lag is one, crash on a specific page is completely different
@rschitz open a new discussion with details

[s-hadinger]

Can you try Sleep 0. This is not the final solution but will eliminate some possible problems.

Sleep 0 prevents wifi from going in sleep mode and prevents lagging problems related to wifi

[Mark-Muc]

nothig changed on sleep 0

[s-hadinger]

Did you try rebooting your wifi Access Point?

[Mark-Muc]

sure i did...

…

________________________________ From: s-hadinger ***@***.***> Sent: Friday, May 24, 2024 6:57:14 PM To: arendst/Tasmota ***@***.***> Cc: Mark-Muc ***@***.***>; Author ***@***.***> Subject: Re: [arendst/Tasmota] ESP32 device hang / lagging like hell after upgrade to 14.0.0.1 dev (Issue #21470) Did you try rebooting your wifi Access Point? — Reply to this email directly, view it on GitHub<#21470 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AQCJXHYFCWTKCKDTTTWXEATZD5WOVAVCNFSM6AAAAABIFBQHNOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMRZHE4TMMBVHA>. You are receiving this because you authored the thread.Message ID: ***@***.***>

[ewanfletcher]

I had the same issue as the OP - Web interface was slow, and would stall completely - I ended up pulling the switch and flashing with an FTDI to get back to 13.4.0

Similar device - The Sonoff M5-1C-86

May have had a simialr issue with a couple of very early Sonoff Basics R1s - Haven't had time to retest yet

[arendst]

It is now fixed in v14.0.0.3