Merge pull request #5 from arendst/development

update fork

sonoff/_releasenotes.ino

@@ -5,6 +5,8 @@
  * Add additional time offset to Wifi Retry based on device mac address (#2089)
  * Add command Color6 RRGGBB for Clock hour marker color and command Rotation pixels for Clock rotation (#2092)
  * Add HTML language header in local language (#2123)
+ * Add command PowerDelta 0..100 (percentage) to Energy monitoring devices to report on active power load change (#2157)
+ * Add Restart Reason to Status 1 report (#2161)
  * Fix MAX31850 higher temperatures (#1269)
  *
  * 5.12.0d

sonoff/i18n.h

@@ -275,6 +275,7 @@
 // Commands xdrv_03_energy.ino
 #define D_CMND_POWERLOW "PowerLow"
 #define D_CMND_POWERHIGH "PowerHigh"
+#define D_CMND_POWERDELTA "PowerDelta"
 #define D_CMND_VOLTAGELOW "VoltageLow"
 #define D_CMND_VOLTAGEHIGH "VoltageHigh"
 #define D_CMND_CURRENTLOW "CurrentLow"
@@ -359,6 +360,7 @@ enum UnitNames {
   UNIT_MILLISECOND,
   UNIT_MINUTE,
   UNIT_PPM,
+  UNIT_PERCENTAGE,
   UNIT_PRESSURE,
   UNIT_SECOND,
   UNIT_SECTORS,
@@ -376,6 +378,7 @@ const char kUnitNames[] PROGMEM =
   D_UNIT_MILLISECOND "|"
   D_UNIT_MINUTE "|"
   D_UNIT_PARTS_PER_MILLION "|"
+  "%|"
   D_UNIT_PRESSURE "|"
   D_UNIT_SECOND "|"
   D_UNIT_SECTORS "|"

sonoff/language/hu-HU.h

@@ -59,7 +59,7 @@
 #define D_BOOT_COUNT "Bootolások száma"
 #define D_BRIGHTLIGHT "Max. fényerő"
 #define D_BUTTON "Gomb"
-#define D_BY "által"                    // Written by me
+#define D_BY "tőle:"                    // Written by me
 #define D_BYTES "Byte-ok"
 #define D_CELSIUS "Celsius"
 #define D_CO2 "Szén-dioxid"
@@ -71,7 +71,7 @@
 #define D_COUNTER "Számláló"
 #define D_CURRENT "Áram"          // As in Voltage and Current
 #define D_DATA "Adat"
-#define D_DARKLIGHT "Min. févnyerő"
+#define D_DARKLIGHT "Min. fényerő"
 #define D_DEBUG "Debug"
 #define D_DISABLED "Letiltva"
 #define D_DNS_SERVER "DNS Szerver"
@@ -210,7 +210,7 @@
 #define D_INFORMATION "Információ"
 #define D_FIRMWARE_UPGRADE "Firmware Frissítés"
 #define D_CONSOLE "Konzol"
-#define D_CONFIRM_RESTART "Újraindítés megerősítése"
+#define D_CONFIRM_RESTART "Újraindítás megerősítése"
 
 #define D_CONFIGURE_MODULE "Eszköz konfiguráció"
 #define D_CONFIGURE_WIFI "WiFi konfiguráció"
@@ -459,4 +459,4 @@
 #define D_LOG_UPNP "UPP: "         // UPnP
 #define D_LOG_WIFI "WIF: "         // Wifi
 
-#endif  // _LANGUAGE_EN_GB_H_
+#endif  // _LANGUAGE_HU_HU_H_

sonoff/settings.h

@@ -149,9 +149,7 @@ struct SYSCFG {
   uint8_t       ledstate;                  // 2FB
   uint8_t       param[PARAM8_SIZE];        // 2FC was domoticz_in_topic until 5.1.6
   char          state_text[4][11];         // 313
-
-  byte          free_33F[1];               // 33F
-
+  uint8_t       energy_power_delta;        // 33F
   uint16_t      domoticz_update_timer;     // 340
   uint16_t      pwm_range;                 // 342
 

sonoff/settings.ino

@@ -509,6 +509,7 @@ void SettingsDefaultSet2()
 //    Settings.domoticz_switch_idx[i] = 0;
   }
 
+  Settings.energy_power_delta = 80;
   Settings.energy_power_calibration = HLW_PREF_PULSE;
   Settings.energy_voltage_calibration = HLW_UREF_PULSE;
   Settings.energy_current_calibration = HLW_IREF_PULSE;
@@ -889,6 +890,7 @@ void SettingsDelta()
     }
     if (Settings.version < 0x050C0005) {
       Settings.light_rotation = 0;
+      Settings.energy_power_delta = 80;
       char fingerprint[60];
       memcpy(fingerprint, Settings.mqtt_fingerprint, sizeof(fingerprint));
       char *p = fingerprint;

sonoff/sonoff.h

@@ -71,11 +71,12 @@ typedef unsigned long power_t;              // Power (Relay) type
 //#define PWM_FREQ               910          // 100..1000 Hz led refresh (iTead value)
 #define PWM_FREQ               880          // 100..1000 Hz led refresh (BN-SZ01 value)
 
-#define MAX_POWER_HOLD         10           // Time in SECONDS to allow max agreed power (Pow)
-#define MAX_POWER_WINDOW       30           // Time in SECONDS to disable allow max agreed power (Pow)
-#define SAFE_POWER_HOLD        10           // Time in SECONDS to allow max unit safe power (Pow)
-#define SAFE_POWER_WINDOW      30           // Time in MINUTES to disable allow max unit safe power (Pow)
-#define MAX_POWER_RETRY        5            // Retry count allowing agreed power limit overflow (Pow)
+#define DEFAULT_POWER_DELTA    80           // Power change percentage
+#define MAX_POWER_HOLD         10           // Time in SECONDS to allow max agreed power
+#define MAX_POWER_WINDOW       30           // Time in SECONDS to disable allow max agreed power
+#define SAFE_POWER_HOLD        10           // Time in SECONDS to allow max unit safe power
+#define SAFE_POWER_WINDOW      30           // Time in MINUTES to disable allow max unit safe power
+#define MAX_POWER_RETRY        5            // Retry count allowing agreed power limit overflow
 
 #define STATES                 20           // State loops per second
 #define SYSLOG_TIMER           600          // Seconds to restore syslog_level

sonoff/sonoff.ino

@@ -1218,8 +1218,8 @@ void PublishStatus(uint8_t payload)
   }
 
   if ((0 == payload) || (1 == payload)) {
-    snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS1_PARAMETER "\":{\"" D_JSON_BAUDRATE "\":%d,\"" D_CMND_GROUPTOPIC "\":\"%s\",\"" D_CMND_OTAURL "\":\"%s\",\"" D_JSON_UPTIME "\":\"%s\",\"" D_JSON_STARTUPUTC "\":\"%s\",\"" D_CMND_SLEEP "\":%d,\"" D_JSON_BOOTCOUNT "\":%d,\"" D_JSON_SAVECOUNT "\":%d,\"" D_JSON_SAVEADDRESS "\":\"%X\"}}"),
-      baudrate, Settings.mqtt_grptopic, Settings.ota_url, GetDateAndTime(DT_UPTIME).c_str(), GetDateAndTime(DT_RESTART).c_str(), Settings.sleep, Settings.bootcount, Settings.save_flag, GetSettingsAddress());
+    snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS1_PARAMETER "\":{\"" D_JSON_BAUDRATE "\":%d,\"" D_CMND_GROUPTOPIC "\":\"%s\",\"" D_CMND_OTAURL "\":\"%s\",\"" D_JSON_RESTARTREASON "\":\"%s\",\"" D_JSON_UPTIME "\":\"%s\",\"" D_JSON_STARTUPUTC "\":\"%s\",\"" D_CMND_SLEEP "\":%d,\"" D_JSON_BOOTCOUNT "\":%d,\"" D_JSON_SAVECOUNT "\":%d,\"" D_JSON_SAVEADDRESS "\":\"%X\"}}"),
+      baudrate, Settings.mqtt_grptopic, Settings.ota_url, GetResetReason().c_str(), GetDateAndTime(DT_UPTIME).c_str(), GetDateAndTime(DT_RESTART).c_str(), Settings.sleep, Settings.bootcount, Settings.save_flag, GetSettingsAddress());
     MqttPublishPrefixTopic_P(option, PSTR(D_CMND_STATUS "1"));
   }
 
@@ -1262,8 +1262,8 @@ void PublishStatus(uint8_t payload)
 
   if (energy_flg) {
     if ((0 == payload) || (9 == payload)) {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS9_MARGIN "\":{\"" D_CMND_POWERLOW "\":%d,\"" D_CMND_POWERHIGH "\":%d,\"" D_CMND_VOLTAGELOW "\":%d,\"" D_CMND_VOLTAGEHIGH "\":%d,\"" D_CMND_CURRENTLOW "\":%d,\"" D_CMND_CURRENTHIGH "\":%d}}"),
-        Settings.energy_min_power, Settings.energy_max_power, Settings.energy_min_voltage, Settings.energy_max_voltage, Settings.energy_min_current, Settings.energy_max_current);
+      snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS9_MARGIN "\":{\"" D_CMND_POWERDELTA "\":%d,\"" D_CMND_POWERLOW "\":%d,\"" D_CMND_POWERHIGH "\":%d,\"" D_CMND_VOLTAGELOW "\":%d,\"" D_CMND_VOLTAGEHIGH "\":%d,\"" D_CMND_CURRENTLOW "\":%d,\"" D_CMND_CURRENTHIGH "\":%d}}"),
+        Settings.energy_power_delta, Settings.energy_min_power, Settings.energy_max_power, Settings.energy_min_voltage, Settings.energy_max_voltage, Settings.energy_min_current, Settings.energy_max_current);
       MqttPublishPrefixTopic_P(option, PSTR(D_CMND_STATUS "9"));
     }
   }

sonoff/xdrv_03_energy.ino

@@ -29,12 +29,14 @@
 enum EnergyHardware { ENERGY_NONE, ENERGY_HLW8012, ENERGY_CSE7766, ENERGY_PZEM004T };
 
 enum EnergyCommands {
+  CMND_POWERDELTA,
   CMND_POWERLOW, CMND_POWERHIGH, CMND_VOLTAGELOW, CMND_VOLTAGEHIGH, CMND_CURRENTLOW, CMND_CURRENTHIGH,
   CMND_POWERCAL, CMND_POWERSET, CMND_VOLTAGECAL, CMND_VOLTAGESET, CMND_CURRENTCAL, CMND_CURRENTSET,
   CMND_ENERGYRESET, CMND_MAXENERGY, CMND_MAXENERGYSTART,
   CMND_MAXPOWER, CMND_MAXPOWERHOLD, CMND_MAXPOWERWINDOW,
   CMND_SAFEPOWER, CMND_SAFEPOWERHOLD, CMND_SAFEPOWERWINDOW };
 const char kEnergyCommands[] PROGMEM =
+  D_CMND_POWERDELTA "|"
   D_CMND_POWERLOW "|" D_CMND_POWERHIGH "|" D_CMND_VOLTAGELOW "|" D_CMND_VOLTAGEHIGH "|" D_CMND_CURRENTLOW "|" D_CMND_CURRENTHIGH "|"
   D_CMND_POWERCAL "|" D_CMND_POWERSET "|" D_CMND_VOLTAGECAL "|" D_CMND_VOLTAGESET "|" D_CMND_CURRENTCAL "|" D_CMND_CURRENTSET "|"
   D_CMND_ENERGYRESET "|" D_CMND_MAXENERGY "|" D_CMND_MAXENERGYSTART "|"
@@ -51,6 +53,9 @@ float energy_start = 0;           // 12345.12345 kWh total previous
 unsigned long energy_kWhtoday;    // 1212312345 Wh * 10^-5 (deca micro Watt hours) - 5763924 = 0.05763924 kWh = 0.058 kWh = energy_daily
 unsigned long energy_period = 0;  // 1212312345 Wh * 10^-5 (deca micro Watt hours) - 5763924 = 0.05763924 kWh = 0.058 kWh = energy_daily
 
+float energy_power_last[3] = { 0 };
+uint8_t energy_power_delta = 0;
+
 bool energy_power_on = true;
 
 byte energy_min_power_flag = 0;
@@ -264,6 +269,7 @@ uint8_t cse_receive_flag = 0;
 long voltage_cycle = 0;
 long current_cycle = 0;
 long power_cycle = 0;
+unsigned long power_cycle_first = 0;
 long cf_pulses = 0;
 long cf_pulses_last_time = CSE_PULSES_NOT_INITIALIZED;
 
@@ -314,9 +320,6 @@ void CseReceived()
   power_cycle = serial_in_buffer[17] << 16 | serial_in_buffer[18] << 8 | serial_in_buffer[19];
   cf_pulses = serial_in_buffer[21] << 8 | serial_in_buffer[22];
 
-//  if (adjustement & 0x80) {  // CF overflow
-//    cf_pulses += 0x10000;
-//  }
   if (energy_power_on) {  // Powered on
     if (adjustement & 0x40) {  // Voltage valid
       energy_voltage = (float)(Settings.energy_voltage_calibration * CSE_UREF) / (float)voltage_cycle;
@@ -325,9 +328,16 @@ void CseReceived()
       if ((header & 0xF2) == 0xF2) {  // Power cycle exceeds range
         energy_power = 0;
       } else {
-        energy_power = (float)(Settings.energy_power_calibration * CSE_PREF) / (float)power_cycle;
+        if (0 == power_cycle_first) power_cycle_first = power_cycle;  // Skip first incomplete power_cycle
+        if (power_cycle_first != power_cycle) {
+          power_cycle_first = -1;
+          energy_power = (float)(Settings.energy_power_calibration * CSE_PREF) / (float)power_cycle;
+        } else {
+          energy_power = 0;
+        }
       }
     } else {
+      power_cycle_first = 0;
       energy_power = 0;  // Powered on but no load
     }
     if (adjustement & 0x20) {  // Current valid
@@ -338,6 +348,7 @@ void CseReceived()
       }
     }
   } else {  // Powered off
+    power_cycle_first = 0;
     energy_voltage = 0;
     energy_power = 0;
     energy_current = 0;
@@ -638,6 +649,20 @@ void EnergyMarginCheck()
     return;
   }
 
+  if (Settings.energy_power_delta) {
+    float delta = abs(energy_power_last[0] - energy_power);
+    // Any delta compared to minimal delta
+    float min_power = (energy_power_last[0] > energy_power) ? energy_power : energy_power_last[0];
+    if (((delta / min_power) * 100) > Settings.energy_power_delta) {
+      energy_power_delta = 1;
+      energy_power_last[1] = energy_power;  // We only want one report so reset history
+      energy_power_last[2] = energy_power;
+    }
+  }
+  energy_power_last[0] = energy_power_last[1];  // Shift in history every second allowing power changes to settle for up to three seconds
+  energy_power_last[1] = energy_power_last[2];
+  energy_power_last[2] = energy_power;
+
   if (energy_power_on && (Settings.energy_min_power || Settings.energy_max_power || Settings.energy_min_voltage || Settings.energy_max_voltage || Settings.energy_min_current || Settings.energy_max_current)) {
     energy_power_u = (uint16_t)(energy_power);
     energy_voltage_u = (uint16_t)(energy_voltage);
@@ -743,6 +768,8 @@ void EnergyMarginCheck()
     }
   }
 #endif  // FEATURE_POWER_LIMIT
+
+  if (energy_power_delta) EnergyMqttShow();
 }
 
 void EnergyMqttShow()
@@ -752,6 +779,7 @@ void EnergyMqttShow()
   EnergyShow(1);
   snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s}"), mqtt_data);
   MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_ENERGY), Settings.flag.mqtt_sensor_retain);
+  energy_power_delta = 0;
 }
 
 /*********************************************************************************************\
@@ -768,7 +796,14 @@ boolean EnergyCommand()
   unsigned long nvalue = 0;
 
   int command_code = GetCommandCode(command, sizeof(command), XdrvMailbox.topic, kEnergyCommands);
-  if (CMND_POWERLOW == command_code) {
+  if (CMND_POWERDELTA == command_code) {
+    if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 101)) {
+      Settings.energy_power_delta = (1 == XdrvMailbox.payload) ? DEFAULT_POWER_DELTA : XdrvMailbox.payload;
+    }
+    nvalue = Settings.energy_power_delta;
+    unit = UNIT_PERCENTAGE;
+  }
+  else if (CMND_POWERLOW == command_code) {
     if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 3601)) {
       Settings.energy_min_power = XdrvMailbox.payload;
     }

sonoff/xdrv_07_home_assistant.ino

@@ -53,24 +53,7 @@ const char HASS_DISCOVER_LIGHT_SCHEME[] PROGMEM =
   "%s,\"effect_command_topic\":\"%s\","            // cmnd/led2/Scheme
   "\"effect_state_topic\":\"%s\","                 // stat/led2/RESULT
   "\"effect_value_template\":\"{{value_json." D_CMND_SCHEME "}}\","
-  "\"effect_list\":\"[0, 1, 2, 3, 4]\"";           // Needs to be a Python string list providing Scheme parameter values (Unable to get this functional)
-*/
-/*
-#1690 - investigate
-effect_list:
-- 0
-- 1
-- 2
-- 3
-- 4
-- 5
-- 6
-- 7
-- 8
-- 9
-- 10
-- 11
-- 12
+  "\"effect_list\":[\"0\",\"1\",\"2\",\"3\",\"4\"]";  // string list with reference to scheme parameter. Currently only supports numbers 0 to 11 as it make the mqtt string too long
 */
 void HAssDiscovery()
 {