v4.1.3

4.1.3 20170410
* Add user configuarble GPIO to module S20 Socket and Slampher
* Add support for Sonoff SC (#112)
* Set PWM frequency from 1000Hz to 910Hz as used on iTead Sonoff Led
firmware (#122)
* Set Sonoff Led unconfigured floating outputs to 0 to reduce exceptions
due to power supply instabilities (#122)
* Add Access Point Mac Address to Status 11 and Telemetry (#329)
* Fix DS18B20 negative temperature readings (#334)

sonoff/webserver.ino

@@ -268,11 +268,11 @@ const char HTTP_SNS_HUM[] PROGMEM =
 const char HTTP_SNS_PRESSURE[] PROGMEM =
   "<tr><th>%s Pressure</th><td>%s hPa</td></tr>";
 const char HTTP_SNS_LIGHT[] PROGMEM =
-  "<tr><th>%s Light</th><td>%d of 10</td></tr>";
+  "<tr><th>%s Light</th><td>%d%</td></tr>";
 const char HTTP_SNS_NOISE[] PROGMEM =
-  "<tr><th>%s Noise</th><td>%d of 10</td></tr>";
+  "<tr><th>%s Noise</th><td>%d%</td></tr>";
 const char HTTP_SNS_DUST[] PROGMEM =
-  "<tr><th>%s Air quality</th><td>%d of 10</td></tr>";
+  "<tr><th>%s Air quality</th><td>%d%</td></tr>";
 const char HTTP_END[] PROGMEM =
   "</div>"
   "</body>"

sonoff/xdrv_snfsc.ino

@@ -78,8 +78,9 @@ void sc_rcvstat(char *rcvstat)
     for (str = strtok_r(rcvstat, ":", &p); str && i < 5; str = strtok_r(NULL, ":", &p)) value[i++] = atoi(str);
     if (value[0] > 0) {
       for (byte i = 0; i < 5; i++) sc_value[i] = value[i];
-      sc_value[2] = 11 - sc_value[2];  // Invert light level
-      sc_value[4] = 11 - sc_value[4];  // Invert dust level
+      sc_value[2] = (11 - sc_value[2]) * 10;  // Invert light level
+      sc_value[3] *= 10;
+      sc_value[4] = (11 - sc_value[4]) * 10;  // Invert dust level
       Serial.write("AT+SEND=ok\e");
     } else {
       Serial.write("AT+SEND=fail\e");