Problem Downloading code to Wifi Rev2 #33
Comments
ghost
mentioned this issue
|
After some months working with the board, suddenly I got the same message: |
|
Bernardo,
Did you change your code so that you were forcing the compiler to use more flash instead of RAM? IE
Serial.print(F("Write something on the Serial Monitor that is stored in FLASH"));
Or
const char StyleHTML[] =" some long string like a web page”;
My issue started after I started using these.
…-tim
From: Bernardo Tabuenca <[email protected]>
Sent: Monday, May 6, 2019 10:49 PM
To: arduino/ArduinoCore-megaavr <[email protected]>
Cc: TimEllis2019 <[email protected]>; Author <[email protected]>
Subject: Re: [arduino/ArduinoCore-megaavr] Problem Downloading code to Wifi Rev2 (#33)
After some months working with the board, suddenly I got the same message:
_____
Arduino: 1.8.9 (Mac OS X), Board: "Arduino Uno WiFi Rev2, ATMEGA328"
Sketch uses 1534 bytes (3%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
avrdude: bad response to enter progmode command: 0xa0
avr_read(): error reading address 0x0000
read operation failed for memory "signature"
avrdude: error reading signature data for part "ATmega4809", rc=-67
avrdude: error reading signature data, rc=-67
avrdude: error reading signature data, rc=-67
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub <#33 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/ALDZRXLUXRRGABXCIGXBYFLPUEJ6FANCNFSM4HJGN5ZQ> . <https://github.com/notifications/beacon/ALDZRXKI3SIDDYFPI2SH6LLPUEJ6FA5CNFSM4HJGN5Z2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODUZY3JY.gif>
|
|
Unfortunately, that is not my case. |
|
Just tried with a 2nd Arduino UNO wifi rev-2 that was working this morning. Now I get the same message and did not modified any line of code. This is how things happened:
Now I have 2 Arduinos UNO wifi rev-2 not working. I cannot upload any program Please let me know if I could help |
|
Hi everyone, |
|
@TimEllis2019 Can you please send us a top photo of your board? |
|
@agdl Here you are a photo from mine
|
|
Photo attached. Please let me know if you need anything else.
…-tim
From: Arturo Guadalupi <[email protected]>
Sent: Wednesday, May 8, 2019 8:37 AM
To: arduino/ArduinoCore-megaavr <[email protected]>
Cc: TimEllis2019 <[email protected]>; Mention <[email protected]>
Subject: Re: [arduino/ArduinoCore-megaavr] Problem Downloading code to Wifi Rev2 (#33)
@TimEllis2019 <https://github.com/TimEllis2019> Can you please send us a top photo of your board?
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub <#33 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/ALDZRXIHHJOKINT7PAMTTWLPULXQHANCNFSM4HJGN5ZQ> . <https://github.com/notifications/beacon/ALDZRXOVP7YHACDWHSH3KUDPULXQHA5CNFSM4HJGN5Z2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODU6P5RA.gif>
|
|
Martino, would it be helpful to send my board in?
From: Martino Facchin <[email protected]>
Sent: Wednesday, May 8, 2019 12:55 AM
To: arduino/ArduinoCore-megaavr <[email protected]>
Cc: TimEllis2019 <[email protected]>; Author <[email protected]>
Subject: Re: [arduino/ArduinoCore-megaavr] Problem Downloading code to Wifi Rev2 (#33)
Hi everyone,
we are bisecting the issue to understand what could be the root cause. Feel free to contact the support for a replacement in the meantime.
—
You are receiving this because you authored the thread.
Reply to this email directly, <#33 (comment)> view it on GitHub, or <https://github.com/notifications/unsubscribe-auth/ALDZRXM4PER7BANIZUITQ2TPUKBOFANCNFSM4HJGN5ZQ> mute the thread. <https://github.com/notifications/beacon/ALDZRXL37XYOMLR6ISSGKCTPUKBOFA5CNFSM4HJGN5Z2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODU5LQ2A.gif>
|
@TimEllis2019 email attachments don't work on GitHub. Please open this issue thread in your browser: #33 |
|
Let me know if you want me to send back my board if that is of use.
…-tim
From: Arturo Guadalupi <[email protected]>
Sent: Wednesday, May 8, 2019 8:37 AM
To: arduino/ArduinoCore-megaavr <[email protected]>
Cc: TimEllis2019 <[email protected]>; Mention <[email protected]>
Subject: Re: [arduino/ArduinoCore-megaavr] Problem Downloading code to Wifi Rev2 (#33)
@TimEllis2019 <https://github.com/TimEllis2019> Can you please send us a top photo of your board?
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub <#33 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/ALDZRXIHHJOKINT7PAMTTWLPULXQHANCNFSM4HJGN5ZQ> . <https://github.com/notifications/beacon/ALDZRXOVP7YHACDWHSH3KUDPULXQHA5CNFSM4HJGN5Z2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODU6P5RA.gif>
|
|
I don’t see a picture. Gethub sent my email back saying no attachments. Then failed because my email was too big.
From: Bernardo Tabuenca <[email protected]>
Sent: Wednesday, May 8, 2019 3:14 PM
To: arduino/ArduinoCore-megaavr <[email protected]>
Cc: TimEllis2019 <[email protected]>; Mention <[email protected]>
Subject: Re: [arduino/ArduinoCore-megaavr] Problem Downloading code to Wifi Rev2 (#33)
Here you are a photo from mine
<https://user-images.githubusercontent.com/895658/57411914-3c0b3280-71ef-11e9-915c-03c3ba6b1bf1.jpg>
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub <#33 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/ALDZRXLPGRNGXVHOT5MY2Z3PUNGDNANCNFSM4HJGN5ZQ> . <https://github.com/notifications/beacon/ALDZRXLZIUL3PPNSKWNK4IDPUNGDNA5CNFSM4HJGN5Z2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODU7QRFA.gif>
|
|
@TimEllis2019 , sure, feel free to contact support linking this thread so we'll be able to track the issue is a sane way. |
|
Since yesterday I have the same problem with my Arduino Uno Wifi Rev 2. It would be great if someone finds a solution for this bug. I also wrote an email to the Arduino support and I am waiting for an answer. Is it maybe possible to exchange the defect Arduino, because it is in the warranty time? My actual project is a multi medial steering platform for the Tinkerkit Braccio and the Arduino is the leading component for me. |
|
|
|
I also suffer from the same issue. i couldn't download the code to Arduino wifi rev 2. This report would have more information with Any update on this issue? |
|
I am getting the same issue. Arduino Uno Wifi Rev 2, purchased today. Was working perfectly. Ran the WifiNina check firmware version sketch, it worked. Loaded the WifiNina update firmware sketch, tried to update and got this: Sketch uses 6806 bytes (13%) of program storage space. Maximum is 49152 bytes. I have another Wifi Rev 2 its a little older, that has no issues. The board details are: |
|
When trying to upload blink Sketch uses 1544 bytes (3%) of program storage space. Maximum is 49152 bytes. avrdude: Version 6.3-20171130 avrdude: Found CMSIS-DAP compliant device, using EDBG protocol avrdude: Partial Family_ID returned: "mega" An error occurred while uploading the sketch avrdude done. Thank you. |
|
Didn't want to close the issue directly, but thanks to the replacements you sent us we have a solution 🙂 First of all, the problem is probably due to a bug in avrdude, which incorrectly writes the CRC bits (fuse SYSCFG0 - 0x05). I'm currently producing new |
|
Core 1.8.1 had just been released, boards exibiting the issue will just self-fix on the first upload using the new core 😄 |
|
I just downloaded the new core and was able to reprogram my “failing Wifi Rev 2” board.
One comment, when I went to the board manager it did not tell me a new version of the code was available like I remember in the past when changes were made. I had to look at the download list to see 1.8.1.
Thanks for your efforts on this.
From: Martino Facchin <[email protected]>
Sent: Friday, May 24, 2019 8:22 AM
To: arduino/ArduinoCore-megaavr <[email protected]>
Cc: TimEllis2019 <[email protected]>; Mention <[email protected]>
Subject: Re: [arduino/ArduinoCore-megaavr] Problem Downloading code to Wifi Rev2 (#33)
Core 1.8.1 had just been released, boards exibiting the issue will just self-fix on the first upload using the new core 😄
@jan1za <https://github.com/jan1za> @TimEllis2019 <https://github.com/TimEllis2019> @per1234 <https://github.com/per1234> @btabuenca <https://github.com/btabuenca> @jguen <https://github.com/jguen> @OmriEg <https://github.com/OmriEg>
—
You are receiving this because you were mentioned.
Reply to this email directly, <#33?email_source=notifications&email_token=ALDZRXNK5AHRTRVMF3XGK5TPXAB27A5CNFSM4HJGN5Z2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODWFWRSA#issuecomment-495675592> view it on GitHub, or <https://github.com/notifications/unsubscribe-auth/ALDZRXIDDXCFBUHDM33ZQE3PXAB27ANCNFSM4HJGN5ZQ> mute the thread. <https://github.com/notifications/beacon/ALDZRXMEFZJH4EYLZD6Q2G3PXAB27A5CNFSM4HJGN5Z2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODWFWRSA.gif>
|
|
Thank you for all the work. Unfortunately I exchanged the WiFi rev 2 for a
yun as I needed a working demo for today else I would have tried the fix.
Thank you once again for all your efforts.
…On Fri, 24 May 2019 at 18:46, TimEllis2019 ***@***.***> wrote:
I just downloaded the new core and was able to reprogram my “failing Wifi
Rev 2” board.
One comment, when I went to the board manager it did not tell me a new
version of the code was available like I remember in the past when changes
were made. I had to look at the download list to see 1.8.1.
Thanks for your efforts on this.
From: Martino Facchin ***@***.***>
Sent: Friday, May 24, 2019 8:22 AM
To: arduino/ArduinoCore-megaavr ***@***.***>
Cc: TimEllis2019 ***@***.***>; Mention <
***@***.***>
Subject: Re: [arduino/ArduinoCore-megaavr] Problem Downloading code to
Wifi Rev2 (#33)
Core 1.8.1 had just been released, boards exibiting the issue will just
self-fix on the first upload using the new core 😄
@jan1za <https://github.com/jan1za> @TimEllis2019 <
https://github.com/TimEllis2019> @per1234 <https://github.com/per1234>
@btabuenca <https://github.com/btabuenca> @jguen <https://github.com/jguen>
@OmriEg <https://github.com/OmriEg>
—
You are receiving this because you were mentioned.
Reply to this email directly, <
#33?email_source=notifications&email_token=ALDZRXNK5AHRTRVMF3XGK5TPXAB27A5CNFSM4HJGN5Z2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODWFWRSA#issuecomment-495675592>
view it on GitHub, or <
https://github.com/notifications/unsubscribe-auth/ALDZRXIDDXCFBUHDM33ZQE3PXAB27ANCNFSM4HJGN5ZQ>
mute the thread. <
https://github.com/notifications/beacon/ALDZRXMEFZJH4EYLZD6Q2G3PXAB27A5CNFSM4HJGN5Z2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODWFWRSA.gif>
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<#33?email_source=notifications&email_token=ABOCZTV2EWTHRF5LK47WUN3PXALWVA5CNFSM4HJGN5Z2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODWF53UY#issuecomment-495705555>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ABOCZTXYVOKP6SCAC4YJKELPXALWVANCNFSM4HJGN5ZQ>
.
|
|
Thanks for your work guys! Now it works. Just for your information in case it helps ... now I get the following warning: |
I get this too. Using an Uno wifi rev2 in both arduino IDE and Visual Studio 2017 with vMicro plugin. Things seem to work anyway, do I need to fix anything? if so, how can I 'use 0xcd instead of 0xc9'? |
@EbStewart no. See arduino/Arduino#9443 |
|
My version of the compiler works fine. I get the same warnings but my code works.
…-tim
From: per1234 <[email protected]>
Sent: Friday, January 3, 2020 5:33 PM
To: arduino/ArduinoCore-megaavr <[email protected]>
Cc: TimEllis2019 <[email protected]>; Mention <[email protected]>
Subject: Re: [arduino/ArduinoCore-megaavr] Problem Downloading code to Wifi Rev2 (#33)
do I need to fix anything?
@EbStewart <https://github.com/EbStewart> no. See arduino/Arduino#9443 <arduino/Arduino#9443>
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub <#33?email_source=notifications&email_token=ALDZRXNCMHLQWRP4HKLF2VDQ37RNDA5CNFSM4HJGN5Z2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEICODWA#issuecomment-570745304> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALDZRXMSFOGBJFGQ6BSUU4LQ37RNDANCNFSM4HJGN5ZQ> . <https://github.com/notifications/beacon/ALDZRXJFHB2KBHEKESWDXKTQ37RNDA5CNFSM4HJGN5Z2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEICODWA.gif>
|
|
Mine seems to as well, but I want it to continue to do so. If this blows up at the last minute I'm screwed, so I want to be sure.
…On 4 January 2020 04:05:27 GMT, TimEllis2019 ***@***.***> wrote:
My version of the compiler works fine. I get the same warnings but my
code works.>
>
-tim>
>
>
>
From: per1234 ***@***.***> >
Sent: Friday, January 3, 2020 5:33 PM>
To: arduino/ArduinoCore-megaavr
***@***.***>>
Cc: TimEllis2019 ***@***.***>; Mention
***@***.***>>
Subject: Re: [arduino/ArduinoCore-megaavr] Problem Downloading code to
Wifi Rev2 (#33)>
>
>
>
do I need to fix anything?>
>
@EbStewart <https://github.com/EbStewart> no. See arduino/Arduino#9443
<arduino/Arduino#9443> >
>
—>
You are receiving this because you were mentioned.>
Reply to this email directly, view it on GitHub
<#33?email_source=notifications&email_token=ALDZRXNCMHLQWRP4HKLF2VDQ37RNDA5CNFSM4HJGN5Z2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEICODWA#issuecomment-570745304>
, or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ALDZRXMSFOGBJFGQ6BSUU4LQ37RNDANCNFSM4HJGN5ZQ>
.
<https://github.com/notifications/beacon/ALDZRXJFHB2KBHEKESWDXKTQ37RNDA5CNFSM4HJGN5Z2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEICODWA.gif>
>
>
>
>
-- >
You are receiving this because you were mentioned.>
Reply to this email directly or view it on GitHub:>
#33 (comment)
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
|
|
@per1234 Thank you. |
|
Should this still be happening as of late July? |
|
Mid August of 2020 and I am having similar problem. I tried it on 2 different computers using Windows 7 with same result. I ordered a new "Uno wifi Rev2" board, but want this one to work too. I didn't get quite as far as those above. Com Port seems to show up correctly and appear / disappear when I plug / unplug usb cable. I am trying to upload simple blink program. Error report: Arduino: 1.8.13 (Windows 7), Board: "Arduino Uno WiFi Rev2, ATMEGA328" avrdude: Version 6.3-20171130 avrdude: Found CMSIS-DAP compliant device, using EDBG protocol avrdude: Short read, read only 0 out of 64 bytes avrdude: Short read, read only 0 out of 64 bytes avrdude: Failed to write 64 bytes to USB avrdude done. Thank you. This report would have more information with Any and all recommendation or advice is appreciated. Thank you. |
|
Check your board manager. Your library for arduino megaARV boards should be 1.8.6. It's been a while but I think that fixed my issue with this. |
|
Hi Tim, Some other possibly relevant stuff: I ordered a new Uno wifi Rev2 board which should arrive Monday. Hopefully it will work, but any other suggestions are welcome. |
|
I just tried it with the arduino online tools. They recognized that it was an arduino Uno wifi Rev2, but everything else was the same as far as error received :( |
|
Why are you using the setting emulating ATMEGA328? I did have mine working well when set to Atmega 4809. (But now something else has blown up. I'll come back to the discussion later, time permitting.) Anyway, see if that has anything to do with your woes. |
|
Thank you for the reply. I tried that too. In the Tools menu > Registers Emulation, the 2 choices I get are: Then the first line in the output shows: The only other thing that shows up different in the error output is at the very end, it says: And I still receive information with either Registers Emulation mode when I exercise Tools > Get Board Info |
|
That’s what I have loaded, and my UNO WiFi rev 2 continues to have the error; UNO does not.
Thanks
Barry
…---
"They laughed at Columbus, they laughed at Fulton, they laughed at the Wright Brothers. But they also laughed at Bozo the Clown." - Carl Sagan
On Aug 21, 2020, at 3:05 PM, TimEllis2019 ***@***.***> wrote:
Check your board manager. Your library for arduino megaARV boards should be 1.8.6. It's been a while but I think that fixed my issue with this.
-tim
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub <#33 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AABILZNI47U6YIYPL7AF7WTSB3VTTANCNFSM4HJGN5ZQ>.
|
|
2 months since the last post made here, I still have this issue and I'm unable to fix it. I thought it was a linux issue (I used arch linux for the record) and now I've tried it on windows and I have word for word the same issue. I've tried many versions of the megaARV boards including the latest (1.8.6). I have an equivalent of the UNO WiFi Rev 2 but it seems to be identical to my understanding. If someone could shed some more light on this issue that would be great, please and thank you. Edit: |
|
I have custom made PCB using ATMEGA4809 (according to schematic ( https://camo.githubusercontent.com/0318ea09473584a26d3f653e1501e8ba43a524259eb7dfe0a36920a9d6d7bd05/68747470733a2f2f692e696d6775722e636f6d2f784e6778627a582e706e67)) I am getting following error, I am using atmel ICE (updi) avrdude: Version 6.3-20201216 avrdude: usbdev_open(): Found Atmel-ICE CMSIS-DAP, serno: J42700031106 avrdude: Partial Family_ID returned: "" Reading | avrdude: bad response to enter progmode command: 0xa0 avrdude done. Thank you. Error while burning bootloader. I am trying to burn bootloader ( on UART1, I have connections according to my schematics) |
|
Hi, this is Tim Ellis’ wife, Debbie Ellis.
Tim Ellis died unexpectedly on January 7. Can you please remove him from your lists, so that no more emails will come to his computer?
Thank you, Tim’s wife
From: manilal2 <[email protected]>
Sent: Tuesday, January 26, 2021 3:45 PM
To: arduino/ArduinoCore-megaavr <[email protected]>
Cc: TimEllis2019 <[email protected]>; Mention <[email protected]>
Subject: Re: [arduino/ArduinoCore-megaavr] Problem Downloading code to Wifi Rev2 (#33)
I have custom made PCB using ATMEGA4809 (according to schematic ( https://camo.githubusercontent.com/0318ea09473584a26d3f653e1501e8ba43a524259eb7dfe0a36920a9d6d7bd05/68747470733a2f2f692e696d6775722e636f6d2f784e6778627a582e706e67))
I am getting following error, I am using atmel ICE (updi)
avrdude: Version 6.3-20201216
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/root/.arduino15/packages/MegaCoreX/hardware/megaavr/1.0.7/avrdude.conf"
User configuration file is "/root/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : usb
Using Programmer : atmelice_updi
avrdude: usbdev_open(): Found Atmel-ICE CMSIS-DAP, serno: J42700031106
avrdude: max packet size expected 912, but found 512 due to EP 0x01's wMaxPacketSize
avrdude: Found CMSIS-DAP compliant device, using EDBG protocol
AVR Part : ATmega4809
Chip Erase delay : 0 us
PAGEL : P00
BS2 : P00
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 0
StabDelay : 0
CmdexeDelay : 0
SyncLoops : 0
ByteDelay : 0
PollIndex : 0
PollValue : 0x00
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
prodsig 0 0 0 0 no 61 61 0 0 0 0x00 0x00
fuses 0 0 0 0 no 9 0 0 0 0 0x00 0x00
fuse0 0 0 0 0 no 1 0 0 0 0 0x00 0x00
fuse1 0 0 0 0 no 1 0 0 0 0 0x00 0x00
fuse2 0 0 0 0 no 1 0 0 0 0 0x00 0x00
fuse4 0 0 0 0 no 1 0 0 0 0 0x00 0x00
fuse5 0 0 0 0 no 1 0 0 0 0 0x00 0x00
fuse6 0 0 0 0 no 1 0 0 0 0 0x00 0x00
fuse7 0 0 0 0 no 1 0 0 0 0 0x00 0x00
fuse8 0 0 0 0 no 1 0 0 0 0 0x00 0x00
lock 0 0 0 0 no 1 0 0 0 0 0x00 0x00
data 0 0 0 0 no 0 0 0 0 0 0x00 0x00
usersig 0 0 0 0 no 64 64 0 0 0 0x00 0x00
flash 0 0 0 0 no 49152 128 0 0 0 0x00 0x00
eeprom 0 0 0 0 no 256 64 0 0 0 0x00 0x00
Programmer Type : JTAGICE3_UPDI
Description : Atmel-ICE (ARM/AVR) in UPDI mode
ICE hardware version: 0
ICE firmware version: 1.41 (rel. 137)
Serial number : J42700031106
Vtarget : 5.01 V
JTAG clock megaAVR/program: 1000 kHz
JTAG clock megaAVR/debug: 1000 kHz
JTAG clock Xmega: 1000 kHz
PDI clock Xmega : 1000 kHz
avrdude: Partial Family_ID returned: ""
avrdude: AVR device initialized and ready to accept instructions
Reading | avrdude: bad response to enter progmode command: 0xa0
avr_read(): error reading address 0x0000
read operation failed for memory "signature"
avrdude: error reading signature data for part "ATmega4809", rc=-70
avrdude: error reading signature data, rc=-70
avrdude done. Thank you.
Error while burning bootloader.
I am trying to burn bootloader ( on UART1, I have connections according to my schematics)
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub <#33 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALDZRXKH5ORKFSMMVSYOSOTS35HWHANCNFSM4HJGN5ZQ> . <https://github.com/notifications/beacon/ALDZRXPUWFOCUOPXTEU7SPTS35HWHA5CNFSM4HJGN5Z2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOFXCUPRI.gif>
|
|
My condolences Debbie. Arduino doesn't have any way to unsubscribe your account. If you click the "unsubscribe" link at the bottom of the email it will unsubscribe you from this specific thread, but that doesn't affect the other threads you are subscribed to. You can control the email notification preferences for the entire account here: |
|
how do you execute chip erase using updi...? |
|
I was able to program third board using atmel ( microchip) studio , where I erased it before programming , after programming verification was successful , when I try to flash sketch ( led blink sketch ) it gave me (bootloader and arduino IDE verification error , subsequently I tried to reprogram atmega4809 ( 48 pin) bootloader and I was not able to put in program mode , is there some fuse setting which will allow me to put atmeag4809 in program mode , right now I am unable to program it ( it says unable to put atmega4809 in programming mode , once program I am unable to erase it ) also what bootloader I should be using my parameters are 20Mhz internal clock, baud rate 115200,optiboot UART on serial 1 ,BOD 2.6v ,48 pin standard, Reset pin Reset , can some one give me filename for bootloader and where it is in arduino ide...? |
Co-authored-by: Martino Facchin <[email protected]>
More details in arduino/ArduinoCore-megaavr#33 (comment) Co-authored-by: Martino Facchin <[email protected]>
More details in arduino/ArduinoCore-megaavr#33 (comment) Co-authored-by: Martino Facchin <[email protected]>
More details in arduino/ArduinoCore-megaavr#33 (comment) Co-authored-by: Martino Facchin <[email protected]>
More details in arduino/ArduinoCore-megaavr#33 (comment) Co-authored-by: Martino Facchin <[email protected]>
My code compiles fine but when I get to the downloading part of a new install I get the following error. At the bottom of the error list it says the board is not connected but when I get the board info the window shows the correct info.
Arduino: 1.8.9 (Windows Store 1.8.21.0) (Windows 10), Board: "Arduino Uno WiFi Rev2, None (ATMEGA4809)"
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.21.0_x86__mdqgnx93n4wtt\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.21.0_x86__mdqgnx93n4wtt\hardware -hardware C:\Users\telli\Documents\ArduinoData\packages -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.21.0_x86__mdqgnx93n4wtt\tools-builder -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.21.0_x86__mdqgnx93n4wtt\hardware\tools\avr -tools C:\Users\telli\Documents\ArduinoData\packages -built-in-libraries C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.21.0_x86__mdqgnx93n4wtt\libraries -libraries C:\Users\telli\Documents\Arduino\libraries -fqbn=arduino:megaavr:uno2018:mode=off -vid-pid=0X03EB_0X2145 -ide-version=10809 -build-path C:\Users\telli\AppData\Local\Temp\arduino_build_873433 -warnings=none -build-cache C:\Users\telli\AppData\Local\Temp\arduino_cache_444121 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avr-gcc\5.4.0-atmel3.6.1-arduino2 -prefs=runtime.tools.avr-gcc-5.4.0-atmel3.6.1-arduino2.path=C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avr-gcc\5.4.0-atmel3.6.1-arduino2 -prefs=runtime.tools.arduinoOTA.path=C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\arduinoOTA\1.2.1 -prefs=runtime.tools.arduinoOTA-1.2.1.path=C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\arduinoOTA\1.2.1 -prefs=runtime.tools.avrdude.path=C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino14 -prefs=runtime.tools.avrdude-6.3.0-arduino14.path=C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino14 -verbose C:\Users\telli\Documents\Arduino\temp_control\temp_control.ino
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.21.0_x86__mdqgnx93n4wtt\arduino-builder -compile -logger=machine -hardware C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.21.0_x86__mdqgnx93n4wtt\hardware -hardware C:\Users\telli\Documents\ArduinoData\packages -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.21.0_x86__mdqgnx93n4wtt\tools-builder -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.21.0_x86__mdqgnx93n4wtt\hardware\tools\avr -tools C:\Users\telli\Documents\ArduinoData\packages -built-in-libraries C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.21.0_x86__mdqgnx93n4wtt\libraries -libraries C:\Users\telli\Documents\Arduino\libraries -fqbn=arduino:megaavr:uno2018:mode=off -vid-pid=0X03EB_0X2145 -ide-version=10809 -build-path C:\Users\telli\AppData\Local\Temp\arduino_build_873433 -warnings=none -build-cache C:\Users\telli\AppData\Local\Temp\arduino_cache_444121 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avr-gcc\5.4.0-atmel3.6.1-arduino2 -prefs=runtime.tools.avr-gcc-5.4.0-atmel3.6.1-arduino2.path=C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avr-gcc\5.4.0-atmel3.6.1-arduino2 -prefs=runtime.tools.arduinoOTA.path=C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\arduinoOTA\1.2.1 -prefs=runtime.tools.arduinoOTA-1.2.1.path=C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\arduinoOTA\1.2.1 -prefs=runtime.tools.avrdude.path=C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino14 -prefs=runtime.tools.avrdude-6.3.0-arduino14.path=C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino14 -verbose C:\Users\telli\Documents\Arduino\temp_control\temp_control.ino
Using board 'uno2018' from platform in folder: C:\Users\telli\Documents\ArduinoData\packages\arduino\hardware\megaavr\1.6.26
Using core 'arduino' from platform in folder: C:\Users\telli\Documents\ArduinoData\packages\arduino\hardware\megaavr\1.6.26
Detecting libraries used...
"C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avr-gcc\5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10809 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DMILLIS_USE_TIMERB3 "-IC:\Users\telli\Documents\ArduinoData\packages\arduino\hardware\megaavr\1.6.26\cores\arduino/api/deprecated" "-IC:\Users\telli\Documents\ArduinoData\packages\arduino\hardware\megaavr\1.6.26\cores\arduino" "-IC:\Users\telli\Documents\ArduinoData\packages\arduino\hardware\megaavr\1.6.26\variants\uno2018" "C:\Users\telli\AppData\Local\Temp\arduino_build_873433\sketch\temp_control.ino.cpp" -o nul
Generating function prototypes...
"C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avr-gcc\5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10809 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DMILLIS_USE_TIMERB3 "-IC:\Users\telli\Documents\ArduinoData\packages\arduino\hardware\megaavr\1.6.26\cores\arduino/api/deprecated" "-IC:\Users\telli\Documents\ArduinoData\packages\arduino\hardware\megaavr\1.6.26\cores\arduino" "-IC:\Users\telli\Documents\ArduinoData\packages\arduino\hardware\megaavr\1.6.26\variants\uno2018" "C:\Users\telli\AppData\Local\Temp\arduino_build_873433\sketch\temp_control.ino.cpp" -o "C:\Users\telli\AppData\Local\Temp\arduino_build_873433\preproc\ctags_target_for_gcc_minus_e.cpp"
"C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.21.0_x86__mdqgnx93n4wtt\tools-builder\ctags\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\Users\telli\AppData\Local\Temp\arduino_build_873433\preproc\ctags_target_for_gcc_minus_e.cpp"
Compiling sketch...
"C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avr-gcc\5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10809 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DMILLIS_USE_TIMERB3 "-IC:\Users\telli\Documents\ArduinoData\packages\arduino\hardware\megaavr\1.6.26\cores\arduino/api/deprecated" "-IC:\Users\telli\Documents\ArduinoData\packages\arduino\hardware\megaavr\1.6.26\cores\arduino" "-IC:\Users\telli\Documents\ArduinoData\packages\arduino\hardware\megaavr\1.6.26\variants\uno2018" "C:\Users\telli\AppData\Local\Temp\arduino_build_873433\sketch\temp_control.ino.cpp" -o "C:\Users\telli\AppData\Local\Temp\arduino_build_873433\sketch\temp_control.ino.cpp.o"
Compiling libraries...
Compiling core...
Using previously compiled file: C:\Users\telli\AppData\Local\Temp\arduino_build_873433\core\variant.c.o
Using precompiled core: C:\Users\telli\AppData\Local\Temp\arduino_cache_444121\core\core_arduino_megaavr_uno2018_mode_off_dcb64d4f6a6de1966fae6a8c32168afe.a
Linking everything together...
"C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avr-gcc\5.4.0-atmel3.6.1-arduino2/bin/avr-gcc" -w -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections -mmcu=atmega4809 -o "C:\Users\telli\AppData\Local\Temp\arduino_build_873433/temp_control.ino.elf" "C:\Users\telli\AppData\Local\Temp\arduino_build_873433\sketch\temp_control.ino.cpp.o" "C:\Users\telli\AppData\Local\Temp\arduino_build_873433\core\variant.c.o" "C:\Users\telli\AppData\Local\Temp\arduino_build_873433/..\arduino_cache_444121\core\core_arduino_megaavr_uno2018_mode_off_dcb64d4f6a6de1966fae6a8c32168afe.a" "-LC:\Users\telli\AppData\Local\Temp\arduino_build_873433" -lm
"C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avr-gcc\5.4.0-atmel3.6.1-arduino2/bin/avr-objcopy" -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 "C:\Users\telli\AppData\Local\Temp\arduino_build_873433/temp_control.ino.elf" "C:\Users\telli\AppData\Local\Temp\arduino_build_873433/temp_control.ino.eep"
"C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avr-gcc\5.4.0-atmel3.6.1-arduino2/bin/avr-objcopy" -O ihex -R .eeprom "C:\Users\telli\AppData\Local\Temp\arduino_build_873433/temp_control.ino.elf" "C:\Users\telli\AppData\Local\Temp\arduino_build_873433/temp_control.ino.hex"
"C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avr-gcc\5.4.0-atmel3.6.1-arduino2/bin/avr-size" -A "C:\Users\telli\AppData\Local\Temp\arduino_build_873433/temp_control.ino.elf"
Sketch uses 11336 bytes (23%) of program storage space. Maximum is 49152 bytes.
Global variables use 326 bytes (5%) of dynamic memory, leaving 5818 bytes for local variables. Maximum is 6144 bytes.
C:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino14/bin/avrdude -CC:\Users\telli\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino14/etc/avrdude.conf -v -patmega4809 -cxplainedmini_updi -Pusb -b115200 -e -D -Uflash:w:C:\Users\telli\AppData\Local\Temp\arduino_build_873433/temp_control.ino.hex:i -Ufuse5:w:0xC9:m -Ufuse8:w:0x00:m
avrdude: Version 6.3-20171130
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
avrdude: Found CMSIS-DAP compliant device, using EDBG protocol
AVR Part : ATmega4809
Chip Erase delay : 0 us
PAGEL : P00
BS2 : P00
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 0
StabDelay : 0
CmdexeDelay : 0
SyncLoops : 0
ByteDelay : 0
PollIndex : 0
PollValue : 0x00
Memory Detail :
avrdude: Partial Family_ID returned: "mega"
avrdude: AVR device initialized and ready to accept instructions
Reading | avrdude: bad response to enter progmode command: 0xa0
avr_read(): error reading address 0x0000
read operation failed for memory "signature"
avrdude: error reading signature data for part "ATmega4809", rc=-67
avrdude: error reading signature data, rc=-67
avrdude done. Thank you.
the selected serial port
does not exist or your board is not connected
The text was updated successfully, but these errors were encountered: