DockerLocal

DockerLocal is used for setting up a LEMP site to be served on localhost:PORT

DockerLocal runs on docker containers - nginx + php-fpm, memcached, redis, mysql/mariadb and your project's web application files. Provides customization for configuring the Dockerfile, nginx, php-fpm, and managing databases.

Note: Your DockerLocal containers can also be used with ProxyLocal for a local DNS of all your DockerLocal projects so that you can run your sites locally at custom domains, like docker.yoursite.com and docker.anothersite.com

Easy Version Setting

The master branch has the latest versions (see defaults below) - but they are configurable in the /versions/ folder.

You can configure the following:

Ubuntu Version (default 20.04)
PHP Version (default 8.0)
Database Image Mysql or Mariadb (default mariadb:10.6)

Note: For convenience, you could also checkout a specific branch eg. PHP-7.4 and use those defaults (or adjust using same technique ^).

Requirements

Bash 4+ on linux; MacOS default 3.2.57 is okay - recommend using zsh - install via curl
Docker for Mac (or Docker && Docker-Compose) - tested with Docker version 20.10.0, build 7287ab3
- docker-compose 1.29.2 (not v2 - disable in your terminal with: docker-compose disable-v2 - because docker-compose v1 uses underscores, not dashes, the scripts depend on)

Using MsSQL/SQLsvr?

DockerLocal does not support mssql/sqlsvr by default anymore - because it's not compatible with macs using m1 chips (docker does not support).

To enable MsSQL, use a custom Dockerfile. We have created a template you can copy with necessary packages:

cp Dockerfile-template-use-mssql-example Dockerfile-template-custom

Note: You can make any changes you want to the Dockerfile-template-custom - to install different packages, etc.

↑

Install

The following will cover how to install and use DockerLocal:

Where to clone
Simple installation examples

Cloning DockerLocal into your project

Clone DockerLocal into at the same level as your site's html folder

- YourSite
    - DockerLocal
    - html/index.php
    - conf

Assuming the above,

cd ~/code/YourSite
git clone [email protected]:amurrell/DockerLocal.git

Note: You can also use DockerLocal as a git submodule

↑

Simple Install Examples

Control DockerLocal with shell commands. All the following examples rely upon:

Going to the commands folder. cd DockerLocal/commands
Understanding that shell scripts are triggered with a ./ preceeding the command, eg. ./site-up
If you get prompted for a password, use your user's password for your computer!

Examples:

Ex: Basic
Ex: With specifc port
Ex: With New Empty Database
Ex: With Remote-fetched Database
Ex: With different root path

↑

Ex: Basic

This will install your site at localhost:3000 with no custom configuration (no database, default port, default webserver's root path eg. html/index.php or html/index.html).

Run ./site-up

↑

Ex: With specific port

First, shutdown your previously loaded containers with ./site-down. Skip if you have not ran ./site-up yet.

Then, use ./site-up -p=XXXX to specify a different port, eg. localhost:XXXX

Tip: create a port file to maintain this project without having to type the switch -p for every command you run:

./site-down first, shutdown containers if you already started them on another port
cd ../ && echo "3001" > port this puts a file "port" in DockerLocal folder
cd commands && ./site-up (no need to use -p switch)

Now it's running on your custom port 3001!

Go to localhost:3001

↑

Ex: With New Empty Database

To create a database, you can use the switch -c=DB_NAME. You only need to run this once.

To edit the database name your DockerLocal containers will use a database configuration file. You can change this, but you will still need to use the -c switch to create new databases (one time).

./site-up -c=example_local_db, where switch -c means create database. Run only 1 time to create.

You can safely shutdown and start up again and it remembers you're using that db (in php env vars) - because of that configuration file.

./site-down to shut it down
./site-up to start up again

↑

With Remote-fetched Database

This example shows getting an sql dump of a remote database and importing it into a local copy in the mysql container.

Copy the DockerLocal/databases-example.yml to DockerLocal\databases.yml and fill it out with your remote host information.

./site-up

↑

With Different Root Path

If your project's root path for the public website files are in a different folder, you can configure that via the DockerLocal/web-server-root file.

You can create this file initially with:

./site-up -w=/var/www/site/app/public

The first time you run that, it will create your configuration file. After that, it will only override that file if you pass -w again. To permanently change it, do so in the configuration file.

↑

Commands

Shut down

cd DockerLocal/commands
./site-down

Proxy Down

cd ~/vhosts/ProxyLocal/commands
./proxy-down

↑

Checking Logs

If you want to check your log files, you can find them in DockerLocal/logs.

Your queue logs, access.log, php_error_log.log and error.log are all in that folder.

For quick tailing of the logs, you can use the DockerLocal/commands for ./site-logs:

Ex: In your code

error_log(json_encode($myObject));

Ex: In your terminal, in DockerLocal/commands:

./site-logs     # All the logs are tailed
./site-logs -p  # Only php_error_log is tailed
./site-logs -e  # Only error_log is tailed
./site-logs -a  # Only access.log is tailed
./site-logs -h  # Help to find what the switches are

↑

NPM Command

If you have a nested project that uses nvm & npm to build, you can run ./site-npm with some options -p=<path> and -n=<commands>.

This makes it easier to install & run npm commands from the DockerLocal/commands folder.

## where 'my-app' is a folder at the root of your project.
## inside your container it would be at /var/www/site/my-app
./site-npm -p="my-app" -n="npm install && npm run development"

Configuration Helper: To save you time from having to specify the path all the time, save a file in DockerLocal/app-path with the path in it. eg. my-app

# from your terminal, at root of project:
echo "my-app" > DockerLocal/app-path

↑

Database Commands

Create

cd DockerLocal/commands
./site-db -c=example_database_name

Use Locally Created DB

cd DockerLocal/commands
./site-db -l=example_database_name (if DockerLocal/database exists, the -l switch is not needed)

Use a remote database to create local db

setup databases.yml by copying contents from DockerLocal/databases-example.yml
cd DockerLocal/commands
./site-up this will create a db-name.sql.remote.dump file, one time.

Re-fetch remote database to update local db (needs databases.yml).

ensure databases.yml is up to date
cd DockerLocal/commands
./site-db

Export local database

If you don't know then name of your current database:
- cat DockerLocal/database
If you want to see all databases you have locally:
- cd DockerLocal/commands && ./site-ssh -h=mysql && show databases;
If you know the name of your local db then:
- cd DockerLocal/commands
- ./site-db -d=your_db
This generates a file DockerLocal/data/dumps/your_db.sql.dump which you may want to rename so you wont write over this from subsequent dumps.
If you want this dump to include add/drop SQL:
- cd DockerLocal/commands
- ./site-db -d=your_db -a=true

Import a file ( including create database sql )

cd DockerLocal/commands
./site-db -f=import-complete.sql

Import a file to an existing local db

cd DockerLocal/commands
./site-db -i=name_of_local_db -f=import-partial.sql

↑

SSH into the containers

./site-ssh -h=mysql and you'll be in mysql app as root user of mysql
./site-ssh -h=mysqlroot to get into the container as root shell user. Can do mysql -u root -p1234 to get into mysql app.
./site-ssh -h=web && cd /var/www/site/ to see your project. Run commands that might create files (ie. php artisan for laravel projects) as this www-data user.
./site-ssh -h=webroot to get into the web container as root. Good for looking at confs etc cd /etc/php/7.0/fpm/pool.d for php-fpm conf, or cd /etc/nginx/ for nginx conf
./site-ssh -h=memcached .. there's really no reason to be here.
./site-ssh -h=web -c='cat /etc/passwd' where -c is a command to pass into the web container. Notice the difference between using single quotes. ie -c="$(whoami)"and-c='$(whoami)'`.

↑

Share your site

Requires Ngrok

cd DockerLocal/commands
./site-ngrok

Install ngrok

Download ngrok
Unzip it to your Applications directory
ln -s /Applications/ngrok /usr/local/bin/ngrok

↑

site-nvmpm2

You can use nvm (at a specific version) and pm2 (globally installed) with DockerLocal - they are already installed via the Dockerfile-Template.

If a DockerLocal/ecosystem.config.js file exists, which is a configuration file for pm2, then also the site-up command will pm2 start for you.

Additionally, running ./site-nvmpm2 manually will trigger a pm2 restart all if the ecosystem file exists.

Often times, you need to restart pm2 servers to catch changes to the code that is running inside the queues.

Eg. Laravel jobs will need you to reload workers (or horizon) after making changes to the code. Running ./site-nvmpm2 will pm2 restart all.

Example: Restart all servers

cd DockerLocal/commands
./site-nvmpm2

Example: Manually access pm2 commands

cd DockerLocal/commands
./site-ssh -h=web
cd ~
pm2 list all

↑

Configuration Files

Version Overrides

You can use the defaults or choose a different version for:

ubuntu & php & nodejs & yaml versions in the Dockerfile-template. Variables (used in the file) are:
- UBUNTU_VERSION
- PHP_VERSION
- NVM_VERSION
mysql or mariadb version in docker-compose-custom.yml for the mysql image. Variable (used in the file) is:
- DB_IMAGE

You can see the default configs in DockerLocal/versions in the form of files:

DockerLocal
- versions
    - php-version
      > 7.4
    - ubuntu-release-name
      > focal
    - ubuntu-version
      > 20.04
    - db-image
      > mariadb:10.5.8
    - nvm-version (nodejs version)
      > 16.14.2
    - yaml-version
      > 2.2.1 (changes to 2.2.3 when php8.1+)

If you cat versions/php-version you'll see the contents are just the version:

8.0

You can overide any of these by copying the file and renaming to prepend override. Eg.

echo "7.4" > versions/override-php-version

Changing existing DB image version

If you have an existing database with data in it using one image (eg. mysql) and you plan to switch to another (eg. mariadb), then you will need to backup your database, remove the docker volume, re-import your data.

Note: This is not an issue if you are changing the version of the same db image type (eg. mariadb:10.5.8 -> mariadb:10.6).

Here are the steps:

Get a backup SQL dump of your current setup
- ./site-db -d=your_db_name
- cd DockerLocal/data/dumps
- mv your_db_name.sql.dump or whatever it's called to before_db_image_upgrade.sql
Turn off the docker containers if running - ./site-down.

Remove the data volume - make sure you have a backup!

[sudo] docker volume ls
see which one it is... eg. dockerlocal{PORT}-mysql-data-{PORT}
[sudo] docker volume rm <name-of-volume>

Make the version change - eg. echo "mariadb:10.6" > versions/override-db-image
Turn back on ./site-up - then create a db again ./site-up -c=your_db_name
Import: ./site-db -i=your_db_name -f=before_db_image_upgrade.sql

↑

DockerLocal/port

If you would like to create a default custom port (other than 3000) for all commands in this project, create a port file.

The port in the command refers to localhost:port and it is used in DockerLocal by all the containers (to create their mapped ports and container names).

cd DockerLocal
echo "3001" > port

Of course, you can still override this default by using the -p switch.

So, your commands would be so simple:

./site-up
./site-db
./site-ssh -h=web
./site-down

↑

DockerLocal/web-server-root

The default is root path is /var/www/site/html, which assumes that you have an index.php or index.html file directly in your html folder.

What if your project was different?

- YourSite
    - DockerLocal
    - app/public/index.php
    - conf

You can create this file initially with:

./site-up -w=/var/www/site/app/public

The first time you run that, it will create your configuration file. After that, it will only override that file if you pass -w again. To permanently change it, do so in the configuration file.

To confirm that your path is loaded correctly, you can check your DockerLocal\nginx.site.computed.conf file that is generated from running ./site-up. You should see the root YOURPATH line in your nginx server block.

↑

DockerLocal/xdebug.custom.ini

Use the file xdebug.custom.ini to override xdebug.ini. If you don't have it, create it. Like all overriding/custom configuration, it will not be version controlled.

Your custom file (or the default file if no custom is set) will be computed into xdebug.computed.ini by the site-up command and then referenced in the Dockerfile-Template to add xdebug config to your project.

Turn off xdebug

If you want to turn off xdebug, change the line xdebug.mode=develop,debug to xdebug.mode=off in the file DockerLocal/xdebug.custom.ini (if you don't have that file, create it by copying DockerLocal/xdebug.ini). After changing this custom file, always run ./site-up again.

You can find information about how to use xdebug here.

↑

DockerLocal/nginx.site.custom.conf

Use this file to override the nginx.site.conf. You can start by copying the nginx.site.conf file and then making your edits.

The nginx.site.computed.conf file is basically the same as your custom, but with variables computed.

The following variables are available to use in your nginx.site.custom.conf file:

SITE_DOMAIN - this will use SITE_DOMAIN for those running proxylocal, or smartly use WEB_PORT if not
WEB_SERVER_ROOT - this is your web servers root path. See DockerLocal/web-server-root

↑

DockerLocal/database

After running the -c=DB_NAME command, you will have a file in DockerLocal/database with the DB_NAME in it.

You can change this out by editing the file. To create new databases, you will still use the -c switch (1 time).

You can use -l switch to specify a different local database than the one saved in DockerLocal/database - this just overrides which one to use, but doesn't edit the file.

To confirm your database file is being read correctly, you can check the DockerLocal/env-custom.yml file for your DB_NAME.

To confirm your database exists, you can ssh into the mysql container: ./site-ssh -h=mysql and show databases;

↑

DockerLocal/databases.yml

If you have a remote database to use as a source to populate your local database, create a databases.yml

Copy databases-example.yml to databases.yml

Ex:

databases:
    host:
    user:
    pass:
    port: 3306
    3001: example_com

↑

DockerLocal/env-example.yml, env.yml

This file is for PHP env vars. Make your own as env.yml if you need to customize it.
Can use for local database connection
Variables you can use:
- DATABASE_NAME (Will be populated by matching site-port in databases.yml, or -c and -l switch values, for creating or using a locally created database)
- DATABASE_HOST (relative to web container: mysql)
- DATABASE_PORT (relative to host machine: your localhost:port + 3306, eg. 6307 if port is 3001)

See the output of your env vars in php7-fpm.site.custom.conf

Ex:

envs:
    DL_DB_NAME: DATABASE_NAME
    DL_DB_USER: root
    DL_DB_PASS: 1234
    DL_DB_HOST: mysql
    DL_DB_PORT: 3306
    DL_DB_LOCAL_PORT: DATABASE_PORT

php7 conf:

env[DL_DB_NAME]="example_com"
env[DL_DB_USER]="root"
env[DL_DB_PASS]="1234"
env[DL_DB_HOST]="mysql"
env[DL_DB_PORT]="3306"
env[DL_DB_LOCAL_PORT]="6307"

↑

DockerLocal/php7-fpm.site.conf

This is a template file, for the outputted php7-fpm.site.custom.conf. Ensure you keep ;ENV in your template for env vars to populate there. The rest is yours to modify!

NOTE: If you modify this file, it will look like unstaged file changes.

TODO: change php7-fpm.site.custom.conf to be a computed file, and allow for edits to get stored in the custom file.)

↑

DockerLocal/Dockerfile-template

The "Web" container is defined by this Dockerfile-template.

it contains variables to help with versioning: UBUNTU_VERSION and PHP_VERSION
it relies on the ./site-up script to compute the variables to create an untracked file: Dockerfile-computed
- this is what gets used by docker-compose.

Customize

If you need to install any other php libraries or modify this template beyond the version overrides, feel free to create a copy, edit and save as Dockerfile-template-custom, which will get used over Dockerfile-template.

↑

DockerLocal/ecosystem.config.js

This file is a special configuration file for pm2, a process manager and npm package.

PM2 is useful for projects that have workers, running on queues using CLI - typically asynchronous. An example is laravel worker queues for jobs (or running them through laravel horizon).

nvm-pm2 script

PM2 is included with DockerLocal via the nvm-pm2.sh script that is ran by both the Dockerfile-Template && site-up command after the docker containers are booted.

The first call installs nvm at the nvm-version (node js version). It also installs pm2 globablly.
The second call, from site-up will pm2 start if you have a DockerLocal/ecosystem.config.js
You can manually call it any time with ./site-nvmpm2 in the DockerLocal/commands folder, which will basically pm2 restart all, if ecosystem.config.js is present.

To access commands directly, see next section, Accessing pm2 directly.

For help with the contents of ecosystem.config.js, see:

PM2 + Laravel Horizon
PM2 + Laravel Horizon + XDebug
Perform your own google searches, since this is a configuration for PM2 specifically.

↑

Accessing pm2 directly

You can site-ssh to access pm2 commands directly.

./site-ssh -h=web
cd ~
pm2 list all

↑

PM2 + Laravel Horizon

If you are planning to use pm2 to run horizon, here's an example configuration for that:

{
      name: "laravel-horizon",
      cwd: "./site/app",
      interpreter: "php",
      script_path: "/var/www/site/app/artisan",
      script: "artisan",
      args: "horizon",
      instances: 1,
      autorestart: true,
      watch: false,
      max_memory_restart: "1G",
      merge_logs: true,
      out_file: "/var/www/site/DockerLocal/logs/horizon.log",
      error_file: "/var/www/site/DockerLocal/logs/horizon.log",
      log_date_format: "MM/DD/YYYY HH:mm:ss",
    }

↑

PM2 + Laravel Horizon + XDebug

If you are wanting to use xdebug to monitor CLI running queue workers eg. in laravel via horizon, I caution that horizon runs every second which may become a very difficult testing environment... but it can be done. Here's an example ecosystem file entry to accomplish running xdebug on horizon via pm2.

{
    name: "xdebug-horizon",
    cwd: "./site/app",
    interpreter: "php",
    script_path: "/var/www/site/app/artisan",
    script: "artisan",
    args: "-dxdebug.remote_autostart=1 -dxdebug.remote_host=host.docker.internal -dxdebug.remote_port=9000 -dxdebug.remote_enable=1 horizon",
    instances: 1,
    autorestart: true,
    watch: false,
    max_memory_restart: "1G",
    merge_logs: true,
    out_file: "/var/www/site/DockerLocal/logs/horizon.log",
    error_file: "/var/www/site/DockerLocal/logs/horizon.log",
    log_date_format: "MM/DD/YYYY HH:mm:ss",
},

↑

Install nvm-pm2

You can use pm2 with this project, but it's a bit more manual.

Look at the documentation for the configuration file DockerLocal/ecosystem.config.js for more information on how it install nvm-pm2 and setup config.

If you were tangentally looking how to install nvm on your local machine (not in the container), and do not want to use brew, here's how:

curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.33.6/install.sh | bash
. ~/.nvm/nvm.sh
. ~/.profile
. ~/.bashrc
. ~/.zshrc

export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"  # This loads nvm
[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion"  # This loads nvm bash_completion

command -v nvm

↑

Database cnf files

If you need to adjust settings eg. my.cnf for the database (mysql|mariadb) image, you can add *.cnf config files to DockerLocal/data/custom/.

Note: options.cnf is already in version control, but you can create any other files there and have them ignored - eg. my.cnf

How does it work? In the docker-compose, there's a shared volume which connects these files to the container's /etc/mysql/conf.d:

volumes:
...
- ./data/custom:/etc/mysql/conf.d
...

↑

Use xdebug

Xdebug is a debugging tool that communicates with your IDE while listening to incoming requests to your application. It does all this on another localhost:<port> and with configuration. This means:

your web application & server will need necessary packages - eg. php-xdebug.
your web application / server will need necessary configuration - eg. in xdebug.ini (custom configuration available in xdebug.custom.ini)
your IDE will need an extension installed so that the debugger and the IDE can communicate
your IDE may need configuration on how to connect to your debugger - eg. launch.json in vscode

So the first two items on the list are solved by DockerLocal by default!

The Dockerfile-template has installed the php-xdebug package for your version.
It also added the xdebug.computed.ini to appropriate location in the container. If you want to change settings, read about using custom configuration file xdebug.custom.ini, which includes how to disable xdebug.

Xdebug with VScode

To use xdebug with vscode & DockerLocal, simply:

Install the xdebugging extension for your IDE - eg. vscode needs a PHP X-debug extension if using a php debugger. eg. extension id: xdebug.php-debug
If you don't yet have a hidden .vscode folder ("hidden" is indicated by leading .) - add one to your root repo <your-project>/.vscode so that it looks something like this:
```
- your-project
    - .vscode
    - DockerLocal
    - html
        - your-code
```

add a launch.json file into this .vscode folder, or add just the configuration entry if you have a launch.json file already.

Example: launch.json

{
    // Use IntelliSense to learn about possible attributes.
    // Hover to view descriptions of existing attributes.
    // For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
    "version": "0.2.0",
    "configurations": [
        {
            "name": "Listen for Xdebug",
            "type": "php",
            "request": "launch",
            "port": 9003,
            "pathMappings": {
            "/var/www/site": "${workspaceFolder}"
            }
        }
    ]
}

Explanations of the configuration:

The /var/www/site in "/var/www/site": "${workspaceFolder}" references the path to your running application within DockerLocal web container - where php is running. cd DockerLocal/commands && ./site-ssh -h=web and you are in that same directory.
The ${workspaceFolder} portion references the IDE vscode's folder for the project.

If you want to add extensions.json in your .vscode folder, so that they can be recommended to anyone who runs your code:
```
{
    "recommendations": [
        "xdebug.php-debug"
    ]
}
```

Use debugger in vscode

So once everything is setup, go to your debugger tab in vscode (looks like a play button with bug over it).

In the top left - it says "Run and debug" with a dropdown. In the dropdown, use the "Listen For Xdebug" which is going to mirror what you wrote in your launch.json if that is setup correctly.

Click the Play button. Now some controls appear centered at the top of vscode. It is "listening". Go trigger requests - visit your website, hit postman, whatever to hit your site.

It will stop at any break points and let you look at variables. You can step back, step forward, or click deeper into functions.

Check logs

It's easy to see the xdebug logs due to the configuration setup in Dockerfile-template - we put the logs at /var/www/site/DockerLocal/logs/xdebug.log

You can use the DockerLocal command ./site-logs -x to tail the x debug log as a shortcut for (tail -f xdebug.log)

Note that it will say Could not connect to debugging client. when you are not running the debugger in your IDE. Simply start a debug session and it will connect when you hit your project.

Install ProxyLocal

ProxyLocal - Sets up your hosts file + reverse proxy to access site on localhost:port by domain.

Steps (one time thing):

git clone ProxyLocal in vhosts or equivalent so that it is at the same level as your sites
create sites.yml from sites-example.yml, try: 3001: docker.example.com
go to ProxyLocal/commands and run ./proxy-up command
do normal DockerLocal setup; now can use ./site-up -n=docker.example.com or ./site-up if you have a port file in your DockerLocal that matches an entry in sites.yml

Commands:

git clone [email protected]:amurrell/ProxyLocal.git
cd ProxyLocal/commands
# remember to make the sites.yml in ProxyLocal!
./proxy-up

The reverse proxy is running: localhost

Config in ProxyLocal

ProxyLocal/sites.yml

While this file lives in ProxyLocal's repo, it helps the site commands by allowing -n=docker.example.com to be specified rather than a specific port. This is great if you plan to run many sites with DockerLocal and don't want to remember each site's port.

Ex.

sites:
    3001: docker.example.com

By adding a port: site to sites.yml, you can go to your DockerLocal project and do ./site-up -p=port or if you have a port file ./site-up and it will automatically boot up ProxyLocal if not already running.

Tip: ProxyLocal handles nginx conf enabling - if you have to do it manually you can do cd ProxyLocal/commands && ./proxy-nginx -p=3001 to enable nginx conf for site at port 3001 and ./proxy-nginx -p=3001 -d=true to disable it.

ProxyLocal/databases.yml

You can use one databases.yml in ProxyLocal like this if all your data is at the same remote host, with same user/pass combo:

databases:
    host:
    user:
    pass:
    port: 3306
    3001: example_com
    3002: another_example_com
    3003: yet_another_example_com

Where the databases example_come, another_example_com, etc are remote and can all be accessed by the same host, user, pass, and port. If you need specifics, you can still create a databases.yml per site and keep it in DockerLocal.

The Numbered Keys in that yaml represent the localhost:PORT and therefore corresponding mysql container to import the remote db into: dockerlocal3001-mysql-1

Name		Name	Last commit message	Last commit date
Latest commit History 82 Commits
commands		commands
composer/config		composer/config
data		data
logs		logs
php_sessions		php_sessions
versions		versions
.gitignore		.gitignore
Dockerfile-template		Dockerfile-template
Dockerfile-template-use-mssql-example		Dockerfile-template-use-mssql-example
LICENSE-MIT		LICENSE-MIT
README.md		README.md
databases-example.yml		databases-example.yml
docker-compose-proxylocal.yml		docker-compose-proxylocal.yml
docker-compose.yml		docker-compose.yml
env-example.yml		env-example.yml
nginx.site.conf		nginx.site.conf
nvm-pm2.sh		nvm-pm2.sh
php7-fpm.site.conf		php7-fpm.site.conf
xdebug.ini		xdebug.ini

License

amurrell/DockerLocal

Folders and files

Latest commit

History

Repository files navigation