Merge branch 'master' into fates_fuel_refactor

.gitmodules

@@ -28,7 +28,7 @@
 [submodule "fates"]
 path = src/fates
 url = https://github.com/NGEET/fates
-fxtag = sci.1.78.2_api.36.0.0
+fxtag = sci.1.78.3_api.36.1.0
 fxrequired = AlwaysRequired
 # Standard Fork to compare to with "git fleximod test" to ensure personal forks aren't committed
 fxDONOTUSEurl = https://github.com/NCAR/fates-release

bld/CLMBuildNamelist.pm

@@ -2759,8 +2759,7 @@ SIMYR:    foreach my $sim_yr ( @sim_years ) {
 
   # this check has to be here and not earlier since use_init_interp is set here and hillslope is already set above in setup_logic_hillslope
   if ( &value_is_true($nl->get_value($useinitvar)) && value_is_true($nl->get_value("use_hillslope")) ) {
-     $log->warning("WARNING: You have set use_hillslope while $useinitvar is TRUE.\n This means all hillslope columns in a gridcell will read identical values" .
-                   " from initial conditions. If you are sure you want this behaviour:")
+     $log->warning("WARNING: You have set use_hillslope while $useinitvar is TRUE.\n This means all hillslope columns in a gridcell will read identical values from initial conditions, even if the initial conditions (finidat) file has hillslope information. If you are sure you want this behaviour, add -ignore_warnings to CLM_BLDNML_OPTS.")
   }
 
 } # end initial conditions
@@ -3637,6 +3636,10 @@ sub setup_logic_hillslope {
   if ( (! &value_is_true($use_hillslope)) && &value_is_true($use_hillslope_routing) ) {
       $log->fatal_error("Cannot turn on use_hillslope_routing when use_hillslope is off\n" );
   }
+  my $hillslope_file = $nl->get_value('hillslope_file');
+  if ( &value_is_true($use_hillslope) && ( ! defined($hillslope_file) ) ) {
+    $log->fatal_error("You must provide hillslope_file if use_hillslope is .true.\n" );
+  }
 }
 
 #-------------------------------------------------------------------------------

bld/namelist_files/namelist_definition_ctsm.xml

@@ -962,6 +962,11 @@ Full pathname datafile with fates parameters
 Full pathname of surface data file.
 </entry>
 
+<entry id="hillslope_file" type="char*256"     category="datasets"
+       input_pathname="abs" group="clm_inparm" valid_values="" >
+Full pathname of hillslope data file.
+</entry>
+
 <entry id="fsnowoptics" type="char*256" category="datasets" 
        input_pathname="abs" group="clm_inparm" valid_values="" >
 SNICAR (SNow, ICe, and Aerosol Radiative model) optical data file name

bld/unit_testers/build-namelist_test.pl

@@ -1287,6 +1287,13 @@ sub cat_and_create_namelistinfile {
                );
 foreach my $key ( keys(%failtest) ) {
    print( "$key\n" );
+   my $var;
+   foreach $var ( "phys" , "options", "namelst" ) {
+      if ( not exists $failtest{$key}{$var} ) {
+         die  "ERROR: Subkey $var does not exist for failtest $key\nERROR:Check if you spelled $var correctly\n"
+      }
+   }
+
    &make_config_cache($failtest{$key}{"phys"});
    my $options  = $failtest{$key}{"options"};
    my $namelist = $failtest{$key}{"namelst"};
@@ -1359,13 +1366,21 @@ sub cat_and_create_namelistinfile {
                                      namelst=>"fsurdat='build-namelist_test.pl'",
                                      phys=>"clm6_0",
                                    },
-     "hillslope with init_interp"=>{ options=>"-bgc bgc -envxml_dir .",
-                                     namelst=>"use_init_interp=.true.,use_hillslope=.true.",
+     "hillslope with init_interp"=>{ options=>"--res 10x15 --bgc bgc --envxml_dir .",
+                                     namelst=>"use_init_interp=.true.,use_hillslope=.true.,hillslope_file='/dev/null'",
                                      phys=>"clm6_0",
                                    },
                );
 foreach my $key ( keys(%warntest) ) {
    print( "$key\n" );
+
+   my $var;
+   foreach $var ( "phys" , "options", "namelst" ) {
+      if ( not exists $warntest{$key}{$var} ) {
+         die  "ERROR: Subkey $var does not exist for warntest $key\nERROR:Check if you spelled $var correctly\n"
+      }
+   }
+
    &make_config_cache($warntest{$key}{"phys"});
    my $options  = $warntest{$key}{"options"};
    my $namelist = $warntest{$key}{"namelst"};
@@ -1595,6 +1610,14 @@ sub cat_and_create_namelistinfile {
 
 foreach my $key ( keys(%finidat_files) ) {
    print( "$key\n" );
+
+   my $var;
+   foreach $var ( "phys" , "atm_forc", "res", "bgc", "crop", "use_case", "start_ymd", "namelist" ) {
+      if ( not exists $finidat_files{$key}{$var} ) {
+         die  "ERROR: Subkey $var does not exist for finidat_file $key\nERROR:Check if you spelled $var correctly\n"
+      }
+   }
+
    my $phys = $finidat_files{$key}{'phys'};
    print "physics = $phys\n";
    &make_config_cache($phys);

cime_config/config_component.xml

@@ -16,7 +16,7 @@
     <desc lnd="CLM45[%SP][%SP-VIC][%BGC][%BGC-CROP][%FATES][%BGCDV][%BGCDV-CROP]"                  >clm4.5:</desc>
     <desc lnd="CLM50[%SP][%SP-VIC][%SP-NOANTHRO][%BGC-NOANTHRO][%BGC][%BGC-CROP][%FATES][%BGCDV][%BGCDV-CROP][%BGC-CROP-CMIP6DECK][%BGC-CROP-CMIP6WACCMDECK][%NWP-SP][%NWP-BGC-CROP]">clm5.0:</desc>
     <desc lnd="CLM51[%SP][%SP-NOANTHRO][%BGC-NOANTHRO][%BGC][%BGC-CROP][%FATES][%FATES-SP][%NWP-SP][%NWP-BGC-CROP]">clm5.1:</desc>
-    <desc lnd="CLM60[%SP][%SP-NOANTHRO][%BGC-NOANTHRO][%BGC][%BGC-CROP][%FATES][%FATES-SP][%NWP-SP][%NWP-BGC-CROP]">clm6.0:</desc>
+    <desc lnd="CLM60[%SP][%SP-NOANTHRO][%BGC-NOANTHRO][%BGC][%BGC-CROP][%FATES][%FATES-SP][%BGC-CROP-CMIP6DECK][%BGC-CROP-CMIP6WACCMDECK][%NWP-SP][%NWP-BGC-CROP]">clm6.0:</desc>
     <desc option="SP"              >Satellite phenology:</desc>
 
     <desc option="SP-VIC"          >Satellite phenology with VIC hydrology:</desc>
@@ -371,6 +371,10 @@
       <value grid="l%1.9x2.5" compset="_CLM50%[^_]*CMIP6DECK[%_]"     >$COMP_ROOT_DIR_LND/cime_config/usermods_dirs/cmip6_nociso_deck</value>
       <value                  compset="_CLM50%[^_]*CMIP6WACCMDECK[%_]">$COMP_ROOT_DIR_LND/cime_config/usermods_dirs/cmip6_waccm_deck</value>
       <value grid="l%1.9x2.5" compset="_CLM50%[^_]*CMIP6WACCMDECK[%_]">$COMP_ROOT_DIR_LND/cime_config/usermods_dirs/cmip6_waccm_nociso_deck</value>
+      <value                  compset="_CLM60%[^_]*CMIP6DECK[%_]"     >$COMP_ROOT_DIR_LND/cime_config/usermods_dirs/cmip6_deck</value>
+      <value grid="l%1.9x2.5" compset="_CLM60%[^_]*CMIP6DECK[%_]"     >$COMP_ROOT_DIR_LND/cime_config/usermods_dirs/cmip6_nociso_deck</value>
+      <value                  compset="_CLM60%[^_]*CMIP6WACCMDECK[%_]">$COMP_ROOT_DIR_LND/cime_config/usermods_dirs/cmip6_waccm_deck</value>
+      <value grid="l%1.9x2.5" compset="_CLM60%[^_]*CMIP6WACCMDECK[%_]">$COMP_ROOT_DIR_LND/cime_config/usermods_dirs/cmip6_waccm_nociso_deck</value>
     </values>
     <group>run_component_ctsm</group>
     <file>env_case.xml</file>

cime_config/config_compsets.xml

@@ -200,13 +200,21 @@
     <alias>I1850Clm50BgcCropCmip6</alias>
     <lname>1850_DATM%GSWP3v1_CLM50%BGC-CROP-CMIP6DECK_SICE_SOCN_MOSART_SGLC_SWAV</lname>
   </compset>
+  <compset>
+    <alias>I1850Clm60BgcCropCmip6</alias>
+    <lname>1850_DATM%GSWP3v1_CLM60%BGC-CROP-CMIP6DECK_SICE_SOCN_MOSART_SGLC_SWAV</lname>
+  </compset>
 
   <!-- Primarily for testing the CMIP6WACCMDECK compset option -->
   <!-- Use the CMIP6 version (clm5_0) -->
   <compset>
     <alias>I1850Clm50BgcCropCmip6waccm</alias>
     <lname>1850_DATM%GSWP3v1_CLM50%BGC-CROP-CMIP6WACCMDECK_SICE_SOCN_MOSART_SGLC_SWAV</lname>
   </compset>
+  <compset>
+    <alias>I1850Clm60BgcCropCmip6waccm</alias>
+    <lname>1850_DATM%GSWP3v1_CLM60%BGC-CROP-CMIP6WACCMDECK_SICE_SOCN_MOSART_SGLC_SWAV</lname>
+  </compset>
 
   <!-- clm5_0 (CMIP6) version with BGC-Crop and CRU forcing -->
   <compset>

cime_config/testdefs/ExpectedTestFails.xml

@@ -135,6 +135,17 @@
     </phase>
   </test>
 
+  <test name="SMS_Ld10_D_Mmpi-serial.CLM_USRDAT.I1PtClm60Bgc.izumi_nag.clm-NEON-MOAB--clm-PRISM">
+    <phase name="SHAREDLIB_BUILD">
+      <status>FAIL</status>
+      <issue>#2310</issue>
+    </phase>
+    <phase name="RUN">
+      <status>FAIL</status>
+      <issue>#2310</issue>
+    </phase>
+  </test>
+
   <test name="SMS_Ld10_D_Mmpi-serial.CLM_USRDAT.I1PtClm60Fates.derecho_gnu.clm-FatesPRISM--clm-NEON-FATES-YELL">
     <phase name="SHAREDLIB_BUILD">
       <status>FAIL</status>
@@ -171,6 +182,13 @@
     </phase>
   </test>
 
+  <test name="SMS_Lm3_D_Mmpi-serial.1x1_brazil.I2000Clm50FatesCruRsGs.izumi_intel.clm-FatesColdHydro">
+    <phase name="CREATE_NEWCASE">
+      <status>FAIL</status>
+      <issue>#2454</issue>
+    </phase>
+  </test>
+
   <test name="SMS_Ld10_D_Mmpi-serial.CLM_USRDAT.I1PtClm60Fates.izumi_nag.clm-FatesFireLightningPopDens--clm-NEON-FATES-NIWO">
     <phase name="SHAREDLIB_BUILD">
       <status>FAIL</status>
@@ -245,13 +263,6 @@
     </phase>
   </test>
 
-  <test name="SMS_D_Ld5.5x5_amazon.I1850Clm51Bgc.derecho_gnu.clm-HillslopeC">
-    <phase name="RUN">
-      <status>FAIL</status>
-      <issue>#2423</issue>
-    </phase>
-  </test>
-
   <test name="ERS_D_Ld15.f45_f45_mg37.I2000Clm50FatesRs.derecho_intel.clm-FatesColdTwoStream">
     <phase name="COMPARE_base_rest">
       <status>FAIL</status>
@@ -280,6 +291,13 @@
     </phase>
   </test>
 
+  <test name="ERS_D_Ld30.f45_f45_mg37.I2000Clm50FatesCruRsGs.derecho_intel.clm-FatesColdLandUse">
+    <phase name="SHAREDLIB_BUILD">
+      <status>FAIL</status>
+      <issue>#2810</issue>
+    </phase>
+  </test>
+
   <!-- Other submodule test list failures (MOSART, RTM, etc. -->
 
   <test name="SMS_Lh3.f10_f10_mg37.I2000Clm51Sp.derecho_intel.mosart-clmAccelSpinupIgnoreWarn">