First version of the 1DPAMYT model and setup.py mods

.pre-commit-config.yaml

@@ -7,11 +7,11 @@ repos:
     rev: 23.7.0
     hooks:
     - id: black
-      language_version: python3.10
+      language_version: python3.11
 
 -   repo: https://github.com/astral-sh/ruff-pre-commit
     rev: v0.0.282
     hooks:
     - id: ruff
       args: ["--fix", "--format=github"]
-      language_version: python3.10
+      language_version: python3.11

acis_thermal_check/ReleaseNotes_1DPAMYT_V1.0.txt

@@ -0,0 +1,73 @@
+
+
+Change Description
+==================
+
+The  1PIN1AT and 1CRBT transducer failures had minimal mission impact. 
+
+1DPAMZT is used as a proxy for the internal BEP and FEP PC board temperatures.
+As such, it is an important value in determining the health and performance
+of the instrument.
+
+If the 1DPAMZT transducer fails, we could switch to using the 1DPAMYT
+transducer values to substitute for the 1DPAMZT values. A new 1DPAMYT
+thermal model was created and fitted.  Limits were selected so that the 1DPAMYT
+limits reflect the same FEP and BEP board temperatures as the 1DPAMZT limits.
+
+The new model uses the new Chandra Limits.
+
+
+Files Changed:
+==============
+
+The changed and added files can be seen in this PR:
+
+https://github.com/acisops/acis_thermal_check/pull/72
+https://github.com/sot/chandra_models/pull/124
+https://github.com/sot/chandra_limits/pull/14
+
+
+
+Testing:
+======== 
+
+The model and the updated Chandra Limits code was tested, using the
+following loads:
+
+JAN2224
+JAN2324
+FEB1124
+FEB1924
+FEB2624
+MAR0424
+MAR1124
+MAR1824
+APR0124
+APR0824
+APR1524
+APR2024
+
+The predicted vs actual temperatures were compared and found to agree
+within acceptable limits.
+
+The ACIS load review software will be modified to execute this new model
+in order to continue the test of the model and the fit. But it will not be used
+to plan missions.
+
+
+Interface impacts
+=================
+
+None
+
+
+Review
+====== 
+
+ACIS Ops
+
+
+Deployment Plan
+===============
+
+Deploy as soon as FSDS approval given.

acis_thermal_check/apps/dpamyt_check.py

@@ -0,0 +1,72 @@
+#!/usr/bin/env python
+
+"""
+========================
+1dpamyt_check
+========================
+
+This code generates backstop load review outputs for checking the ACIS
+DPA temperature 1DPAMYT.  It also generates 1DPAMYT model validation
+plots comparing predicted values to telemetry for the previous three
+weeks.
+"""
+import sys
+
+import matplotlib
+from chandra_limits import DPAMYTLimit
+
+from acis_thermal_check import ACISThermalCheck, get_options
+
+# Matplotlib setup
+# Use Agg backend for command-line (non-interactive) operation
+matplotlib.use("Agg")
+
+
+class DPAMYTCheck(ACISThermalCheck):
+    _limit_class = DPAMYTLimit
+
+    def __init__(self):
+        valid_limits = [(1, 2.0), (50, 1.0), (99, 2.0)]
+
+        # Specify the temperature where only those temps greater
+        # than this temperature will be displayed on the histogram.
+        hist_limit = [20.0]
+
+        # Call the superclass' __init__ with the arguments
+        super().__init__("1dpamyt", "dpamyt", valid_limits, hist_limit)
+
+    def _calc_model_supp(self, model, state_times, states, ephem, state0):
+        """
+        Update to initialize the dpa0 pseudo-node. If 1dpamyt
+        has an initial value (T_dpa) - which it does at
+        prediction time (gets it from state0), then T_dpa0
+        is set to that.  If we are running the validation,
+        T_dpa is set to None so we use the dvals in model.comp
+
+        NOTE: If you change the name of the dpa0 pseudo node you
+              have to edit the new name into the if statement
+              below.
+        """
+        if "dpa0" in model.comp:
+            if state0 is None:
+                T_dpa0 = model.comp["1dpamyt"].dvals
+            else:
+                T_dpa0 = state0["1dpamyt"]
+            model.comp["dpa0"].set_data(T_dpa0, model.times)
+
+
+def main():
+    args = get_options()
+    dpamyt_check = DPAMYTCheck()
+    try:
+        dpamyt_check.run(args)
+    except Exception as msg:
+        if args.traceback:
+            raise
+        else:
+            print("ERROR:", msg)
+            sys.exit(1)
+
+
+if __name__ == "__main__":
+    main()

setup.py

@@ -14,6 +14,7 @@
     "console_scripts": [
         "dea_check = acis_thermal_check.apps.dea_check:main",
         "dpa_check = acis_thermal_check.apps.dpa_check:main",
+        "dpamyt_check = acis_thermal_check.apps.dpamyt_check:main",
         "psmc_check = acis_thermal_check.apps.psmc_check:main",
         "acisfp_check = acis_thermal_check.apps.acisfp_check:main",
         "fep1_mong_check = acis_thermal_check.apps.fep1_mong_check:main",
@@ -29,8 +30,8 @@
     use_scm_version=True,
     setup_requires=["setuptools_scm", "setuptools_scm_git_archive"],
     description="ACIS Thermal Model Library",
-    author="John ZuHone",
-    author_email="john.zuhone@cfa.harvard.edu",
+    author="ACIS Ops",
+    author_email="acisdude@cfa.harvard.edu",
     url="https://github.com/acisops/acis_thermal_check",
     data_files=[("templates", templates), ("data", data)],
     include_package_data=True,