Skip to content
/ zigpy Public
forked from zigpy/zigpy

Library implementing a ZigBee stack

License

GPL-3.0, Unknown licenses found

Licenses found

GPL-3.0
LICENSE
Unknown
COPYING
Notifications You must be signed in to change notification settings

Yoda-x/zigpy

 
 

Repository files navigation

zigpy

Build Coverage

zigpy is Zigbee protocol stack integration project to implement the Zigbee Home Automation standard as a Python 3 library.

Zigbee Home Automation integration with zigpy allows you to connect one of many off-the-shelf Zigbee adapters using one of the available Zigbee radio library modules compatible with zigpy to control Zigbee based devices. There is currently support for controlling Zigbee device types such as binary sensors (e.g., motion and door sensors), sensors (e.g., temperature sensors), lightbulbs, switches, and fans.

Zigbee coordinator hardware from many different hardware manufacturers are supported via radio libraries which translate their proprietary communication protocol into a common API which is shared among all radio libraries for zigpy. If some Zigbee coordinator hardware for other manufacturers is not supported by yet zigpy it is possible for any independent developer to step-up and develop a new radio library for zigpy which translates its proprietary communication protocol into the common API that zigpy can understand.

zigpy contains common code implementing Zigbee ZCL, ZDO and application state management which is being used by various radio libraries implementing the actual interface with the radio modules from different manufacturers. The separate radio libraries interface with radio hardware adapters/modules over USB and GPIO using different native UART serial protocols.

Reference implementation of the zigpy library exist in Home Assistant (Python based open source home automation software) as part of its ZHA integration component.

Zigbee device OTA updates

zigpy have code to automatically download and perform OTA (Over-The-Air) firmware updates of Zigbee devices if the OTA firmware image provider source URL for updates is known. The OTA update directory is optional and it can also be used for any offline firmware files that you provide yourself.

Online OTA providers for firmware updates are currently only available for IKEA, LEDVANCE and SALUS devices. Support for OTA updates from other manufacturers could be added to zigpy in the future, if they publish their firmware images publicly.

How to install and test, report bugs, or contribute to this project

For specific instructions on how-to install and test zigpy or contribute bug-reports and code to this project please see the guidelines in the CONTRIBUTING.md file:

This CONTRIBUTING.md file will contain information about using zigpy, testing new releases, troubleshooting and bug-reporting as, as well as library + code instructions for developers and more.

You can contribute to this project either as an end-user, a tester (advanced user contributing constructive issue/bug-reports) or as a developer contributing code.

Compatible Zigbee coordinator hardware

Radio libraries for zigpy are separate projects with their own repositories and include bellows (for communicating with Silicon Labs EmberZNet based radios), zigpy-deconz (for communicating with deCONZ based radios from Dresden Elektronik), and zigpy-xbee (for communicating with XBee based Zigbee radios), zigpy-zigate for communicating with ZiGate based radios, zigpy-znp or zigpy-cc for communicating with Texas Instruments based radios that have Z-Stack ZNP coordinator firmware.

Note! Zigbee 3.0 support or not in zigpy depends primarily on your Zigbee coordinator hardware and its firmware. Some Zigbee coordinator hardware support Zigbee 3.0 but might be shipped with an older firmware which does not, in which case may want to upgrade the firmware manually yourself. Some other Zigbee coordinator hardware may not support a firmware that is capable of Zigbee 3.0 at all but can still be fully functional and feature complete for your needs, (this is very common as many if not most Zigbee devices do not yet Zigbee 3.0 or are backwards-compable with a Zigbee profile that is support by your Zigbee coordinator hardware and its firmware). As a general rule, newer Zigbee coordinator hardware released can normally support Zigbee 3.0 firmware and it is up to its manufacturer to make such firmware available for them.

Compatible zigpy radio libraries

  • Digi XBee based Zigbee radios via the zigpy-xbee library for zigpy.
  • dresden elektronik deCONZ based Zigbee radios via the zigpy-deconz library for zigpy.
  • Silicon Labs (EmberZNet) based Zigbee radios using the EZSP protocol via the bellows library for zigpy.
  • Texas Instruments based Zigbee radios with all compatible Z-Stack firmware via the zigpy-znp library for zigpy.
  • ZiGate based ZigBee radios via the zigpy-zigate library for zigpy.

Legacy or obsolete zigpy radio libraries

  • Texas Instruments with Z-Stack legacy firmware via the zigpy-cc library for zigpy.

Release packages available via PyPI

New packages of tagged versions are also released via the "zigpy" project on PyPI

Older packages of tagged versions are still available on the "zigpy-homeassistant" project on PyPI

Packages of tagged versions of the radio libraries are released via separate projects on PyPI

Related projects

zigpy-cli (zigpy command line interface)

zigpy-cli is a unified command line interface for zigpy radios. The goal of this project is to allow low-level network management from an intuitive command line interface and to group useful Zigbee tools into a single binary.

ZHA Device Handlers

ZHA deviation handling in Home Assistant relies on the third-party ZHA Device Handlers project. Zigbee devices that deviate from or do not fully conform to the standard specifications set by the Zigbee Alliance may require the development of custom ZHA Device Handlers (ZHA custom quirks handler implementation) to for all their functions to work properly with the ZHA component in Home Assistant. These ZHA Device Handlers for Home Assistant can thus be used to parse custom messages to and from non-compliant Zigbee devices. The custom quirks implementations for zigpy implemented as ZHA Device Handlers for Home Assistant are a similar concept to that of Hub-connected Device Handlers for the SmartThings platform as well as that of zigbee-herdsman converters as used by Zigbee2mqtt, meaning they are each virtual representations of a physical device that expose additional functionality that is not provided out-of-the-box by the existing integration between these platforms.

ZHA integration component for Home Assistant

ZHA integration component for Home Assistant is a reference implementation of the zigpy library as integrated into the core of Home Assistant (a Python based open source home automation software). There are also other GUI and non-GUI projects for Home Assistant's ZHA components which builds on or depends on its features and functions to enhance or improve its user-experience, some of those are listed and linked below.

ZHA Custom

zha_custom is a custom component package for Home Assistant (with its ZHA component for zigpy integration) that acts as zigpy commands service wrapper, when installed it allows you to enter custom commands via to zigy to example change advanced configuration and settings that are not available in the UI.

ZHA Map

zha-map for Home Assistant's ZHA component can build a Zigbee network topology map.

ZHA Network Visualization Card

zha-network-visualization-card is a custom Lovelace element for Home Assistant which visualize the Zigbee network for the ZHA component.

ZHA Network Card

zha-network-card is a custom Lovelace card for Home Assistant that displays ZHA component Zigbee network and device information in Home Assistant

Zigzag

Zigzag is a custom card/panel for Home Assistant that displays a graphical layout of Zigbee devices and the connections between them. Zigzag can be installed as a panel or a custom card and relies on the data provided by the zha-map integration component.

ZHA Device Exporter

zha-device-exporter is a custom component for Home Assistant to allow the ZHA component to export lists of Zigbee devices.

ZHA Custom Radios

zha-custom-radios A now obsolete custom component package for Home Assistant (with its ZHA component for zigpy integration) that allows users to test out new zigpy radio libraries and hardware modules before they have officially been integrated into ZHA. This enables developers and testers to test new or updated zigpy radio modules without having to modify the Home Assistant source code.

Zigpy Deconz Parser

zigpy-deconz-parser allow you to parse Home Assistant's ZHA component debug log using zigpy-deconz library if you are using a deCONZ based adapter like ConBee or RaspBee.

ZigCoHTTP

ZigCoHTTP is a stand-alone python application project that creates a ZigBee network using zigpy and bellows. ZigBee devices joining this network can be controlled via a HTTP API. It was developed for a Raspberry Pi using a Matrix Creator Board but should also work with other computers with Silicon Labs Zigbee hardware, or with other Zigbee hardware if replace bellows with other radio library for zigpy.

About

Library implementing a ZigBee stack

Resources

License

GPL-3.0, Unknown licenses found

Licenses found

GPL-3.0
LICENSE
Unknown
COPYING

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Python 100.0%