Updated Resources and Cmdlet documentation pages

docs/docs/resources/exchange/EXOInboundConnector.md

@@ -6,9 +6,9 @@
 | --- | --- | --- | --- | --- |
 | **Identity** | Key | String | The Identity parameter specifies the outbound connector that you want to modify. | |
 | **AssociatedAcceptedDomains** | Write | StringArray[] | The AssociatedAcceptedDomains parameter specifies the accepted domains that the connector applies to, thereby limiting its scope. For example, you can apply the connector to a specific accepted domain in your organization, such as contoso.com. | |
-| **CloudServicesMailEnabled** | Write | Boolean | The CloudServicesMailEnabled parameter specifies whether the connector is used for hybrid mail flow between an on-premises Exchange environment and Microsoft Office 365. Specifically, this parameter controls how certain internal X-MS-Exchange-Organization-* message headers are handled in messages that are sent between accepted domains in the on-premises and cloud organizations. These headers are collectively known as cross-premises headers. DO NOT USE MANUALLY! Valid values are: $true | $false | |
+| **CloudServicesMailEnabled** | Write | Boolean | The CloudServicesMailEnabled parameter specifies whether the connector is used for hybrid mail flow between an on-premises Exchange environment and Microsoft Office 365. Specifically, this parameter controls how certain internal X-MS-Exchange-Organization-* message headers are handled in messages that are sent between accepted domains in the on-premises and cloud organizations. These headers are collectively known as cross-premises headers. DO NOT USE MANUALLY! | |
 | **Comment** | Write | String | The Comment parameter specifies an optional comment. | |
-| **ConnectorSource** | Write | String | The ConnectorSource parameter specifies how the connector is created. DO NOT CHANGE THIS! values are Default (the default) | Migrated | HybridWizard | `Default`, `Migrated`, `HybridWizard` |
+| **ConnectorSource** | Write | String | The ConnectorSource parameter specifies how the connector is created. DO NOT CHANGE THIS! | `Default`, `Migrated`, `HybridWizard` |
 | **ConnectorType** | Write | String | The ConnectorType parameter specifies a category for the domains that are serviced by the connector. Valid values are Partner and OnPremises | `Partner`, `OnPremises` |
 | **EFSkipIPs** | Write | StringArray[] | The EFSkipIPs parameter specifies the source IP addresses to skip in Enhanced Filtering for Connectors when the EFSkipLastIP parameter value is $false. | |
 | **EFSkipLastIP** | Write | Boolean | The EFSkipLastIP parameter specifies the behavior of Enhanced Filtering for Connectors. | |

docs/docs/resources/exchange/EXOMailTips.md

@@ -4,13 +4,13 @@
 
 | Parameter | Attribute | DataType | Description | Allowed Values |
 | --- | --- | --- | --- | --- |
-| **Organization** | Key | String | | |
+| **Organization** | Key | String | Specify the name of your organization. | |
 | **MailTipsAllTipsEnabled** | Write | Boolean | Specifies whether MailTips are enabled. | |
 | **MailTipsGroupMetricsEnabled** | Write | Boolean | Specifies whether MailTips that rely on group metrics data are enabled. | |
 | **MailTipsLargeAudienceThreshold** | Write | UInt32 | Specifies what a large audience is. | |
 | **MailTipsMailboxSourcedTipsEnabled** | Write | Boolean | Specifies whether MailTips that rely on mailbox data (out-of-office or full mailbox) are enabled. | |
 | **MailTipsExternalRecipientsTipsEnabled** | Write | Boolean | Specifies whether MailTips for external recipients are enabled. | |
-| **Ensure** | Write | String | | `Present`, `Absent` |
+| **Ensure** | Write | String | Specifies if this MailTip should exist. | `Present`, `Absent` |
 | **Credential** | Write | PSCredential | Credentials of the Exchange Global Admin | |
 | **ApplicationId** | Write | String | Id of the Azure Active Directory application to authenticate with. | |
 | **TenantId** | Write | String | Id of the Azure Active Directory tenant used for authentication. | |

docs/docs/resources/exchange/EXOOutboundConnector.md

@@ -8,18 +8,18 @@
 | **Enabled** | Write | Boolean | Specifies whether connector is enabled. | |
 | **UseMXRecord** | Write | Boolean | Specifies whether connector should use MXRecords for target resolution. | |
 | **Comment** | Write | String | The Comment parameter specifies an optional comment. | |
-| **ConnectorSource** | Write | String | The ConnectorSource parameter specifies how the connector is created. DO NOT CHANGE THIS! values are Default (the default) | Migrated | HybridWizard  | `Default`, `Migrated`, `HybridWizard` |
-| **ConnectorType** | Write | String | The ConnectorType parameter specifies a category for the domains that are serviced by the connector. Valid values are Partner and OnPremises | `Partner`, `OnPremises` |
+| **ConnectorSource** | Write | String | The ConnectorSource parameter specifies how the connector is created. DO NOT CHANGE THIS! | `Default`, `Migrated`, `HybridWizard` |
+| **ConnectorType** | Write | String | The ConnectorType parameter specifies a category for the domains that are serviced by the connector. | `Partner`, `OnPremises` |
 | **RecipientDomains** | Write | StringArray[] | The RecipientDomains parameter specifies the domain that the Outbound connector routes mail to. You can specify multiple domains separated by commas. | |
 | **SmartHosts** | Write | StringArray[] | The SmartHosts parameter specifies the smart hosts the Outbound connector uses to route mail. This parameter is required if you set the UseMxRecord parameter to $false and must be specified on the same command line. | |
 | **TlsDomain** | Write | String | The TlsDomain parameter specifies the domain name that the Outbound connector uses to verify the FQDN of the target certificate when establishing a TLS secured connection. This parameter is only used if the TlsSettings parameter is set to DomainValidation. Valid input for the TlsDomain parameter is an SMTP domain. You can use a wildcard character to specify all subdomains of a specified domain, as shown in the following example: *.contoso.com. However, you can't embed a wildcard character, as shown in the following example: domain.*.contoso.com | |
-| **TlsSettings** | Write | String | The TlsSettings parameter specifies the TLS authentication level that's used for outbound TLS connections established by this Outbound connector. Valid values are:EncryptionOnly | CertificateValidation | DomainValidation | `EncryptionOnly`, `CertificateValidation`, `DomainValidation` |
-| **IsTransportRuleScoped** | Write | Boolean | The IsTransportRuleScoped parameter specifies whether the Outbound connector is associated with a transport rule (also known as a mail flow rule). Valid values are: $true | $false | |
-| **RouteAllMessagesViaOnPremises** | Write | Boolean | The RouteAllMessagesViaOnPremises parameter specifies that all messages serviced by this connector are first routed through the on-premises messaging system (Centralized mailrouting). Valid values are: $true | $false | |
-| **CloudServicesMailEnabled** | Write | Boolean | The CloudServicesMailEnabled parameter specifies whether the connector is used for hybrid mail flow between an on-premises Exchange environment and Microsoft Office 365. Specifically, this parameter controls how certain internal X-MS-Exchange-Organization-* message headers are handled in messages that are sent between accepted domains in the on-premises and cloud organizations. These headers are collectively known as cross-premises headers. DO NOT USE MANUALLY! Valid values are: $true | $false | |
-| **AllAcceptedDomains** | Write | Boolean | The AllAcceptedDomains parameter specifies whether the Outbound connector is used in hybrid organizations where message recipients are in accepted domains of the cloud-based organization. Valid values are: $true | $false (default) | |
+| **TlsSettings** | Write | String | The TlsSettings parameter specifies the TLS authentication level that's used for outbound TLS connections established by this Outbound connector. | `EncryptionOnly`, `CertificateValidation`, `DomainValidation` |
+| **IsTransportRuleScoped** | Write | Boolean | The IsTransportRuleScoped parameter specifies whether the Outbound connector is associated with a transport rule (also known as a mail flow rule). | |
+| **RouteAllMessagesViaOnPremises** | Write | Boolean | The RouteAllMessagesViaOnPremises parameter specifies that all messages serviced by this connector are first routed through the on-premises messaging system (Centralized mailrouting). | |
+| **CloudServicesMailEnabled** | Write | Boolean | The CloudServicesMailEnabled parameter specifies whether the connector is used for hybrid mail flow between an on-premises Exchange environment and Microsoft Office 365. Specifically, this parameter controls how certain internal X-MS-Exchange-Organization-* message headers are handled in messages that are sent between accepted domains in the on-premises and cloud organizations. These headers are collectively known as cross-premises headers. DO NOT USE MANUALLY! | |
+| **AllAcceptedDomains** | Write | Boolean | The AllAcceptedDomains parameter specifies whether the Outbound connector is used in hybrid organizations where message recipients are in accepted domains of the cloud-based organization. | |
 | **SenderRewritingEnabled** | Write | Boolean | The SenderRewritingEnabled parameter specifies that all messages that normally qualify for SRS rewriting are rewritten for routing through the on-premises email system. | |
-| **TestMode** | Write | Boolean | The TestMode parameter specifies whether you want to enabled or disable test mode for the Outbound connector. Valid values are: $true | $false (default) | |
+| **TestMode** | Write | Boolean | The TestMode parameter specifies whether you want to enabled or disable test mode for the Outbound connector. | |
 | **ValidationRecipients** | Write | StringArray[] | The ValidationRecipients parameter specifies the email addresses of the validation recipients for the Outbound connector. You can specify multiple email addresses separated by commas. | |
 | **Ensure** | Write | String | Specifies if this Outbound connector should exist. | `Present`, `Absent` |
 | **Credential** | Write | PSCredential | Credentials of the Exchange Global Admin | |