Ultimaker · sesse · Aug 4, 2024
diff --git a/resources/definitions/sovol_sv08.def.json b/resources/definitions/sovol_sv08.def.json
@@ -0,0 +1,37 @@
+{
+    "version": 2,
+    "name": "Sovol SV08",
+    "inherits": "voron2_base",
+    "metadata":
+    {
+        "visible": true,
+        "manufacturer": "Sovol 3D",
+        "preferred_variant_name": "0.4mm Nozzle",
+        "quality_definition": "sovol_sv08",
+        "variants_name": "Nozzle Size",
+        "platform": "sovol_sv08_buildplate_model.stl"
+    },
+    "overrides":
+    {
+        "machine_depth": { "default_value": 350 },
+        "machine_width": { "default_value": 350 },
+        "machine_height": { "default_value": 345 },
+        "machine_name": { "default_value": "SV08" },
+        "retraction_amount": { "default_value": 0.5 },
+        "machine_max_acceleration_x": { "default_value": 40000 },
+        "machine_max_acceleration_y": { "default_value": 40000 },
+        "machine_max_acceleration_z": { "default_value": 500 },
+        "machine_max_acceleration_e": { "default_value": 5000 },
+        "machine_max_feedrate_x": { "default_value": 700 },
+        "machine_max_feedrate_y": { "default_value": 700 },
+        "machine_max_feedrate_z": { "default_value": 20 },
+        "machine_max_feedrate_e": { "default_value": 50 },
+        "machine_max_jerk_e": { "default_value": 5 },
+        "machine_max_jerk_xy": { "default_value": 20 },
+        "machine_max_jerk_z": { "default_value": 0.5 },
+        "retraction_min_travel": { "default_value": 1 },
+        "retraction_hop": { "default_value": 0.4 },
+        "machine_start_gcode": { "default_value": "G28\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nSTART_PRINT EXTRUDER_TEMP={material_print_temperature_layer_0} BED_TEMP={material_bed_temperature_layer_0}\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nM400\nG91\nM83\nM140 S{material_bed_temperature_layer_0} ;set bed temp\nM104 S{material_print_temperature_layer_0} ;set extruder temp\nM190 S{material_bed_temperature_layer_0} ;wait for bed temp\nM109 S{material_print_temperature_layer_0};wait for extruder temp\nG1 E25 F300\nG4 P1000\nG1 E-0.200 Z5 F600\nG1 X88.000 F9000\nG1 Z-5.000 F600\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 Y1 E0.16 F1800\nG1 X-87.000 E13.92 F1800\nG1 X-87.000 E20.88 F1800\nG1 Y1 E0.24 F1800\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 E-0.200 Z1 F600\nM400\nG90 ;absolute positioning\nM82 ;absolute extrusion mode\n" },
+        "machine_end_gcode": { "default_value": "END_PRINT\n" }
+    }
+}
diff --git a/resources/extruders/sovol_sv08_extruder.def.json b/resources/extruders/sovol_sv08_extruder.def.json
@@ -0,0 +1,19 @@
+{
+    "version": 2,
+    "name": "Nozzle Size",
+    "inherits": "fdmextruder",
+    "metadata":
+    {
+        "machine": "sovol_sv08",
+        "position": "0"
+    },
+    "overrides":
+    {
+        "extruder_nr":
+        {
+            "default_value": 0,
+            "maximum_value": 1
+        },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}
diff --git a/resources/meshes/sovol_sv08_buildplate_model.stl b/resources/meshes/sovol_sv08_buildplate_model.stl
diff --git a/resources/quality/sovol/ABS/sovol_sv08_0.4_ABS_standard.inst.cfg b/resources/quality/sovol/ABS/sovol_sv08_0.4_ABS_standard.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = sovol_sv08
+name = Standard Quality
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = standard
+setting_version = 23
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 10
+cool_fan_speed_max = 30
+cool_min_layer_time_fan_speed_max = 30
+cool_min_layer_time = 4
+cool_min_speed = 10
+material_flow = 98
+material_max_flowrate = 21
+material_print_temperature = 270
+material_print_temperature_layer_0 = 280
+material_bed_temperature = 95
+bridge_settings_enabled = True
+bridge_fan_speed = 30
diff --git a/resources/quality/sovol/PETG/sovol_sv08_0.4_PETG_standard.inst.cfg b/resources/quality/sovol/PETG/sovol_sv08_0.4_PETG_standard.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = sovol_sv08
+name = Standard Quality
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = standard
+setting_version = 23
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 10
+cool_fan_speed_max = 30
+cool_min_layer_time_fan_speed_max = 30
+cool_min_layer_time = 5
+cool_min_speed = 10
+material_flow = 98
+material_max_flowrate = 17
+material_print_temperature = 235
+material_print_temperature_layer_0 = 250
+material_bed_temperature = 75
+bridge_settings_enabled = True
+bridge_fan_speed = 70
diff --git a/resources/quality/sovol/PLA/sovol_sv08_0.4_PLA_standard.inst.cfg b/resources/quality/sovol/PLA/sovol_sv08_0.4_PLA_standard.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = sovol_sv08
+name = Standard Quality
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = standard
+setting_version = 23
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 70
+cool_min_layer_time_fan_speed_max = 50
+cool_min_layer_time = 5
+cool_min_speed = 10
+material_flow = 98
+material_max_flowrate = 21
+material_print_temperature = 220
+material_print_temperature_layer_0 = 235
+material_bed_temperature = 65
+bridge_settings_enabled = True
+bridge_fan_speed = 100
diff --git a/resources/quality/sovol/TPU/sovol_sv08_0.4_TPU_standard.inst.cfg b/resources/quality/sovol/TPU/sovol_sv08_0.4_TPU_standard.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = sovol_sv08
+name = Standard Quality
+version = 4
+
+[metadata]
+material = generic_tpu
+quality_type = standard
+setting_version = 23
+type = quality
+variant = 0.4mm Nozzle
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 80
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 50
+cool_min_layer_time = 5
+cool_min_speed = 10
+material_flow = 98
+material_max_flowrate = 3.6
+material_print_temperature = 240
+material_print_temperature_layer_0 = 235
+material_bed_temperature = 65
+bridge_settings_enabled = True
+bridge_fan_speed = 100
diff --git a/resources/quality/sovol/sovol_sv08_global.inst.cfg b/resources/quality/sovol/sovol_sv08_global.inst.cfg
@@ -0,0 +1,30 @@
+[general]
+definition = sovol_sv08
+name = 0.20mm Standard
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = standard
+setting_version = 23
+type = quality
+
+[values]
+layer_height = 0.2
+speed_print = 600
+speed_wall_x = 300
+speed_wall_0 = 200
+speed_infill = 200
+speed_travel = =speed_print
+skirt_brim_speed = 80
+speed_ironing = 15
+speed_layer_0 = 30
+speed_slowdown_layers = 3
+acceleration_enabled = True
+acceleration_print = 20000
+acceleration_wall_0 = 8000
+acceleration_wall_x = 12000
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_layer_0 = 3000
+acceleration_travel = 40000
diff --git a/resources/variants/sovol/sovol_sv08_0.4.inst.cfg b/resources/variants/sovol/sovol_sv08_0.4.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+definition = sovol_sv08
+name = 0.4mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 23
+type = variant
+
+[values]
+machine_nozzle_size = 0.4
+