U-blox ZED-F9P GNSS logging scripts for OpenWrt and Single Board Computers.
UbxLogger is a suite of shell scripts and executables for logging data from a U-blox
ZED-F9P low cost GNSS receiver on OpenWrt routers and Single Board Computers such as the
Raspberry Pi.
Some of the things you can do with UbxLogger are
- Log data from one or more U-blox ZED-F9P receivers to a micro SD card, USB stick and/or disk partition
- Compress the data and save to an archive directory
- Optionally push the compressed data to a remote server over the Internet (requires LAN, WAN or 4-G connectivity)
- Optionally convert the data to RINEX version 3 files, at a selectable sample rate and interval, compress using Hatanaka compression and gzip, archive and/or push to a remote server.
- Start on (re)boot, monitoring and restart
You have have the choice to create compressed RINEX files on OpenWrt (or SBC) and push the RINEX to the remote server, and/or push ubx rawdata files to the remote server and convert to RINEX on the remote server. To transfer the compressed RINEX files, especially at a lower sample rate, requires only a fraction of the bandwith compared to ubx.
UbxLogger is designed to run on power efficient OpenWrt routers and Single Board Computers and
is written entirely in shell script with a few pre-compiled c executables . It is known
to work with
- The GL-iNet X750V2 (Spitz) OpenWrt 4G router
- Raspberry Pi single board computer and Teltonika RUT240 4G router
The total power consumption on the GL-iNet Spitz is below 3W, making this an ideal platform for solar powered operation.
Instructions on using the software, hardware recommendations, and installation instructions are
given in the docs/ folder.
Scripts, executables and modified source code are available as releases on this Github repository.
To install the UbxLogger software download the installation script, run and follow the instructions
curl -L https://github.com/hvandermarel/ubxlogger/raw/refs/heads/main/sys/ubxlogger_install_part1.sh -o install.sh
./install.sh
For more information on the installation and configuring the software see the manuals.
Copyright 2024 Hans van der Marel, Delft University of Technology.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this software except in compliance with the License. You may obtain a copy of the License at
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
The current release is at v1.0.
1. H. van der Marel (2024), UbxLogger Software Manual, TU Delft, September 2024.
2. H. van der Marel (2024), UbxLogger Hardware Manual, TU Delft, September 2024.
3. H. van der Marel (2024), UbxLogger GL-iNet Installation Guide, TU Delft, September 2024.