Using 4 pin RGB LED instead of Neopixel LED

[NoxiousMiner]

Could you please give me the code where I can use an RGB LED instead of Neopixel LED?

[welcome]

Thanks for opening your first issue here! 🎉
👉 Be sure to:
1. 📖 Have a look at the Wiki and README for information
2. 🔍 Search for similar issues (open and closed)
3. ✍️ Provide enough information to understand, recreate and help out with your problem
4. ℹ️ Let us know if you find a solution
5. 📕 Close the issue when your problem has been solved

[spacehuhn]

Hi, do you still need this feature?

[NoxiousMiner]

Hi Stefhan, Yes I'd love to have this feature as I wasn't able to find any Neopixel LED in my country so I'm stuck with 4 pin RGB LEDs

…

On Wed, Oct 20, 2021, 5:18 PM Stefan Kremser ***@***.***> wrote: Hi, do you still need this feature? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#69 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AMB2YYVRQDELDMICVVFJDFTUH2QR5ANCNFSM44SX5WVA> .

[spacehuhn]

Just pushed the changes necessary but I haven't tested it.
What you need to do:

1. download the project to get the latest files
2. open atmga_duck.ino
3. uncomment config.h line 45
4. uncomment line 46 if your LED has a common anode.
5. uncomment line 47-49 (you can change the numbers to the pins you have your LED connected to)
6. compile and upload the sketch to your atmega32u4 board

[NoxiousMiner]

I am gonna test it out in a few. Thanks for taking the time to reply and help me. You're a talented guy and you've inspired me a lot. Keep up the amazing work <3 Also I was rewatching your videos and wondering if you had any plans to make an All-In-One Device that has the wifi duck and Wifi Deauther in it. I was wondering if making a device like that was possible as the deauther and the duck both run on the ESP8266. So we could have an AIO device that functions both as a wifi duck and a deauther that can be run off of an interface. Would be cool to have a gadget like that.

…

On Wed, Oct 20, 2021 at 8:40 PM Stefan Kremser ***@***.***> wrote: Just pushed the changes necessary but I haven't tested it. What you need to do: 1. download the project to get the latest files 2. open atmga_duck.ino 3. uncomment config.h line 45 <https://github.com/SpacehuhnTech/WiFiDuck/blob/7ef2752d2527ffc6be5fbe9275709411a0179e8a/atmega_duck/config.h#L45> 4. uncomment line 46 if your LED has a common anode. 5. uncomment line 47-49 (you can change the numbers to the pins you have your LED connected to) 6. compile and upload the sketch to your atmega32u4 board — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#69 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AMB2YYVFAPS3ERYHE3MRJ4TUH3IFXANCNFSM44SX5WVA> .